SQLException The Server Failed To Resume The Transaction
Mar 24, 2008
Hello-
A customer has reported getting the following excpetion in our logs, and I have never seen it before and wanted to see if there was any insight you could provide to understand when you throw this exception.
The process is a "purging" process- it just executes a sequence of DELETE statements that should be fairly simple (delete a number of records from a table and CHECK some constraints, no cascading), after the sequence it commits. All of this occurs on the same connection. We use c3p0 for connection pooling.
Here is the exception:
2008-03-22 08:30:08,699 WARN impl.NewPooledConnection : [c3p0] A PooledConnection that has already signalled a Connection error is still in use!
2008-03-22 08:30:08,699 WARN impl.NewPooledConnection : [c3p0] Another error has occurred [ com.microsoft.sqlserver.jdbc.SQLServerException: The server failed to resume the transaction. Desc:9f00000002. ] which will not be reported to listeners!
com.microsoft.sqlserver.jdbc.SQLServerException: The server failed to resume the transaction. Desc:9f00000002.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.doConnectionCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$ConnectionCommandRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectionCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.rollback(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyConnection.rollback(NewProxyConnection.java:855)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:50)
at $Proxy15.rollback(Unknown Source)
at
In a high load asp.net environment, I am getting an error. The transation active in this session has been committed or aborted by another session.Here is the code , I am getting error. 1 object returnObject = null; 2 SqlTransaction sqlTrans = null; 3 try 4 { 5 //Getting new SqlConnection 6 comm.Connection = GetConnection(); 7 //Opening connection 8 OpenConn(comm.Connection); 9 //beginning transaction 10 sqlTrans = comm.Connection.BeginTransaction( IsolationLevel.ReadCommitted ); 11 //setting transaction to SqlCommand object 12 comm.Transaction = sqlTrans; 13 //executing operation 14 returnObject = comm.ExecuteScalar(); 15 //trying to commit. 16 sqlTrans.Commit(); 17 18 19 } 20 catch (SqlException sex) 21 { 22 if (sqlTrans != null) 23 { 24 sqlTrans.Rollback(); 25 } 26 } 27 finally 28 { 29 comm.Connection.Close(); 30 } Could you please explain , am I doing smthg wrong ?
While making a connection to a SQL server Enterprise Database using ASP.Net(C#), during execution of .aspx file i got the following error :-
Kindly help me if anybody knows the solution .
Thanks in advance
Login failed for user 'IT-CELLIWAM_IT-SERVER'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Source Error:
Line 52: //mycommand.SelectCommand.CommandType=CommandType.StoredProcedure; Line 53: DataSet ds=new DataSet(); Line 54: mycommand.Fill(ds); Line 55: DataTable dt; Line 56: dt=new DataTable();
Hi all, Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication: <%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %> <% Dim connAkaki As SqlConnection Dim cmdSelectAuthers As SqlCommand Dim dtrAuthers As SqlDataReader connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki") connAkaki.Open() cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest", connAkaki) dtrAuthers= cmdSelectAuthers.ExecuteReader() While dtrAuthers.Read() Response.Write("<li>") Response.Write(dtrAuthers("Firstname")) End While dtrAuthers.Close() connAkaki.Close() %>
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
when i browser the page on browser the following error dispaly " System.Data.SqlClient.SqlException: Login failed for user xxxx "sqlAdaptor , sqlconnection and dataSet are all fine. i can even preivew dataset, but i don't know while it doesn't display in browser.
System.Data.SqlClient.SqlException: Cannot open database requested in login 'MYKYTYNMDB'. Login fails. Login failed for user 'OMM_IUSER'. at System.Data.SqlClient.ConnectionPool.GetConnection (Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.Get PooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open() at DreamweaverCtrls.DataSet.GetConnection(String strConnection) at DreamweaverCtrls.DataSet.DoInit()
i have just exported all objects from one sql server to another and no matter how many times i check the password i keep getting this same error.. I KNOW for a fact that the password and username are correct and that they have all of the correct permissions.. what am i doing wrong?
I am having a very strange and frustrating problem with moving an application from Development to Production. I have been working on this application on XP with VS2005 with SQL Express on my local machine. Throughout the development lifecycle I have moved it to the Server multiple times to test things and everything has been working fine until this last time. What I have done since the last time: Added some ASP.NET AJAX functionality Added some views that I am having to fill a dataset from the dataset to manipulate the data before presentation. Everything has worked fine without any issues on my local machine with my local database. I just made backups of the databases and restored them on the server and have moved all my project files up to the server. I then installed the ASP.NET AJAX Extensions 1.0 on my 2.0 server.
NOW - The Problem: The entire site works fine, I can read data from every table of every database, and I can also write data to all the databases. However, this one page has a GridView that I pull data from the database and fill a DataSet with the data. I then manipulate the data, adding some data from other databases and then present it to the browser. This is working fine on my local machine, but since pushing this to the server I get an error: System.Data.SqlClient.SqlException: Login failed for user 'ext_access' Line 36: ad.Fill(ds, "CaskInfo")Line 37: Dim Table As DataTable = ds.Tables("CaskInfo")Line 38: Table.Columns.Add("Company", GetType(String)) I have checked the database and the SQL Server and the user listed above has the correct access to the database, which I would guess since everthing else is working fine. I use the same connection information throughout the app and it is stored in the web.config so I am certain nothing is wrong with my connection information. I access that information with the same code throughout the application as well so I know it is correct. I know this may not be the most trimmed piece of SQL code, but I figured I would post it incase there is something inefficient in my SQL that could be causing this. Here is my code leading up to the error. Dim conn As SqlConnection = CreateConnection2()Dim connectionString As String = conn.ConnectionString Dim myConnection As New SqlConnection(connectionString)Dim ad As New SqlDataAdapter("Select CaskID, CompanyID, SiteID, UnitIDVCC, UnitIDTSC, DATEPART(mm,DateLoaded)as Month, DATEPART(dd,DateLoaded)as Day, DATEPART(yyyy,DateLoaded)as Year, COCName, AmendmentName, HeatLoad, Dose, DryTime, Damaged, Debris FROM CaskInfo, COCInfo, AmendmentInfo WHERE CaskInfo.COC = COCInfo.COCID AND CaskInfo.Amendment = AmendmentInfo.AmendmentID", myConnection) Dim ds As New DataSet() ad.Fill(ds, "CaskInfo")
Using this connection code:Function CreateConnection2() As SqlConnection Dim conn2 As SqlConnection = New SqlConnectionconn2.ConnectionString = ConfigurationManager.ConnectionStrings("MainWeb").ConnectionString conn2.Open()Return conn2 End Function And this is the line in the web.config: <add name="MainWeb" connectionString="Data Source=N2K3APPS;Initial Catalog=NUTUGData;Integrated Security=false;Pooling=False;User Id=ext_access;password=zzzzzzz" providerName=".NET Framework Data Provider for SQL Server"/> Thanks!
I have searched all the forums on this issue and tried the other options but nothing seems to work. I have an IIS server using asp.net to connect to a SQL database on a separate server which also happens to be a domain controller(i.e. no local accounts). I have tried changing the connection string, web.config, etc. but I still can't get connected. I believe the issue is with the SQL security but I'm not sure.
<!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to false will improve runtime performance of this application. Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="c#" debug="true" />
<!-- CUSTOM ERROR MESSAGES Set customErrors mode="On" or "RemoteOnly" to enable custom error messages, "Off" to disable. Add <error> tags for each of the errors you want to handle.
"On" Always display custom (friendly) messages. "Off" Always display detailed ASP.NET error information. "RemoteOnly" Display custom (friendly) messages only to users not running on the local Web server. This setting is recommended for security purposes, so that you do not display application detail information to remote clients. --> <customErrors mode="Off" />
<!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None"
"None" No authentication is performed. "Windows" IIS performs authentication (Basic, Digest, or Integrated Windows) according to its settings for the application. Anonymous access must be disabled in IIS. "Forms" You provide a custom form (Web page) for users to enter their credentials, and then you authenticate them in your application. A user credential token is stored in a cookie. "Passport" Authentication is performed via a centralized authentication service provided by Microsoft that offers a single logon and core profile services for member sites. --> <authentication mode="Windows" />
<!-- AUTHORIZATION This section sets the authorization policies of the application. You can allow or deny access to application resources by user or role. Wildcards: "*" mean everyone, "?" means anonymous (unauthenticated) users. -->
<authorization> <allow users="*" /> <!-- Allow all users --> <!-- <allow users="[comma separated list of users]" roles="[comma separated list of roles]"/> <deny users="[comma separated list of users]" roles="[comma separated list of roles]"/> --> </authorization>
<!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="true" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="false" />
<!-- SESSION STATE SETTINGS By default ASP.NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;Trusted_Connection=yes" cookieless="false" timeout="20" />
<!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" />
<!-- ADDED BY YURI --> <identity impersonate="true" />
Hi, I am trying to create an asp.net web recruiting application for HR, which will give the users the ability to both copy/paste the Resume and cover letter in textbox and upload resume and cover letter, then submit it (which will be saved into SQL Server 2000 table). I am thinking to save Resume and cover_letter as Image data type columns in SQL Server. . Can someone give me a direction about how to save the uploaded resume and cover letter to table and if it's the easiest way to do it? . What to deal with different formats of uploaded resumes? I hope to limit to only Word or HTML . Since I also give user another option - copy/paste the resume and coverletter into a textboxes. Can I simply save the copy/paste resume and cover letter into text field column? Later, say, if any HR recruiter retrieve the text from database, will it concatonates everything together without line break? Any ideas is appreciated.
Hi all,I am trying to setup a VB.Net development environment on my desktop for one of the application which was already in the production for couple of years (some unknown contractor(s) developed and maintained it so far). The application works fine on the web.Visual Studio 2005, .Net 2.0, SQL 2000, SQL Server 2005 were installed on my desktop. When I try to build the entire application/solution in the debug mode (i.e., with http://localhost/), build succeeds and I could get to the login.aspx. When I try to login, I am getting an error in the Visual Studio at the following code;connection = New SqlConnection(connectionString) connection.Open() saying "Communication with the underlying transaction manager has failed", "System.Transactions.TransactionManagerCommunicationException was unhandled by user code". And the web browser displays the following error "Error HRESULT E_FAIL has been returned from a call to a COM component". When I try to connect the SQL Server 2005 with the same ConnectionString attributes by going to Tools>Connect to Database, it works fine. But, through application connection.Open() giving above errors. I have set the MSDTC properties (i.e., under Component Services>MyComputer Properties>Security Configuration) as below:-Enabled Network DTC Access, Allow Remote Clients, Allow Remote Administration, Allow Inbound, Allow Outbound, No Authentication required - selected, Enabled XA Transactions...& DTC Logon Account is "NT AUTHORITYNetworkService".Please help.Thanks in advance,Chandra
Distributed transactions were happily running between our SQL servers and then we installed Windows 2003 Server SP2 and all of a sudden we got this nice error message when attempting a remote data update via linked servers. I couldn't even run "BEGIN DISTRIBUTED TRANSACTION" without getting the error message. The full error message is:
"Enlist operation failed: 0x8004d00e(XACT_E_NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MSDTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager."
Apparently, SP2 disables network DTC access (how nice, I feel more secure knowing that my data can't be updated remotely anymore).
Solution:
From Control Panel | Add or Remove Programs | Add Remove Windows Components Select "Application Server" and click the "Details" button Check "Enable network DTC access" and click OK for however many prompts it takes to apply the changes.
****NOTE**** this change WILL SHUT DOWN SQL SERVER so plan accordingly (this would have been handy to know in advance since I ran it in the middle of the workday and everyone got disconnected).
I am using SQL server 2000 and I created a maintenance plan. I started the jobs manually for the first time to see if everything will do as it's supposed to do before the scheduel takes place.
The DB backup are successful. When I start the Transaction Log backup job it returns failed. But when I look on the actual server ine the default directory the transaction logs are there with the current date and time.
Why do I always get a failed message. It says in the job history - The job failed. The job was invoved by user xxxxx. The last step to run was step 1(step 1).
Does anyone have an idea why I get this message. Also it says that is notified me by net send and it never does.
I created a backup plan for transaction logs only to run every 30 minutes. It works great for all databases except the Master and my main database scdb_v2.
The routine backups up the other 3 databases with no issue.
I have a job to run every six hours to take the transaction log backup. but the job has failed. when viewed through view job history its giving the below error msg.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
I tried starting the job but its failing with the same error msg.
Had a weird error yesterday, can anybody shed any light on it.
I got the following error in a SQL 7(sp2) database. 'The log file for database 'IT2PROD' is full. Back up the transaction log for the database to free up some log space.. Error: 9002, Severity: 17, State: 2'
The Transaction Log has unrestricted file growth and auto grow file set and the disk has over 20gb of free space.
The only explanation I can think of is that the Log tried to extend during the hourly backup. Would this cause the above error ??? The backup file is usually about 80mb but was over 300mb when this happened.
I stored resume in database with datatype Image. But now i want to retrieve the resume becoz if user wants to edit their resume and again i shud store the updated resume into my database. Give me ideas...Thanks in adv!!
Often when I write a stored procedure, I encounter a situation where it will be really convenient if I can ignore an error and continue the execution of next SQL statement, especially when I know what kind of error it will generate. It's just like the effect of "On Error Resume Next" in VB.
Does anyone have any idea or have some knowledge to share? I would really appreciate.
I am using SQL Server 2005 and SQL Server 2000. Thanks.
I have a stored procedure containing iterating cursor in which iam inserting records in a table. My problem is that whenever any data mismatch occurs whole process gets stops. I want it should skip that error record and continue with next iteration. Like on error resume next in vb. Please suggest.
I have setup logshipping in sql 2005. i have a primary and secondary server only. Suppose for maintenace i bring primary down. . i have to manually bring the secondary server online. usnig restore databse with restore.
1) so far so good. But what now. How can i re-sync the old primary with the new primary?
2) can i return the original secondary back to standby mode so that the primary can resume its role and the log shipping process proceeds.
If we have a situation that the Mirror server is unavailable for a day....very unlikely, but it happens when servers are moved from one data center to another....Lets assume we are doing safety off (high performance mode)
Should we pause mirroring on the principal server?
When we pause, does the transaction log keeps growing ? Can we backup the logs ?
If we don't pause mirroring
Does the transaction log keeps growing ? Can we backup the logs ?
What we can expect we we bring online the mirror server next day! will there be any performanbce problems since mirroring will try to catch up....
Considering moving to mirroring from logshipping for our disaster recovery.
My application returns the following error when a SQL call is made during a transaction log backup. Cannot open database requested in login 'login_name'. Login fails.
Has anyone come accross this problem before? or maybe worked around it?
I have a publication on Sql Server 2012 that uses transactional replication to 7 subscribers (these are a mix of Sql Server 2008R2 and Sql Server 2012). Last night I scheduled the Snapshot job to run to "re-publish" the database to the subscribers. I had a few new table to push down. Unfortunately the snapshot job became the deadlock victim. Now updates to the publisher are not being sent to the subscribers.
Short of rerunning the snapshot job, is there a way to repair the replication so the updates to the publisher are pushed to the subscribers? The "re-publish" can only be run overnight when there is very little impact to users.
Bill Soranno MCP, MCTS, MCITP DBA Database Administrator Winona State University Maxwell 143
"Quality, like Success, is a Journey, not a Destination" - William Soranno '92
I get the following error in the SQL ErrorLog file and in the Event Viewer when using a J2EE web application deployed on BEA WLS 8.1sp5 using the Weblogic JDBC Type4 XA driver with MSSQL Server 2000 SP4
Enlist of MSDTC transaction failed: XACT_E_NOTRANSACTION.
The secondary server for my availability group was recycled. When SQL Server came back online the data movement for a database was suspended. The error log shows:
"AlwaysOn Availability Groups data movement for database 'XXXXXXXXX' has been suspended for the following reason: "system" (Source ID 5; Source string: 'SUSPEND_FROM_RESTART'). To resume data movement on the database, you will need to resume the database manually. For information about how to resume an availability database, see SQL Server Books Online."
I was able to resume data movement with no issue. I would like to understand the technical reason as to WHY the data movement was put in the suspended state and left there upon recycle. I searched for an article that would list possible reasons (BOL, Google, Bing, etc..). I just could not find much information out there on 'SUSPEND_FROM_RESTART'.
We are developing Asp.Net Application in following environment.
Windows 2003 Dot Net 2003 SQL Server 2000
Problem :
We have team of four people. We made one machine as database server and rest of the people trying to connect to that database server. we are getting error "SQL server not found.".
We are using following string as a connection string.
