SS2000 Error: No Mapping Between Account Names And Security IDs Was Done
Oct 25, 2007
Hello all;
I am trying to form a replication system but at the very beginning i couldn't pass an obstacle.
While trying to create the Replication it says i have to change the user which starts the SQL Agent because the current starter user account is a system account and this will make the replication between servers fail.
"SQL Server Agent on OZN currently uses the system account, which causes the replication between the servers fail. In the following dialog box, specify another account for the service startup account."
I change it in the properties dialog box of the SQL Server Agent. The new account is the one I formed and granted accordingly. But it gives the following error when I try to apply the changes.
" Error 22042: xp_SetSQLSecurity() returned error -2147023564, 'No mapping between account names and security IDs was done' "
I tried many things, searched in the net, changed the owner of the database, applied new accounts, many grants, applied service pack 4, etc...
If anyone helps it will be very much appreciated. Thanks in advance...
I received the following when trying to deploy an 2005 analysis services package over an existing database:
The following system error occurred: No mapping between account names and security IDs was done.
We have redeployed this solution several times over the last week and have never encountered this error. The changes that we are deploying are related to partitioning of the measure group fact tables - and are not related to security in any way. Can someone assist?
Our software vendor rep is trying to upgrade MS SQL server 2008 SP4 to 2012 SP1. Get an error message: no mapping between account names and security ADs was done. He says that we get this error message because we have two domain controllers in our network, and one is running on the same windows server that run sql server. Out IT support disagrees to delete the second domain controller, saying it is recommended by Microsoft and he suggests that the problem is in Active directory.
Hi,I created a user account on my active directory service. I then triedto assign a service located on my SQL server to be executed by thisaccount. However, when I try to configure my SQL server service, Iget the following error message:WMI Provider Error"No mapping between account name and security ID was done"Do you know what I am doing wrong?thanks
If you use a component that has a column mapping tab (most do) then you know that the component will try and map input and output columns automatically by name.
Is there a way to disable this feature when writing your own custom components? There is already a manual way to do this: rightmouse in the mappings tab of a component and chosen "Map Items By Matching Names". I find it is less helpful to auto-map initially because the designer tends to not think about the mappings.
A way of turning of auto-mapping in existing components would be cool too!
I am using Windows server 2012 Standard R2 and SQL Server 2014 Enterprise. I have created three AD Groups and added the groups to the SQL server:
Group A. Group B, and Group C. I have mapped each group to their database which I created on the same SQL server.
Now I have Group A mapped to Database A, Group B mapped to Database B, and Group C mapped to Database C.
Now all the users in all the groups can see each other databases, I need to give full permission to Group A for ONLY database A and NOT to allow them access Database B and C, also I need to do the same thing for the other two groups, this means each group can only access their database and not allowed to access other databases.
By default does CLR code run under the SQL Service Server account or the SQL Agent Service Account? Does anybody have a link to BOL or MSDN???
My assumption is its under SQL Server Service Account.
I'm trying to satisfy the DBA's security concerns in regards to CLR Code. If the account it runs under (Agent or service) has zero privliges will a dba still be able to maintain the server? Wouldnt all their backups work under a privilaged account that isnt the SQL Server Service Account?
I have a question, but first I need to give you some background:
My network works with Active Directory on Windows 2000, and I have web servers running on windows 2003 and SQL Servers 2000 running on Windows 2003.
I wanted to enable account delegation and I found a bunch of information.
Everything seemed "easy", but I tried to test it first on my test servers anyways and this is what happened:
We created the SPN for the SQL Server Account is trusted for delegation check box was selected for the service account of SQL Server. Account is sensitive and cannot be delegated check box was not selected for the user requesting delegation. But when we checked the box Computer is trusted for delegation (and only this box !!) in the server running an instance of SQL Server 2000, the role of this server changed magically (just like this guys, it was magic) from "server" to "Domain Controller".
We were intrigued about this change, but we "trusted" the white paper that we had in front of us.
http://support.microsoft.com/kb/319723
After some hours, the production web servers (of the whole network) and many workstations stopped working:
The IIS on this web servers will show an empty list of websites The network and dial-up connections were missing on the web servers and also on the workstations. The web servers and the workstations affected were "isolated" from the network, the command ping was not finding any of this computers.
Anyway, it was a nightmare, it took a while to fix the mess, we reverted the changes in Active Directory, and this makes me thing that the magical "promotion" of the SQL server to Domain Controller had to do with all this.
the questions is:
Do you have an idea about what could have caused all this? I mean, I still need to enable this account delegation thing. But I would like to know first if someone has done it before in a similar environment or if someone has run into one of the problems described before.
I am testing restoring databases on another SQL 2005 server in out environment using HP data protector 5.5 and its great. However, I notice that the security login accounts do not get restored. If this is the case how do I go about getting accounts restored? Also, are there any other options?
Our system is MS SQL Server v7 and NT 4. We have a stored procedure that exec's xp_cmdshell to run an external program located on the server. When a user who has 'sa' rights runs this stored procedure it works fine. When a 'non-sa' user (via the "BuiltinUsers" NT account) runs it, xp_cmdshell produces the following error:
Msg 50001, Level 1, State 50001 xpsql.c: Error 1385 from LogonUser on line 476
Is there an NT security or SQL Server setting I've overlooked that can be changed to allow non-sa users to xp_cmdshell programs?
n.b. The BuiltinUsers account does already have execute permission on the xp_cmdshell procedure.
I am trying to grant users permissions to our database, but when I add the users through a local group, I receive a mapped name of DOMAIN_USERNAME.
We are using standard security, with the SSQL server in a resource domain. I have created a local group with the global group inside it from the accounts domain. This seems usual MS practice to me.
We do not want these long cumbersome login names, but I am slowly worrying that there may perhaps be no way around it. Can't they just login with their normal username?
I have a small problem in parameter mapping for Execute SQL Task. I am using a delete statement with 2 conditions. Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider. I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR. i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype. This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also, I set the property RetainSameConnection = TRUE for oracle connection manager. I am not able to trace this logical error.
The same is working fine in my local machine. But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping? What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and inside the parameter mapping.
During install of SQL Server 2005, we can of course use a domain account or the built-in system account for running the services. I lean toward domain for obvious reaons but would like to know a +/- to each option and why I'd choose one over the other and what consequences or limitations one may encounter if I choose one over the other.
I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename. After the server wouldn't start I checked my script and noticed my error. I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd.
Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time). I also tried using the dedicated Admin connection but I got the same error. Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all). Is there an easy way to fix this mess without having to reinstall from the setup application?
I have a dts package scheduled to run hourly as job since recent November. (Win2000 server, MSSQL2000 standard) Its been running fine, except last few days, SQL Agent shows it attempted to run it but fails Checking the history for the job i got this error message each time: ================================================== ====== DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_2 DTSRun OnError: DTSStep_DTSDataPumpTask_2, Error = -2147467259 (80004005) Error string: Error creating datafile mapping: The volume for a file has been externally altered so that the opened file is no longer valid. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 Error Detail Records: Error: 1006 (3EE); Provider Error: 1006 (3EE) Error string: Error creating datafile mapping: The volume for a file has been externally altered so that the opened file is no longer valid. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_2 DTSRun: Package execution complete. Process Exit Code 1. The step failed. =================================================
The key information i think would be these few lines: Error creating datafile mapping: The volume for a file has been externally altered so that the opened file is no longer valid.
I don't think its SQL Agent as its scheduling is running other jobs fine(backup) The DTS package runs fine manually. Such i suspect dtsrun.exe itself. But where do i go from here?
If we have a "pool" SQL login, a one that uses SQL Server authentication, and this login is used by different domain account to access SQL Server, is there a way to audit which domain account used that "pool" login to do something on a object in SQL Server? I have to keep this way of accessing SQL Server, so how to create a login for every domain account accesses SQL Server
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
I have created a package which transfers data from a SQL server source to an Excel Destination. The DataFlow Task works fine , if i pre-define the column names in the Excel Destination... But i run into an error when i give the blank excel sheet as my destination. I am unable to map any columns
A sample example is as shown above .. In the column mappings field only one column in the Excel shows up for mapping and eventually throws the error "[Excel Destination [42]] Error: The number of columns is incorrect. "
How do we proceed in this case , where in we do not want to give pre-defined coulmn names in the Excel Destination sheet.
I have a server that has 20 databases . I have tested with few users with different level of access and all of them were able to connect to the server and also see, select, update , delete from a particular database which is kind of weird because they do not have a user login associated or mapped to that database. I checked and no user is part of any group in AD that would give them permission to connect . I need a query that would find the permission path of a user. I already queried with xp_logininfo but I am not getting any thing.
I have a simple query which returns all the names of products attached to a particular order. select a.orderid, b.product_name from orders a, order_items b where a.orderid = b.orderidSay it returns this data: (sorry about the formatting!)
What I want to do is, instead of getting 3 rows back, I want to roll up all matching values (of product_name) from the order_items table into a simple string seperated by a comma. So, for the data above I would get a single row with the orderid and a string containing something like this: "Sweater (Black), Trousers (Large), T-Shirt (pink)".
I'm sure there's an easy way to do this in SQL Server 2000 but I've not been able to work out how to do this and I couldn't see anytihng in SQL Books Online..
Today an instance periodically becomes unable to accept connections. The service will respond to a service-shutdown and when restarted will accept connections for a minute or two but then refuses to accept connections or service active connections. We have gone through several cycles of this.
The log contains rows of :
2007-12-03 13:16:33.46 spid2 Process ID 55:0 owns resources that are blocking processes on Scheduler 7. 2007-12-03 13:16:38.47 spid2 Process ID 55:0 owns resources that are blocking processes on Scheduler 7. 2007-12-03 13:16:43.49 spid2 Process ID 55:0 owns resources that are blocking processes on Scheduler 7.
I am trying to use a linked server and it works as long as I do not specify the sp_addlinkedserver @provstr parameter. If I specify that parameter I always get a 7416 "Access to the remote server is denied because no login-mapping exists" error. I have tried adding the logins various ways but it's very specific to the @provstr parameter, and it doesn't even matter what I put in that parameter. As soon as I put something in there whether it is valid or invalid, I get the error.
Anyone else seen this? There is an amazing lack of any discussion about the error when I search for it.
It doesn't even make any difference what I put in the @provstr parameter - the sp_addlinkedserver statement always executes without an error, but running a query that uses the linked server generates the error.
I have MS SQL Server 2005 Developer Ed. and try to make a database diagram of remote MS SQL Server2000 database in MS SQL Server Management Studio. I receive an error "Database diagram support objects cannot be installed because this database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database diagram support objects."
Has anyone experienced performance degradation after converting / uprading from SS7 -> SS2000 ? .... wrt executing a reporting stored proc. that creates dynamic sql and makes extensive use of temporary tables.
If so, what measures were taken to progress towards a final resolution ?
Our scenario:
SS7 code was executed in isolation. ie. it was the only instance running on the box. When the SS7 job had completed, the SS7 instance was shutdown and the SS2000 instance was started .... then the SS2000 code was executed
- Identical h/ware (The SS7 and SS2000 were installed on the same box) - Identical schema, indexes, triggers, views - db files on identical RAID5 array - Stats updated - Tables reindexed - data & procedure caches purged
Note that the temporary table(s) were NOT indexed.
We have several servers, each with many jobs. Some jobs run as Owner "SA", and some jobs running as various domain admin accounts. We have been told to modify all jobs to run with Owner "SA". Now, some of the jobs read or write flat files and I am a little concerned about this. Does the domain account which starts the SS2000 services determine the rights to read and write files? If so, I guess changing all jobs owners to "SA" has no real risk?
Requirement: Some data (basically a SELECT) FROM SQLServer(2K) toOracle/Lnux on a CONTINUAL basis.Does NOT need to be Real-Time...can be like (Oracle's) Materialized View,i.e. automagically refreshable.What are my options in impleneting this process ?thanks--10gR2/Linux
Is it possbile to migrate SS2000 DTS packages to SS2005 SSIS involving databases with compatibility mode set to 80. If yes, what are the potential issues, which may occur?
