SQLServer Agent Job Looses Password !
May 14, 2007
Hi;
I have built packages on SQL Server 2005 using the Import/Export wizard. The basic aim is to import a table from an Oracle database into my SQL database. It was running fine until recently when they Oracle database was upgraded to 10g (i think), and now something is wrong. If I run the saved package as administrator, it runs fine, but when I run it as part of a Agent schedule job, it seems to loose the password. The error message is not very descriptive ("The job has failed."), so i might be mistaken.
Help anyone ?!
Jaco
View 1 Replies
ADVERTISEMENT
Apr 4, 2008
i have a few ssis packages which are scheduled as sql server agent jobs. now after a reboot of the server all the packages jobs don't work anymore. i had to reenter all the passwords for the connection manager in order to make them run again. ist there a way to store the passwords so that the keep available even after a reboot? because it's necessary to restart the server for maintenance resasons.
View 3 Replies
View Related
Apr 1, 2008
I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
View 9 Replies
View Related
May 30, 2001
I have taken over an existing SQL 7.0 server. It has current production systems running on it.
I need to *confirm* what the SQL Agent password is; what simple task or job can I setup that will require me to provide the SQL Agent password so that I can confirm that what I have been told it correct?
Or does someone have another technique.
Thanks,
Bobby
bobby@teamcomfluent.com
View 1 Replies
View Related
Nov 30, 2004
Is there a way to find out if a user has not changed his/her passord in more than 90 days. I need to find the date of last password change and days since last password changes.
Thanks in Advance.
View 7 Replies
View Related
Dec 28, 2006
hi,i need query to get my sqlserver username and password,please can any one give query for this
View 7 Replies
View Related
Jan 4, 2007
Hi..
Isn't this a bug?
Step 1) Create a package with ProtectionLevel = EncryptAllwithPassword or EncryptSensitivewithPassword, and set password in package.
Step2) In SQL Server Agent, Create a Job to call a package.
Step 3) IN SQL Server Agent, Scripting Job. In script, package password shows up...
---------------------------------------------------------------------------------------------------------------------------
USE [msdb]
GO
... ...
@os_run_priority=0, @subsystem=N'SSIS',
@command=N'/FILE "D:PackageWithPassword.dtsx" /DECRYPT "P@ssw0rd" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF',
@database_name=N'master',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
... ...
View 1 Replies
View Related
Sep 6, 2000
Hi, here is my Sql server Configuration:
1. Created an account for sql server named "accountName"
I am running sql server with no problem. Now I want to incorporate sql mail. so I created an eamil account. Can I use the sql server log name in SQLServerAgent, so both sql server and sql server agent use same account name, or I have to create a new account name for sqlserver agen?
Ali
View 1 Replies
View Related
Dec 25, 2007
what is the difference between sqlserver agent and sqlserver service........what are the things we need to know about them
View 1 Replies
View Related
Dec 25, 2001
Hi All,
Running Sql Server 2000 for Windows 98. How do I start the SQL Server Agent Automatically (that is at OS startup). Is there a way to do it at all ?
TIA.
Regards,
Kaushik.
View 1 Replies
View Related
May 4, 2002
In attempt to run the SQLServer Job Agent, the following error occurs:
An error 1068 (the dependency service or group failed to start) occured while performing this service opertion on the SQLServer Agent Service.
An user a/c with Administrator rights is assigned to the SQLServer Agent Service upon setup.
Any idea what is causing it?
Thanks in advance,
Ben
View 1 Replies
View Related
Jun 14, 2011
I'm having a problem with saving a password in a SSIS package that is accessing an Oracle database as an external data source. Â I experienced the problem that many people have had with the SSIS package not saving the Oracle password as expected. Â I successfully saved the Oracle datasource password (Password #1) using the "Encrypt sensitive with password" security setting and then setting a separate/new password (Password #2) for the SSIS package. Â I've imported this package into my Integration Services installation, and I can get it to run successfully by manually entering Password #2 when I open the package.
Now I want to pull the SSIS package into a SQL Job Agent, along with some other steps, to run on an automatic schedule. Â My question -- how/where do I embed Password #2 (the one for the SSIS package) in the settings for the SQL Job Agent step that I use to run the SSIS package? Â The SQL Job Agent step settings box prompts me for Password #2 before it will let me edit settings for the package, but it doesn't save that password. Â So when I actually run the whole job, the SSIS package always fails.
View 13 Replies
View Related
Oct 11, 2007
the password of sa account is empt
I use "sqlcmd -S servername -U sa " command but failed
any suggestions?
thanks
View 8 Replies
View Related
Nov 21, 2006
hi
i have created a username and a password in sqlserver 2000 from logins in Enterprise manager
and i permit him to the database i need to connect to ..
and i check all server roles for that user and i make sqlserver authentication for him with a password and then i goto the udl file to connect to that database using that user it fails !! and says
"login failed for that user 'myusername' reason not associated with a trusted sqlserver connection"
while i use NT integrated security it works well
so how can i connect to sqlserver using a username and a password
thanks in advance
View 3 Replies
View Related
Mar 24, 2004
To run a remainder service that shoots a mail once everyday to all users of a subscribed service satisfying a pre-determined criteria, I'm planning to use a Sql Server Agent Job. In the first step of the Job, I'll have a stored procedure that gets all the records matching that criteria & store it in a table.
In the next step, I want a Windows Service (as there need not be any interface & my project requires easy deployment & minimal manual intervention) to fetch the records from the above table & shoot mails to users of the subscribed service. Several thousand mails may have to be sent this way. In order not to strain Sql server & also avoid extended stored procedures due to safety reasons, I'm considering using this windows service.
I want to know
1) how to make the Sql Server Agent execute the Windows service?
2) abt code or resources on how to write a vb.net Windows service that will work through a recordset & send mails.
3) from a perfomance point of view, if this method is feasible? If not, what are the other efficient alternatives.
View 1 Replies
View Related
Feb 26, 2008
i have result set from such query :
resultSetOptions = System.Data.SqlServerCe.ResultSetOptions.Scrollable | System.Data.SqlServerCe.ResultSetOptions.Updatable;
queryText =
SELECT agvb_id as ID
,agvb_cat_id as Category
,agv_brn_id as Brand
,agvb_brn_name as BrandName
,agv_brn_area as Area
,agv_brn_sku_qty as SkuQuantity
,agv_brn_qty as Quantity
,agv_orderliness as Orderliness
,agvb_importance as Importance
FROM AGENTS_VISITS_BRANDS
WHERE (AGENTS_VISITS_BRANDS.agvb_agv_id = @agv_id)
AND (AGENTS_VISITS_BRANDS.agvb_cat_id = @dad_id)
ORDER BY agvb_brn_name
if i open resultSet with such qury it looses its updatable option.
If i remove from where 1 param (no mater which) everything runs ok.
View 1 Replies
View Related
May 29, 2008
I've written an asynchronous script component and I have created the output buffer. 500,000 rows go into the input but only 1500 to 2000 rows come out berfore I get an SSIS Object reference not set to an instance of an object Error. The error occurs at the AddRow method of the outputbuffer (that's how I know it's gone). Why does this happen? Is there a way to sync up the output buffer with the input buffer?
View 25 Replies
View Related
Jul 24, 2015
I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.
View 3 Replies
View Related
Jun 18, 2007
I am receiving the following error message when attempting to create a new SQL Authenticated login id.
Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)
I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.
CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON
All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.
Any ideas as to a root cause?
View 5 Replies
View Related
Jun 30, 2007
I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.
Thanks,
Amilcar
View 6 Replies
View Related
Nov 30, 2006
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
View 1 Replies
View Related
Mar 11, 2008
On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?
Thanks,
Brian
View 1 Replies
View Related
May 10, 2007
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
View 1 Replies
View Related
Sep 20, 2006
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
View 1 Replies
View Related
Apr 18, 2008
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
View 1 Replies
View Related
Nov 30, 2006
Hi All,
I would appreciate any help here at all. I am pulling my hair out!
I am unable to start the snapshot agent or log reader agent from within SQL management studio. it fails on executing step 2 with unknown username or bad password.
I have checked all account details and they are correctly using my domain admin account. I can connect to SQL using teh same account and it also has sysadmin permissions.
If i copy the step 2 paramters and start from the cmd prompt (again logged in using the same domain account) they both start fine.
Any ideas would be gratefully received.
View 1 Replies
View Related
May 18, 2007
I am testing peer to peer replication in our environment. I simulated a three node peer to peer topology and a local distributor.
For some wierd reason I cannot get the Log Reader Agent and snapshot agent to start. The domain account under which SQL Server Agent runs has administrator previlage on the box. I also use a domain account for SQL Server Service. (none of the passwords changed).
This is the error I am getting - "Executed as user: abc. A required privilege is not held by the client. The step failed"
Any ideas???
Also this domain account is a member of
SQLServer2005MSSQLUsers$ServerName$MSSQLSERVER
SQLServer2005MSAgentUser$ServerName$MSSQLSERVER
View 3 Replies
View Related
Feb 19, 2007
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
View 4 Replies
View Related
Jul 29, 2005
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies
View Related
Jun 14, 2006
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
View 1 Replies
View Related
Feb 9, 2006
Hello,
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
Thanks in advance,
TassosTS
View 1 Replies
View Related
Jun 2, 2014
I put this together to export the user name /password to a csv file to test my SP to output the user name/password.
DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'
This works but I don't get the headers in the file. How can I include the headers?
View 7 Replies
View Related
Jun 20, 2007
Hello people.
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Can someone help me find a solution to this?
View 1 Replies
View Related
