Greetings my friends!
Probably a silly question but I was wondering if there is an automatic feature which would straighten connection lines?
I haven't been using SSIS for long so I am learning the various features by rewriting some of my old DTS packages but it's taking a while to get my connection lines aligned etc..
Thanks in advance.
When I try to open the designer (with exiting, e.g. tutorial or new project/package) I get the following error message:
Microsoft Visual Studio is unable to load this document:
Index (zero based) must be greater than or equal to zero and less than the size of the argument list
I reinstalled (repair) - still not usable - I saw another post with this issue and the only recommendation was reformat and reinstall - seems drastic, looking for a less intrusive solution
thanks
Richard
hi all,
i have a package; thats executing another 4 packages, i can able to execute these packages in ASP.net
I want to display the status notification of the executing packages in the webpage( while packages are being executed, i want to display which package is executing, and what is the status of the package! whether it is executing or not? or it is raising any errors?) every thing i want to give in the front end--> its not my requirement, my client ask me to do that!
so please help me! how to display these status information of the running package in asp.net (c#)
(i'll give you one good chocolate if you give me good solution!)
post your mails to vivekanandaraj.natarajan@honeywell.com Thanks you a lot!
I would like to display a portion of report where there is data or no data
There is data subreport display
Product Name Latex Gloves
Product ID
xxxx5678
There NO data in the subReport
Product Name
Product ID
I have a table with the following structure and data
SampleTable
id name parent_id
1 Microsoft 0
2 Visual Studio 1
3 J++ 2
4 VB 2
5 C++ 2
As you can see, a record with parent_id=0 is the top level. Other levels will have a parent. I want to display the above data as below
1 Microsoft
2 Microsoft - Visual Studio
3 Microsoft - Visual Studio - J++
4 Microsoft - Visual Studio - VB
5 Microsoft - Visual Studio - C++
I tried many times with the select statement but with no luck. Do you have any ideas? Thanks,
i have a column name "Principle" and the data in this column is a dollar value. How do i write a query where when the dollar amount is <0 it displays as - and when its >0, it displays as +
View 1 Replies View RelatedHi,
I created a Time Dimension and ended up with the following (as shown in the attached image). The problem is that when I go to the Day level, I see numbers e.g. 1, 2, ..., 31. Instead I want to display the Weekday Name e.g. Monday, Tueday and so on (i.e. what we get with the datename(dw,<date>) function. Right?)
However I am not sure what to change and where in order to get the desired results. Can someone kindly guide me.
Thanks.
Hi,
I need to show the value of a variable with comma seperated.
For eg: I have a variable N whose value is 123456.89
I need to display it as 1,23,456.89
How i can i display this...
Please help me
Thanks in advance
Hi,
I have the following stored procedure
CREATE PROCEDURE dbo.test(
@number varchar(128) output
)
as
select @number = * from fix_lvts..fix_exec_reports
where gw_instance like '%PORTWARE%'
return 0
Then I go in and execute it like this:
declare @number varchar(128)
exec dbo.test @number output
select @number
I get the following result:
T_PORTWARE_GBL
(Only one row returns).
However when I execute the sql statement below:
select gw_instance from fix_lvts..fix_exec_reports
where gw_instance like '%PORTWARE%'
which is the same one as in the stored procedure except the variable declaration it reurns me the following:
gw_instance
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
(99028 rows of data)
Why is this hapenning?
Can anyone help me?
Thanks and Regards,
Sudip
Hi,
My table "Branch" contain a Field name as MassMail
it contains mail IDs a@yahoo.com;b@yahoo.com;c@yahoo.com;d@yahoo.com;e@yahoo.com
Now plz write me what is the SQL Statement for Retiveing MassMail
except one or Two Mail ID
Example : Retrive
a@yahoo.com;b@yahoo.com;d@yahoo.com;e@yahoo.com
Here c@yahoo.com is not Include
Thanks
Thanks
Hi,
I have the following stored procedure
CREATE PROCEDURE dbo.test(
@number varchar(128) output
)
as
select @number = gw_instance from fix_lvts..fix_exec_reports
where gw_instance like '%PORTWARE%'
return 0
Then I go in and execute it like this:
declare @number varchar(128)
exec dbo.test @number output
select @number
I get the following result:
T_PORTWARE_GBL
(Only one row returns).
However when I execute the sql statement below:
select gw_instance from fix_lvts..fix_exec_reports
where gw_instance like '%PORTWARE%'
which is the same one as in the stored procedure except the variable declaration it reurns me the following:
gw_instance
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
T_PORTWARE_GBL
(99028 rows of data)
Why is this hapenning?
Can anyone help me?
Thanks and Regards,
Sudip
I want to display the number of records for each state in a database. I'm using a strongly types dataset. In my method, I have the followingSELECT COUNT(ID) AS iTotal, STATEFROM membersWHERE (Suspend = 0)GROUP BY STATEORDER BY STATEIn the code behind of my page I have Dim mateAdapter As New WAPTableAdapters.membersTableAdapter Dim mates As WAP.membersDataTable Dim mate As WAP.membersRow mates = mateAdapter.GetDataState For Each mate In mates Select Case mate.STATE Case "AK" LabelAK.Text = mate.ID. End Select Next What should LabelAK.Text = mate.ID. be for me to be able to display the number of records that have 'AK' in the state field?Diane
View 7 Replies View Related Hai, My condition of the program is to check whether the username is available or not. If it is available, I should insert that username into the db, if not I should display "Username already exists". I've written SP for the condition, but I dunno how to display the error message in asp.net. I've my codings below: DB - SP:alter procedure insert_user@username varchar(20)asif exists(select username from test where username=@username)print 'Username already exists'elseinsert into test(username) values(@username) Default.aspx.cs: protected void Button1_Click(object sender, EventArgs e)
{
SqlConnection insertconn = new SqlConnection("Server=achuthakrishnan;Initial Catalog=classifieds;Integrated Security=SSPI");
SqlCommand insertcmd = new SqlCommand("insert_user", insertconn);
insertconn.Open();
insertcmd.CommandType = CommandType.StoredProcedure;
insertcmd.Parameters.AddWithValue("username",TextBox1.Text);
SqlDataReader dr;
dr=cmd.ExecuteReader();
insertconn.close();
} What is the condition I should check after SqlDataReader dr? Or else, I believe I should use @@error to display error messages in asp.net. I googled a lot and couldn't find the exact solution. Can any one help me?
I am JOINing a Table with a View, and the View can have multiple rows relating to the join condition(i.e. My view as 4 columns, and can look like the following:
A B C D
A E F G
B H I J
I want this to look like -
A B C D E F G
B H I J
I want one row, but not one column, I need to maintain each value in its own column, withinin a single row.
Doesn't matter to me if that transition happens in my View or as the outcome of my Join.
I've been looking at the PIVOT command, but that appears to only work with an aggrgrate function. I don't want to calculate/aggreagte anything, just combine my multiple rows in one.
This is my VIEW stmt -
SELECT [PKG ID] AS PKG_ID, [APPR GRP NAME], [USRID OF APPR], [APPR STATUS]FROM dbo.pkgapproversWHERE ([APPR STATUS] = 'approved') AND ([APPR GRP TYPE] = 'E')
This is my Join stmt - set @sql = N'SELECT DISTINCT [PKG ID] AS PKG_ID, [ELM ACT] AS Action, [END EXEC DATE] AS "Exec Date", [COMMENT] AS Comment, [USRID OF APPR]
FROM [PkgAction]
FULL JOIN vw_PkgApprovals
ON PkgAction.[PKG ID] = vw_PkgApprovals.[PKG_ID]
WHERE 1=1'
Any thoughts....Thanks
I'm trying to follow along with lesson07 Web Development Express series and when I drag the SqlDataSource tool onto my form I do not see the object on the screen. I therefore can not configure it until I have placed GridView object onto my form. I hope you can help me in how to view the SqlDataSource or inform me where I can get further information
View 2 Replies View RelatedI want to publish Images in an asp-web-page. How can I do that?
View 1 Replies View RelatedHi,
When I execute a script by using isql, it displays the number of statement executed. can anybody tell me how to turn this off (no display)?
Thanks,
Mark
I want to know how to display only each of it where in my database for example the ProductItem got a lot of value of '1000' in it. i only want it to display once.
ProductItem | Name
1000 | ABC
1000 | DEF
1000 | HIJ
2000 | KLM
3000 | NOP
I want in my dropdownlistbox only display 1000, 2000, 3000.
I using the 'Select ProductItem from Product' for sure it will display 1000,1000,1000,2000,3000. So to filter it.
Thanks
Hello. I've been searching for a couple of hours online and can't quite seem to find what I'm looking for. I've found plenty of database administration programs, but that's not what I need.
I'm looking for a program (or online service or whatever) that has the ability to basically take any database I choose and display the information within on a web page in which others can access. Such as, if my company wants to take on a few other company's databases and have them log in to our server through the web to display information from their (and only their) database dynamically on the web, then this program allows me to set all of that up. Information could be formatted in tables, charts, etc., whatever the program is capable of. Is there such a thing and where can I find more information?
Thanks for everyone's help. :-)
Just a straight forward question: In the SQL SVR 2000 Northwind database, how do I display the top 5 salesman? I would like to display the salesmen and the total amount of their sales to date. I have this as a starting point:
SELECT Employees.Country, Employees.LastName, Employees.FirstName, Orders.ShippedDate, Orders.OrderID, "Order Subtotals".Subtotal AS SaleAmount
FROM Employees INNER JOIN
(Orders INNER JOIN "Order Subtotals" ON Orders.OrderID = "Order Subtotals".OrderID)
ON Employees.EmployeeID = Orders.EmployeeID
WHERE Orders.ShippedDate Between '19970101' And '20051231'
It displays all the sales between the dates, I just need to work something that will total up the sales for each employee then list the top 5.
Thanx
Hello, everyone:
By default, SQL Server display "NULL" if there is no data value. How to display blank instead of "NULL"? Thanks a lot.
ZYT
Hello, everyone:
I have attached a new database from customer, and wanted to check the existing relationships. How to display these relationships? Thanks.
ZYT
Hi Guys,
How do I display an item in a day? This is a featured product of the day. This will change everyday. I can do this in classic ASP but not in stored procedure.
Table:
This is just to give you an idea of the table
ID | ProductName | DatePosted
----------------------------------------
1 | item1 | 5/1/2008
2 | item2 | 1/2/2008
3 | item3 | 6/2/2007
and so on...
Can someone please help me?
Thanks in advanced.
This my procedure
DECLARE @Months table
(MonthName varchar(20)
)
INSERT INTO @Months
SELECT 'Jan' UNION ALL SELECT 'Feb' UNION ALL SELECT 'Mar' UNION ALL SELECT 'Apr' UNION ALL
SELECT 'May' UNION ALL SELECT 'Jun' UNION ALL SELECT 'Jul' UNION ALL SELECT 'Aug' UNION ALL
SELECT 'Sep' UNION ALL SELECT 'Oct' UNION ALL SELECT 'Nov' UNION ALL SELECT 'Dec'
SELECT m.MonthName,ISNULL(CallOutCharge,0) As 'CallOutCharge'
FROM @Months m
LEFT JOIN (SELECT Sum(FT.CallOutCharge) AS 'CallOutCharge', Convert(CHAR(3), CC.CompletedDate,109) As 'Month', month(CC.CompletedDate) As 'intMonth', Year(CC.CompletedDate) As 'Year' FROM HSSPMS_Tbl_Callcentre_Compliants AS CC
INNER JOIN HSSPMS_Tbl_LandLordFulltimeEmployee AS FT ON FT.ContractorCode = CC.ContractorCode And CC.FaultCleared='1'
WHERE FT.CreatedBy=@OwnerId AND FT.IsDelete='0' And Year(CC.CompletedDate)=@Year Group BY CC.CompletedDate)t
ON t.month=m.MonthName
This my Result
MonthName CallOutCharge intMonth
-------------------- ------------- -----------
Jan 0 NULL
Feb 0 NULL
Mar 0 NULL
Apr 0 NULL
May 767 5
Jun 0 NULL
Jul 0 NULL
Aug 0 NULL
Sep 0 NULL
Oct 0 NULL
Nov 0 NULL
Dec 0 NULL
But i need to display
MonthName CallOutCharge intMonth
-------------------- ------------- -----------
Jan 0 1
Feb 0 2
Mar 0 3
Apr 0 4
May 767 5
Jun 0 6
Jul 0 7
Aug 0 8
Sep 0 9
Oct 0 10
Nov 0 11
Dec 0 12
Any one help me
Regards,
Prabu R
I have a temp table that I would like to only display the Qty of 4 one time
The total Qty is 4
Part Fac Loc Lot Qty
===== === === === ===
8793 07 FG 111 4
8793 07 FG 122 4
8793 07 FG 113 4
8793 07 FG 144 4
I want to display Qty 4 so when I do a sum I do not get qTY 16
Part Fac Loc Lot Qty
===== === === === ===
8793 07 FG 111 4
8793 07 FG 122 0
8793 07 FG 113 0
8793 07 FG 144 0
I have the following code
<html>
<head>
<title>Eye Contact - Century to Century</title>
<link rel="stylesheet" href="eye01.css" type="text/css" />
</head>
<body>
<form name ="" method = "post" action="">
<table width="100%" border="1" height ="85%">
<tr height = "15%">
<th>Date</th>
<th>Year Left</th>
<th>City Origin</th>
<th>Country Origin</th>
<th>Year Arrived</th>
<th>City Arrived</th>
<th>State Arrived</th>
<th>Filename</th></tr>
<?php
$db = mysql_connect("localhost","root","");
if (!$db)
{
print "error - Could not connect to MySQL";
exit;
}
$er = mysql_select_db("touch_art1");
if(!$er)
{
print "error - Could not select the database";
exit;
}
extract($_POST);
$query = "SELECT date, yr_left, city_origin, country_origin, yr_arrival, city_arrival, state_arrival, filename FROM story WHERE country_origin = '$search_country' AND pamapproved = 'Y' ORDER BY yr_left";
$result = mysql_query($query);
if($result)
{
while($column = mysql_fetch_object($result))
{
print "<tr align ='center'>";
foreach($column as $colval)
{
print "<td>$colval</td>";
}
print "</tr>";
}
}
else
{
print "Error on Query";
exit;
}
mysql_free_result($result);
mysql_close();
?>
<input type="hidden" name="" value="none">
</table><table height = "15%" width = "100%" border = "0">
<tr height="100%">
<td align="left" valign="top" width="50%" >
<embed src="images/home.svg" width="100%" height="100%" wmode="transparent" type="image/svg+xml" />
</td>
<td align="right" valign="top" width="50%" >
<embed src="images/back.svg" width="100%" height="100%" wmode="transparent" type="image/svg+xml" />
</td>
</tr>
</table>
</form>
</body>
</html>
I need to display the date as in MM-DD-YYYY. Can anyone help?
How would I display just the date in the dataset if I have the data with date and time like this 2007-05-02 07:14:48.000
I want to truncate/or something to the time and just display the date. How would I change my query.
SELECT usr_end_date,date_exp,usr_last_name, usr_first_name, usr_login,employeeid, displayname
FROM [OIM_FIX].[dbo].[OIM_USR] a, CORP_EMP_IDs b
WHERE USR_login = CAST(b.employeeid AS varchar)and
usr_end_date <> date_exp
currently it is returning the full date and time like this
2007-05-02 07:14:48.000
I want just the date like this 2007-05-02
I am using sql server 2005
Thanks,
Maachie
I have a table in SQL Server 2000 with have date/time columns anddisplays the dates as : 1900-01-01 00:00:00.000 which is fine, but whenI select the column through dreamweaver for an asp page to date isshortened to 1900-01-01 but I need to see the whole date / time fieldfor conversion purposes.Can anyone help ?Thanks in advance.
View 2 Replies View RelatedHello,I would like to query the top 5 best companies' sales (total sales),then total the rest, what is the quickest and effective SQL to queryit?Thanks in advance
View 8 Replies View RelatedHiI need to produce an excel output from SQL that showsemail - company name - producttype1, producttype2 (where the - denotesa change in column)basically i have a table the first line is the fields and the secondand third are the entriesemail - companyname - producttypeJoin Bytes! - xx - Product1Join Bytes! - xx - Product2
Quote:
Hi, I have a table that I insert a member's country into every timesomeone signs up. What I'd like to do is pull information from the DBsuch that I can see each country and the number of users from each.For example:Argentina 10Brazil 5Canada 3I'm having trouble writing the SQL for this...any suggestions?Thanks,Erik
View 2 Replies View RelatedHi,
i got one problem. I want to show my username in pageHeader.when i drag and drop my value from dataset to pageheader its giving some error.
in Body its working.but i want show only in page header that username.
can any body help me.
kiran
hello forum friends,
i need to display the database table in ASP
page.how it is possible,can anyone explain me
with code.
Regards
Prathap