SQLServer And Network Shares
Jul 23, 2005
Hi,
My SQL server is short on disk space and I need to create a new instance
of SQLServer. I had another server running Linux with enough space left
so i create a new partition on it and shared it through SAMBA.
Now I can use this shared disk in RW mode from the SQL server (tested OK).
However, when i try to create another database on this network share,
SQLServer denies the operation.
Does anybody have a clue about what's going on?
Isn't it possible to set database files on a network share?
Regards.
CH COLLIN
View 2 Replies
ADVERTISEMENT
Jul 15, 2015
Any specific risks in placing database files on network shares on a windows server (2008 R2). I have read its a bad design, but unsure why, or what problems such a setup may cause?
View 4 Replies
View Related
Oct 29, 2007
I'm having trouble trying to access a network share that comes via a UNIX server running SAMBA. In the first case, I'm running on my local workstation (A), connected to a remote server (B), and attempting to access directory information for a path like:
\a0amsimmsworkseaborg argets11as2981
This path is fully accessible by me from the workstation (A) and the server (B). The files and directories below "work" in the above path are also wide open on the UNIX side (meaning r-xr-xrwx permissions). However, if I attempt to do something like this:
Code Block
WindowsIdentity newID = SqlContext.WindowsIdentity;
WindowsImpersonationContext impersonatedUser = newID.Impersonate();
bool sim_dir_exists = false;
try
{
impusername = Environment.UserName;
Directory.GetFiles(mdcfullpath);
}
catch (Exception e)
{
impersonatedUser.Undo();
SqlContext.Pipe.Send("Exception getting data: " + e.ToString());
SqlContext.Pipe.Send("CWD is: " + Directory.GetCurrentDirectory());
SqlContext.Pipe.Send("User is: " + impusername);
}
finally
{
impersonatedUser.Undo();
}
The "GetFiles" fails with the following exception:
Exception getting data: System.UnauthorizedAccessException: Access to the path '\a0amsimmsworkseaborg argets11as2981' is denied.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalGetFileDirectoryNames(String path, String userPathOriginal, String searchPattern, Boolean includeFiles, Boolean includeDirs, SearchOption searchOption)
at System.IO.Directory.GetFiles(String path, String searchPattern, SearchOption searchOption)
at System.IO.Directory.GetFiles(String path)
at StoredProcedures.mdcinfo(Int32 sim_id, String mdc_base)
CWD is: C:WINDOWSsystem32
User is: amsimms
Initial is: dbserver
Interestingly, if I run the procedure directly on the server (B), I do not get the exception. So this seems to be more of a delegation problem. The server B's sql server instance is running as a domain account (dbserver), which has been enabled for delegation and an spn has been set up. Is there something beyond this either with the impersonate or delegation configuration that I need to do in order for this to work?
Thanks,
--Andrew
View 5 Replies
View Related
Sep 21, 2007
We have some to-disk backups scheduled on our 2000 Enterprise machine - nightly fulls, hourly logs - that go to a network share located on another machine. They were originally stored directly on the same machine as SQL Server, but we changed them to a remote destination within the past few weeks. This works okay, but despite having the maintenance plan set to remove files older than 2 days, old files don't seem to be removed. Understandably, this gets to be a problem when the backup disk becomes filled.
Is there any obvious reason why this option wouldn't work against a network share? I've checked the directory permissions, and the SQL Agent domain account should have no trouble deleting the files.
View 1 Replies
View Related
Oct 4, 2007
Hello All,
I am working for a company with approx. 5000 computers(Mix of Win2000+WinXP-PRO). I am asked to write some script or find some kind of tool or mehanism to scan the network to see how many PCs are running SQLServer ( Any version -- may be Desktop/Standard Edition). Is there any such way/script/tool anyone knows here . Please share your experience.
Thanks A lot.
R
View 10 Replies
View Related
Apr 23, 2008
I am having difficulty getting both xp_cmdshell and the Scripting.FileSystem to work via sp_OACreate/sp_OAMethod with files residing on network drives . I am able to create/move/copy/delete files on local drives through both of these methods, but when I specify a network drive as the target an operation requiring write access I get an "Access is Denied" error. I recognize that the SQLServer service account is being used to perform these operations, and I have granted Full control permissions to this user on the directory I'm trying to perform the operation on. Is there some other permission either on the SQLServer or Windows account that is required to enable write access from T-SQL?
--Listing of network directory works fine:
EXEC xp_cmdshell 'dir \Gol-devftprootgolsolgolEngMaint';
GO
Volume in drive \Gol-devftproot has no label.
Volume Serial Number is 5493-88CD
NULL
Directory of \Gol-devftprootgolsolgolEngMaint
NULL
04/23/2008 12:37 PM <DIR> .
04/23/2008 12:37 PM <DIR> ..
03/28/2008 01:56 PM <DIR> 40083388
04/23/2008 12:37 PM <DIR> 4008343A
04/23/2008 11:05 AM 230 4008343a.task
12/18/2007 12:15 PM <DIR> 4008CE92
04/23/2008 08:41 AM <DIR> 4008D108
04/22/2008 06:40 PM <DIR> 4008D134
04/21/2008 02:46 PM <DIR> 4008D15D
03/05/2008 10:14 PM <DIR> 4008D1BA
02/12/2008 04:41 PM <DIR> 4008D1FA
10/29/2007 11:06 PM <DIR> 4008D583
04/21/2008 02:41 PM <DIR> CMU
04/22/2008 02:25 PM 313 ESN_All.task
09/05/2007 11:22 AM <DIR> HotSpot
04/23/2008 07:25 AM <DIR> M4008CEC7
04/23/2008 07:56 AM <DIR> M4008D1BC
04/22/2008 05:24 PM <DIR> M4008D1CF
04/21/2008 02:43 PM <DIR> MEU3
04/21/2008 02:43 PM <DIR> Tools
2 File(s) 543 bytes
18 Dir(s) 25,083,801,600 bytes free
-- Local copy works fine...
EXEC xp_cmdshell 'COPY C:TestLoad4008D1FA4008D1FA.TASK C:Temp';
GO
1 file(s) copied.
-- Copy to network drive fails
EXEC xp_cmdshell 'COPY C:TestLoad4008D1FA4008D1FA.TASK \Gol-devftprootgolsolgolEngMaint';
GO
Access is denied.
0 file(s) copied.
View 8 Replies
View Related
Dec 28, 2007
Hi.
i got an error when i connect to sqlserver 2005 db with use of Sqlserver ManagementStudio.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)(Microsoft Sql Error - 64)...
View 4 Replies
View Related
Aug 24, 2005
Hi, i need some help, i have a problem trying to access data in my local network.
I have a PC with ms windows server 2003 and ms sql server 2000, and i want that the others PC in the network can access the data. I installed the client sql server in the others PC, but i can't make it work. What i have to do?
Thanks
View 5 Replies
View Related
May 2, 2014
I've been trying to access the file table shares exposed on a server (I can select, delete, update, etc via SQL) via untransacted access with no luck (the share just sits there doing something when I try to access it, no error message of any kind).
So I thought I'd look to see if there were any open file handles via
SELECT * FROM sys.dm_filestream_non_transacted_handles;
I found there were 10 non transacted handles open, and they've been open for 3 days for automated processes and the files are about 1-2Kb in size.
so I tried to kill them via
exec sp_kill_filestream_non_transacted_handles
that's normally not something that takes very long (in fact when I cleared two for a different database it took just a second or two).
So leaving the stored proc running, I figured I'd connect and fire up Adam Mechanic's sp_whoisactive.
I see the processes to kill the open file handles, with a wait state of FFT_NSO_FILEOBJECT
View 2 Replies
View Related
Sep 30, 2004
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
View 2 Replies
View Related
May 19, 2004
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
View 4 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
May 26, 2007
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies
View Related
Oct 4, 2007
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies
View Related
Feb 8, 2004
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
View 2 Replies
View Related
Jan 9, 2006
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
View 5 Replies
View Related
Oct 11, 2006
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows:
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
View 1 Replies
View Related
Aug 16, 2005
Hi,I am getting the following error (When i am trying to update the column thru windows service) Please let me know the solution for the following.The following error is comming only when i set CommandTimeout to infinity (Commandtimeout=0).General network error. Check your network documentation. Number 11 Procedure ConnectionRead (recv()). Class 20 State 0 Source .Net SqlClient Data Provider Server Line number 0 Thanks and Best RegardsNagaraju A
View 2 Replies
View Related
May 10, 2007
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
View 1 Replies
View Related
Sep 20, 2006
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
View 1 Replies
View Related
Apr 18, 2008
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
View 1 Replies
View Related
Jul 29, 2005
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies
View Related
Jun 14, 2006
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
View 1 Replies
View Related
Feb 9, 2006
Hello,
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
Thanks in advance,
TassosTS
View 1 Replies
View Related
Jun 20, 2007
Hello people.
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Can someone help me find a solution to this?
View 1 Replies
View Related
Apr 18, 2007
Regarding KB935356, is there a "post" service pack 2 update for SQLServer Express?
Thanks.
View 7 Replies
View Related
Jul 8, 2006
Hello Expert!
I have 2 Database €“ Access & SQLServer(ver 7)
I need to Import Data TblShift from Access to SQLServer €“ using DTS I€™ve done this successfully!
Now I want to use parameter so I only importing record within range (e.g. ShiftDate BETWEEN 05-24-2006 AND 06-23-2006)
In SQLServer, I have created table to store the date range as following:
TblParameter
DateFrom: 04/24/2006
DateTo: 05/23/2006
How do I use the date range from TblParameter(SQLServer) to import record from TblShift(Access) using DTS?
Is this possible or any better solution for this?
TIA
Regards,
View 4 Replies
View Related
Jul 28, 2007
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
View 5 Replies
View Related
Dec 29, 2005
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
View 1 Replies
View Related
Jun 6, 2007
Hi,
I am new to SQL Server 2005. I tried connecting to my local machine by using my machine name as Server name and then tried running the following query:
SELECT * FROM SYS.Objects. It gives me following error:
Invalid object name 'sys.objects'.
Whereas, if I connect to my local machine using mahcinenameSQLEXPRESS, then the above mentioned query runs fine.
Why is this difference? What is the difference when I login in these 2 different ways.
Any help would be appreciated.
Thanks in advance.
Any help
View 1 Replies
View Related
Mar 29, 2006
Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?
thanks,
Henk
View 7 Replies
View Related
May 9, 2006
Hi every body,
I have SQLServer 2005 runs well for months and stop working after install SqlServer2005 SP1. I try to reinstall the SQLServer 2005 but I have problem when install work station component on my and the error is "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor". Please help me to fix this bug. I do not want to reformat my machine.
John Dang
View 1 Replies
View Related
Jul 20, 2005
We are developing with SQL 7 Developer Edition and planning to installMSDE with the VB application. We received the following question fromthe IT dept. of our client:"Does your version of SQLServer database work well across a framerelay wide area network?"Should there be any problems regarding speed, etc.?Thanks!Ernie Adsett
View 2 Replies
View Related
