SSIS - Data Conversion Failed - The Value Could Not Be Converted Because Of A Potential Loss Of Data.
Aug 3, 2006
Hello
I have an odd problem that is driving me nutz. I have a very simple SSIS package that imports a 5 colum flatfile into a sql Server 2005 Table.
When I created this package with the wizzard, it will execute perfectly fine and processes all rows into the destination table.
But when I hit F5 to execute it manually it will fail before inserting a single row.
The error it generates is (Spalte 5 is a Datetime in the format DD.MM.YYYY) :
Error: 0xC02020A1 at Datenflusstask, Source - Daten_NC_1_txt [1]: Data conversion failed. The data conversion for column "Spalte 5" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Datenflusstask, Source - Daten_NC_1_txt [1]: The "output column "Spalte 5" (25)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Spalte 5" (25)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Datenflusstask, Source - Daten_NC_1_txt [1]: An error occurred while processing file "C:WorkDaten_NC_1.txt" on data row 177.
Edit: Modified the Title so it properly reflects the Problem & the Solution
View 3 Replies
ADVERTISEMENT
Mar 3, 2006
With my SSIS package, I want to import data from a flat file (TXT- delimited with ?) to a table in my database in sql server 2005. The problem is that I have a column of type datetime in my table. But as you know, the data in txt is string. First I created my package through importing data and using import/export wizard in management studio to my database and selecting flat file connection. There, I selected my txt file and column delimiter as ?, then suggested types for the columns. There it selects 8 byte signed integer type for the datetime column in my table. After these steps I create my package and execute it. But it does not put data in my table in the database. It gives the error of "The value could not be converted because of a potential loss of data" or "cast conversion failed" . I tried other types of date, timestamp, string but none of them was successful. What should I do to put data in my table from txts. Please can you help me urgently!!!
Thanks a lot
View 12 Replies
View Related
Aug 29, 2007
Hi,
I am getting this error when my ssis package is running
Data Conversion failed due to Potential Loss of data
the input column is in string format and output is in sql server bigint
the error is occuring when there is an empty string in the input. what should i do to overcome this
It is an ID field and should i convert to bigint or should i leave it as char datatype is it i a good solution or is there a way to over come this.
View 4 Replies
View Related
Jun 13, 2008
I am using SQL Server 2005.
I am trying to import data from CSV files into an SQL Server table using the Import wizard. The text qualifier is double quotes ("), column delimeter is a comma (,), first row has column names. One of the field name is "id", which is a GUID, whose datatype in SQL Server is uniqueidentifier. It looks like this in the file:
..."data","data","dbf7edf8-0ca8-4e53-91e3-5901cdc1819a","data"...
As you can see, there are no enclosing curly braces for the guid value. The DTS chokes on this and throws this error:
The value could not be converted because of a potential loss of data
If I add curly braces like this {dbf7edf8-0ca8-4e53-91e3-5901cdc1819a}, it imports with no problem.
Is there way to import this type of data, because there is no way I can edit these files, and I would prefer not changing the datatype of the id field?
Or is this a limitation of SQL Server?
Thanks,Bullpit
View 5 Replies
View Related
May 17, 2007
I have a FoxPro dbf that includes From Milepost (f_mp) and To Milepost (t_mp) fields. These fields contain values between -1 and 9999.9999.
I don't have FoxPro installed, but when I attach the dbf to Access, I see the fields defined as datatype Double.
I have a SQL table that I'm trying to import the dbf data into. In that table the two fields are defined as datatype Real.
When I execute the task, it fails at the first milepost value with 4 digits to the left of the decimal point.
I read up on datatypes, then redefined the milepost fields as Floats, but nothing changed.
Any ideas or suggestions would be greatly appreciated.
ginnyk
View 3 Replies
View Related
May 30, 2006
During import from CSV i am getting following error "The value could not be converted because of a potential loss of data". My CSV file contains a column "years" and i have selected datatime in the import wizar. Can I scape from this error and import all my data.
Waqar
View 1 Replies
View Related
Jan 29, 2008
I've searched the threads and didn't see anything which seemed to fit this specific issue....
I have a Data Flow task which reads from an OLE DB Source (SQL Server 2005), uses a Data Conversion transformation to convert some field values, and finally outputs the result to distinct tabs of an Excel workbook. The task is failing with the following error:
There was an error with input column "oBBCompanyName" (2162) on input "Excel Destination Input" (57). The column status returned was: "The value could not be converted because of a potential loss of data.".
Using the Advanced Editor for the Excel Destination component, I examined the datatype of oBBCompanyName (ID = 2162) in the Input Columns list of the "Excel Destination Input" (identified with ID = 57). The Data Type is defined as DT_WSTR with Length = 255. The ExternalMetaDataColumnID = 203.
Also in the Advanced Editor for the Excel Destination, I examined the datatype of BBCompanyName (ID = 203) in the Extranl Columns list of the Excel Destination Input. The Data Type is defined as "Unicode String [DT_WSTR] with Length = 255.
What could I be overlooking that might be the root cause of this issue? The same error is occurring for different Excel Destination tasks in the data flow.
Kind regards,
Orlanzo
View 4 Replies
View Related
Jun 19, 2007
Hi,
I am getting the error below in my Flat File Source.
I've seen this error many times before, and have successfully resolved this problem in the past.
However, this time it's a little different. It's complaining about row 7 of myFile.csv, column 20. I have column 20 defined as a Numeric(18,6). It also maps to the Price field in the table, which is also a Numeric(18,6).
The problem is, on row 7 of myFile, column 20 is blank. That is, there's no data for row 7, column 20.
So, why should it care about this?? If it's blank, then how can you lose any data?? I have several other blank columns in this file, but they aren't throwing any errors. Just this one.
Thanks
Errors:
[Flat File Source - myFile [1]] Error: Data conversion failed. The data conversion for column "Column 20" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Flat File Source - myFile [1]] Error: The "output column "Price" (333)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Price" (333)" specifies failure on error. An error occurred on the specified object of the specified component.
[Flat File Source - myFile [1]] Error: An error occurred while processing file "d:myDirmyFile.CSV" on data row 7.
View 21 Replies
View Related
Dec 6, 2007
Hi
I am having a bit of a difficult trying to understand this one. I had imported two tables around 2-300 rows each ran this in 64 bit scheduled it and it ran okay. I now introduced a 3rd table which if I change the true64bit to false it will run however if left true it keeps mentioning the output column of descr with a loss of data.
I did move it to 32bit and then ran the package it comes up as below. If I rememeber I can run this in 32bit mode which I'm sure will work hmm maybe!! but what I can't understand is why it works for two tables? is it something to do with the translation of the table or do I need alter the select statement?
Currently it is a select *
Executed as user: jvertdochertyr. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:30:11 PM Error: 2007-12-06 22:30:21.02 Code: 0xC020901C Source: st_stock st-stock out [1] Description: There was an error with output column "descr" (56) on output "OLE DB Source Output" (11). The column status returned was: "The value could not be converted because of a potential loss of data.". End Error Error: 2007-12-06 22:30:21.02 Code: 0xC0209029 Source: st_stock st-stock out [1] Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "descr" (56)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "descr" (56)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. End Error Erro... The package execution fa... The step failed.
View 14 Replies
View Related
Jun 26, 2007
Hi,
I have a flat file that has a date column where the date fields look like 20070626, for example. No quotes.
The problem is that several of the date values are missing, and instead of the date value the field looks like this , ,
That is, there are several blank spaces where the date should be. The number of blank spaces between the commas doesn't appear to be a set number (and it could even be 8 blank spaces, I don't know, in which case I don't know if checking for the Len will produce the correct results, but that's another issue...)
So, similar to the numeric field blanks problem, I wrote a script to convert the field to null. This is the logic I used:
If Not Len(Row.TradeDate) = 8 Then
Row.TradeDate_IsNull = True
End If
The next step in my data flow after the script is a derived column where I convert TradeDate from 20070625 to 06/25/2007. So the exact error message I am receiving is this:
[OLE DB Destination [547]] Error: There was an error with input column "TradeDate - derived" (645) on input "OLE DB Destination Input" (560). The column status returned was: "The value could not be converted because of a potential loss of data.".
Do I need to add a conditional split after the script and BEFORE the derived column to redirect bad rows so they don't go to the derived column?
What am I doing wrong here?
Thanks
View 9 Replies
View Related
Aug 7, 2007
Hello,
I have a flat file source with ragged right format. It has three columns.
My package fails when the last column has null values.
It says "The value could not be converted because of a potential loss of data".
So tried lot changing row delimiter and column delimiter but to no avail.
So any idea on this is well appreciated.
Thanks in advance.
View 3 Replies
View Related
Jan 30, 2008
Why would I get these errors:
" SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".
There was an error with input column "UniqueID" (3486) on input "OLE DB Command Input" (3438). The column status returned was: "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 : SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Command Input" (3438)" failed because error code 0xC0209069 occurred, and the error row disposition on "input "OLE DB Command Input" (3438)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure."
I read related posts but could not figure out the error?
View 3 Replies
View Related
Jul 16, 2007
The following error is encountered when importing a delimited flat file with date of fomat "dd.mm.yyyy"
Error: 0xC02020A1 at Data Flow Task, Source - DCDtest_xpt [1]: Data conversion failed. The data conversion for column "value date" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
This was when I manually built the package.
I get the same error when using the Import/Export wizard
I am even using the "suggest types" button and have tried sampling the default number of rows (?200) and also 2000.
The type it suggests is DT_DATE.
But reading the BOL, this would appear to be the wrong type:
http://msdn2.microsoft.com/en-us/library/ms141036.aspx (obviously the right hand doesn't know what the left hand is doing)
seems to indicate that
DT_DBTIMESTAMP
is the correct value
(I cannot believe that they have different datatypes in SSIS than in SQL. I can't believe for a minute this is for all the hundreds of thousands of Oracle users who obviously switched to SSIS when they saw what a high quality product it is.)
I tried other DT_... values but no dice.
Can anyone help?
I always thought that Classic ASP was the worst product I've ever worked with from the Microsoft stable, but I was wrong.
I am fed up of having to post on this board (no wonder it is so 'popular')
Talking to peers, reading books, googling nearly always enables me to figure out a problem with any application I have ever used, but SSIS breaks the mould in sheer crapness and the weirdnes and unfathomability of its cryptic errors,.
Rant over (for today)
View 9 Replies
View Related
Nov 19, 2007
I'm getting a very strange potential loss of data error on my flat file source in the data flow. The flat file is fixed width and the column in question is defined as numeric [DT_NUMERIC]. The transform runs great if this column IS NOT A ZERO. As soon as a zero value is found, I get the error. It errors on the flat file source, so I haven't been able to use a data viewer to see what's going on.
Please Help!?
Thanks,
Scott Mescall
View 8 Replies
View Related
Apr 9, 2007
I'm trying to build a DTSX package that FTP's an XML file to the local file system and then imports it into an existing table.
My "Data Flow" for the package starts with an XML Source component and then goes to Data Conversion component and then to an OLE DB Destination component.
It all executes with out error and seems to work fine, but when I look at the data in the table after I've run the package it seems to have inserted the appropriate number of rows from the XML file but all of the column values are NULL.
All of the data in the XML file is surrounded by <![CDATA[ ]]> and I discovered that if I remove the CDATA wrapper by hand then it inserts the data properly. The only problem is that I'm not in a position to have the data provider remove the CDATA tags and some of the data in the XML file needs the CDATA wrapper or else it will not validate.
Anyone know of anything I can do to get the CDATA to import properly?
View 15 Replies
View Related
Dec 15, 2006
[Flat File Destination [46500]] Error: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page." What does this error mean exactly?
I am taking columns from a flat file source. Then I am adding some new columns then rewriting the file to a ragged file format with fixed column values. I've taken the Destination component off and it works fine. So I know it could be the destination component but what could it be? Any ideas?
View 6 Replies
View Related
Sep 6, 2007
Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.
View 6 Replies
View Related
Jan 7, 2008
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
View 11 Replies
View Related
Dec 10, 2006
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
Please help.
regards,
kong
View 1 Replies
View Related
Dec 10, 2006
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
Please help.
regards,
kong
View 1 Replies
View Related
Sep 4, 2015
I have a a table which has a column:material_desc nvarchar(255)...I am loading data using SSMS import from a csv file. While laolding a line:Concentrate of Poppy Straw (Material Specification Name)I get error: Error 0xc02020a1: Data Flow Task: Data conversion failed. The data conversion for column "Column 1" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".I though this error was because 255 size in nvarchar is 255, so I increased it to 1024, but I still got this error. I do not think error is because size of my column is small; it has to do something else. I changes Specification Name to Sprec Name, then row was loaded.
I come from Oracle background. I fail to understand reasons for trunction; is there some option to be set, but import wizard does not provide any options.
View 2 Replies
View Related
Nov 12, 2007
Hi all,
I have a problem while transforming data from an Access DB to an SQL 2005 DB.
Context:
- Migration of packages from SQL 2000 to SQL 2005
- DB SQL 2005 is a back up from SQL 2000
- The access DB is the same than the one used with SQL 2000
Error:
[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Access Source:
tblSource
ID DateID ConfigIDRequest FromTime ToTime
43221 01.01.2007 362 00.00 05.30
43233 01.01.2007 362 21.10 23.59
43234 01.02.2007 362 00.00 05.30
43244 01.02.2007 362 21.10 23.59
43247 01.03.2007 362 00.00 05.30
...
In the access table, the datatype of ID is "AutoNumber" :
- field size : Long Integer
- new values : increment
- indexed : yes.
SQL Destination:
tblDestination
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblDestination](
[ID] [int] NOT NULL,
[DateID] [nvarchar](10) NULL,
[ConfigIDRequest] [int] NULL,
[FromTime] [nvarchar](5) NULL,
[ToTime] [nvarchar](5) NULL
) ON [PRIMARY]
SSIS Package description:
- Control Flow:
* Data Flow Task
- Data Flow:
* OLE DB Source pointing to tblSource, using AccessCon
* OLE DB Destination pointing to tblDestination, using SQL2005Con
- Connections:
* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb
* SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server
NB: All those components are default configured
Previous tests executed:
1. OLE DB Source Preview : OK, same records.
2. Error redirection to flat file for ID column : here are the first records
ErrorOutput.txtErrorCode,ID,DateID,ConfigIDRequest,FromTime,ToTime, ErrorColumn
-1071607691,43221,01.01.2007,362,00.00,05.30,32
-1071607691,43222,01.01.2007,363,05.30,05.50,32
-1071607691,43223,01.01.2007,366,05.50,06.20,32
-1071607691,43224,01.01.2007,370,06.20,12.20,32
-1071607691,43225,01.01.2007,365,12.20,13.00,32
3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.
Questions:
- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation?
- Why is this working for 2000 and not 2005?
- Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB).
- May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?
Thanks,
Romain
View 6 Replies
View Related
Apr 29, 2008
Hi All,
I am facing very weird issue...
When i am running package thru SQL server job and getting follwing error:
SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.
In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.
Here are couple of points:
1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.
INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;
2) When I am running package from Solution explorer then also it works fine.
Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.
One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.
Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?
Thanks.
View 8 Replies
View Related
Nov 9, 2007
Hi all,
I have a problem while transforming data from an Access DB to an SQL 2005 DB.
Context:
- Migration of packages from SQL 2000 to SQL 2005
- DB SQL 2005 is a back up from SQL 2000
- The access DB is the same than the one used with SQL 2000
Error:
[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Access Source:
tblSource
ID
DateID
ConfigIDRequest
FromTime
ToTime
43221
01.01.2007
362
00.00
05.30
43233
01.01.2007
362
21.10
23.59
43234
01.02.2007
362
00.00
05.30
43244
01.02.2007
362
21.10
23.59
43247
01.03.2007
362
00.00
05.30
...
SQL Destination:
Destination table
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblDestination](
[ID] [int] NOT NULL,
[DateID] [nvarchar](10) NULL,
[ConfigIDRequest] [int] NULL,
[FromTime] [nvarchar](5) NULL,
[ToTime] [nvarchar](5) NULL
) ON [PRIMARY]
SSIS Package description:
- Control Flow:
* Data Flow Task
- Data Flow:
* OLE DB Source pointing to tblSource, using AccessCon
* OLE DB Destination pointing to tblDestination, using SQL2005Con
- Connections:
* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb
* SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server
NB: All those components are default configured
Previous tests executed:
1. OLE DB Source Preview : OK, same records.
2. Error redirection to flat file for ID column : here are the first records
ErrorOutput.txt
ErrorCode,ID,DateID,ConfigIDRequest,FromTime,ToTime, ErrorColumn
-1071607691,43221,01.01.2007,362,00.00,05.30,32
-1071607691,43222,01.01.2007,363,05.30,05.50,32
-1071607691,43223,01.01.2007,366,05.50,06.20,32
-1071607691,43224,01.01.2007,370,06.20,12.20,32
-1071607691,43225,01.01.2007,365,12.20,13.00,32
3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.
Questions:
- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation?
- Why is this working for 2000 and not 2005?
- Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB).
- May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?
Thanks,
Romain
View 6 Replies
View Related
Jun 1, 2008
i am getting this error when passing multiple checkbox values to next page..
Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>
View 6 Replies
View Related
Sep 28, 2006
Table:Student
Name nvarchar(1000)
Status int
In the stored procedure - I have got a string which contains comma separated Status Values such as
DECLARE @validStatus = '1000,1001,1002'
I want to return the count of students having the status code as in @validStatus
SELECT count(1) FROM Student WHERE Status in (@validStatus)
But the above statement is erroring out with
Conversion failed when converting the varchar value '1000,1001,1002' to data type int.
Any help/suggestion appreciated.
Thanks,
Loonysan
View 14 Replies
View Related
May 27, 2008
Hi guys,
My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.opor t9
ON t8.docentry = t9.docentry
LEFT JOIN comparison.dbo.podatetest('po_num') t10
ON t10.docnum = t9.docnum
WHERE t3.shorted <> 0
GROUP BY t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
t6.cardname,
t10.docduedate
ORDER BY t2.u_vlgx_plc,
t6.cardname ,
t3.product
View 14 Replies
View Related
Jul 21, 2015
I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.
View 5 Replies
View Related
Sep 4, 2007
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.
View 10 Replies
View Related
Feb 10, 2015
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select
user_member
, sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times'
, max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end)
from trx_hdr
group by user_member
View 1 Replies
View Related
Sep 3, 2015
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG
View 3 Replies
View Related
Nov 13, 2015
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,
[code]...
However when i run this query, i get an error :
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
View 10 Replies
View Related
May 5, 2008
Hi, I was using a Store Proc and it was working nice ,
Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int
Is that should make any problem as well
Just want to know ..the help
Thanks
View 5 Replies
View Related
