SSIS Dataflow OLEDB Source Issue With DB2 Connection.
Jun 23, 2006
Hi,
I have problem to extract data from DB2 table using SSIS dataflow task with OLEDB source selecting the data access mode with command. Here is the scenario.(Note:If I select the data access mode as a table then it works fine.)
If I use the data access mode as SQL Command then it is not working. i.e. the flow stays yellow in controlflow nothing happens in dataflow and I noticed the SQL dumper and proc completes. I couldn't find any log to verify the issue including the package execution results.Any of your thoughts will help me to resolve this issue.
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
I have implemented a package to load multiple files to a destination. Since the source was a txt file, i have created as flat file source. However now we are getting files in excel format as well.
Is there anyway the source gets changed dynamically based on the file extension, output of the foreach file enumerator? I can think one solution to have 2 dataflow tasks based on precedence constraining and expression one is for .txt and other one is for .xls.
Hi, I am using SQL Server2005 for SSIS. I want to change the source connection dynamicaly evertime. Let me clear, I have to extract some column from excel to MS-Access. I am using Data Flow Task and able to successfully complete the job. But problem is that, whenever a new file comes , i must have to reconfigure my Excel Source. All the time column in file are same, so no need to worry about mapping but how can my package select a file automatically. I have a directory, suppose "C:dpak". I should able to pick the filename and sheet name from this directory every time when my package will execute.
I have implemented a custom source component that can be used as the data source in the Data Flow task.
I have also created a custom UI for this component by using the IDtsComponentUI .
But my component does not have the capability of setting the custom properties via the DTS Variables using the Expression Builder.
I have looked around for samples on how to do this, but I can only find samples of how to do this for custom Control Tasks, i.e. IDtsTaskUI.
My question is, How can implement the Expression Builder in my custom Source component + custom Source UI. Or do you know of any samples which I can look at.
[One day I will come back here and answer questions, rather than only ask.]
I have a custom connection manager that returns an OleDbConnection. The only thing "custom" about the connection manager is how it determines its connection string. The object returned in AcquireConnection is an OleDbConnection.
OleDbConnection oleDbConnection = new OleDbConnection(this.connectionString); oleDbConnection.Open();
return oleDbConnection; }
Some of the objects within SSIS only work with an OleDbConnection, but mine is not recognized as such. Is there any way to have my connection recognized as a valid connection?
Passing a date parameter in a stored procedure through OLEDB Source (Data flow task). We have a multipurpose stored proc in which one of the many expected parameter is a date. It keeps giving me the following error:Description: "Operand type clash: int is incompatible with date"- although there is no integer.
One way to fix it would be change the data type from date to datetime in proc but I can't do that since it is multi-purpose proc. I didn't find anything good on the net.
I'm trying to get data from AS400. using OLEDB source as my connection. i'm using IBM OLEDB provider for iSeries. and working on standard edition of SQL Server 2005.
While using OLEDB source task when i set my access mode to 'table or view' and try to see list of available libraryname.tablenames, i do not get and tables
where as when i use Data access mode as 'SQL Command' i can get data (can only see preview of data) from AS400 but not able to insert that into my destination table. At run time task Fails with the error mentioned below.
I have configured Data links tab inside the OLEDB connection manager also, but when tried to set a default library it gives me error. : "Error code :CWBZZ5042" - ( catalog is invalid ) but it does exist.
Is there some settings that needs to be done from AS400 side or SQL Server side to view the available libray and its tables ?
Can some one help me on the same.
thanks in advance
Shah
Error Message received when executed with SQL command:
Error: 0xC0202009 at Data Flow Task, OLE DB Source [1]: An OLE DB error has occurred. Error code: 0x80040E00.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.Â
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
I am try to transfer some tables data from one database server into another database server. I create a package in SSIS, and I use a variable to pass each table name. In Data flow, I use a OLEDB Source, but I cannot set the Data access mode to Table name or view name variable. Ever time, I will get this following error info "===================================
Error at Data Flow Task [OLE DB Source [31]]: A destination table name has not been provided.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData() at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata() at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)".
Some one can tell me what is the reason, or give me some examples.
Hi, I am trying to Create an OLEDB Connection from SSIS to Inforrmix without any success. Would someone be able to help.We are running Informix version 9.4. We were able to create an OLEDB connection with SQL server 2000 and DTS. But, when trying to create an OLEDB connection using SQL server 2005 and SSIS, I am getting an error message. The connection is created successfully but cannot access databases and tables on informix. The error message when trying to load the Informix tables: 'Could not retrieve table information for the connection manager .... 'Ifxoledbc.e' failed with no error message available '
howdy, i have a sqlserver2005 ssis package which connects to a mysql webserver to upload data. i am connecting via mysql oledb connection and am able to test connect ok through the oledb connection manager. However in my ole db destination editor i get an 0x80040E21 error when trying to preview a table . The full error is :
Error at Data Flow Task [Destination - Query [70]]: An OLE DB error has occurred. Error code: 0x80040E21.
Error at Data Flow Task [Destination - Query [70]]: Opening a rowset for "INFORMATION_SCHEMA.address_book" failed. Check that the object exists in the database. ------------------------------ ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
I can see all the tables in the drop down box in connection manager. This has been driving me nuts for the last 3 days! I have tried changing some of the security connection settings to no avail, (although i am not sure on what these do).I have also tried setting up as an odbc connection using script components but had memory errors after copying several hundred records and the package just hangs. I can go into this in more detail however i dont think they are related issues and i would prefer oledb as i dont have to script my data transfer.
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
I am getting the following error when trying to EDIT a OLEDB Connection Manager. I am using VS2010. Im not coming up with any answers to this problem. I just reinstalled SQL SERVER CLIENT TOOLS 2012 That includes the SQL DATA TOOLS/VS 2010 But I still receive this error.
Error:Unable to find the requested .Net Framework Data Provider. It may not be installed. (System.Data)
After I had transfered SSIS package to another PC I tried to open package and I got an error. ".. Failed to decrypt protected XML node "PackagePassword" with error . ". It turned out, that the password wasn't saved in a OLEDB connection manager of the Package. However "save password" options checked! But password field was empty.
As soos as I enter password the package executes successfully.
Question: How can I transfer a password for OLEDB Connection within a SSIS package to another developer's VS2005?
I am trying to dynamically change my initial catalog in a SSIS project. Each day I get a snapshot of data from the production server. I am performing ETL on that database and loading it into my warehouse. I am trying to put something together so that each day I get the latest snapshot and if its newer then my most recent one I pass that new catalog into the connection manager. I can already run the sql script to compare the two catalogs but I can't populate the connection manager.
Hi, I m totally new in SSIS Programming. I want to transfer ABC.mdb table to my oit_imp_temp table. Can you send me refrence with (above requiments) code that wroks for u ! thanks a lot !
Hi, I m totally new in SSIS Programming. I want to transfer ABC.mdb table to my oit_imp_temp table. Can you send me refrence with (above requiments) code that wroks for u ! thanks a lot !
I was wondering what has worked for all of you in regards to using a sproc as a source within a dataflow. I have had limited success doing this, but maybe there is a workaround I'm unaware of. Basically, using a SQL command in an OLE DB Source, I run an EXEC statement that returns a resultset from a stored procedure. I've noticed that depending on how the sproc is structured, I will either get metadata info in the columns tab of the OLE DB Source or not. Without this metadata of course I can not link it with a destination, since the destination believes that no data is being returned, even if this is not the case. This all seems to depend on the "final" select statement in the sproc being at the very top of the sproc. If it is not at the top, the columns tab will not be populated. Has anyone else had similar issues? Is there a workaround other than populating a temp table outside of the dataflow?
Has anyone in here had luck using AD as a datasource? Big picture, we have an input file with unique identifiers (employee clock numbers) and I need to associate a clock number with an email address. The only place we have those two together is in Active Directory.
Currently, we have a lookup task with an OLE DB connection to our AD and a query that looks like
Code Snippet SELECT mail, clockNumber FROM 'LDAP://DC=company,DC=com'
I've mapped my input to the clockNumber in AD and all is well and good. I then go to thinking, perhaps it'd be better if I used that query as a source in an OLE DB component and used a Merge Join to make the link between the two. I paste that same query into a source component and boom
Code Snippet TITLE: Microsoft Visual Studio ------------------------------ Error at Create extracts [OLE DB Source [1226]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x00000000.
------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
Is this just not something that a person can do or is there something I've set up incorrectly? I'd be lucky to be considered a novice with AD so I'm fine if someone has a better suggestion for retrieving this data, this was just something I'd cobbled together out of some forum postings.
I changed one data source settings in my SSIS project to use Windows Authentication instead of SQL Authentication. This data source is used to create connection managers in all SSIS packages. Soon after the data source was changed, when I opened any package using the connection manager that is based on this changed data source, I got an alert message box like the one given below showing different connection strings in data source and package connection manager. That's understandable (why can't VS 2005 do this silently or give an option to let this happen silently? that would be nice.).
Here is the problem. Even after both data source and connection manager are synchronized, still the same message box keeps on coming when ever I open any affected package (about 20 packages!). It is very annoying as you can see that old and new connection strings ARE IDENTICAL, still VS 2005 is not able to recognize this. I installed VS2005 SP1 even before I ran into this problem. I asked my friends to open this project and check the behavior on his machine. Same thing. Is this a known bug? How to fix this problem? Thanks for your help.
=====
Message box "Synchronize Connection Strings" (VS 2005 status bar shows "Performing post package load operations"):
This package contains at least one connection which is based on a datasource. The connection string for conenctions and data sources listed below are currently not identical. Connection strings of connections will be updated to reflect those on the datasource.
Connection: SqlServer.NET.HBI_DW.hbiuser
Data source: SqlServer.NET.HBI_DW.hbiuser
Old Connection String: Data Source=SDAL1060DB;Initial Catalog=HBI_DW;Integrated Security=True;
New Connection String: Data Source=SDAL1060DB;Initial Catalog=HBI_DW;Integrated Security=True;
Hi, I want to create pckg with two data source, the pckg will know to take data from the right DS after IF will check if getdate() returned endweekday it will take from DS1 else DS2.
I have to import dBASE files to SQL Server. For this I have created one ODBC connection manager for those dBASE files. This I have to set for DataReader Source. But I am unable to configure the DataReader Source.
So, Please tell me how to configure DataReader Source for ODBC connection Manager.
Eagerly waiting for your valuable reply............
I am trying to use an XML Source on xml data from an XML webservice, I am putting the document into a variable the trying to import the data from there with the XML Source, but I am getting an error telling me that truncation occured
The Error is "[XML Source [1]] Error: The "component "XML Source" (1)" failed because truncation occurred, and the truncation row disposition on "output column "linking" (1579)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component."
The linking column mensioned in the error is sometime quite a long string but there is nowhere in the XML Source editor to change the size.
I need to extract data from tables in a database that I can only access via ODBC.
I have successfully created a connection in Connection Manager (ConnectionManagerType = ODBC) for this database.
However I€™m unable to add this connection as a Data Flow Source. There is no ODBC Source option in the Toolbox.
This is a major because we have been using the system dsn Microsoft Visual Foxpro Driver to access free table directory .dbf files under ODBC with DTS for years. To install a new Microsoft OLEDB driver for foxpro is out of the question on a production system as it would cost many thousands of dollars to go through our BAT testing process
How do I extract data from tables in a database via ODBC?
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error. Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
I am running an MDX query in SSIS but I don't know what is the best way of doing this, performance wise. I know I can run the MDX query through an openquery in the OLEDB, and also run it through a Datareader, no openquery needed.
I know the datareader is slower in a normal basis due to .Net, but in this case the OLEDB is running an open query to a linked server which won't be fast like running a regular SQL.
If anyone knows which of this two run faster in this scenario I'll appretiate if you let me know.
