When I removed/re-installed SQLServer 2005 (Express) all of my dll's related to SQL Server disappeared from C:ProgramFilesMicrosoft SQLServer90SDKAssemblies: .ConnectionInfo, .Smo,.SMOEnum,.SQLEnum,.WmiEnum that I know of - maybe more.
How can I re-install these? Are they in the SQL kit, VB, SDK ???
Any help would be appreciated.
Today when I tried to troubleshoot a failed job, I found out that the job history is disappreared. Some jobs' history still exist. Does anybody have idea what happened? How can I fix it?
Thanks a lot.
Hi,
We had 5 instances of SQL Server running on one of our machines and everything looked to be working fine. Today I installed another instance for a new application and once done and rebooted the new instance didn't show in the SQL Server Enterprise Manager. At this point we decided to uninstall it. After that 4 of the existing instances have diapered as well even though they are running and responding requests from their respective applications.
I did some googling and all I could see is something related to a command called nscontrol but I couldn’t find any nscontrol executable on that machine.
Does anyone have any idea what this problem could be?
Thanks
Hi All,
I encountered a bizzard situation. The guest id in tempdb disappeared after I rebooted (shutdown and startup) my server. That caused errors in application whenever a stored proc needs to create a temporary table.
Has anyone seen this happened before? Any idea on why or how it happened?
Thanks in advance.
On Tuesday the SQL Server Counters showed up in Performance Monitor. Yesterday they were gone. Is there any way they could have disappeared other than someone explicitly deleted them? How would I go about restoring them? Obviously, I'm concerned.
Thanks for the help.
I have a stored procedure that for some reason disappeared on me. When I do “select * from the sysobjects”, it’s there. When I look at it from the EM, it’s not there. I refreshed everything a lot of times. Here is the data I get from the sysobjects:
myproc90587511U 141610615041224002002-01-26 15:41:13.44702240U 18302002-01-26 15:41:13.447000005200
Any help would be greatly appreciated.
We setup a number of roles with access rights to tables in the DB. This week for some unknown reason, rights on these roles disappeared.
We had to run a restore to reset the roles in the database. After the restore, we could not reproduce the problem.
Are there scenarios to avoid that would cause rights to drop from roles and users? (These rights were gone not just hidden)
Tim.
Hello,
I was modifying some standard reports of one planning program, by downloading .rdl file from report server and creating a new report project. I have done so many times.
Last weak in one of those new reports only header of the report was seen in the report server as I thought I had made some kind of mistake tried to look for it, and after some time the problem fixed itself and I blamed everything on one mixed up connection between the tables in the report, because after removing it the problem fixed itself, but now I think that was just a coincidence.
This weak after working fine for about a weak, 6 reports appeared as only headers and footers, they worked fine yesterday and no changes were made to the reports, but in the morning only the header is seen.
The reports that are affected are the 4 new ones, and 2 original ones, they are all dealing with the same date just different grouping and sorting.
Does anyone know how to fix this problem?
Darius
hi,
i have starange problem here.
i have total 10 nt groups mapped to security manager.
today when i opened security manager it is saying no groups
in the security manager,security manager is blank.
i am using mixed security mode.
pls give me any ideas..
it is very ugent pls..
Thank u very much
--Kavira
hello,
am not sure if this is the right forum to post this.
We have a couple of sites running MS SQL, however we have never had issues with data corruption.
I was working with a certain site and then noticed that all users in the users table were missing except one.
Secondly, the users table had all permissions revoked.
how did this happen and whats the best way to go about restoring it.
Ehi
Suddently System Databases Folder is not showing on Studio 9.0 for all the SQL servers instance. Do you know why ? Is there any option other than De-attach them?
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies View RelatedI have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
Hello,
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
Thanks in advance,
TassosTS
Hello people.
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Can someone help me find a solution to this?
Regarding KB935356, is there a "post" service pack 2 update for SQLServer Express?
Thanks.
Hello Expert!
I have 2 Database €“ Access & SQLServer(ver 7)
I need to Import Data TblShift from Access to SQLServer €“ using DTS I€™ve done this successfully!
Now I want to use parameter so I only importing record within range (e.g. ShiftDate BETWEEN 05-24-2006 AND 06-23-2006)
In SQLServer, I have created table to store the date range as following:
TblParameter
DateFrom: 04/24/2006
DateTo: 05/23/2006
How do I use the date range from TblParameter(SQLServer) to import record from TblShift(Access) using DTS?
Is this possible or any better solution for this?
TIA
Regards,
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
Hi,
I am new to SQL Server 2005. I tried connecting to my local machine by using my machine name as Server name and then tried running the following query:
SELECT * FROM SYS.Objects. It gives me following error:
Invalid object name 'sys.objects'.
Whereas, if I connect to my local machine using mahcinenameSQLEXPRESS, then the above mentioned query runs fine.
Why is this difference? What is the difference when I login in these 2 different ways.
Any help would be appreciated.
Thanks in advance.
Any help
Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?
thanks,
Henk
Hi every body,
I have SQLServer 2005 runs well for months and stop working after install SqlServer2005 SP1. I try to reinstall the SQLServer 2005 but I have problem when install work station component on my and the error is "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor". Please help me to fix this bug. I do not want to reformat my machine.
John Dang
When I am trying to insert values into a table which is created using Sql Server.
I am gettin Sql Exception : " String or Binary Data would be truncated.The Statement has been terminated. "
Please help me out to trouble shoot this error.
With regards
Khasim
Good day ... I need to know how to make a LOB column in sqlserver...
In table creation I definde the column that will receive the binary data as nvarchar(MAX)
the problem now that whenever I try to read it back I get this error
Unable to cast object of type 'System.String' to type 'System.Byte[]'.and when I define the column as varbinary(MAX) it cant real handle large objects
I have a method that will return a DataTable Here's the code that I use to write
DataTable dt = fm.getFileData(fileID);Response.ContentType = dt.Rows[0][4].ToString();Response.BinaryWrite((byte[])dt.Rows[0][2]);
Thanks in advance ...
what are the minimum tables required to many to many relation ship?
View 2 Replies View Relatedwhen i delete the row from VB using transact sql statement
it returns with an error 'TIMEOUT EXPIRED'
hi,
I have a dynamic table in DB2 which I want it to Sychronize it into SQL Server. I was thinking to Dump the Changes and New data into a flat file and Pull that flat file thru DTS...IS that a right way?
OR
Just Pull changed and new data it with the help of CR DB2 ODBC drivers periodically...
or
Any other way? Pelase Advice the Right Choice
Thanks in Advance for Help
Aakash
Hi,
I am interested in getting a MCP (for MS SqlServer, Exam #: 70-028),Can someone refer me some good book and sample tests for preparing for this exam.
Thanks
Ellen
> Hello,
> Is there a possibility for password expiration in SQL 6.5?
> Thank you
I have a choice of working with either SQLServer or Oracle within my company. I need to advise them which way to go. I need to support a couple of hundred users in a mixed workload environment (OLTP, Batch & Reporting)
The O/S will be Windows 2003 Server. My understanding is that Oracle is the better database technically but SQLServer is cheaper and easier to integrate with other MS technologies. My company will most likely buy into whatever technology will deliver value for money but also be secure and be able to scale.
Any views gratefully received.
We're starting to think about migrating a 2000 32-bit sql/server to 64-bit (probably 2005). Performance gains are tempting when it can easily be bought, almost a management mantra . I've been doing some reading about the pro's and con's, most of what I've found is pro, very little on the con.
My impression is that the 64-bit version(s) is faster in most case, if not all. It would seem that most of the performance improvement is gained by the heavier equipment and overcome memory limitations. Too me, it looks like the integration of hw/os/sql is made very tight on 64-bit, more than 32-bit, which might be the main reason for the improvements.
Call me skeptical but I'm looking for some more con's and a little less on the "great, fantastic, improved and hoorah" that I've been reading. Anyone out there returned to 32-bit after a 64-bit disaster?