SRVPROC 0xXXXXXXXX (spid XX) Returned With Error

Oct 4, 2007


I recently had users complain about having connection problems to their SQL instance.
After reading up on how to troubleshoot this type of problem one of my steps included setting trace flag 4029 and 3689.
This did not yield the error I was expecting but rather some cryptic message.

SRVPROC 0xXXXXXXXX (spid XX) returned with error

What concerned me most was not the amount of times they happened but the times the different error codes were logged.
I had error 59 logged every few seconds while error 121 was logged every morning at 6.

Can anyone shed some light?

Cheers,
RoviWil

View 5 Replies


ADVERTISEMENT

OLE DB Error Trace [Non-interface Error: CoCreate Of DSO For MSDAORA.1 Returned 0x80040154].

Oct 16, 2007

I am attempting to link a table to an .ADP using an ODBC link. When I run through the link table wizard, I hit 'finish' and this is the error I get.

[edited to add]: I am running MS Access 2003.

Can anyone help with this or tell me what this error message's translation is? Thanx.

Sean

View 1 Replies View Related

Test Connection Failed Because Of Error Initializing Provider. The HTTP Server Returned The Following Error : Not Found

May 26, 2008



Hi All,

I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.

Can you anyone please provide solution for this?

Thanks in advance,
Anand Rajagopal

View 1 Replies View Related

403 Error: The Remote Server Returned An Error: (403) Forbidden.

Jul 16, 2007

When I try to view the report, I got the error "The remote server returned an error: (403) Forbidden. ". And in the event log , I got the detaiil excception:


Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Date: 2007-7-16
Time: 11:28:29
User: N/A
Computer: WEIGUANG
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 2007-7-16 11:28:29
Event time (UTC): 2007-7-16 3:28:29
Event ID: 3c4daa414c89430786c106f3c9085b56
Event sequence: 10
Event occurrence: 1
Event detail code: 0

Application information:
Application domain: /LM/W3SVC/1/Root/Reports-2-128290300818412520
Trust level: RosettaMgr
Application Virtual Path: /Reports
Application Path: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportManager
Machine name: WEIGUANG

Process information:
Process ID: 4152
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE

Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (403) Forbidden.

Request information:
Request URL: http://localhost/Reports/Reserved.ReportViewerWebControl.axd?OpType=StyleSheet&Version=2005.090.3042.00
Request path: /Reports/Reserved.ReportViewerWebControl.axd
User host address: 127.0.0.1
User: ASIAPACIFICliweig
Is authenticated: True
Authentication Type: NTLM
Thread account name: NT AUTHORITYNETWORK SERVICE

Thread information:
Thread ID: 5
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: True
Stack trace: at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)


Custom event details: For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.



I'm using reporting service 2005, does anybody know the reason?



Many thanks.



Kevin

View 33 Replies View Related

The Push Method Returned One Or More Error Rows. See The Specified Error Table. [ Error Table Name = ]

Jan 10, 2008

Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.

I am performing below operations for that.
Step : 1 Pull To Mobile



Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);





Step : 2 Using one device form i am updating table "ItemMaster" table's values.

Step : 3 Push From Mobile



Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);




So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.

Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.

Can any one help me?I am trying for that since last 3 days.

View 7 Replies View Related

SQL Error : 'Subquery Returned More Than 1 Value'

Sep 9, 2004

Hi i am a newbie in sql so any help would be appreciated. i have a serverlog table that initially had one server and different functions types, my sql query got a percentage of the execution times for the different functions and all worked well, however as soon as i put more servers in to the table i got the following error...

"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."

Here is my SQL, the problem is with the sub queries returning more than one server type... Hope somebody can help and thanks in advance..


SELECT server, [function], prelimquery * 100 AS [%OverallProcessingTime]
FROM (SELECT server, [function], subquerya /
(SELECT subqueryb
FROM (SELECT totalallreqexec *
(SELECT AVG([exec_time])
FROM llserverlogs) AS subqueryb
FROM (SELECT COUNT(*) AS totalallreqexec
FROM llserverlogs) DERIVEDTBL) DERIVEDTBL) AS prelimquery
FROM (SELECT server, [function], NoRequestExecutions *
(SELECT avgexectime
FROM (SELECT DISTINCT server, AVG(exec_time) AS avgexectime
FROM llserverlogs
GROUP BY server) DERIVEDTBL) AS subquerya
FROM (SELECT DISTINCT server, [function], COUNT(*) AS NoRequestExecutions
FROM llserverlogs
GROUP BY server, [function]) DERIVEDTBL) DERIVEDTBL) DERIVEDTBL

View 2 Replies View Related

Subquery Returned More Than 1 Value Error

Jun 5, 2006

Hi group
I get the above error in my SP when the tblHolidayDates has more than one record. Here is my SP:
begin

if datediff(day,getdate()-10 ,(Select HolidayDate from tblHolidayDates))= 3 AND
DATEPART(dw,(select holidaydate from tblHolidayDates)) = 1 -- Monday Date
SELECT su.SuspensionID, su.ConsentNo, si.SiteID,
si.NameNo + ' ' + si.Address1 AS SiteAddress, si.SiteDesc,
si.SuspensionStart, si.SuspensionEnd, si.Address1, si.BaysAttached,
rd.RefValue AS NoticeDays, si.MergeID
FROM Suspension su
INNER JOIN SiteData si ON su.SuspensionID = si.SuspensionID
INNER JOIN RefData rd ON si.NotReq = rd.RefCode
WHERE su.Status = 'ACT'
and si.Archived = 'N'
and (datediff(day, getdate()-10 , si.SuspensionStart) = rd.RefValue
OR (datediff(day, (Select holidaydate from tblHolidayDates), si.SuspensionStart)= rd.RefValue + 2)
or datediff(day,(Select holidaydate from tblHolidayDates), si.SuspensionStart)=rd.RefValue + 1)
end

Any pointers much appreciated.

View 11 Replies View Related

Returned Status Value 2 Error

Jan 14, 2006

Could someone please explain why I get the following errors ?

I have them in 15 out of 20 packages and its always the same, I have tried, removing the columns from the data source but it just seems to jump then to another column.

I have also tried redirecting the errors to a differnet error database but ALL the rows just seem to be errors then

In event viewer I get no further information simply

Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12291
Date:  14/01/2006
Time:  14:57:56
User:  
Computer: 
Description:
Package "Policy_PC" failed.

[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".

[Flat File Source [1]] Error: The "output column "Column 42" (176)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 42" (176)" specifies failure on error. An error occurred on the specified object of the specified component.

[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Any input at all is welcome, Im still a newbie at this

View 4 Replies View Related

Error: 'SubQuery Returned More Than 1 Value'

Jun 26, 2007

I have some code that calls a stored procedure on SQL Server 2005 using the Microsoft JDBC driver 1.1. The code normally works however, every once in a while an exception is thrown:




Code Snippet

com.microsoft.sqlserver.jdbc.SQLServerException: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !, <,<=, >, >=, or when the subquery is used as an expression.

Generally, this has been resolved by restarting SQL Server 2005, but why is it showing up to being with?

Stored Procedure:




Code Snippet

ALTER Procedure [dbo].[addRecord]
@userID int,
@itemID int,
@info varchar(50),
@comment varchar(50),
@output int output
AS


Declare @dateSubmitted datetime
set @dateSubmitted = getDate();

--Insert the new record. THIS TABLE has an ID identity Primary Key
--column that auto-increments.
insert into RecordTable
(UserPerson, Information, DateSubmitted)
values (@userID, @info, @dateSubmitted);

---Get the ID Assigned in the record table. The Item table
---has a Foreign key on this column.
Declare @assignedID int
set @assignedID = (select ID from RecordTable where DateSubmitted = @dateSubmitted)

/**Set the output parameter.*/
set @output = @assignedID;

--Now update the Item Table.
insert into Item
(ID, RecordID, Comment)
values (@item,@assignedID, @comment);

View 8 Replies View Related

Data Returned From .WriteXML Is Different Than What Is Returned In Query Analyzer.

Jun 20, 2006

I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3.   string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE  a.RegionCode = b.RegionCode"; 5.   DataSet dsMarketList = new DataSet();6.   SqlConnection sqlConn = new SqlConnection(intranetConnStr);   7.   SqlCommand cmd = new SqlCommand(sql,sqlConn);8.  sqlConn.Open();9.   SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10.   try11.   {12.   adapter.Fill(dsMarketList);
 13.  String bling = adapter.SelectCommand.CommandText;//BRG 14.   dsMarketList.DataSetName="RegionMarket"; 15.  dsMarketList.Tables[0].TableName = "MarketList"; 16.    dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to  17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18.           // from the SQL query 19.  } 20.  catch(Exception e) 21. {  22. // Handle the exception (Code not shown)

View 2 Replies View Related

Subquery Returned More Than 1 Value. Error On Update SQL

Sep 27, 2004

Hi guys,

I am just trying to do a simple update statement and am getting this error

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.

My statment is like this:

Code:


update [Clients]
SET [OPT-OUT] = 0 WHERE [OPT-OUT] is null


I have used this against another table with success, but get the error against that one. Anyone have any idea?

View 4 Replies View Related

Error: Cursor Not Returned From Query

May 26, 2006

I'm a really beginner about sql2000.During my test I have created the following query. It's works ok until Ido't add the code included in section A, when I add it the i obtain theerror: Cursor not returned from queryAnyone can help me?Thanks Carlo M.set nocount onIF OBJECT_ID('storico_big') IS NULL --- section A begincreate table storico_big( data datetime,bcarrier varchar(20),bda CHAR(30),bzone char(50),bdur int) ;insert into storico_big --- section Aendselect top 10000adetdate,bcarrier,bda,bzone,bdurfrom pp_cdr (nolock)whereadetdate < :data_fin and adetdate > :data_in order by adetdateset nocount off------ end of query

View 3 Replies View Related

Previews OK, But Then Error: Rowset Not Returned

Apr 24, 2006

I am using a proc that runs fine in SSMS Query editor and also produces rows when I click the Preview button in the OLEDB Source Adapter. It has two input parameters. The proc contains some CTE's and UNION ALL's. It does not contain any dynamic sql. However, when I run the package I get this error:

[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

How can that be when the Preview shows rows being returned?

View 3 Replies View Related

SqlBulkCopy And Triggers Cause Subquery Returned More Than 1 Value Error

Feb 22, 2008

Hi,
I am using .NET sqlBulkCopy to insert several rows at once into my sql table.  Yesterday I created a simple trigger on this table to take the primary key of the inserted row and place into another table.  Fairly straightforward I thought, but I keep getting this error when inserting 2 or more rows (works fine with one row):
"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <= , >, >= or when the subquery is used as an expression. The statement has been terminated."
To test this, I changed the sqlBulkCopy into individual INSERT statements in a for each loop and then it works perfectly, so I know that it's definitely the sqlBulkCopy causing the problem, not the trigger itself.  Here is my trigger code anyway:
alter trigger tg_InsertClaim on AuditItemfor insertas
declare @AuditItemID as intset @AuditItemID = (select i.AuditItemID from inserted i inner join dbo.AuditItem a ON i.AuditItemID = a.AuditItemID)
insert into Claim (AuditItemID) VALUES (@AuditItemID)
Thanks!

View 2 Replies View Related

Displaying Error Message - No Rows Returned

Dec 4, 2006

Hello,

I have a seach on UserID enetred in a textbox by user.

When the user types a userID which has no data in the database can I display an error msg instead of the chart and table that is displayed on entering a valid userID.



Thanks,

Kiran.

View 3 Replies View Related

The Remote Server Returned An Error: (403) Forbidden

Apr 30, 2008

I wish http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1865928&SiteID=1 had the resolution to my issue but it doesn't.

Long story short, I thought I'd build a local web service with the same signature as something another team was doing. In Visual Studio, you can click on the project and select Publish.

One of the options is to "Delete all existing files prior to publish." I was unfamilar with this option and it does exactly what it claims to do: my inetpubwwwroot folder is clean as a whistle. I was expecting it to only delete what it had put out there but apparently not.

We have a deploy process here so the web work and the reports I've developed can and have been dropped back out there, no harm done. I recreated the virtuals for Reports and ReportServer and something is amiss. I can navigate to http://localhost/Reports/ and it's fine, it displays the folders I had created. I can click into the folders and see the reports I had deployed just fine. However, when I actually click on a report, it starts to serve the content but then chokes and dies on rendering. It then indicates "The remote server returned an error: (403) Forbidden."

I have gone through a fellow developer's machine and compared the IIS settings between the two machines and they appear to be the same.

Auth is set to Integrated Windows
I have restarted iis (iisreset) as well as followed up with a bounce to the "SQL Server Reporting Services (MSSQLSERVER)" service
It's all using the 2.0.507270.0 engine


Event log has this

Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 4/30/2008 4:10:43 PM
Event time (UTC): 4/30/2008 9:10:43 PM
Event ID: a375e274ef444acb997111f67f5fb9b4
Event sequence: 24
Event occurrence: 1
Event detail code: 0

Application information:
Application domain: /LM/W3SVC/1/Root/Reports-1-128540632573857817
Trust level: RosettaMgr
Application Virtual Path: /Reports
Application Path: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManager
Machine name: 1-227630691

Process information:
Process ID: 4884
Process name: aspnet_wp.exe
Account name: 1-227630691ASPNET

Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (403) Forbidden.

Request information:
Request URL: http://localhost/Reports/Reserved.ReportViewerWebControl.axd?OpType=StyleSheet&Version=2005.090.3042.00
Request path: /Reports/Reserved.ReportViewerWebControl.axd
User host address: 127.0.0.1
User: SomeDomainSomeUser
Is authenticated: True
Authentication Type: Negotiate
Thread account name: 1-227630691ASPNET

Thread information:
Thread ID: 1
Thread account name: 1-227630691ASPNET
Is impersonating: True
Stack trace: at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)


Any help would be appreciated immensely.

View 3 Replies View Related

Form Authentication: The Remote Server Returned An Error: (500) Internal Server Error.

Mar 11, 2008

I got Form Authentication to work, but I am getting this error sometimes. To reproduce this error consistantly is to run iisreset.exe to have a fresh start. Go to my report server login and open any report.

The page will display: The remote server returned an error: (500) Internal Server Error.

If i click "F5" to refresh the page the report will show up or if you go to another report it will work also. It is just the first time after iisreset.exe. It is very strange.

Here is my log file:

aspnet_wp!library!6!03/11/2008-15:20:36:: i INFO: Exception dumped to: c:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!6!03/11/2008-15:20:47:: Call to GetPermissionsAction(/).
aspnet_wp!library!1!03/11/2008-15:20:47:: Call to GetPropertiesAction(/, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:48:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:48:: Call to ListChildrenAction(/, False).
aspnet_wp!library!6!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:20:53:: Call to GetPermissionsAction(/Sentrack).
aspnet_wp!library!1!03/11/2008-15:20:53:: Call to GetPropertiesAction(/Sentrack, PathBased).
aspnet_wp!library!a!03/11/2008-15:20:54:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:54:: Call to ListChildrenAction(/Sentrack, False).
aspnet_wp!library!a!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!6!03/11/2008-15:20:58:: Call to GetPermissionsAction(/Sentrack/Shared Reports).
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to GetPropertiesAction(/Sentrack/Shared Reports, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:59:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to ListChildrenAction(/Sentrack/Shared Reports, False).
aspnet_wp!library!6!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:04:: Call to GetPermissionsAction(/Sentrack/Shared Reports/Report).
aspnet_wp!library!1!03/11/2008-15:21:04:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:05:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:05:: Call to GetSystemPermissionsAction().
aspnet_wp!library!a!03/11/2008-15:21:06:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:06:: Call to ListEventsAction().
aspnet_wp!library!1!03/11/2008-15:21:07:: Unhandled exception was caught: System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
aspnet_wp!library!1!03/11/2008-15:21:07:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
--- End of inner exception stack trace ---

Any ideas?

View 3 Replies View Related

DTS Error ? No Query Specification Returned By Transform Status

Mar 3, 2004

I'm getting this error in a simple DTS package.

No query specification returned by transform status.

Any ideas what's causing this ?

DTS is simply running a query (which returns data via preview)
and insert results into a table.

Thanks
Mark

View 1 Replies View Related

SQL Server 2008 :: Receiving Subquery Returned More Than 1 Value Error?

Aug 27, 2015

I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.

I first created up a User-Defined Table Type

My stored proc is as follows:

ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl]
@MtlTblMaterialType READONLY
AS
BEGIN
Set NOCOUNT ON;

[code]....

View 9 Replies View Related

Error: A Rowset Based On The SQL Command Was Not Returned By The OLE DB Provider.

May 14, 2007

I have a dataflow task. On which I have OLEDB as my source. I connect to my database and execute a stored proc. the stored proc results in a result set with only one row and two columns. First Column is an integer and the second row is a varchar(max) with xml script in it. Not that it should matter because it is in varchar(max).

Anyway, it give me an error

[OLE DB Source [321]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.



What am I doing wrong?

Can I not have a stroed proc that returns a result set as my data source?

View 4 Replies View Related

Excel Source (351) Returned Error Code 0x80040E21

Oct 19, 2007

[DTS.Pipeline] Error: The PrimeOutput method on component "Excel Source" (351) returned error code 0x80040E21.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Here is my request: Print out the row number and the contents of the offending field when an error like this occurs.

Wish list item:Have One Switch that tells SSIS to keep going and skip bad row.
Now I have to tell it twice for every field and it still stops!

Enough already. Why let one bad record stop 65,000?

IanO

View 8 Replies View Related

Error Message Returned When Executing Package Via C# App On Citrix

Oct 2, 2006

Hi,

I'm at a loss as to why i am getting the following error:

Retrieving the COM class factory for component CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}failed due to the following error: 80040154

I am calling the package from a C# application which i have installed within a citrix environment. The application works without any trouble on my development machine but as soon as i run the code that executes the SSIS pacakge i get the error. Can anyone enlighten me as to what is causing this?

Many thanks in advance,

Grant

View 4 Replies View Related

The Data Extension Returned An Error During Reading The Field.

Mar 6, 2006

Can anyone tell me what the heck this is trying to tell me. I have 3 datasets I'm working with so there are errors for each here:

[rsMissingFieldInDataSet] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. The data extension returned an error during reading the field.

Preview complete -- 0 errors, 4 warnings

View 7 Replies View Related

Setup Initial Configuration Compiler Returned Error 0x80040154

Sep 25, 2007



Hi there,
I am having a problem following the installation of SQL Server 2005. When i try to run the SQL Server Configuration Manager, i get the following error message:

"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SWL Server Configuration Manager. Class not registered [0x80040154]"

I looked at the thread "Unable to Uninstall SQL server 2005 Express" in which the same error number was mentioned and followed the advice, but still i get the same results. I have also tried
mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" in command prompt, but no luck. Im running windows xp professional SP2.

Ive spent 4 hours on this issue, and even tried uninstalling and installing again, but i am having no luck. Any help is deeply appreciated.

Thanks in advance.

Viran

View 6 Replies View Related

Error From System.Data.SqlServerCe.SqlCeCommand.ProcessResults() - ** No Exception Message Returned **

May 7, 2008

I have an app running Windows CE 5.0 and SqlServerCE 3.0. Occasionally, one of the production units will throw an exception with the following stack trace but no exception message:

Exception Msg:

Stack Trace: at System.Data.SqlServerCe.SqlCeCommand.ProcessResults()
at System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at XX.MobileApp.frmXXX.LoadData()


This is not something that I have been able to reproduce in our shop. I even take their database and run it here in our shop with out such errors. Does anyone know some possible causes for this error?


Sorry, I don't have more info to give becuase this is all I have to work with since I cannot reproduce in our shop. If the exception object exposes a property for the HResult, I would be able to provide that.

I appreciate your repsonses.

View 1 Replies View Related

Transport Level Error Returned When Trying To Shrink A Data File Using DBCCSHRINKFILE ('DB', Size)

Nov 30, 2007

Greetings:

I have a database that is 1.7terabyte in size with 136gb free and throws a "transport level error" telling me to discard the results when I run dbccshrinkfile ('DBNAME', size). I have tried various increments of size, from truncateonly to 1MB below its current value, and nothing works. I have tried to detach and reattach the db, restart the service, restart the server, and none have provided a solution. Any ideas?

Regards,
Derek

View 1 Replies View Related

Linked Server Issue: OLE DB Error Trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface Returned 0x80004005

Aug 13, 2007

Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)

A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -

Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].

In case if anyone has a solution to it, please let me know.

View 3 Replies View Related

Spid

Dec 14, 2000

Could someome please tell me what is going on with the following stored procedure:

EXECUTE msdb.dbo.sp_sqlagent_get_perf_counters

View 1 Replies View Related

Spid

Dec 13, 2005

HI!
if i have SPID. then can i get the storedprocedure name ?

Regards,
Shabber Abbas Rizvi.

View 1 Replies View Related

See The SQL For A Spid

Mar 28, 2006

All,

Is there any way to see the SQL for any given spid in SQL server?

I can see "properties" under enterprise mgr - which shows you a snippet of the SQL - or "sp_execute" depending on what you use to get to the DBMS.

Is there a way to take a deeper look?

Thanks,

Isaac

View 2 Replies View Related

Value Of @@SPID

Apr 15, 2004

Hi,

Can I have more than one value for variable @@SPID during a connection?

PS: sorry my english.

Thanks.

View 3 Replies View Related

Spid

May 18, 2004

Hi All,
Sql Server 7.

I have a table cust_detail when ever there is an insert/update/delete in this table it is getting blocked and in turn its blocking other table inv_credit which is doing select statement.

Please suggest me what might be the reason.

Waiting for Reply
TIA
Adil

View 1 Replies View Related

Spid

Jun 19, 2008

Hi to all.

I have a small doubt.
In my server some processs are running slow.
With out the use of profiler hw we can find the spid's that are running slow. is there any procedure for that.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved