SS2005 Version Compatible For PerformancePoint
Mar 18, 2008
I'm currently using the evaluation version of SS2005 and would like to use PerformancePoint with Analysis Services. PerformancePoint requires the cumulative update package 3 for SQL Server 2005 Service Pack 2, or Build 3186, according to the documentation. The version for SS2005 is the following:
MSSQLSERVER
Analysis Services
[Version: 9.00.1399.06 Edition: Enterprise Evaluation Edition Patch level: 9.00.1399.06 Language: English (United States)]
The same version, patch level is repeated for all of the SS2005 components. Do I have a compatible SS2005 version for PerformancePoint.
Thanks,
Tom
View 5 Replies
ADVERTISEMENT
Dec 12, 2007
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
View 16 Replies
View Related
Feb 14, 2007
Hello,
I have installed SSs2005 - Standard Edition.
During this installation, also Visual Studio is installed.
I do not understand what i can do with this Studio version.
I mean, i understand that with SS2005 there is a connectivity between sql server and visual studio. For example i could create store procedures with Visual Studio. (clr applications).
But when i start the Viual Studio screen i can only select Business Inteligence Projects.
What do i need, when i want to create functions, stored procedures and what do i need to develop SMO applications?
Please give me some light on this matter.
View 1 Replies
View Related
Jul 29, 2007
I tried to install SQL SERVER 2005 through SQLEVAL64 (IA64) on Window vista 2007, Intel core 2 duo processor. Like many other software (including my lexmark printer driver), SQL SERVER 2005 does not seem to be working. Anyone has any work around solution or had similar experience ?
View 4 Replies
View Related
Mar 19, 2008
while connecting to Reporting Services from Mangament Studio getting following error
"The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)"
any ideas???
View 8 Replies
View Related
Sep 27, 2007
Locally I develop in SQL server 2005 enterprise. Recently I recreated my db on the server of my hosting company (in sql server 2005 express).I basically recreated the tables and copied the data in it.I now receive the following error when I hit the DB:The 'System.Web.Security.SqlMembershipProvider' requires a
database schema compatible with schema version '1'. However, the
current database schema is not compatible with this version. You may
need to either install a compatible schema with aspnet_regsql.exe
(available in the framework installation directory), or upgrade the
provider to a newer version.I heard something about running aspnet_regsql.exe, but I dont have that access to the DB. Also I dont know if this command does anything more than creating the membership tables and filling it with some default data...Any other solutions/thought on what this can be?Thanks!
View 4 Replies
View Related
Apr 12, 2008
Hello everybody!I'm using ASP.NET 3.5, MSSQL 2005I bought virtual web hosting .On new user registrations i have an error =(The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version. On my virtual machine it work fine but on web hosting i have an error =(What can you propose to me?
View 2 Replies
View Related
Sep 13, 2007
I have SS 2005 express* working(yrs) on a XP home ver. laptop. I got a new Acer w/ Vista hm/premium and I registered/can't get SS 2005 express* to download from MSDN.
Norton's gives a file block, I click the 'download file' and nothing happens. No dialog, hd drv activity, nothing - just 'Done'
on IE7 status. I have Visual Web Developer beta v2 2008** running on the Acer and don't want to trash the install.
.NET fwrk v2.0 is listed required for SS2005, but .NET fwrk v3.5 says it includes v2.0 + WCF,...(right? - install both?)
I need a SS for VWD 2008. I've ask/tried several times. What am I doing wrong?
Mark
View 1 Replies
View Related
Jun 19, 2006
I downloaded the DVD image to a PC and the DVD drive fails.
Now, when I try to download the executable for install instead, nothing downloads.
Is SQL SVR 2005 eval limited to one download?
View 3 Replies
View Related
Apr 18, 2007
i have a diagram in 2000 but im trying to open it in 2005.
there is some compatibility issues. anyone know how to work around this?
View 2 Replies
View Related
Jun 28, 2006
I have been doing some research on SQL Server 2005 Express. We have recently purchased Visual Studio 2005 Professional Edition which comes with a copy of SQL Server 2005 Developer Edition. My question is this: Once we complete development using VS Pro + SQL Server DE, will we be able to load SQL Server Express on the client's machines and be able to have full functionality of the database that we have created to be used with the program? I have read that SQL Server Express IS in fact compatible and fully integrated with VS Express, but i have not read any information saying wheather or not it is integrated with VS Pro/SQL Server DE. Does anyone know if it is or not, and either way know the difficulty in converting it (ie. loss of data, tables, etc)?
View 1 Replies
View Related
Apr 30, 2007
I have MS SQL Server 2005 Developer Ed. and try to make a database diagram of remote MS SQL Server2000 database in MS SQL Server Management Studio.
I receive an error "Database diagram support objects cannot be installed because this database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database diagram support objects."
View 1 Replies
View Related
Nov 14, 2007
Every time a transaction log is dumped we see the following message in the log file:
BackupDiskFile:penMedia: Backup device '\s-sqlbkups-1g$myserverlogmy_databasemydatabase_backup_200711071430.trn' failed to open. Operating system error 2(The system cannot find the file specified.).
Source spid139
Message
Error: 18204, Severity: 16, State: 1.
And yet, the actual log dump appears fine and the file is found on the share. The dump is done with a maintenance plan.
Any ideas?
View 2 Replies
View Related
Oct 13, 2006
Hello!
I have been trying to find a T-SQL function that would calculates a Median statistical value for me. I am runnnig on SS 2005? Any examples of using this function would be greatly appreciated.
Thanks for any responses!
View 7 Replies
View Related
May 29, 2008
I'm trying to migrate/upgrade some databases from 2000 to 2005 and am having a problem. Apparently, the Upgrade Advisor can't analyze a SS2000 database if it is in a named instance. (see below)
This problem occurs because the SQL Server 2005 Upgrade Advisor cannot connect to the named instance of SQL Server 2000.
The SQL Server 2005 Upgrade Advisor uses information that the SQL Server Browser service returns when the SQL Server 2005 Upgrade Advisor tries to connect to an instance of SQL Server 2000. However, the SQL Server Browser service cannot return the correct information about the connection request. Therefore, the connection fails.
http://support.microsoft.com/kb/908454
Doesn't this make the UA tool useless for named instances on SS2000? Are there any plans to correct this issue? Or, is there a workaround available?
Keith
View 7 Replies
View Related
Jan 16, 2008
I have a website with Visual Web Developer. I was looking into buying microsoft sql server developer edition because i really need the import/export feature. However, on a review of the product someone mentioned that the two are not compatible. To install MSDE he had to uninstall VWD and it would not let him re-install VWD, or any other express editions for that matter. Basically if you try to use MSDE you cannot use any express editions. Does anyone have any experience with trying to use MSDE and VWD?
I dont want to shell out 50 bucks for something i'm not going to be able to use.
Thanks everyone!
View 5 Replies
View Related
Jul 23, 2007
I wouldn't believe it if someone told me, but a compact edition database I updated on a Vista machine cannot be added to when used by Mobile 5, but the same thing works just fine on XP.
I have base compact edition database I have created with mostly empty tables under XP. Through my desktop program, the user can select items he/she wishes to "copy" over to my base compact database. So in doing this "copy", I create new rows in the compact database within my desktop application. Currently I am just doing this to a location on the desktop machine hard drive and then manually copying over the database to the device (So I have taken talking through "RAPI" out of the equation). But whenever I try to add a new row to any of my tables in my database through my mobile application I get the error:
{"QP is missing and it is required to evaluate default expressions. Ensure that sqlceqp30.dll is in the same directory as the storage engine (sqlcese30.dll)."}
I have done it with multiple devices and get the same result. If I run the same code on an XP machine, everything works fine, but if the compact database was updated with Vista, I receive the error. I can take the database created using the Vista machine and look at it in Visual Studio and add new rows there without issue. The mobile device and desktops are running SQL Mobile 2005 Compact Edition and they show up in the Add/Remove Programs on all the machines.
Does anyone have any ideas of why Vista would be creating a "incompatible" compact edition version? Any ideas for trying to debug this would be appreciated.
Thanks.
View 3 Replies
View Related
Sep 1, 2014
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
View 4 Replies
View Related
Jul 25, 2006
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
View 1 Replies
View Related
Feb 19, 2008
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies
View Related
Oct 30, 2007
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies
View Related
Mar 11, 2006
Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
View 7 Replies
View Related
Jan 7, 2008
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
View 1 Replies
View Related
Jan 31, 2007
Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
View 1 Replies
View Related
Sep 22, 2015
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies
View Related
Jul 16, 2007
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
View 4 Replies
View Related
Jan 27, 2007
SQL Server 2005
Hi Everyone. We have a stored proc that performs several bulk inserts. I need to find a way to allow the bulk insert to truncate data. Also, I would like to be able to send back to .NET the exact line that failed if a failure does occur.
Right now, the stored proc fails because of truncation. Could this be because there's a check for @@ERRROR <> 0 right after the bulk insert? Does anyone know if a truncation occurs, if that will "throw" an error to the catch block? This is NOT what we want. Can anyone help me to understand how to do this correctly?
Thanks,
Angel
View 5 Replies
View Related
Jun 29, 2006
Hi there!
I expercience some problems in sending the alert mails to the operator when an Agent Failure Alert happens.
I have setup MSSQL 2005 with merge replication and have setup mail the ss2005 way. I also can send test mails via the Database mail context menu.
I have setup a operator with a valid emailadress and enabled is checked
On the notifications page 'Agent Failure Alert' is checked.
When this alert fires the number of occurences in the history of this alert is incremented (as I can see via the alertsection-Agentfailure-history) this alert is also enabled. The problem is that the operator does not get notified!
So I can send test email from the DB, have setup an Operator with emailadress, have enabled an alert and see the number of occurences of this alert increment. I don't get any alert mails. The notifications attempt in the history page of the operator does not increment. It says: [never emailed]
Well I hope you can help!
Sincerley
Edward
View 3 Replies
View Related
Dec 20, 2007
ok, so sp_processmail is deprecated and should no longer be used in SS2005.
how do you process and execute a SS2005 query using an incoming email??
can it even be done in SS2005??
thanks for any ideas,
chester
View 4 Replies
View Related
Feb 21, 2008
I'm trying to create a SQL Agent job and schedule that executes an SSIS Package, but when I try to run the job I get the following error:
Executed as user: adApp1. The package could not be loaded.
The App1 user is the Identity used in the Credential for the Proxy which has the SSIS Packages Subsystem.
The package encryption is set EncryptAllWithPassword and that password is included in the Command line with the /DECRYPT option.
The package is stored on the server in the SSIS Package Store and was placed there via the Import package option. Does the method matter?
One thing that I haven't been able to track down is exactly what permissions the domain account adApp1 needs on the server or in SQL Server, if any, in order to run the package. Not sure if that has any affect anyway.
Any information would be greatly appreciated.
Thanks
View 10 Replies
View Related
Sep 7, 2007
I understand that only Enterprise Edition has support for Fuzzy Lookup and Fuzzy Grouping transforms, but we will likely be migrating to Standard shortly - Enterprise would be complete overkill for our organisation and needs, and is beyond our budget constraints too.
I have been using these in the CTP of Katmai, and have found them exceptionally useful for my work.
Any chance of these transforms being made available as an "add-on" for Standard (or other versions)?
It does not seem that it is something inextricably tied to the different versions - just a licencing decision, right?
Or would the proposal be to go with Standard and one additional purchase of Developer Edition?
Sham
View 1 Replies
View Related
Mar 11, 2008
Hello,
Is it possbile to migrate SS2000 DTS packages to SS2005 SSIS involving databases with compatibility mode set to 80. If yes, what are the potential issues, which may occur?
Sajish
View 6 Replies
View Related
Jul 9, 2007
I have an SSIS package that takes data from a table in Access and puts it into a fact table in SS2005. Very little data manipulation is done. It processes approximately 1.5 million rows when it runs weekly. The process is run in an SSIS package that is called by a parent package, and all of that (including the use of the config files and accessing the parent variables) is working fine.
The issue is there is one field in the Access table that must be put into a different SS2005 fact table.
When I run the data flow task that loads the first fact table, it completes in less than two minutes. However, if I either (a) put a multicast step in the dataflow task to redirect a copy of the key data and remaining field to the second fact table, or (b) copy that step in the package to have it perform the same tasks with the different target (and using just the key and the remaining field), the execution time suddenly jumps to 30 minutes. In the case of (b), it remains true whether the copied step remains in the package or is executed in its own package, and also remains true if the package is loading against a table that starts out empty or with data already in it.
Has anyone ever bumped into a situation like this?
View 3 Replies
View Related
