SQLVDI Error In Eventlogs, Caused By Ntbackup
Mar 23, 2007
I wanted to prevent ntbackup from locking my databases during the nightly backup, so I excluded the ...Data folder from the backup set. However, I think that ntbackup is backing up the databases during the volume shadow copy phase of the backup, even though their folder was excluded from the backup set (I verified this setting in the .bks file). Although the lock only lasts a few seconds, the error message is worrisome and I would prefer to skip the databases completely. How can I stop the volume shadow copy from doing this?
Below is the the sequence of events leading up to the error, most recent first:
Event Type: Error
Event Source: SQLVDI
Event Category: None
Event ID: 1
Date: 3/23/2007
Time: 3:01:49 AM
Description:
SQLVDI: Loc=CVDS::Cleanup. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller.
. Process=8684. Thread=7556. Client. Instance=. VD=.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (6)
Event ID: 18264
Date: 3/23/2007
Time: 3:01:48 AM
Description:
Database backed up. Database: master, creation date(time): 2007/03/12(15:08:23), pages dumped: 1, first LSN: 268:352:37, last LSN: 269:24:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{66DC3082-FB76-4312-AD74-4BDAD9FC7209}1'}). This is an informational message only. No user action is required.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 3198
Date: 3/23/2007
Time: 3:01:47 AM
Description:
I/O was resumed on database master. No user action is required.
Event Type: Information
Event Source: ESENT
Event Category: ShadowCopy
Event ID: 2003
Date: 3/23/2007
Time: 3:01:47 AM
Description:
lsass (956) Shadow copy 24 freeze stopped.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 3197
Date: 3/23/2007
Time: 3:01:45 AM
Description:
I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
Event Type: Information
Event Source: ESENT
Event Category: ShadowCopy
Event ID: 2001
Date: 3/23/2007
Time: 3:01:45 AM
Description:
lsass (956) Shadow copy 24 freeze started.
Event Type: Information
Event Source: NTBackup
Event Category: None
Event ID: 8018
Date: 3/23/2007
Time: 3:00:14 AM
Description:
Begin Operation
View 43 Replies
ADVERTISEMENT
Apr 26, 2006
Hi.
Is it possible to prevent SQL Express for logging in the EventLog?
It fills my Eventlog very fast with messages like:
Starting up database 'PosDB'. etc...
Other application crash becuase the eventlog got filled.
I know I can change eventlog settings but the problem is that our customer don't wonna do this and if the SQl Express stop logging all the time the log will get mush smaller :-)
So is there any settings I can do in the dabases or the SQL Express services to prevent all information logs?
Thanx. Best Johan
View 4 Replies
View Related
Apr 14, 2004
I am getting error
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
StackTrace> at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at Galileo.Modules.Data.DBDeclare.RunProcedure(String sp, IDataParameter[] parameters) at GalileoModules.Data.PrivateAccomodation.Search3.Query(String[] values
If I don't cache this page, would that help?
Any other suggestions?
View 3 Replies
View Related
Apr 22, 1999
Does anyone know of any SQL errors that will stop the SQLserve.exe service? I meant the error didn't hang the SQL server service, it stopped the service (from green light to red light).
Thanks in advice for any input or ideas.
Wing
View 1 Replies
View Related
Feb 25, 2006
Can somebody guive me alittle guidance in how to make this? I have like 4 lookups but some can throw errors, and I need to know what happened when I go to the office in the moorning.
Thanks
View 1 Replies
View Related
May 25, 2007
My program use the mutil-threads, each thread would use AppendChunk to insert a binary file into sqlserver. But program always stopped exceptionally , But I can not catch any exception. It looks like be killed by someone or system.
Can anyone hekp me?
Thanks a lot.
View 1 Replies
View Related
Jul 19, 2006
Hey guys
Just a question.
If I use NtBackup with Sql server 2005 & sql writer started, the NtBackup use the Volume shadow Copy Service and the Sql Server Writer ?
That is if do I do the backup of the log and data files, is these correctly and with consistence?
Very Tanks
View 5 Replies
View Related
Mar 20, 2006
I am trying to import a fixed width file where some of the numeric columns are empty. The columns in question are defined as integer columns (of varying sizes) and I am guessing that "empty" columns come across as multiple spaces on the import.
Even though I have "Retain null values from source" checked off, I am still receiving the following error on these empty columns:
Error: 0xC02020A1 at Input Data, Flat File Source [1]: Data conversion failed. The data conversion for column "ToContractExpiryYear" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Input Data, Flat File Source [1]: The "output column "ToContractExpiryYear" (51)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "ToContractExpiryYear" (51)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Input Data, Flat File Source [1]: An error occurred while processing file "\Nastinus-01ClearingDataOCC20060320ser2mst.20060317" on data row 1.
If it is truly the system treating the column as spaces (and not trimming the value), then the only solution I can think off is to source everything as strings, perform a transform that executes a Trim() (Derived Column or Script ??), THEN perform a transform that converts data types, then do whatever else I need...
Am I missing something? Is this the correct solution?
View 2 Replies
View Related
Jan 25, 2000
Wouldn't you know it I have to restore a database and my tape device is kaput.
The database I need to restore was backed up with TSQL commands. Does anyone know how or if I can use the ntbackup.exe to restore the file to disk ?
I have a similar tape device on another server (but no sql server on that server) and if I could just get the file down to disk I think I can restore from disk.
Any ideas?
View 2 Replies
View Related
Feb 4, 2015
is it possible that this error during backup caused Sort Warning???
I sent to support of our Storage and he make result that this caused jobs which have Sort Warning....
if I checked this error on internet, i found problem with Storage or it can be also lot of fullscan and etc.
So it can be also that Order By caused some reading directly from disk and not from memory ? maybe if there is using tempdb right ?
View 3 Replies
View Related
Jan 30, 2007
Hi.I have an ancient preCambrian app that uses the db library to interface withsql server databases.It is written in c++.When testing it I noticed on one machine with sql server 2005 installed itruns fine, but on another it has some problems, notably.. it gets as a resultof a select statement with an order by clause the error:only fully keyset ddriven cursors can have 'order by', 'group by', or 'having'phrases.Error code 10080Can someone suggest a 'configuration' parameter that might be causing theotherwise identical systems to have this problem on one machine and not theother?ThanksJeffthanksJeffJeff Kish
View 1 Replies
View Related
Jul 13, 2007
Hi,
Using SQL Reporting 2005:
I have a report which has the Interactive Height set to 0 so that it does not use paging. When I try and print preview the report, I can see the report okay until I go forward after the last page, and then I get the error "An error occured trying to render the report. 0x80004005". I can print the report and it prints fine, but I get a pop-up that says that there was an error printing the report. I've narrowed it down to the interactive size property, but am not sure how to get around it.
Thanks.
View 1 Replies
View Related
Feb 28, 2007
I've inherited a SQL 2005 Server with SP2 installed that throws this error whenever it's backed up via EMC Insignia's Retrospect 7.5:
Source: SQLVDI
Event ID: 1
SQLVDI: Loc=IdentifySQLServer. Desc=MSSQL$DATALIBRARY1. ErrorCode=(1060)The specified service does not exist as an installed service.
. Process=4788. Thread=4672. Client. Instance=DATALIBRARY1. VD=.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
---------------
As far as I can tell, the name should be DATALIBRARY, not DATALIBRARY1. Is there a way to change that reference without having to uninstall / reinstall?
Thanks,
- Al
View 5 Replies
View Related
Sep 23, 2005
At my job is a dts package that is failing in SQL 2005. I am not a SQLexpert. I am just trying to fix. I put the query in Query Analyzerand get this error:(4322 row(s) affected)Server: Msg 535, Level 16, State 1, Line 1Difference of two datetime columns caused overflow at runtime.I am just trying to understand what this means, what I should belooking for and what could be wrong. Here is the query:SELECT i.SerialNumber, '' AS mac_number, DATEDIFF([second], 'Jan 1,1970', s.DateOrdered) AS Support_StartDt, DATEDIFF([second], 'Jan 1,1970',s.Warranty_Enddate) AS Support_EndDt,DATEDIFF([second], 'Jan 1, 1970', c.Registration_Date) ASRegistration_Date, c.FirstName AS enduser_fname,c.LastName AS enduser_lname, c.CompanyName ASenduser_companyname, c.ContactEmail AS enduser_email, c.Address ASenduser_address1,c.Address2 AS enduser_address2, c.City ASenduser_city, c.State AS enduser_state, c.Zip AS enduser_zip,c.WorkPhone AS enduser_phone,c.Fax AS enduser_fax, d.DealerName ASdealer_companyname, d.ContactFirstName AS dealer_fname,d.ContactLastName AS dealer_name,d.Address1 AS dealer_address, d.City ASdealer_city, d.State AS dealer_state, d.Zip AS dealer_zip,d.ContactPhone AS dealer_phone,d.ContactFax AS dealer_fax,ISNULL(SUBSTRING(p.ProductName, 11, LEN(p.ProductName) - 10), 'unknownIWP product') AS product_type, '' AS extra1,'' AS extra2, '' AS extra3, '' AS extra4, '' ASextra5, '' AS extra6, '' AS extra7FROM tblInventory i full outer JOINtblDealers d ON i.DealerID = d.DealerID fullOUTER JOINtblSupport s ON i.InventoryID = s.InventoryIDfull outer JOINtblCustomers c ON s.InventoryID = c.InventoryIDLEFT OUTER JOINtblProducts p ON LEFT(i.SerialNumber,PATINDEX('%-%', i.SerialNumber)) = p.SerialPrefixWHERE i.SerialNumber <> ''Any ideas would be greatly appreciated.
View 2 Replies
View Related
Nov 14, 2007
Hi, I test the following sql statement, finding that an error ocurs:
Msg 7630, Level 15, State 2, Line 3
Syntax error near '"' in the full-text search condition '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfds'.
DECLARE @searchTerm NVARCHAR(40)
SET @searchTerm = '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf"';
SELECT [JobTitle], [JobDes], [OpenDate], j.[URLRef], c.[CompanyName], c.[URLRef], c.[URLSource]
FROM JobWanted AS j INNER JOIN
Company AS c ON c.CompanyID = j.CompanyID
WHERE CONTAINS((JobTitle, JobDes), @searchTerm)
It seems too lengthy string will cause an error for full-text engine. I find the sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf is truncated as shown in error message.
How to avoid this issue? Could I configre this limination?
Thanks in advance.
Ricky.
View 3 Replies
View Related
Apr 23, 2008
One of our server administrators was told by a software supplier that we needed the above .dll (the exact version specified) to get a shadowcopy program to work (??!!). Anyway, there is a SQL 2005 hotfix that you can request which says that it contains this dll (SQLServer2005-KB936305-x86-ENU). I unpacked it, but couldnt find the correct version in any of the cabs, so I set up a vanilla SQL 2005 install, service packed it and added this hot fix - guess what? the dll is there, but version 2000.85.2004.0.
I am at the end of my tether - can someone point me to a download location where I can get this file please?
Many thanks
View 3 Replies
View Related
Oct 19, 2007
Hello
When I call ExecuteResultSet(SqlServerCe.ResultSetOptions.Scrollable) I am getting the following error when the data type is Numeric(18, 4):
Expression evaluation caused an overflow. [ Name of function (if known) = ]
The numbers involved are not that big and work fine when ExecuteReader() or ExecuteResultSet(SqlServerCe.ResultSetOptions.None) are called on the same SQL.
Any ideas? Thanks in advance!
Cheers,
Dave
Code:
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim errorDescription As String = String.Empty
Dim numericNumber As String = String.Empty
Try
Using sqlCE As New System.Data.SqlServerCe.SqlCeConnection("Data Source = '" & My.Application.Info.DirectoryPath & "MyDatabase.sdf';")
sqlCE.Open()
Dim sqlCECommand As SqlServerCe.SqlCeCommand = sqlCE.CreateCommand()
sqlCECommand.CommandText = "SELECT SUM(MT.TPM_Measure1) AS CurrentAmount FROM BUS_Table MT"
System.Diagnostics.Debug.WriteLine(sqlCECommand.CommandText)
Dim reader As System.Data.IDataReader = Nothing
If RadioButton1.Checked Then
reader = sqlCECommand.ExecuteReader() 'Works fine
ElseIf RadioButton2.Checked Then
reader = sqlCECommand.ExecuteResultSet(SqlServerCe.ResultSetOptions.None) 'Works fine
Else
reader = sqlCECommand.ExecuteResultSet(SqlServerCe.ResultSetOptions.Scrollable) 'Causes the error!
End If
If reader.Read() Then
numericNumber = reader(0).ToString()
End If
reader.Close()
reader.Dispose()
End Using
Catch ex As Exception
errorDescription = ex.Message
Finally
Me.lblError.Text = errorDescription
Me.lblNumeric.Text = numericNumber
End Try
End Sub
TPM_Measure1 datatype is Numeric(18,4)
When the above query works the value is: 4053723.6300
View 18 Replies
View Related
May 3, 2008
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
View 1 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Apr 18, 2008
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 6 Replies
View Related
Jan 24, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Jan 3, 2007
Using ADO.Net and SQL 2005, we have an exception handler in one of our .VB classes. We extract all the information from the exception and dump the stack into an email, but we would also like to see the query that caused the exception.
Is there an easy way to get the offending query without putting a try-catch around the hundreds of queries?
Thanks.
View 1 Replies
View Related
Mar 23, 2000
I just installed SQL7.0 on a windows 98 machine. When I go to register a new database, I get the following message.
MMC caused a general protection fault
I have rebooted the machine, removed & reinstalled the application.
Help - what else
View 1 Replies
View Related
May 7, 2014
I had a database in suspect mode this morning.
Fixed it by:
-placing in emergency mode.
-set single_user mode
-dbcc checkdb(N'dbname', REPAIR_ALLOW_DAT_LOSS)
-Rebuild the log.
-bring online.
DBCC Checkdb returned a bunch of errors:
Extent (3:394032) in database ID 7 is allocated by more than one allocation object. The error has been repaired.
Msg 8913, Level 16, State 1, Line 2
Extent (3:394032) is allocated to 'GAM' and at least one other object.The error has been repaired.
--Lots of these
Repair: Deleted off-row data column with ID 562825134080, for object ID 1076927654, index ID 1, partition ID 72057594039566336, alloc unit ID 72057594044153856 (type LOB data) on page (3:393971), slot 28.
Repair: Deleted off-row data column with ID 562825199616, for object ID 1076927654, index ID 1, partition ID 72057594039566336, alloc unit ID 72057594044153856 (type LOB data) on page (3:393971), slot 29.
Repair: Deleted off-row data column with ID 562825265152, for object ID 1076927654, index ID 1, partition ID 72057594039566336, alloc unit ID 72057594044153856 (type LOB data) on page (3:393971), slot 30.
Lots of these:
Msg 8945, Level 16, State 1, Line 2
Table error: Object ID 1076927654, index ID 1 will be rebuilt.
The error has been repaired.
Msg 8977, Level 16, State 1, Line 2
Table error: Object ID 1076927654, index ID 1, partition ID 72057594039566336, alloc unit ID 72057594044088320 (type In-row data). Parent node for page (3:394009) was not encountered.
The error has been repaired.
[code]....
View 9 Replies
View Related
Feb 23, 1999
Hello:
We have, on a devlopment server, running a long_running transaction for
almost two days. It was still running. This morning I decided to look at
three of two backup devices under EM to see if any backups were made to
these devices during the last couple of days on a de,mand basis by anyone.
The first one had a backup and the second and third device did not.
Somehow, and for some unexplained reason, the following message was put
into the MSSQL error log (and pretty much the same message went into the NT
event viewer).
----------------------------------------------------------------------
99/02/23 10:05:45.81 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run02.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
99/02/23 10:05:48.48 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run02.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
99/02/23 10:05:49.17 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run03.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
---------------------------------------------------------------------
This error, I beleive, caused DR watson to kick off and we could only sopt
it and revive the long running transaction by rebooting the machine, of
course thus requiring us to restart the lon_running transaction.
It look like NT couldn't find the backup device and therefore activated the
drwatson executible or so it seems to me.
Has anyone experienced this error before? IS it caused by NT? Or that
perhaps a certain threshhold was reacched on NT and drwatson kicked in?Any
other ideas?
Any information that can be provided would be GREATLY appreciated. THanks.
David Spaisman
View 1 Replies
View Related
May 2, 2006
I just updated MDAC on one of my machines and I'm now having trouble accessing my SQL server. It's a local connection using SQLOLEDB in a VB dll. It was working fine before the update and now I get:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/cms25/CMS.asp, line 33
Most of the information I can find on this refers to TCP/IP connections but the SQL server is local. My connect function looks like this:
Public Sub ADOConnect()
With m_ADOConnection
.Provider = "SQLOLEDB"
.CursorLocation = adOpenStatic
.CommandTimeout = 20
.Mode = adModeReadWrite
.ConnectionString = "Data Source=" & m_strServer & ";Database=" & m_strName & ";" & m_strUsernamePassword
.open
End With
End Sub
On this server, m_strServer = "(local)". What am I missing? Thanks for any help in advance!
a.
View 3 Replies
View Related
Feb 28, 2007
Hi.I need to make a trigger which fires when after an UPDATE is done ontable A in database X. The trigger must perform a statement whichcopies some of the data from the update to table B in database Y onthe same server.My question is: Can I access the data which caused the trigger to fireor just get an indication of which entry in table A had been updated?Best RegardsJens Christian Andersen.
View 2 Replies
View Related
Jan 16, 2008
Hi,
Let's assume the client code call a stored procedure which reads: SELECT * FROM myTable WHERE ID < 100. Let's assume that for whatever reason, the query becomes very slow and takes 60 seconds to complete. This 60 secs, could be the time for the DB engine to fetch all the rows (happening before returning the resultset to client code), or during the transfer of the resultset to client code (slow network throughput).
Question1: could this prevent another user from doing SELECT on myTable? (could be onn different ID or even overlapping the ID between 1 and 100).
Question2: could this prevent another user from performing write (UPDATE/DELETE) on the rows with ID between 1 and 100?
Question3: can another user perform a write (INS, DEL, UPD) on rows outside of the ID between 1 and 100?
Thanks in advance for any help.
View 6 Replies
View Related
Feb 1, 2008
Hello
Am having a problem which started after I installed a databse with sqlexpress. I get this error when backing up "MSDEWriter" has reported an error 0x800423f4
I am running Windows 2003 SBS SP2.
I've checked to make sure that all of my databases are using simple in recovery mode.
Please help
Thanks
View 1 Replies
View Related
Apr 5, 2007
Hi all,
Report:
-For instance 2 small tables (eg. width 10cm = 3 inch?)
-And one wide table (eg. width 30cm = 10 inch?)
All separated by "insert pagebreak after table".
Problem:
When rendered, the pages with the small tables on have a lot of white blank space at the right of the table. This is probably caused by the big table on page 3.
This report is distributed by email in Excell format. So on sheet 1 and 2 there are a lot of white cells on the right of the tables. When trying to print, they just want to use the "landscape" option and the "fit to page" option. Because of the empty white cells, the fit to page option reduces the first 2 tables to a very small table which covers only 50 % of the page width. The other 50 % is reserved for the empty cells.
Off course, I know that deleting the empty cells offers a solutions, but it would be a lot more handier if there were no empty cells in the first place.
Anybody with a solution?
View 2 Replies
View Related
