SQLVDI.DLL File - Looking For Version 2000.85.2102.0
Apr 23, 2008
One of our server administrators was told by a software supplier that we needed the above .dll (the exact version specified) to get a shadowcopy program to work (??!!). Anyway, there is a SQL 2005 hotfix that you can request which says that it contains this dll (SQLServer2005-KB936305-x86-ENU). I unpacked it, but couldnt find the correct version in any of the cabs, so I set up a vanilla SQL 2005 install, service packed it and added this hot fix - guess what? the dll is there, but version 2000.85.2004.0.
I am at the end of my tether - can someone point me to a download location where I can get this file please?
I've inherited a SQL 2005 Server with SP2 installed that throws this error whenever it's backed up via EMC Insignia's Retrospect 7.5:
Source: SQLVDI Event ID: 1
SQLVDI: Loc=IdentifySQLServer. Desc=MSSQL$DATALIBRARY1. ErrorCode=(1060)The specified service does not exist as an installed service. . Process=4788. Thread=4672. Client. Instance=DATALIBRARY1. VD=.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
---------------
As far as I can tell, the name should be DATALIBRARY, not DATALIBRARY1. Is there a way to change that reference without having to uninstall / reinstall?
I wanted to prevent ntbackup from locking my databases during the nightly backup, so I excluded the ...Data folder from the backup set. However, I think that ntbackup is backing up the databases during the volume shadow copy phase of the backup, even though their folder was excluded from the backup set (I verified this setting in the .bks file). Although the lock only lasts a few seconds, the error message is worrisome and I would prefer to skip the databases completely. How can I stop the volume shadow copy from doing this?
Below is the the sequence of events leading up to the error, most recent first:
Event Type: Error Event Source: SQLVDI Event Category: None Event ID: 1 Date: 3/23/2007 Time: 3:01:49 AM Description: SQLVDI: Loc=CVDS::Cleanup. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. . Process=8684. Thread=7556. Client. Instance=. VD=.
Event Type: Information Event Source: MSSQLSERVER Event Category: (6) Event ID: 18264 Date: 3/23/2007 Time: 3:01:48 AM Description: Database backed up. Database: master, creation date(time): 2007/03/12(15:08:23), pages dumped: 1, first LSN: 268:352:37, last LSN: 269:24:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{66DC3082-FB76-4312-AD74-4BDAD9FC7209}1'}). This is an informational message only. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3198 Date: 3/23/2007 Time: 3:01:47 AM Description: I/O was resumed on database master. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3197 Date: 3/23/2007 Time: 3:01:45 AM Description: I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
I have inherited several SQL 2000 servers, based upon the results of @@version, is there a reference or table I can use to tell which service pack is installed on the machines?
Hi.I would like to version control my data in SQL 2000. Currently I'vestored the data/time info of my data whenever I add or edit the table.Are there such built in support in SQL 2000? If not, anyone care toshare some tips and tricks to perform version control with SQL 2000?Thank you.
Our company currently use Microsoft SQL Enterprise Manager 8.0, SQL Query Analyzer 8.00.194. Do we need to upgrade to later version? If we do, what kind of problem/effect we may have? Will it make any difference of SQL Server performance? Please give your opinion. Thank you.
I installed SQL Server 2000 Developer and I get an Error 1069 Server does not exist or Access Denied. Also it is saying there is a login error. Can anyone offer any help?
We are moving all databases from a SQL version 7 server to a version 2000server. Which of the following is the preferred method?1) Detach the DB on the version 7 server, move it to the new server viaWindows Explorer and reattach it there.2) Use SQL Enterprise Mananger with the DTS Export Wizard to "copy objects &data between SQL server databases" from the version 7 server to the 2000server.With the changing of the version, I thought maybe option 2 is best. Thoughts?--Mike CzizekIowa Network Services, Inc.Join Bytes!
I installed SQL Server 2000 Develloper version and I am wondering what are the limitation of this version compare to the other versions available? Like how many connections can I have open at the same time? Can I use it for my intranet application? etc... Thanks
I just installed 2005 and accepted all the defaults to upgrade the default instance of 2000 as prompted. However, when I open the SQL Server Mgnt Studio, my server shows 8.0.2039 as the version which is 2000, and I can't restore a backup from another 2005 server, because it gives an error message like it still thinks its 2000. The whole installation process went fine including sp1. I looked in Services to see if there was more than one instance of SQL Server, and there isn't. Also, all my database files are still in the old 2000 (mssqldata) directory. Any ideas, solutions? Thanks.
I have kind of an urgent need here. I need to know if there is a dll file or registry key or something of that nature that I can query on to find out if my SQL 2000 installations are Enterprise or Standard.
I understand I can do this using query analyser, but that will not work with my reporting tool (this is for reporting numbers of SQL installations in our very large enterprise for Microsoft license compliance).
Hello,I am having trouble installing Evaluation copy of SQL Server on mynotebook, which has XP, P4 processor,1G Ram, and 14 G harddisk space.After I run the Setup.exe, I get the files files extracted in theSQLEVAL directory.As per the instruction, I need to run Autorun.exe file. For somereason, when I try to run this file, a new windows pops up, which isblank black screen with cursor flying around in the window. The titleof the window isC:windowssystem32wowexec.exeThis is how far I have reached while trying to install the database. Iwould really appreciate if someone could provide some suggestions.VS
I know this is old database but when I download this evaluation from microsoft website, I got problem installing it. First, I unzip it. By default, it is unzip to C:SQLEVAL. Then, I went to install it. I don't which file I should click. So, I double click the autorun file. When I did that, there is a screen, I saw the screen saying "microsoft SQL Server 2000 Evaluation version". Then, I click "SQL Server 2000 Components"
Then, it comes to next page, and I click "Install Database Server". But after I did that, nothing happens! After I click again the same thing all over again, it says "Another instance of setup is already running".
I'm using Window XP Professional. Anyone encounter this problem before? I tried to re-download the file and reinstall but also the same problem. Really need help. Thanks.
I need to install 2187 hotfix to a sql server 2000 spanish version, but in the download section of the hotfix spanish is the only language that is not available, Anybody knows why?
I need to be able to obtain the storage space used for database log files through T-SQL commands. I can do this in version 6.5 but have been unable to accomplish this in version 7.0. Does anyone have a suggestion?
we always get all versions of the DTS File. Could you help us to Load or Save only the last version of the file? Is there any option of this procedure sp_OAMethod (or other) that solve the problem?
I'm trying to rebuild from a meltdown. I'm using disk backup files. Icould have sworn that I had SQL Server 2000 SP3 installed on the oldmachine, but maybe not.With SP3 installed, I get a message along the lines that the restorecan't be done because the backup was created using server version134218262 and this server is version 134218488.I've searched the documentation and can't find any reference to thoseversion numbers.In any case, I thought SQL Server 2000 could restore backups createdon any SP level to any SP level.Any ideas?--Regards.Richard.
Hello,We do not run SQL Server in our shop, but I'm starting to be tasked withanalyzing SQL Server databases from outside shops. I will need toopen .MDF files sent to me. Can I do this using SQL Server 2005Developer version? Or do we have to spring for the Workgroup version?Thanks, in advance, for your help.T
I have an application broadly deployed (about 10 computers). As of yesterday, two of these computers are unable to start the application, and failing with the error below. All other computers run the application just fine.
System.IO.FileNotFoundException: Could not load file or assembly 'ADODB, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. File name: 'ADODB, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
I checked and ADODB.dll version 7.0.3300.0 is in the GAC in the deployment target machines.
I find ADODB.dll in my C:Program FilesMicrosoft.NETPrimary Interop Assemblies folder (development computer), but this is version 7.10.3077.0 (file properties version)
I see ADODB.dll as a project reference, but this shows version 7.0.3300.0, and shows the path to the PIA folder. I have no clue why these are not showing the same version number. Local Copy is false.
Installing MDAC 2.8 on the failing deployment target machines did not help.
I am a freelance programmer and just picked up a client that has an instance of SQL Server. I just need to know if the Developer edition (I've seen it as low as $49) will function adequately for me to test the application I'm writing.
The test environment will be 2 PC's, 'A' running the server and 'B' the one I'm writing the software on. I need to configure comp 'A' to mirror the client's WAN and how various client's comps will access the database with the application I'm writing on comp 'B'. I don't need a full-blown liscense for the database, as I won't be keeping it after production is finished. I just need one I can connect to and configure for development testing without having to develope the software on-site.
We just upgraded our applications from VS 2005 to VS 2008 and discovered we had to convert our SQL Server CE databases. So I did that. I then included the sqlce...35.dlls in the application directory on my test computer as well as the System.Data.SqlServerCe.dll version 3.5.
When I run the app and it tries to load the System.Data.SqlServerCe.dll I get the following error: System.IO.FileLoadException: Could not load file or assembly 'System.Data.SqlServerCe, Version 3.5.0.0...or one of its dependencies. The located assembly's manifest definition does not match the assembly reference.
We have the application targeting the .NET Framework 2.0 and need to keep it that way for awhile.
i am working on upgrading the clients and server computers from 2000 MSDE to 2005 SQL Express Adv. Plan to upgrade using the template.ini.
i can find the version of sql server running on th server by @@version but how do i find the version of client connctivity components the computer has installed in order to ugrade?
1. somehow i need to know whether to upgrade a client computer CONNECTIVITY COMPONENTS from 2000 to 2005?
2. is there a way to enable tcp/ip in installation script of SQL Express?
ISSUE: ==================== In SQL 2005 (sp2) I get the following error when preforming a bulk insert with an associated xml format file: "Could not bulk insert. Unknown version of format file"
Question: ==================== I am unsure what they mean by "unknown version". Specifically the format file in question was created using bcp. Also the entire table scenario was created from a msdn example.
Any ideas? have you seen this before?
NOTE: i can reproduce this issue outside the example but will refer to msdn considering it is simple and easily reproducible.
Scenario ==================== I can reproduce this error with the BULK INSERT example discussed on msdn (example A) http://msdn2.microsoft.com/en-us/library/ms191234.aspx
TO REPRODUCE:
* In short the table structure is: Person (Age int, FirstName varchar(20), LastName varchar(30))
* Data File Template: Age<tab>Firstname<tab>Lastname<return>
* Here is some the actual sql statement that pulls this all together BULK INSERT mytestnames FROM 'C:datatestexampledata-c.Dat' WITH (FORMATFILE = 'C:datatestexamplefmt.Fmt');
ISSUE: ==================== In SQL 2005 (sp2) I get the following error when preforming a bulk insert with an associated xml format file: "Could not bulk insert. Unknown version of format file"
Question: ==================== I am unsure what they mean by "unknown version". Specifically the format file in question was created using bcp. Also the entire table scenario was created from a msdn example.
Any ideas? have you seen this before?
NOTE: i can reproduce this issue outside the example but will refer to msdn considering it is simple and easily reproducible.
Scenario ==================== I can reproduce this error with the BULK INSERT example discussed on msdn (example A) http://msdn2.microsoft.com/en-us/library/ms191234.aspx
TO REPRODUCE:
* In short the table structure is: Person (Age int, FirstName varchar(20), LastName varchar(30))
* Data File Template: Age<tab>Firstname<tab>Lastname<return>
* Here is some the actual sql statement that pulls this all together BULK INSERT mytestnames FROM 'C:datatestexampledata-c.Dat' WITH (FORMATFILE = 'C:datatestexamplefmt.Fmt');
Could not load file or assembly 'Microsoft.DataWarehouse, version 9.0.242.0, Culture=neutral,publicKeyToken=89845dcd8080cc91' - the system cannot find the file specified.
I get this message when I try to do a forcast from the Data Mining - Forecast menu.
Forecast from Table Tools, Analyse, Forecast works perfect.
Running Vista and using the DMAddins_SampleData workbook.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
