I just noticed that SQLXML4 did not install when I installed SQLExpress Advanced package (Mar 2006).
Anyone know if I can install SQLXML4 separately for SQLExpress Advanced or do I need to uninstall and re-install the entire package?
Thanks,
Paul
After installing the March SQLExpress Advanced package, I noticed that SQLXML4 did not install.
Is there a way to install the proper version separately, or do I just need to reinstall the entire package?
Thanks,
Paul
I have a new Vista laptop. When I tried to install SQL Server 2005 Developer edition, I get the following error message "An installation package for the product SQLXML4 cannot be found. Try the installation again using a valid copy of the installation package 'sqlxml4.msi'".
I have tried uninstalling (including deleting directories and registry settings manually) with no success. What else is there?
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
Hi All,
I have created an installation application which will install the application with SQL Express and .NET Framework 2.0.
If i install this application in a Fresh system(i.e which is not having SQL Express), it is installing the application with new database instance successfully.
But if i try to install the same in a system which is already having SQL Express, throwing "Object reference exception" because it is not able to create the new database instance.
Can anybody help me out .
Regards,
Doppalapudi.
Hi There
I have just done my first clean install of SQL 2005. I have previously upgraded several boxes from SQL 2000 without incident.
The clean install seemed to go fine but the Maintenance Tasks didn't install? I have looked on the web but have been unable to unearth any information. Has anyone encountered this before and if so I how do I add Maintenance Tasks to the Management folder?
I am a novice at working w/SQL and am trying to learn on my own... I download SQLExpress and installed it. However, I received a warning message that Internet Information Systems was not installed or enabled. I checked cpanel and it was not there. Figured out that I needed to check the windows components and attempted to enable it. I was asked for my XP Pro discs (which I can't find of course) in order to load admxprox.dll. How can I get a copy of that file so I can move forward???
View 13 Replies View RelatedI have the latest SQLEXPR and the Management Studio.
Management installed no problem.
I cannot install SQLEXPR due to beta versions of Visual Studio, etc. However this machine has been rebuilt with disk format and clean install of Windows XP Pro. No beta's of any kind on the machine.
Have latest version of Net 2, installed without error.
I installed SQLExpress with out error on other machines.
Help!
Geoff
This morning I booted to a message "Unable to load SQLBOOT.DLL (hresult 0x8007007e). Uninstall and re-run setup." When I did the uninstall, I got a couple of error warnings re
sqlboot.dll.
When trying to re-install, the install hangs up at MSXML6 with the message "Unable to find
MSXM16.msi install package." I've looked at the files in the install directory and the .msi
package is there. I've tried it twice with the same results.
Any help would be appreciated.
Don Seydel
Hi.
I have XP with SP2. Install SQLExpress because I need test my system work in this plataform. The system used database in SQL Server. And try test uses SQLExpress.
The system work in my computer, I have not problem... but when the other client try to access to my computer...not the system. They cannot see me. I made ping to my computer this responsed, but in the other computer is not responed. The first instance had access, but when try access with the System the comunication lost. And now nobody can see my computer but i can see every one.
Check the access in secpol.msc in Local Policies | Access this computer form the network. And I have the group everyone, administrators.
Do you have any idea, what happed?
Thanks
I'm looking for gritty details on why Internet Explorer 6.0 SP1 is required for installing SQL Express. Any help or direction would be great thanks!
-Bathisar
I'm still doing some research but I thought I'd slap a quick post up here anyway. I'm trying to create a small 'setup and deployment' project in studio 2005 that includes a prerequisite (sqlexpress). The one thing I've noticed is that there is not an option to install this silently by providing the executable with the appropriate switches. I could easily write my own small utility to do the work or I could use a third-party component like NSIS, however, I'm quite simply amazed that this feature was left out of studio 2005. It's quite possible I'm missing something...any feedback is appreciated 100 times over!
Thanks
Corey
Can the template.ini be setup to upgrade a previous version of MSDE if it exists or just install it if it does not?
I currently have ADDLOCAL=SQL_Engine and UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER in the file but that does not seem to do it if the server does not exist.
Am I going to have to create two seperate ini files and tweak my install program to select the specific one or am I missing a simple step?
Thanks in Advance
Dave
hiya,
I have sqlExpress and sqlServerManagementStudio on my XP pro box.
Will the installation of sqlExpress (Advanced Services) cause any problems?IS thereanything that I shold be aware of in advance?
many thanks,
yogi
Because of numerous problems trying to get sqlexpress working, I uninstalled it with the intention of reinstalling (via Add or Remove Programs). However, now when I try to reinstall it, I get a message that the I am not making a changes so it won't let me install it.
I do have sql server 2005 developer's edition installed; is that the reason? and does that mean I cannot have both installed on the same machine?
So any help? I tried the stuff in the FAQ
View 3 Replies View RelatedFirst latest Identity column is 5 I try to insert value to table which have Identity column by ExecuteNonQuery() method. There was some error and rollback this transaction.and then I modified code for completely saving after that I try to insert value again by running program although this transaction completely But value in identity is 7 ( It seems value 6 didn't rollback when not completely saveing ) Please advise me How can I rollback Identity column value ?
View 1 Replies View RelatedI have a transaction log that is 80% full and will not dump. I have used the "dump transaction dbname with no_log" command. It return the usual "This command did not return data, and it did not return any rows". However, this didn't do anything. The transaction log is still full. I don't want to restart the server if I don't have to. Any ideas?
View 5 Replies View RelatedWe have Active/Passive cluster on Windows 2003. It is a 2 nodes cluster. The active server came down and the Cluster didn't failover. Then we had to manually failover. Can you help me to decipher the Cluster.log to find out why it didn't failover?
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] OnlineThread: QP is not online.
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13522 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsFlushBuffers 95c, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13523 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] WriteFile 928 (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsFlushBuffers 928, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13524 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsFlushBuffers 95c, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 7e0, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.00000844::2007/10/12-04:09:11.323 INFO [Qfs] GetDiskFreeSpaceEx Q:MSCS, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13525 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] WriteFile 7e0 (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsFlushBuffers 7e0, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 7e0, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status
You can use a Select top @variable in sql server 2005:Thus:--'Throttle' the result set:Select Top (@MaxBatchSize)KeyID, LId, ArrivalDt, CaptureDt, Lat, LongFrom GPSDataOrder By CaptureDt DescMakes messing with Set Rowcount *so* redundant :-)
View 1 Replies View Relatedhi ..
i made an application using vb6 that access the table in a sqlserver database and in the load event i write
cn.mode=adsharedenyread
and i make two copies of the application and run them both of them read the data and no deny happen !!! although both of the applications have adsharedenyread
how can i make privilage for some users to read or write ?
by the way is that can be done in ado.net 2.0 ?
thanks in advance.
--create a temp table like:
select * into #tmp from
(select 1 as ID
union all select 2
union all select 3
union all select 4
) as A
-then run this query:
select B.ID,isNull(B.GID,0) as GID from
(select #tmp.ID,A.GID
from
#tmp
left outer join
(select ID,1 as GID from #tmp where ID in (2,4)) A
on #tmp.ID = A.ID
) as B
--I thougth it should return:
10
21
30
41
--but it actually returned:
IDGID
11
21
31
41
--if I change GID value in '...(select ID,1 as GID from #tmp where ID in (2,4)...', for example 2, then it return:
IDGID
12
22
32
42
WHY?
Hi There
View 1 Replies View RelatedHi every body !
I try to insert the reportViewer in my asp page, all is good, but if I want to change (by choosing another report), and i cannot call the method RefreshReport() as I saw in the msdn documentation.
I didn't understand why, I download the ReportViewer from msdn download : the version is 2.0.50727.42 from 22/01/2006...
I implement in my asp designer tools the following dll : Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.dll 9.0.1399.1 from 14/10/2005
Did I forget any code line ? or did I download a bad version ?
Code Snipp
ReportViewer1.ServerReport.ReportPath += "CounterReport";
ReportViewer1.Refre.... //Visual studio didn't propose the method !!
I created a SSIS package that imports a file then moves the file to a folder called processed.
I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
I have 1 table:
ID pagename datevisited
1default01/01/2006
1info01/01/2006
1default02/01/2006
1info02/01/2006
1summary02/01/2006
2default02/01/2006
2info02/01/2006
2summary02/01/2006
I need to run query for ID who didn't visited a summary page(per day)
How do I do this?
Hello, everyone:
I have a backup plan that remove the old backup files more than two days. Last Monday, the SQL Server restart. Since that, the backup is fine, but it didn't remove the old backup files. Why and how to handle that? Thanks
ZYT
I have a very weird problem.
I ran a SQL statement to get the data from two tables using join. These two tables have a column in the same name €śID€?.
SQL=€?select * from table1 a, table2 b where a.ID=b.ID€?
Set RS=DB.Execute(SQL)
The statement worked. But when I output the records in my ASP pages, I got an error:
ADODB.Recordset error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal€?
This is the line caused error:
<%= RS(€śa.ID€?) %>
It seemed that SQL Server recordset doesn€™t carry the table aliens. If I removed a. from ID the error was gone but it gave me the value of b.ID.
How to solve the problem? Thank you.
hi ..
my problem is
i create a user in sqlserver from enterprise manager as follows:-
1- goto logins and new login
2-type a name and choose sqlserver authentication and type a password
3- from server roles tab i choose system administrators
4 from database access i choose the database i need that user to connect to .and OK
5-i goto database node in enterprise manager and select the database and the table
and double click on it and choose permissions and de-select the SELECT privilige
then i use ADO to connect to sqlserver through that user and when i select(SQL query) the table the data appeared normally !!!! and it suppose to give me exception
thanks in advance.
Dear all,
I have built an SSIS package by using the BI Dev Studio and enabled its configuration xml file.
The package have a variable called TranDate and I want to put it dynamically from a Calendar on my website (just like assigning a variable).
I have successfully change the value of that variable in the configuration files (affected to the xml file).
Then I loaded the package and executed it (through my web). It's still get the old value (which I have assigned while creating the package).
I didn't understand that where else can the package get the value of that variable so it still get the old value (that value have never appeared in the xml configuration file anymore when I changed it).
Thanks for reading this, and I am looking forward to seeing any helps from you guys.
Dear all,
I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value.
This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ?
Here is the capture of my package, since I didn't know how to attach the picture in this forum.
Thanks in advance.
Best regards,
Hery
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
View 1 Replies View RelatedI am doing search through Date Range but didn't get correct result.
For Example if i created a Task on 5/8/2014 and when i have take Date Range from 1/8/2014 to 6/8/2014 then didn't get 5/8/2014 data in result but when i taken range from 1/8/2014 to 5/8/2014 then got the 5th Date data.
I am taking Range Inclusive Operator(:).
SELECT ( STRTOMEMBER(@FromDate) : STRTOMEMBER(@ToDate) )