We use SSIS to download data from a DB2 database using DB2 Connect and MS OLE DB as source and target drivers. It runs fine most of the time BUT there is one issue that we can not solve.
Sometime DB2 table is being used by some other processes, or in other words two different processes are trying to access same table and rows and the situation is what termed as CONTENTION. So one of those processes will fail and finally only one will succeed. We don't have a control over this DB2 source, and don't know what other processes might be running on it.
Our problem is SSIS fails and doesn't returns any error in the log file for this Contention situation. We only know it when our application reports that certain data is missing OR we check that DTS failed on some step (not neccesarily on same always), but then error log doesn't gives us any error message.
Could anyone please analyze and instruct if there are some ways in SSIS 2005 to catch such errors, or to avoid such situations. Feel free to write questions if you have any.
I am new to MS DTS and i am using MS SQL 2000 as my database. I am trying to do a Bulk insert using MS DTS package. The package is trying to load data from Text file to a SQL 2000 table. When runninh the package i am getting an error saying that 1 task failed during execution and the task is shown in red colour indicating that the task has failed. Now when i get the details of the error it shows the follows:
Could not bulk insert because the file D:DtsFile.txt could not be opened. Operation system error code: 21 (The device is not ready).
Please help me in solving this problem, if any one has got this error and resolved or have any idea of the error please help. :)
Hi, I have hourly job running which I inherited from developers. I get this errors in the job. I can't figure out what's wrong and why it's failing. I can't troubleshoot it either because I do not have exact dev enviornment to reproduce the problem. error is attached. Please advise ================= Executed as user: USsqldbagent. ...Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:06:02 AM Error: 2007-08-21 10:06:03.30 Code: 0xC020837F Source: Fill Update Table with new data DataReader Source [1] Description: The data type of "output column "AvailabilityBy" (1885)" does not match the data type "System.String" of the source column "AvailabilityBy". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004706B Source: Fill Update Table with new data DTS.Pipeline Description: "component "DataReader Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004700C Source: Fill Update Table with new data DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-08-21 10:06:03.30 Code: 0xC0024107 Source: Fill Update Table with new data Description:. The step failed. =========== I can run the job for testing. I can't really change anything on server to test this other than database. Thanks a lot in advance
I have created a SSIS package with a Fuzzy lookup transformation.
It matches on 18 columns, looks for a 95 % match and has 50 variables that are passed through the transformation.
When I run the transformation it fails with the following error :-
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation. Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E. Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039. Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
I have tried all suggestions to fix this e.g. implement SQL Server 2005 service pack 2 - didn't fix it, up your virtual memory - didn't fix it.
When I try to load an SSIS package via C# code I get the following error message:-
"The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. "
The code is pretty straightforward:-
Application app = new Application();
PackageEvents evts = new PackageEvents();
Package pkg = new Package();
Package pkg = app.LoadPackage("C:\Documents and Settings\dominic_s\My Documents\Visual Studio 2005\Projects\SSIS_Util\bin\Debug\DTS\Cleanup_Staging.dtsx",evts,true);
return pkg;
What's interesting is this error message only appear's when I Start Debugging (F5 in VS 2005). If I Start without Debuggging (CTRL+F5) I dont get this error message. I've tried almost everthing suggested by other posts in this forum related to the same issue but nothing seems to work.
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte) DTExec version is 9.00.3042.00 on both servers. HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010021 Source: Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint". End Error Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014. Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. Source: Started: 12:33:21 PM Finished: 12:34:53 PM Elapsed: 91.938 seconds
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job. When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load." I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically: 1. The Precompile property is already set to True. 2. I have already verified that the script was compiled. Any further suggestions?
I have DTSX package where all the Control Flow Boxes are connected by precedence constraints (the Green Lines). However, only half of them visible! If I try and add another it says:
Cannot create connector. Only one workflow can exist between the same two executables. I don't want to have to drop and create them all the constraints (because there are a lot of them!) But I can't even do that - since I can't see them, I can't select them; and I don't think I can delete them without being able to select them. Am I missing something? Zooming in makes everything larger, but it doesn't make my Green Lines reappear. Help!
And yes, I'm using the latest version of everything:-
Microsoft Visual Studio 2005 Version 8.9.50727.762 (SP.050727-7600)
SQL SERVER 2005 9.00.3054.00 SP2 Developer Edition
I installed the Feature Pack Balanced Data Distributor control on my PC to use with SQL Server 2014 64 bit. I have used the control with SQL Server 2014 and SSDT so I was familiar with the process. Unfortunately, I cannot get the control to appear in the toolbox. No error messages appear, BDD just doesn't appear in the toolbox. I have tried un-installing, reinstalling, installing SQL Server 2014 SP1, installing again, rebooting a number and nothing works. The control just does not appear in the toolbox. It doesn't not appear when I go to choose items either. What does it take to get BBD to appear in the SSIS Toolbox for VS?
In the report, I am using Format(field,"dd-MMM-yyyy"), but somehow the result comes out recognizing my month as day and my day as month. How do I fix this?
ie. my report date is 11/06/2015, the result shows 11-Jun-2015 instead of 06-Nov-2015.
my database is already deleted and there is no job are running for that database .previously we configure a log shipping for that database and deleted.log shipping backup job also deleted.the log shipping alert job is throwing bellow error.
The log shipping primary database tes1 has backup threshold of 60 minutes and has not performed a backup log operation for 132722 minutes. Check agent log and logshipping monitor information.
Presently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Peter Piper #Error #Error peterpiper@mycompany.com #Error Donald Duck #Error #Error donaldduck@mycompany.com #Error etc.
When I run the subreport directly, it correctly returns all the values:
Peter Piper 123-345-6789 Calgary peterpiper@mycompany.com T Donald Duck 987-654-3210 Calgary donaldduck@mycompany.com F
Here are the details on SQL Server 2008:
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64) Feb 25 2011 13:56:11 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)
Hi all., I am trying to schedule a SSIS package into SQL Job., for that I created a account with sysadmin role which named karthikm., I create a new proxy settings., with all the permissions.,
But still the Job fails.,
Error message: The job failed. The Job was invoked byUserkarthikm. The last step to run was step1(Step1).,
Message The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
I am trying to run a SSIS package from a job. But the job fails. The Package extracts data from an MS Access database, and pumps into the SQL Server 2005. And the Access mdf file is located in a network shared location. While developing, I mapped the network share location to a local drive letter, and finished th dev work, and added a XML config file to point to the shared location. But when I tried to run the same package from a job, it fails with an error, unable to access the Q: drive. I even tried creating the same network drive on server, and it still fails with the same error.
I have tried to read the properties using the script from the below location, and package loads the configs from XML perfectly. http://blogs.conchango.com/jamiethomson/archive/2005/10/10/2253.aspx
The same package runs perfect, when I run from VS on server, or directly from Management Studio on server. But, only the job fails.
[The Access mdf contains linked xl files mapped to Q drive, but I am not using any of those linked files. Does the package validate the whole access mdf file before if establishes a connection? Even though, I have created a Q: drive on the server too, it fails]
I am unable to figure out the problem. Anybody had the same problem?
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
When I use the OLB data source (SQL SERVER 2005), select * from tableA, then use several steps and then Union ALL and Fuzzy Match, the process works fine. When I change the data source SQL to include two tables with a cross join, the new fields in Table B do not appear in the Union ALL or Fuzzy Match steps but do appear in all steps prior. The advanced editor refresh does not fix the problem. Deleting and recreating the Union ALL shows the Table A and Table B fields. Fuzzy Match is still incorrect. Deleting and recreating Fuzzy Match fixes it.
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up' EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
Hi, I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties: Type: SQL Server Integration Services Package Run As: SQL Agnet Service Account Package Source: File System Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
When I run this from Windows Command Prompt (DOS) it runs successfully but when run from SQL Management Studio (Query nalyser) using xp_cmdshell it fails. Any help is appreciated.
This runs with SUCCESS. ------------------------- Dtexec /F "E:PackSSIS_Total1.dtsx" /SET package.variables[User::strStatusEmailTo].Value;"xyz@abc.com" /SET package.variables[User::strFileSystemRoot].Value;"Z:" /SET package.variables[User::strServerName_Admin].Value;"pacers"
ERROR: ------ End Progress Progress: 2008-03-17 12:28:53.13 Source: DFT Format Log Info Validating: 100% complete End Progress Progress: 2008-03-17 12:28:53.15 Source: DFT Table Extract to File Validating: 0% complete End Progress Error: 2008-03-17 12:28:53.15 Code: 0xC0202009 Source: MyPackage Connection manager "encore_cm" Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.". End Error Error: 2008-03-17 12:28:53.18 Code: 0xC020801C Source: DFT Table Extract to File OLE_SRC tblFileConfigMaster [1] Description: The AcquireConnection method call to the connection manager "encore_cm" failed with error code 0xC0202009. End Error Error: 2008-03-17 12:28:53.20 Code: 0xC0047017 Source: DFT Table Extract to File DTS.Pipeline Description: component "OLE_SRC tblFileConfigMaster" (1) failed validation and returned error code 0xC020801C. End Error
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
I am trying to generate Excel documents from SQL DB 2005 using SSIS packages. I created a schedule, which works fine when it runs every 5 minutes etc, but it stops when I change back frequency to once a day. Schedule works only once, and second day not with following error code:
Code: 0xC0202009 Source: Data Flow Task Destination - Query [22] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2008-05-20 10:43:01.46 Code: 0xC02020E8 Source: Data Flow Task Destination - Query [22] Description: Opening a rowset for "Query" failed. Check that the object exists in the database. End Error Error: 2008-05-20 10:43:01.46 Code: 0xC004701A Source: Data Flow Task DTS.Pipeline Description: component "Destination - Query" (22) failed the pre-execute phase and returned error code 0xC02020E8. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:43:00 AM Finished: 10:43:01 AM Elapsed: 0.609 seconds. The package execution failed. The step failed.
On my laptop I've got SQL2005 developper edition SP1 with 3 SSIS-jobs scheduled through SQL-agent.
These 3 SSIS-jobs are in fact maintenance plans which are also used on our production SQLServers.
These take backups (full, transactional), Cleanup old backups, reorganize indexes, update stats ...
One of these jobs runs every hour to take transaction logbackups. After installing SP2 this started failing.
When I opened the sources of that job in visual studio It seemed like the unit of thime was changed for cleanup jobs fe cleanup bak-files after 4 days changed into after 4 hours. The backup task for transactional backups which had the property to do that for all databases whas changed into specific databases which no database selected. Even when I changed that into All databases and saved it, when I opened that backup task again, this was changed back into specific databases with no database selected.
I uninstalled SQL2005 and reinstalled it, including SP1 and everything works well again.
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain. Your help will be very helpfull since this is the production issues.
I was able to run the PAckage successfully under local server. but when i deployed to another server and tried to run it fails.
When i run through the command line in another server -
I also tried running under File system and through Agent
Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. The configuration file name "D:Program FilesMicrosoft SQL Serv er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid. Check the configuration file name.
It does not execute the pacakge itself
When i run the package from my machine it executes the pacakge but fails at the end saying The configuration file name "D:Program FilesMicrosoft SQL Serv er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid. Check the configuration file name.
SQL server agent has to be executed form a user other than windows admin. A SSIS where an excel file is loaded into a SQL Server table has to be scheduled by a job.SSIS runs fine alone in the server but fails when called by agent job. http://support.microsoft.com/?kbid=918760#appliesto article has this specific error described but in a 64 bit server this error cannot be rectified. Any ideas?
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file: username password cd omb asc get STRMASTER quit
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
