SSIS Error
Mar 30, 2007
I have created a package that insert data from Iseries table to SQL 2005 database.
I am using Microsoft OLE DB provider for DB2 and Native OLEDB for SQL2005 database as connector.
I am getting following errors:
[OLE DB Source [1]] Error: There was an error with output column "ACCOUNTID" (32) on output "OLE DB Source Output" (11). The column status returned was: "The value could not be converted because of a potential loss of data.".
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "ACCOUNTID" (32)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "ACCOUNTID" (32)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Thanks,
Biju Varughese
View 27 Replies
ADVERTISEMENT
Aug 1, 2006
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
View 21 Replies
View Related
Feb 29, 2008
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
View 10 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
May 20, 2008
Hello,
I recently joined a company that is having an issue connecting to SQL Server Integration Services on one of their production servers. When trying to connect via management studio, both locally and remotely, they receive the error below. The server is a 64 bit server and is using third party replication (Veritas).
It sort of sounds like the issue described in this knowledge base article: http://support.microsoft.com/kb/919224. However, we do not have a problem creating maintenance plans. I'd just give it a shot but its a production server and getting approval to do anything that modifies the registry with the registry replication setup is a pain, so I'd like to determine if there could be another cause first.
TITLE: Connect to Server
------------------------------
Cannot connect to ***************.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
Nov 21, 2007
I click on menu item SSIS and enable logging to my SQL Database (SSIS log provider for SQL Server). When I run the package it runs fine for the first time. Upon subsequent runs I get the following error.
[Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "There is already an object named 'sysdtslog90' in the database.".
It seems like I need to drop the table every time to avoid this error. Is there a way I can log all package logs to single table historically? Any weblink or tip is appreciated.
Thanks!
Palak Mody
View 3 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Jun 13, 2008
created one transform task.. while execute received error
column1 and column2 cannot convert between unicode and non unicode string data type.
View 1 Replies
View Related
Feb 22, 2008
hi,
iam fairly new at running ssis packages.i have created a ssis package in sql server business intelligence dev. studio.
iam running a simple package of file system task where ontents of one file are bieng copied to another on the same machine.
the package runs successfully when i run it manually.but when i run it as a job it dosent run i checked the log and got this message
Executed as user: LEGALsvc-leglngdaysql002. ...42.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:52:00 AM Error: 2008-02-22 02:52:01.22 Code: 0xC0011007 Source: {83F3BF45-5E11-4164-835F-DDB92207603B} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2008-02-22 02:52:01.22 Code: 0xC0011002 Source: {83F3BF45-5E11-4164-835F-DDB92207603B} Description: Failed to open package file "D:Documents and Settingskumarr1My DocumentsVisual Studio 2005ProjectsIntegration Services Project5Integration Services Project5Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specifi... The package could not be f... The step failed.
can anyone tell me what it means and what i have to do to resolve this error.
all help is aprreciated.
View 20 Replies
View Related
Dec 2, 2005
I execute my package to transfer a full database SQL 2000 to SQL 2005, and the transfer fails with this error:
View 20 Replies
View Related
Aug 31, 2007
All,
i have written an ssis package that is designed to do the following:
1. load a list of servers from a management sql server table
2. store this into an ADO recordset
3. hand the ADO recordset off to a child package that in turn will
4. dymanically grab servernames and execute a WMI task to query the win23_logicaldisk table and store this in a dataset
5. dataset is handed to a for each loop and a data insert is made back to a management server table
The reason for the Child package is that it was one of the suggestions that I found on forum discussions to resolve the problem that I am still facing. I am recieving an error of "RPC server not available" when dymanically assign the servername to the connection string property of the WMI connection using an expression.
Error: 0xC002F304 at WMI Data Reader Task, WMI Data Reader Task: An error occurred with the following error message: "The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)".
I have researched this extensively and have verified that connectivity and communications are open, the rpc, rpc locator and wmi services are running. I even receive this meessage when executing this code against my local machine that is running the ssis package!
Any insight would be greatly appreciated in resolving this.
Thanks,
Steve
View 2 Replies
View Related
Jan 28, 2008
I encountered these errors after running the SSIS package. A command line triggers a batch file in a batch server that runs the package in a seperate server. Kindly assist me on this.
Code: 0xC0202009
Source: <Package name> Connection manager "<server path>"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
End Error
Error:
Code: 0xC00291EC
Source: On Error Execute SQL Task
Description: Failed to acquire connection "<server path>".Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning:
Code: 0x80019002
Source: OnError
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
View 3 Replies
View Related
Aug 2, 2007
Hi,
I'm getting the following error while loading data from flat file to SQL server tables.I'm using OLE Db destination. Can anyone tell me what might be the reason?
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
View 2 Replies
View Related
Nov 9, 2005
I encounter a serious problem when I execute dtsx package in 64bit SQL2005. I try to run dtexec command together with the file name , and its return error below: €œFailed to decrypt protected XML note €œDTS:Password€? with error 0x8009000B€? Key not valid for use in specified stateI found the problem is cause by SQL2005 Proctection level in SSIS, then i use dtutil to encrypt the password, but i still cannot run the DTS in 64bit SQL2005
View 2 Replies
View Related
Mar 17, 2006
Hi All,
We are using IBM iseries OLE DB provider and once we make a source connection using the same we get an error saying that the "Default Code Page" property is not defined and a default code page will be used.
Any ideas?
Thanks
Manish
View 5 Replies
View Related
Aug 21, 2007
Hi,
I have hourly job running which I inherited from developers. I get this errors in the job. I can't figure out what's wrong and why it's failing.
I can't troubleshoot it either because I do not have exact dev enviornment to reproduce the problem. error is attached.
Please advise
=================
Executed as user: USsqldbagent. ...Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:06:02 AM Error: 2007-08-21 10:06:03.30 Code: 0xC020837F Source: Fill Update Table with new data DataReader Source [1] Description: The data type of "output column "AvailabilityBy" (1885)" does not match the data type "System.String" of the source column "AvailabilityBy". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004706B Source: Fill Update Table with new data DTS.Pipeline Description: "component "DataReader Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004700C Source: Fill Update Table with new data DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-08-21 10:06:03.30 Code: 0xC0024107 Source: Fill Update Table with new data Description:. The step failed.
===========
I can run the job for testing. I can't really change anything on server to test this other than database.
Thanks a lot in advance
View 5 Replies
View Related
Feb 11, 2008
Hi Guys,
1) I have data coming in from flat file everyday.On failure I would require Error Table to be updated with problematic rows.Otherwise rows would be updated to a Staging Table.Problem is I have been asked to also return the row number for the problematic rows, so that it's easier for the Client to resend failed rows.How do I do this ?
2) I have realize that even if row coming in has some invalid data type in more than 1 column.ErrorColumn, in Error table just return 1 column value.Is this how it works? OR is there a way for it to return the Error_Column for the other Column's as well.
I have been struggling with this since last week.Do help me out.
View 8 Replies
View Related
Feb 22, 2008
All, I am new to SSIS package. I need to know how to handle the errors in SSIS work flow. Can you please provide any specific procedure or method to handle the error. Basically, i wanted to trap the failed records and alert through email... I would be pleased if any one could answer for this..
View 4 Replies
View Related
Sep 21, 2006
I have written a stored procedure that accepts 33 parameters. I am trying to execute the stored procedure from a SSIS OLE DB Command task. The code I am putting into the "SqlCommand" property is "Exec dbo.CO_PROD_UPDATE ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?
View 6 Replies
View Related
Apr 24, 2008
Hi,
I have a package which stores the data from Excel to SQL database. Excel file contains 2 records in which one is good record and other one is bad record. I would like to transfer the bad record to sql 2005 error table.
How should i accomplish this and what are the steps to be followed for successful package implementation.
Its Urgent....
ThanksRamesh.R
View 1 Replies
View Related
Nov 7, 2007
Hi all,
I'm having an issue with transactions in SSIS.
I have a Sequence Container, that contains 5 Tasks.
1) Data Flow Task using an OLEDB Connection to access an Oracle RDB database via a linked server. then insert into SQL Server 2005.
2) Execute Sql Task on Sql Server 2005 (UPDATE Statement)
3) Execute Sql Task on Sql Server 2005 (DELETE Statement)
4) Data Flow Task using an OLEDB Connection to insert data into a SQL Server 2005 DB
5) Execute Sql Task performing an UPDATE statement on an Oracle RDB database using an OLEDB Connection to to access the database via a linked server
If the Sequence container and all contained tasks are set to Transaction: Supported (No transaction will be created I believe), then the package runs successfully.
If I change the Sequence container to Transaction: Required, and leave all contained tasks as Transaction: Supported, then Task 1 fails with the following error:
[SELECT From RDB Change Table [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SSISPOC" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Any Ideas would be much appreciated, as I'm stumped!
View 3 Replies
View Related
Jul 12, 2006
I have an input text file on my local box and the SSIS package runs there. I am reading the first 24 characters of each row and populating a single-column table on a remote sql 2005 server.
Her'es the werror message I get:
"Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened.
Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server
via Windows security.".
I certainly do have Windows access to the remove server as well as the local server. (and I test out all my SSIS connections before using them). Can anyone clarify the meaning of this message?
TIA,
Barkingdog
P.S. Sql 2005 is running as a named instance on the remote box.
View 7 Replies
View Related
Feb 26, 2008
I am trying to run an update statement. Both these tbls were migrated from 2000 to 2005.. However the upgrade returnes the foll err.
Cannot resolve the collation conflict between "SQL_Latin1_General_Pref_CP437_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Update statement is as follows:
Update a
Set FIELDNAME='C'
From table1 a
where ACCT in
(select loannum from table2 b where a.ACCT=b.ACCT)
and ACCT is not null
View 1 Replies
View Related
Jun 15, 2006
Hi,
when we are using OLEDB Command we are getting the following error?
when we use sql server as the source its working fine .but its throwing error when we try to connect the orcale database .
Error at Data FLOW TASk[OLE DB Command[3863]]: An OLE DB error has occured :0x80040E51.
An OLE DB record is available. Source : "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51
Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
ERrror at Data Flow Task [OLE DB Command [3863]]: Unable to retrieve destination column description from the Parameter of the SQL Command
Thanks & Regards
Jegan.T
View 4 Replies
View Related
Jan 21, 2008
Hi... hopefully someone can help me out with resolving this error.
We have a set of DTS tasks that have been migrated in SSIS tasks on an existing SQL 2005 server, all is fine there and the tasks run ok.
We now want to deploy a copy of the same tasks to another SQL 2005 server at another organisation, so obviously we'll need to change things like server names and file paths. The tasks update different tables in a SQL database on the same server taking information from flat files. The SSIS dtsx files contain embedded DTS tasks. I've been able to view these successfully using the tools in Visual Studio 2005.
I have created a deployment utility for the SSIS files and installed them on the new server.
When I try and run the first SSIS task on the new server it fails validation with the error "Package name is not specified". Having looked at the task in Visual Studio everything looks ok.
Does anyone know whats going on here and how to resolve it?
Regards
Keith
View 2 Replies
View Related
Jun 26, 2007
I have a package that is failing parsing a CSV file. I want to write the failing line to an error file and continue processing. I've added error output to the flat file source, that didn't work. I've added an onerror event handler to the data flow task, that didn't work. I've added an event handler to the package, that didn't work. How can i output the offending line but not have the process fail?
View 4 Replies
View Related
Jun 1, 2006
I have a simple package that I created. it gets information from an excel file using the excel connection and then imports it into a sql2005 table using the ole db connection. the job runs fine in the BI environment. and it will run fine once I've imported it to the server. However when I go to run it as a job step using the line
dtexec /Ser Name /U User /P xxxxx /SQ "SalesSuccess"
it errors out with the following error.
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
now i've tried a couple of things with the protection level ie
ServerStorage, EncryptSensitiveWithPassword, EncryptSensitiveWithUserKey
and none of these seem to work correctly. I'm at a loss as to what to do and any help would be greatly apprieciated
View 3 Replies
View Related
Aug 8, 2006
I have written an SSIS Package that connects to an Oracle database through SQL Authentication. Whenever I execute the package in BIDS it executes without a problem but when I try to schedule the package as a Job I recieve an AcquireConnection Error. Any help?
I have tried the solutions outlined in http://support.microsoft.com/kb/918760 and have read through the KB but have found few solutions that pertain to connecting to remote Oracle databases through SQL Authentication. Any help would be much appreicated.
View 7 Replies
View Related
Aug 23, 2006
Hi,
we have developed SSIS package in machine1 .when we copy the SSIS solution from Machine1 to Machine2 .when we open the SSIS solution in machine2 we are getting the following errors what could be the reason .help us pls.
1. Error loading Package_test.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. d:jeganssis prjsfuzzyfuzzyPackage_test.dtsx
2.Validation error. Data Flow Task: Fuzzy Grouping [3131]: The AcquireConnection method call to the connection manager "AIGSSPORTAL.Apex1.g360user" failed with error code 0xC0202009. Package_test.dtsx
Thanks
Jegan
View 7 Replies
View Related
Oct 3, 2007
I am designing a SSIS package where i get text file as input. This file contains transaction details.
I have to map the members in each transaction for data integrity. For this i am using Lookup object.
Lookup object works very well upto my expectations but i am facing problem in mapping the error code sent bythe this object whenever a record fails. I am storing all the invalid records into text file.
All the records get stored into text file along with some SQL Server error_code and error_column.
I cant interpret these last two columns as it displays some numeric code and column name.
Is there any way to map these error codes and columns and get relevant information out of it?
Example
error code = -1071607778
error column = 0
Any help is appreciated.
View 1 Replies
View Related
Aug 8, 2007
Hello,'
Anyone can shed some light on what could be causing the error below?
This step import excel from a share using PRODsvcSQLDMS into the DB.
Could there be some setting in SSIS that I need to specify for the excel connection to use permission appropriately?
Thanks,
-Lawrence
OnError,SEA1DMSDB13,PRODsvcSQLDMS,Import Business,{4A36B215-3803-425C-A048-2677EF61FD8E},{41055DC6-9E34-45B9-9B31-152A40EFE837},8/8/2007 3:02:58 PM,8/8/2007 3:02:58 PM,-1071611876,0x,The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
View 12 Replies
View Related
Jan 16, 2006
I have an install of SQL Server 2005 Developer Edition, and the Integration Services Service will not start. If I attempt to start the service via the Services Computer Management screen, the system throws a message that says the service started, then stopped.
If I attempt to start the service via the SQL Server Configuration Manager, I get a "service did not respond in a timely fashion", which is so unfashionable.
Of particular interest is that during the install I did get an error message about WMI security. Looking at the WMI Security tab in WMI Control, I noticed that the key that the setup program was trying to configure did not exist under "ServerEvents".
There is a key named "MSSQLSERVER", but that did not match the key that the setup program was complaining about.
I am not seeing any event log items relating to errors. The system log shows the service startup and service shutdown as information items.
Anyone have any ideas?
View 3 Replies
View Related
