Hi All,
I am using a Data Flow task which copies data from an Excel Source to a SQL Database Table Destination. From 15 columns I require only 10 columns to be imported to the DB Table. So I have mapped those colums. In SQL DB there is a colum called say X, whose value should be the "Remedy" for all the columns which are imported. Is there any task that can achieve it.
Please Help.
Hi,
I have implemented a custom source component that can be used as the data source in the Data Flow task.
I have also created a custom UI for this component by using the IDtsComponentUI .
But my component does not have the capability of setting the custom properties via the DTS Variables using the Expression Builder.
I have looked around for samples on how to do this, but I can only find samples of how to do this for custom Control Tasks, i.e. IDtsTaskUI.
My question is, How can implement the Expression Builder in my custom Source component + custom Source UI. Or do you know of any samples which I can look at.
Thank you,
Jameel.
Need help regarding ssis dataflow task
I need to create a ssis package. I want to import the data from a flat file to a table.
Lets say, the table has 5 columns -- col1, col2, col3, col4 , col5.(Assume that all columns can be NULLABLE) The datafile contains the data related to only three columns say col1, col2, col3. So when I use dataflow task to import the data from the file to the table, I will only get three columns, col1, col2, col3. Columns col4, col5 will be NULL.
However, I want to populate columns col4, col5 with some values which are stored in the variable.
IS there any way to do this??
Any help would be appreciated.
Thanks
Hello, to give you a background on where I'm coming from:
I have an SSIS Package with a global String variable that has an sql statement. so it says something like: "Select * from MyTable "
I than have a SQL Script Task where I append a WHERE Statement to my string.
Than in the Dataflow Task when I select the source database, I run command from Variable.
When I run the package I get an error that my string is too long. My string is about 750 characters that I'm trying to pass through.
Is there some limitation to this?
I have ran the raw SQL Command in the SQL manager and it runs fine. I have built a million of these packages, just not one with such a large string.
If it is the case that it is just too long, is there a work around to that?
Thanks,
Rusty.
I have a problem whit loading XML-files into SQL server.
I iterate over the XML-files with the "for each file" component and use the XML source within a Data flow task. This works great until the file count got bigger. After say 1000 files the XML source returns error 0x8007000E. I think this means out of memory. Does anyone have an idea how to solv this. The load must be able to handle up to 5000 files in one batch.
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
Hi,
I am using SQL Server2005 for SSIS. I want to change the source connection dynamicaly evertime.
Let me clear, I have to extract some column from excel to MS-Access. I am using Data Flow Task and able to successfully complete the job. But problem is that, whenever a new file comes , i must have to reconfigure my Excel Source.
All the time column in file are same, so no need to worry about mapping but how can my package select a file automatically.
I have a directory, suppose "C:dpak". I should able to pick the filename and sheet name from this directory every time when my package will execute.
I have a dataflow task that load data from flat file to SQL Table.
In need to rename the file with the datestamp(current date ) at the end of filename.
I am daily getting a file like Vendor_20150820_2484.csv , Vendor_20150821_2484.csv as the file name getting changed so I cannot load data .
I want to change the file name Vendor_20150820_2484.csv to Vendor_yyyymmdd.csv.
This file I will use to load into sql...
I am trying to create a SSIS package that will create a csv of a dataset for daily events in the database. However there will be days that there was no activity and thus an empty dataset. The package still runs fine but I want to stop the package if the dataset is empty.
FLOW:
DATA FLOW task: get daily data and put in CSV file
FTP TASK: upload the file to FTP server
MAIL/Copy file task: Move the file and then send a confirmation mail on task completion status.
Pretty simple and it all works great, I do have a few complexities in there. What I would like to add and I am at a loss is at the beginning, if the OLE DB Task resultset is empty then move to Mail Task otherwise process normally. I have tried conditional split, derived columns, the only thing I haven't tried in Script task and am not sure about that yet.
Hi there,
I'm still pretty new to SSIS, what I am really battling with is getting a custom task to work.
I have developed a custom task, digitally signed it added it to the Global Assembly Cache, written the UI for it - Pretty much as it is done here: http://technet.microsoft.com/en-us/library/ms136080.aspx
but my problem is that when I drag it from the tool box into the control flow pane, I get this message: "The task user interface specified by type name 'XXXXXXXXXXXXXXXXXXX' could not be loaded.
(Microsoft.DatatransformationServices.Design).
Does anybody have an idea of what I am doing wrong here?
Duane.
I've written several custom Control Flow and Data Flow components for SSIS. I'm trying to deploy a new Control Flow Task, however it will not show up in the "Choose Toolbox Items" window.
I have my dll's all in the right place. Because of other painful issues we have not used the GAC, and instead have put our DLL's that are referenced in the following directory: C:program filesMicrosoft SQL Server90DTSBinn. This has worked fine for other custom tasks, but not for this one.
The only things that are different about this transform are the following:
1. Not only does the task inherit from Task, it also implements two interfaces that I wrote.
2. One of the assembly references is actualy an executable instead of a dll. This is unusual, but I've done it with other .NET projects and not had any trouble.
I could move the code I need from the EXE out to a DLL. If somebody knows what could be causing this please respond?
Hi,
Near the end of 2005 Microsoft made available some sample C# apps that implemented custom SSIS tasks and components. I think Doug Ladenshlager may have had a heavy hand in building them.
Does anyone know where they are? I can't darned well find them!
-Jamie
Hello All Experts,
I have created one custom task with PropertyGrid Control and two button on it. I have everything under one class library project.
Problem I am facing is when i load task and clik on Edit I can not see those properties into that GUI and even functionlity of those two buttons (OK and Cancel) not working but I am able to see those properties in default property window.
If I create this GUI as a seperate window application then I am able to see those properties in GUI and buttons also working but in SSIS I am not able to load the task.
After reading on internet about SSIS they suggest to create everything under one project which I did.
Basically I am trying to populate connection managers like Source Connection and Destination Connection when I load this task and there are much more backend functionlity but at first step i m stuck and not able to see those properties in GUI.
Please help and give your input on it. I was following "Increment Task" example given by MSDN.
If you need more info let me know.
Thanks
Hi Guys,
This is a question to the SSIS development team. I would like to know what are the requirements to implement custom SSIS Control Flow task in C++ . There is a documentation describing the process when implementing a managed task, but no such documentation exists for implementing a task in C++.
Thank you,
Ivan
I'm writing my first SSIS custom task. I have added Public properties, which appear in the standard task properties window, and to one of them I have added an EditorAttribute as follows:
<Category("General"), _
Browsable(True), _
EditorAttribute(GetType(UIFileNameEditor), _
GetType(System.Drawing.Design.UITypeEditor))> _
Public Property FilesToArchive() As String
[Code] ....
When I select the FilesToArchive property in the Properties window, I get an ellipsis that appears in the property value. When I click on the ellipsis, it brings up the FolderBrowserDialog, which is defined in the UIFileNameEditor class. This all works fine.
What I want to do is to bring up the EditorUI, the one you get when you double click on the task, and also populate that with properties which can be edited. I have a class which inherits DTSBaseTaskUI, which is displayed when I double click on the task.
I can also get properties to be displayed in that UI but I cannot get them to be editable in that UI, using the same technique as in the standard Properties window, as described above.
I am writing my first custom SSIS task and I can see that, if I put a public property into the task, I see that property in the standard Properties window. If I add a property of type String, I can put a value in that property, in the task code, and when I instantiate the task in a package, I can see the value I entered.
To try and get a drop down list property in the Properties window, I declared a property of type Combobox, and indeed a drop down list appears in that property.
My problem is trying to get values in that property. I have used the test items:
Property.Items.add("Fred")
Property.Items.Add("Jim")
But I do not see the values in the drop down list. All I do see is one item with a value of "(none)".
HI,
I need to open a File through File connection manager and want to assign these file properties to SSIS precreated varibale or Newly created varibale. I want to show file properties in Propertygrid. Properties grid will conatin File Propeties Column and SSIS varibale Combobox column. The combo box will contain New variable field. When user select New Variable field, then a new SSIS varibale window will open and we can able create New variable and that Newly created variable should add to that property comboBox.
For Instance if we create a new varibale Name "Creationdate" by clicking on New Varible in ComboBox, then that CreationDate variable should add to Property ComboBox in PropertyGrid. After adding when we select that variable Name "Creationdate" then that selected file Creation date should assign to SSIS varibale "Creationdate" field.
Any Comments or sample will help me.
Nitin
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
This is trivial I'm sure but I'll be dogged if I can find someone who mentions how to do it. I am attempting to develop a Data Flow Transformation that appends a new column (a string value) into the current stream.
I have found plenty of references on how to replace an existing column but I'd really like to just add my new column in there. It doesn't need to be configurable, it can be a static column name. I'll take a solution that allows the column name to be set at design time, don't get me wrong but the magic I'm looking for is how to implement a new column in a stream.
Yes, I am well aware of the derived column task but I will be replacing a few hundred instances and I'd much rather just drag an item onto the designer than to drag a derived column, double click it, type in the column name, set the expression and then set the datatype, etc.
Anyone spare a moment to enlighten me?
Pardon the lack of formatting, this BB doesn't play with Opera (I know, I'm a heretic)
using System;
using System.Collections;
using System.Runtime.InteropServices;
using Microsoft.SqlServer.Dts.Pipeline;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using Microsoft.SqlServer.Dts.Runtime;
namespace Microsoft.Samples.SqlServer.Dts
{
[
DtsPipelineComponent
(
DisplayName = "Nii",
Description = "This is the component that says Nii.",
ComponentType = ComponentType.Transform
)
]
public class Nii : PipelineComponent
{
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
try
{
// do something here to
}
catch (Exception e)
{
ComponentMetaData.FireInformation(0, ComponentMetaData.Name, "There was an error on row " + buffer.CurrentRow.ToString() + ". The error is: " + e.Message + " : " + e.Source + " : " + e.StackTrace, "", 0, ref fireEventAgain);
}
}
}
}
}
I've created a custom data flow tranformation and it isn't showing up in the Tool Box Items to be added under the Data Flow Items tab (right click on tool box, 'Choose Items...', then clicked Data Flow Items).
I have done the following:
signed the assembly,
added to GAC,
copied the dll to C:Program FilesMicrosoft SQL Server90DTSPipelineComponents.
It worked previously when I was just starting out, however now I cannot see it. What would cause it to not show up? Everything compiles fine. How would I determine how to fix it so that it shows up?
I have a custom component that takes in unicode stream and converts it to ascii text. However I would like to make my default string length and code page editable in the standard GUI editor. Right now I can set the default to 1000 characters, but when I try to change it, it says "Property value is not valid"
Any ideas?
Thanks!
I'm building packages programmatically and all is well. I have a new custom transform that I developed. It also works fine. Now I'm trying to add my new component to my packages when I programmatically build them, and I'm unable to do that.
Has anyone added their own custom components to a programmatically built package successfully?
I get a COM error on the line that calls ProvideComponentProperties. I've attempted various modifications including not overriding ProvideComponentProperties or just having it do nothing. I always get the same result. What I don't understand is that the custom transform works and handles ProvideComponentProperties fine when it is added to a package in BIDS.
Thanks.
'Add new dataflow task
combitronics = dataFlow.ComponentMetaDataCollection.New()
'Set assembly to my component
combitronics.ComponentClassID = "Ewrap.SSIS.Combitronics"
'Get instance of component
Dim instance As CManagedComponentWrapper = combitronics.Instantiate()
'Initialize component ***Error Occurs Here***
instance.ProvideComponentProperties()
...
Hi,
I've created a stand alone custom dataflow component in VB and I need to set up the connection to the Input and Output components and instantiate it. The only way I've seen this done is to create an entire package and Task then use the TaskHost wrapper object to instantiate the Mainpipe (IDTSPipline90 interface) so that you can create the IDTSPath90 interface and setup the connection to the input and output components...
After all that, all that I would like to know is whether it is possible to instantiate the mainpipe interface without creating a package programmatically? I've seen something Darren Green put in an answer to a thread, about accessing the Mainpipe interface in the UI, to the effect that you can access it through IServiceProvider using the interface IDTSPipelineEnvironmentService - I think that's it... But I'd like to know if there is a more straightforward route to instantiating and accessing the Task or data flow directly?
Thanks in advance,
Will.
I am working on a project that is creating a new application, my area of the project being the migration of data from the old application database, transforming it, and populating the new database.
The transformations to the old data are done in a staging database.
At the end of the process, the staging database ends up with a lot of new applications tables, populated with the migrated legacy data.
We need to move these tables from the staging database to (initially) our test databases, but ultimately what will be the live database.
We have tried using the "Transfer SQL Server Objects Task" in SSIS, but have ran into a problem that a lot of the database tables have default values for columns.
These default values are not brought over.
Example. Tables contain a "GUID" field, which has a default of value of newid()
Right clicking and the table generating the CREATE script generates
[GUID] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_tbCRM_Client_GUID] DEFAULT (newid()),
However, the Transfer objects task does not create this default of newid()
Examining the SQL generated by the Import / Export Wizard when investigating this shows that the wizard generates this column as
[GUID] uniqueidentifier NOT NULL
and the column default value is lost.
Is there something i should be setting somewhere to force SSIS to bring these column definitions over correctly?
I am writing a custom task that has some custom properties. I would like to parameterize these properties i.e. read from a varaible, so I can change these variables from a config file during runtime.
I read the documentation and it says if we set the ExpressionType to CPET_NOTIFY, it should work, but it does not seem to work. Not sure if I am missing anything. Can someone please help me?
This is what I did in the custom task
customProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
In the Editor of my custom task, under custom properties section, I expected a button with 3 dots, to click & pop-up so we can specify the expression or at least so it evaluates the variables if we give @[User::VaraibleName]
Any help on this will be very much appreciated.
Thanks
Hi All!
I was thinking of creating a custom generated IDs for my table. I would like the ID to be something like "HR001" or "IT001", the two letter prefix would indicate the dept it belongs to. Initially I thought of having a table that will hold all the seed values for the IDs but I realize that this could have some concurrency problems if there will be a multiple number of users are creating a record at the same time. So now I have totally no idea on how to deal with the concurrency problem.
I will not be using this as a primary key because I already have the Identity field to be my primary key, though of course this field would definitely be unique. I will just be using this to display in the UI.
Any inputs would be greatly appreciated.
Thanks!
Hi Pals,
Here is my scenario in my ETL process, I have one DataFlow task.
Assuming that i have 10 clean records in my source database and i need to load all the 10 recs into my target table.
IS there any means of cross checking the no of rows from source table and number of rows loaded into my target table.
Any suggestions are greatly appreciated.
Thanks & Regards.
Hi:
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
Hello all,
I got a text file with two columns. and I need to generate a integer key automatically with the row number (or any distinct number, I thought row number will be OK). and when I make the data flow task to import this text file into a raw file I need to get the unique rownumber as Id.
How can I make this in the data flow tak??
regards,
I written a SSIS package to import a table from one database to another database. I used dataflow task with oledb source and oledb destination with fastload. For 2 million records its taking 5 min . The same import using DTS I am getting in 2 mins. DTS package is more faster than SSIS package ?. any reasons why SSIS is taking more time?
View 4 Replies View RelatedI want to be able to loop through a view and execute a dataflow task for each record. I would like to pass the value of a column to the dataflow task to be used as a parameter in a data reader.
How can I do this?
Hi,
I am getting data from an external source. External data has a column called "Type". I have a variable in my package which contains the list of types as shown below:
Filtered_type_List = 2,4,8,10,11
If this variable(Filtered_type_List) is blank, then I need all the data from the external source and if it is not blank then I only need the records matching to his list. How can I implement this in DataFlow Task?
Thanks