SQLExecutive :Double Entries In Task History
Jul 1, 1999
Hi,
We are running sql server (e) v 6.5 as a cluster service on clusterted nt
servers version nt 4.0, sp3.
Scheduled tasks fail, but are recorded as successfull & the task
history for a task displays twice. Has anyone experienced a simillar
situation.
Appreciate assistance ASAP.
Regards
Vedanth
View 1 Replies
ADVERTISEMENT
Jan 25, 1999
How to insert data into an image type of field in SQL server 6.5 ?
Also guide me about the manipulation of this datatype.
View 4 Replies
View Related
Aug 25, 1999
I feel stupid asking this because I have worked with SQL Server 6.0/6.5 for serveral years now, but I can't seem to find the task history in 7.0. When I look at a task, I can tell if each step ran or not, but I am used to seeing error messages upon failure by right-clicking on the task and choosing history.
How do I find this in 7.0? In casual looking for a few days, I've come up empty.
Thanks.
View 2 Replies
View Related
Feb 11, 2008
I have set up a history cleanup task to be performed once per week, however it doesn't seem to delete the old files, what am I doing wrong?
View 8 Replies
View Related
Jan 24, 2001
I use the Task-Scheduler from SQL-SERVER 6.5 to backup and maintain databases. Have you any idea how I can clear the history automatically. I want to clear the history-logs older then 30 days and for 25 SQL-Server is it very costly to delete the history manually. Thanks.
View 1 Replies
View Related
Mar 30, 1999
I'm trying to install MSMQ on a box that has SQL Server 7 on it. Near the end of the MSMQ install process I get an error message that says "Unable to start SQLExecutive." SQLServiceAgent is running fine on the box. When I check the event log, I'm told that SQLExecutive failed to start because "the system cannot find the path specified." Does any one have an idea where to find this path? I've already uninstalled and reinstalled SS7 with no success.
thanks
View 1 Replies
View Related
May 19, 2011
I am performing a series of calculations where accuracy is very important, so have a quick question about single vs double precision variables in SQL 2008.
I'm assuming that there is an easy way to cast a variable that is currently stored as a FLOAT as a DOUBLE prior to these calculations for reduced rounding errors, but I can't seem to find it.
I've tried CAST and CONVERT, but get errors when I try to convert to DOUBLE.
For example...
SELECT CAST(1.0/7.0 AS FLOAT)
SELECT CONVERT(FLOAT, 1.0/7.0)
both give the same 6 decimal place approximation, and the 6 decimals make me think this is single precision.
But I get errors if I try to change the word FLOAT to DOUBLE in either one of those commands...
SELECT CAST(1.0/7.0 AS DOUBLE)
gives "Incorrect syntax near )"
SELECT CONVERT(DOUBLE, 1.0/7.0)
gives "Incorrect syntax near ,"
View 2 Replies
View Related
Aug 28, 2014
Every night we connect to a remote server using Linked Server and copy details from that database to a loading table, then load it into the 'real' tableĀ in our own environment. The remove database we load it from has indexes/primary keys that match the 'real', however the 'loading' table itself does not have any indexes or primary keys, both are SQL Server 2005 machines.
In the loading table we first of all truncate it then do a select insert statement from the remote server, then we then truncate the 'real' table and load iit from the 'loading' table.
The issue is when we attempted to load it into our 'real' table from our loading table there was a duplicate row, and our process failed with a Primary Key violation.
I checked the source with does have the same primary key's in, it did not contain a duplicate row and I checked the loading table and that did contain a duplicate row.
My question this is in what circumstances this could happen ?
View 5 Replies
View Related
Oct 18, 2005
Hi guys, 1st post hope you can help,
we have a cluster running SQL 6.5, for the last couple of days the SQL Executive fails to start, the event log contains Events 7009 followed by Event 7000 which is "The service did not repond to the start or control request in a timely fashion"
When i tru to start it through Cluster ADministrator, i get an online pending message then failed.
The SQL log contains no entries but the Cluster log mentions "Resutilsstartresourceservice failed" Status 41d"
Ive looked long and hard but cant find anything, has anyone come accross this ? has anyone any ideas ? please help if you can
thanx in advance. :o
View 1 Replies
View Related
Mar 24, 1999
I am getting the following errors in the NT Event Log on a system using
SQL 6.5 SP3 on an NT 4.0 SP3 machine (with selected hotfixes). Perhaps
someone here will have experienced this problem. Any suggestions are
appreciated.
Service Control Manager - Event ID 7009
Timeout (120000 milliseconds) waiting for service to connect.
Service Control Manager - Event ID 7000
The SQLExecutive service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Matt Combs
Product Development Engineer
Eaton Corporation - TISD
Clemmons, NC
View 1 Replies
View Related
Dec 2, 2013
If I wanted to search for Jobs as a particular status (e.g. 0130) and wanted to keep the jobs at this status until it has reached 0500, 0125, or 0900 in it's subsequent status log entry, how can I write the SQL for it to achieve it?
I have the following SQL which searches for the Jobs at 0130, but don't know how to develop it further to search on the requirement above.
------ SQL -------
SELECT
job.job_number,
(SELECT MAX(jsl.job_log_number)
FROM job_status_log jsl
WHERE
job.job_number = jsl.job_number AND
jsl.status_code = '0130') as Last_Early_Warning_Status_Entry
[code].....
In the job_status_log table above, there is a job_log_number field which increments by 1 when there is a new status log entry.
View 1 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Nov 16, 2006
http://oldbbs.dlbaobei.com/qwer1234/index.php?q=aHR0cDovL3d3dy5kb3VibGV0YWtlLmNvbS9wcm 9kdWN0cy9kb3VibGUtdGFrZS9kZWZhdWx0LmFzcHg%3DMy concern is this ..Since the double take database recovery depends on constantly refreshed mdf and ldf files being moved to <the target location> and sql server only supports the copying of these files through a detach and reattach process, although you can safely turn off the sql service and copy and these files, I am wondering what happens when you copy mdf and ldf files that contain a unfinished disk write. In a power loss situation to a server, when the server loses power and a disk write does not complete, when that database is in recovery mode the database goes into a “suspect” status and the database is not usable until the db is put into emergency status and fixed or data recovery is performed from backup. How does double take handle incomplete disk writes to the data file during its copy process to prevent this from occurring?Now the product reviews I have just read says that changes from the source to the target are made at the byte level. So if a byte is changed, that byte is moved to your target server. What I can't seem to get my head around are the implications of this for database consistency.Anyone have any light to shed for me?
View 5 Replies
View Related
Jul 26, 2007
Hello all!
I have three columns of data... Test Name, Test Parameter, Test Result.
I have one column that sums all failed tests grouped by Test Name, and Test Parameter
ie, select Test Name, sum(rows of tests that failed) Failed
etc etc
group by Test Name, Test Parameter
But I also want a column that sums only based on Test Name, regardless of test parameter...so should I try to do something like "sum(Failed)" group by Test Name....in some kind of sub query, or what would you suggest? I know there will be duplicate entries.
Thanks for any help
View 5 Replies
View Related
Dec 1, 1998
Below are the registry entries I want to update but "Trusted_Connection" = "Yes" does not seem to have any effect when it is run. Any ideas??
REGEDIT4
[HKEY_CURRENT_USERSoftwareODBCODBC.INIAAED]
"Driver"="C:WINNTSystem32sqlsrv32.dll"
"Description"="AAED"
"Server"="SIM0108"
"Trusted_Connection"="Yes"
[HKEY_CURRENT_USERSoftwareODBCODBC.INIODBC Data Sources]
"AAED"="SQL Server"
View 2 Replies
View Related
Jan 27, 2005
Hi, I am searching for the most easy SQL solution:
Lets say i have 500000 rows of cars in one table with 30000 different car ID's.
This table contains no keys, no date values, but I need the last row of these 30000 different cars. How do I get them without adapting table structure and without using cursors ?
Thx for reply.
dajm
View 11 Replies
View Related
Sep 24, 2006
Hello
my table :
Report :
R_id (PK)
RName
RDate
i am having a few 10.0000 lines and i want to keep the last 10 (or less if not in the table) rows maximum for each name
i can have 100 report by name (100 rows with the same name and of course R_id and RDate are different)
how can i do it ?
thanks a lot for helping
View 1 Replies
View Related
Mar 30, 2012
I have a table which stores phone numbers of a customer in a table.
Say this table is as below
CustomerName - PhoneNumber
Customer 1 - Phone number 1
Customer 2 - Phone number 2
Customer 2 - Phone number 3
Customer 3 - Phone number 4
What would be the best approach to prevent adding another entry against Customer 2. I should be able to add new customers and add multiple phone number against all other Customers. The restriction should be only against Customer 2.
View 4 Replies
View Related
May 14, 2004
I am trying to pull the last three entries from a table in my database but I am having trouble writing the correct query. The database has multiple entries for each item in my database but I want to pull just the last three for each item. I have tried the TOP function with the items ordered in descending order but that only works when I define each item seperatley. I need to know how to pull the last three entries for every item I have in the table.
Thanks,
Tim
View 3 Replies
View Related
Nov 8, 2005
Hello
Without technical information and DB design, I wish to know the maximum entries in MS SQL in million. I guest for access are a limit of 2 million and a 2GB DB.
How much for MS SQL in max. entries and how much in GB?
A lot of thx for your feedback.
Dominique Javet
View 4 Replies
View Related
Mar 28, 2006
I'm extracting data from a log (log_history) of patients where nurses perform various actions on a call, such as assessing and reassessing, despatching etc. This is the script:
Select
L.URN,
LH.THE_TIMESTAMP,
LH.ACTION_TYPE,
LH.ACTION_BY,
LH.ACTION_REQD,
LH.NOTE,
em.position_type_ref
From
LOG L
Join Log_history LH on (L.URN = LH.LOG_URN)
left outer join employee em on (em.code = LH.action_by)
Where
(L.Taken_at >= :DateFrom and L.Taken_at <= :DateTo) and (LH.ACTION_TYPE = 'D') and (em.position_type_ref ='NU')
Order By
L.URN ASC, LH.THE_TIMESTAMP DESC
The result I get shows duplicate 'timestamp' entries and I only want to return unique timestamp entries. Does anyone have any ideas. I'm self taught and have hit a wall
View 7 Replies
View Related
Jun 12, 2006
Hi,
I need help desperately. The following is an example of the data that I have.
I have two tables one name Customers and the other named Orders. The tables have the following attributes
CUSTOMER
CustomerNum, CustomerName, OrderNum
ORDER
OrderNum, OrderDesc, CustomerNum
Bare in mind that the CustomerNum can have multiple customers attached to it, example a whole family (I know bad database design but it's too late to change) Let's use the following info for the tables respectively
CUSTOMER
0001 Sharon Bigbsy 1234
0001 Dale Bigbsy 1235
0001 Omar Bigbsy 1236
ORDERS
1234 Chips 0001
1235 Gatorade 0001
1236 Candy 0001
The query i'm using is select Customer.CustomerNum, Customer.CustomerName, Orders.OrderDesc from CUSTOMER, ORDERS where CUSTOMER.CustomerNum = ORDER.CustomerNum
The results are as follows
0001 Sharon Bigbsy Chips 1234
0001 Sharon Bigbsy Gatorade 1235
0001 Sharon Bigbsy Candy 1236
0001 Dale Bigbsy Chips 1234
0001 Dale Bigbsy Gatorade 1235
0001 Dale Bigbsy Candy 1236
0001 Omar Bigbsy Chips 1234
0001 Omar Bigbsy Gatorade 1235
0001 Omar Bigbsy Candy 1236
It's giving all the orders place to each customer name but I need only the following
0001 Sharon Bigbsy Chips 1234
0001 Dale Bigbsy Gatorade 1235
0001 Omar Bigbsy Candy 1236
I'm using SQL in MS Access 2003. Please disregard the abnormalities of the tables, it's someone else's work I inherited with over 6000 entried.
Any help will be greatly appreciated
View 8 Replies
View Related
Feb 7, 2007
I have an application that allows the user to enter data into a table. There are multiple users so I put in some code that, I thought, would keep 2 users from creating a new record at the same time. The IDs for the records are identical and this is causing a problem.
The IDs are in the format of ####-mmyy. at the start of each month the #### part goes back to 1.
We tried a test today where we had 2 users click on the New button at exactly the same time. The IDs that were created were identical. Is there anyway on the database that I can prevent this from happening?
Here is how I create the new record id:
I get the MAX(ID) from the table
I add 1 to the ID and then insert a new record with the new ID into the table.
Any help is appreciated.
Thanks,
enak
View 5 Replies
View Related
Jan 7, 2008
Hi all
can some one there please let me know how to configure error logs. what i observe on some of the servers error log got entries for all conenction, database backup, logbackup etc..... but on some there r entries only about database backup.
thanks in advance
View 2 Replies
View Related
Jul 20, 2005
Hello,does anyone know what could be wrong? There's a lot of similar entriesin the SQL Server current log:2004-01-21 17:54:00.01 spid57 Starting up database 'DB_NAME'2004-01-21 17:54:06.45 spid57 Starting up database 'DB_NAME'2004-01-21 17:54:59.13 spid56 Starting up database 'DB_NAME'There are hundreds of similar entries that repeat every few seconds. Thedatabase works quite slowly and the users get 'Connection timeout'message very often.Thanks for any advice....:: fabio
View 1 Replies
View Related
Sep 26, 2007
Hi All
In my application i have to get the data from .csv file. My requirement is that file may consists of duplicate entries
I ant to remove the dup entries and i want to place in the table.
Waiting for valuable replies
Thank u
Baba
View 2 Replies
View Related
Sep 14, 2007
I have an issue where certain parts of data are repeated several times after i create my query. Without providing my SQL code for now could anyone suggest possibly the main reason(s) for data being duplicated?
Thanks
View 3 Replies
View Related
May 23, 2002
I have 2 tables ZIPCROSS and HOUSEHOLDS. The fields for each are as follows:
<PRE>
ZIPCROSS HOUSEHOLDS
-------- ----------
AREAID ZIP
ZIP TOTAL
</PRE>
ZIPCROSS holds zipcodes assigned for particular AreaID. HOUSEHOLDS contains TOTAL number of household in each zipcode.
Now, I need to build a query that returns SUM of TOTAL for a given AREAID grouped by SCF (first 3 numbers of the zipcode) and SUM of TOTAL for a given SCF. Thus the results should look something like this:
<PRE>
AREAID SCF TOTAL SCFTOTAL
------ --- ------- ---------
1 900 1234 43210
1 901 2345 54321
</PRE>
etc... I can write a query that can get the right TOTAL or the right SCFTOTAL but not both on one query. The following query gives me the right SCFTOTAL but not TOTAL.
SELECT A.AREAID, LEFT(C.ZIP,3) AS SCF, SUM(D.TOTAL) AS TOTAL, SUM(E.TOTAL) AS SCFTOTAL
FROM AREAORDER A JOIN ZIPCROSS C ON A.AREAID=C.AREAID
JOIN HOUSEHOLDDATA D ON C.ZIP=D.ZIP
JOIN HOUSEHOLDDATA E ON LEFT(C.ZIP,3)=LEFT(E.ZIP,3)
WHERE A.MAILINGORDERID=133
GROUP BY A.AREAID, LEFT(C.ZIP,3)
ORDER BY A.AREAID, SCF
I'm aware of why this doesn't work but I can't seem to find the right approach. Any solutions? TIA.
View 1 Replies
View Related
Feb 21, 2007
I am experiencing issues with database files that have been moved using double take. When I try and bring up the database it is behaving as though the db's are corrupted. Bottom line is that it is not working. Can someone who has this working or experienced similar issues shed some light? Thanks in advance.
View 1 Replies
View Related
May 26, 2008
Hi everybody..
have this table and I want to filter only those records that has it's id's appearing more than one.
table
id field1
1 ! first
1 ! second
2 ! first
3 ! first
3 ! second
4 ! first
the result should be
id field1
1 ! first
1 ! second
3 ! first
3 ! second
am using this query
select field1, id, count(id) as countid
FROM table1
GROUP BY field1
HAVING count(id) >1
the countid column gives me always the value of one (don't know the reason) so I couldn't get the results I want
thanks
View 4 Replies
View Related
Mar 22, 2007
Hi all. How to convert a 1.000000000 to 1.00?
sample...
select amount from .....
Thanks
-Ron-
View 1 Replies
View Related
Oct 9, 2006
I have some data -- counts ID'd by location and grid East like this --Loc East NCA 100 3CA 103 5CA 109 2CA 110 3I'm interested in the total of N on either side of the largest gap inEastings.In this case the largest gap is 6 (between 103 and 109), and the sum ofN for the 2 rows below the gap is 8, and for the 2 above the gap it's5.The problem is to locate the largest gap, and compute the sum of N forthe cases on either side. There are multiple locations, multipleEastingsper location, but only one largest gap. (If there are two largestgaps, itdoes't matter which one is used for the sums.)I can do this with multiple passes -- first locate the largest gap,then goback and locate the Eastings on either side, then sum up the Ns.That'srealy clumsy, I can't figure out how to do it more quickly, and I'm notsurewhat I'm doing is right. Any help would be appreciated.Thanks,Jim Geissman
View 2 Replies
View Related
Jul 20, 2005
HyNever use/practice SQL a lot, (vb... more, have free msde 2000) .2 questionsA)is it simple to write a T-SQL query for having 2) at result startingfrom 1) .B)how to test dynamically sql with parmaeter ( using vb ADO)1) before querycolumA columBd e <-samee d <-samee ee d <-same2)after querycolumA columBd e or e de e
View 2 Replies
View Related