SSIS - Excel Connection Error When Using Config Files
Mar 26, 2008
I have several SSIS packages, some of which retrieve data from excel files - they work fine from th VS designer until I try to store configurations in a SQL database - then I get the following error:
SSIS package "ITAMdiv2.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ITAMdiv2, Connection manager "ExcelDIV2": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [84]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ExcelDIV2" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (84) failed validation and returned error code 0xC020801C.
any ideas?
Thanks in advance@!
Bob
View 1 Replies
ADVERTISEMENT
Nov 13, 2007
I have deployed to production a number of nested packages (parent packages that call child packages) to the SQL msdb via the Save As option rather than building a deployment utility. These packages reference configuration files in a static location off of the c: drive on the production server. In the development environment, when connection changes are made and I run the Reload with Upgrade option the connection manager takes on the new server and user id settings. However, out on the production side I get the following error from the SQL job log:
Cannot load the XML configuration file. The XML configuration file may be malformed or not valid.
As a result the SQL job uses the default connection information which references the development database rather than the production database. I did research the error but found no good solutions. Is there a way to ensure the configuration files are formed correctly and that the packages are correctly referencing the configuration files? We are trying to run the ETL updates via a SQL job.
Any suggestions? Thanks.
T
View 3 Replies
View Related
Dec 17, 2007
Hi
I am developing one SSIS package to migrate an Oracle Database to SQL Server 2005 DB through ODBC. My problem is with configuration. I have to use configuration file so that in production environment the end-user must be able to change the user credentials to connect both database servers. I am trying xml configuration file. When I try to use xml configuration, my odbc connection is giving error. But if I disable the configuration through "Package Configurations Organizer", it works fine. Using an XML Editor I checked the .dtsconfig file and entered both passwords for the both connections.
I tried logging and below are the few text from log file related to error.
Code Block
User:Diagnostic, Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B}, {6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:39 PM,12/17/2007 8:16:39 PM,0,0x,ExternalRequest_pre: The object is ready to make the following external request: 'IDbConnection.Open'.
User:Diagnostic,Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B},{6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:41 PM,12/17/2007 8:16:41 PM,0,0x,ExternalRequest_post: 'IDbConnection.Open failed'. The external request has completed.
I am using Protection level = EncryptSensitiveWithPassword for the package.
Please help me.
Thanks & Regards
Charmis
View 4 Replies
View Related
Jul 2, 2007
in asp usually i have code behind files those .aspx.vb file.can i make use of connection strings in there? i am not really familiar with connection strings. actually shouldn't code behind files "simulate" code being in the .aspx file themselves? i seem to not able to share variables between them?
View 2 Replies
View Related
Jul 12, 2007
I went through other threads and links on this subject. Still one thing which concerns me is the config files.
My current folder path is C:Karunakaranfolder1folder2
Under folder2 I have the following files
4 dtsx files
1 .database file
1 .dtproj file
1 .dtproj.user file
1 .sln file
1 .suo file
Config folder ( C:Karunakaranfolder1folder2Config)
common.dtsConfig
oracle.dtsConfig
Based on some of the threads, when I enabled package configuration, I changed the path from
C:Karunakaranfolder1folder2Configcommon.dtsconfig -> common.dtsconfig
Once I did this, when I open the project I get a dozen of warning similar to the one below
Warning loading <package1>.dtsx: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
What am I doing wrong here? If I have to deploy this to another box, what should I do to ensure that nothing breaks once its copied / installed?
Thanks
View 21 Replies
View Related
Oct 15, 2010
in order to use an SSIS package as a data source in a report, I need to enable the SSIS extension in the RSReprotDesigner.config and RSReportServer.config files. That extension is in neither of these files. I have SSIS running on my machine with Reporting Services.
The path to RSReportServer.config: C:Program FilesMicrosoft SQL ServerMSRS10_50.MSSQLSERVERReporting ServicesReportServer
The path to RSReportDesigner.config: C:Program Files (x86)Microsoft Visual Studio 9.0Common7IDEPrivateAssemblies
Why is this extension not in either of these files?
The following is an abbreviated list of what's present in the RSReportServer.config file:
<Data>
<Extension Name="SQL"
<Extension Name="SQLAZURE"
<Extension Name="SQLPDW"
<Extension Name="OLEDB"
[Code] ....
The following is an abbreviated list of what present in the RSReporDesigner.config file:
<Data>
<Extension Name="SQL"
<Extension Name="SQLAZURE"
<Extension Name="SQLPDW"
<Extension Name="OLEDB"
[Code] ....
I'm running SQL Server 2008 R2
ProductVersion ProductLevel Edition 10.50.1600.1 RTM Enterprise Edition (64-bit)
The operating system is Windows 7 Professional 64 bit.
View 6 Replies
View Related
May 1, 2008
I'm a newbie to SSIS so this question may cause people to point and laugh. I apologise if that's the case.
I have a configuration database that holds connection details to a remote database. I want to use these connection details to dynamically create a new connection to some remote database.
I usually work in with C# where this would be simple but I can't find how to do this using SSIS.
I have found people using configuration files but as I already have my connection data in a table I don't really want to strip it out. (Also, is it a security risk to have database connection strings stored in a config file?)
I have been able to implement a custom script object to build the connection string and assign it to a user variable within the package but can't find any way to then use that variable to connect to the remote database.
Can anyone help?
View 6 Replies
View Related
Feb 12, 2006
hey guys i keep getting this error and I am not sure how to sort it and google just aint working for me tonight.
Exception Details: System.InvalidOperationException: The ConnectionString property has not been initialized.
Line 31: SqlDbType.VarChar, 40))
Line 32: objCmd.Parameters("@IssueName").Value = IssueName.Text
Line 33: objCmd.Connection.Open()
Line 34: ' Test whether the new row can be added and display the
Line 35: ' appropriate message box to the user.
[InvalidOperationException: The ConnectionString property has not been initialized.]
System.Data.SqlClient.SqlConnection.PermissionDemand() +852131
System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) +22
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ASP.newpriority_aspx.submit(Object Source, EventArgs e) in C:Prototypeofficial1htmlewpriority.aspx:33
System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e) +105
System.Web.UI.HtmlControls.HtmlInputButton.RaisePostBackEvent(String eventArgument) +106
System.Web.UI.HtmlControls.HtmlInputButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
the web config con string is like so
<______________>
<?xml version="1.0" encoding="utf-8"?>
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<connectionStrings>
<add name="GeolinkSupportdb" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|ASPNETDB.MDF" />
</connectionStrings>
<system.web>
<authentication mode="Forms" />
<roleManager defaultProvider="SqlProvider"
enabled="true"
cacheRolesInCookie="true"
cookieName=".ASPROLES"
cookieTimeout="30"
cookiePath="/"
cookieRequireSSL="false"
cookieSlidingExpiration="true"
cookieProtection="All" >
<providers>
<add
name="SqlProvider"
type="System.Web.Security.SqlRoleProvider"
connectionStringName="GeolinkSupportdb"
applicationName="SampleApplication" />
</providers>
</roleManager>
<membership defaultProvider="CustomizedProvider">
<providers>
<add name="CustomizedProvider"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="GeolinkSupportdb"
minRequiredPasswordLength="5"
minRequiredNonalphanumericCharacters="0" />
</providers>
</membership>
</system.web>
</configuration>
<------------------------------>
code
<% @Import Namespace="System.Data" %>
<% @Import Namespace = "System.Data.SqlClient" %>
<% @Import Namespace="System.Text" %>
<% @Import Namespace="System.IO" %>
<% @Import Namespace="System.Web.UI.HtmlControls" %>
<script language="VB" runat="server">
Dim strConnection as string = ConfigurationSettings.AppSettings("GeolinkSupportdb")
Dim sqlConn = New SqlConnection(strConnection)
Sub Page_Load(sender as Object, e as EventArgs)
End Sub
Sub submit(Source As Object, e As EventArgs)
'assign the user entered information
Dim objCmd As SqlCommand
'Dim dbIssueName = IssueName.Text
'You must open the connection before populating the DataReader
Dim strSQL1 = "Insert into Support_Issue Values @IssueName"
'SqlConn.Open()
objCmd = New SQLCommand(strSQL1, SqlConn)
objCmd.Parameters.Add(New SqlParameter("@IssueName", _
SqlDbType.VarChar, 40))
objCmd.Parameters("@IssueName").Value = IssueName.Text
objCmd.Connection.Open()
' Test whether the new row can be added and display the
' appropriate message box to the user.
Try
objCmd.ExecuteNonQuery()
Message.InnerHtml = "<b>Record Added</b><br>" & strSQL1
Catch ex As SqlException
If ex.Number = 2627 Then
Message.InnerHtml = "ERROR: A record already exists with " _
& "the same primary key"
Else
Message.InnerHtml = "ERROR: Could not add record, please " _
& "ensure the fields are correctly filled out"
Message.Style("color") = "red"
End If
End Try
objCmd.Connection.Close()
End Sub
</script>
database looks like this
IssueID UniqueIdentifer
IssueName varchar(50)
Any idea on why I cannot get my connection string to work have I missed something or trying to connect to it wrongly?
View 9 Replies
View Related
Jul 2, 2007
Hi
While trying to build SSIS Package Project, the following error is thrown. I have added configuration file recently to fetch the dynamic values such as connection string, output path etc.
I tried manually cleaned up the debug folder and tried build but still the error occurs.
Can any one help in suppressing this error?
Error 1 System.ApplicationException: Could not copy file "D:ExportExport.dtsConfig" to the deployment utility output directory "D:ExportinDebug". ---> System.IO.IOException: The file 'D:ExportinDebugExport.dtsConfig' already exists. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace --- at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow) 0 0
Thanks in advance,
Prabha
View 1 Replies
View Related
Apr 24, 2007
Hello all,
I'm new to SSIS and have a question about the best way to generate multiple Excel files with my current package design. I have a stored procedure that I run from an Execute SQL Task in a foreach loop container, and it generates results as appropriate for each of the parameters it loops through.
What's the best way to take the result set from each of those executions and generate an Excel file from each set? How do I map that result set variable to be the input for creating a new Excel file? Is this best done as a script task somehow?
Should I not be using SSIS for this task? I thought I would just create a package and schedule it to run daily with SQL Agent, and it would autogenerate the Excel files as needed.
Thanks for your advice!
View 6 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Jul 29, 2015
I have 2 different excel files file1 and file2. file1 should be loaded to table1 and file2 should be loaded to table2. Both of the files will have 1 sheet inside. Do I need to create separate excel source for file1 and file2? I mean file1 in one excel source and that will be connecting to 1 execute sql task. file2 in other excel source and that will be connecting to another execute sql task. Is this the way I should proceed or is there any looping should be done? I need to schedule this activity to run every week. So, I'll get new files every week with the same file names and sheet names. Do I need to consider anything for this requirement also?
I'm planning to do truncate and reload not an incremental load.
View 5 Replies
View Related
Oct 24, 2007
I am getting the following error when trying to load multiple excel files using for each loop container in SSIS, I tried to put the quotes in several different ways but still can't get rid of this error. I was able to successfully load single excel file, but when I use the for each loop container that's when I am having problems. Any help is greatly appreciated. Thx.
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package1 [Connection manager "SourceConnectionExcel"]: The connection string components cannot contain unquoted semicolons. If the value must contain a semicolon, enclose the entire value in quotes. This error occurs when values in the connection string contain unquoted semicolons, such as the InitialCatalog property.
Error at Package1: The result of the expression ""Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::Folder] + @[User::file] + ";Extended Properties="Excel 8.0;HDR=NO";"
" on property "ExcelFilePath" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
View 8 Replies
View Related
May 12, 2015
I am using FTP Connection manager in SSIS to upload files. Does it close session after it completes the task?
View 2 Replies
View Related
Aug 15, 2006
Hi,
I have used the SSIS import/export wizard to create a transfer from one database to another.
Q1: Why are some files from this wizard stored in the the temp folder ?
Example: C:Documents and SettingspbhLocal SettingsTemp
This is extreemly unuseful when checking in the solution in tfs since these files will not be saved.
Q2: I have tried to move these files and manually edit the location for these file references in the dtsx package file. However: The connection string wants an absolute path for the files..
Example:
DTS:Name="ConnectionString">c: mp1EA.tmp
How can I refer to $project$ mp1ea.tmp, a relative path to the project directory instead?
Regards,
Pål
View 3 Replies
View Related
Aug 10, 2007
How do you go about setting up configuration files to control connection strings when SSIS packages are migrated from a test environment to a production environment? Specifically, changing the server you are connecting to and possibly different login and password.
View 1 Replies
View Related
Oct 19, 2010
I have a SSIS package which reads an excel file and loads data into a table using script component(C#) as a source. The package runs without any errors when I manually run it on my machine and on the server. But the package fails when run as a SQL Server Agent job.
I tried all the possible fixes I found on the web but still can't get it to work.
View 14 Replies
View Related
Jun 24, 2011
Find data below
ColA ColB
74378 11213
312 21312
34 234
7329 27924
[Code] ....
Using excel connection to load data to SQL Server When I try doing this character data is loading as nulls, I have tried by putting IMEX=1 property in connection string and removing IMEX=1 property from connection string , in both cases it is showing nulls, in the data viewer which i have placed after Excel source. I have also tried using the OPENROWSET which for some reason does not create an adhoc connection. I also tried changing the Datatypes in the advanced editor which again throws error. For some reason SSIS excel connection reads only the first 8 rows and decides a datatype and rest showup NULL.
View 11 Replies
View Related
May 29, 2008
Hello,
I've SQL Server running on 64 bit. When I schedule a package to run every night which has excel data transformation, it fails. Initally I had a problem running through BIDS also but then I found in project properties you can switch this off by specifying property Run64BitRuntime by false. After going through some forums, many have suggested that when scheduling a package, modify the command arguments to run as 32bit runtime. These command argumnents can be generated from making use of tool DTExecUI.exe Even after using generated command arguments from this tool, it doesn't help.
Below is my command argument and the error message generated.
/FILE "D:DevDWLoadAll.dtsx"
/CONFIGFILE "D:DevDWdevCongig.dtsConfig"
/CONNECTION "customers.dtsx";"D:DevDWcustomers.dtsx"
/CONNECTION "Addresses.dtsx";"D:DevDWAddresses.dtsx"
/CONNECTION "Counties.dtsx";"D:DevDWCounties.dtsx"
/CONNECTION "Countries.dtsx";"D:DevDWCountries.dtsx"
/CONNECTION "ExcelLoad.dtsx";"D:DevDWExcelLoad.dtsx"
/CONNECTION Test;""Data Source=TestDW;Initial Catalog=TestStagingDW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
Message
Executed as user: DWUserSQLServiceAcc. ...0.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 00:05:00 Error: 2008-05-28 00:06:02.31 Code: 0xC0202009 Source: Excel Load Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-05-28 00:06:02.31 Code: 0xC020801C Source: Copy Data Excel Source [5052] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.
Any suggestions???
Circuit
View 3 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
Mar 30, 2006
I am new to SSIS. I created a XML configuration file for my package. I found lots of data on how to do this but I can't find anything on how to get the values back out. I am trying to get them out in a Script file. Any help and maybe examples would be appreciated.
View 4 Replies
View Related
Jul 30, 2013
I need to process a 2012 Excel file. In SSIS Connection Manager, I am only given an option until Excel 2007 version. When I use this in my connection for Excel Source, I am prompted with this error when I attempt to select the name of the sheet:
"Could not retrieve the table information for the connection manager 'Excel Connection Manager'.
Failed to connect to the source using the connection manager 'Excel Connection Manager'"
Also my Run64BitRuntime is set to false.
View 6 Replies
View Related
Nov 5, 2007
Hi,
I am looping through excel files to import data into a sql server table.
Added a filename variable.
This variable gets set inside a foreach loop container.
In the Dataflow tab, there is a;
excel source
oledb source
In the design mode, there is an error icon (red circle with cross in it).
Can not acquire connection from connection manager.
In the connection manager, the excel connection file path is empty. It is empty because I think the variable should be assigned to it.
So when I ruun the ssis package I get this error:
The AcquireConnection method call to the connection manager "Excel Connection" failed with error code 0x.....
Any thoughts please?
Thanks
View 1 Replies
View Related
Jul 12, 2006
I created a package, created an XML Config file, created a deployment utility and then deployed to server. I scheduled it with agent and I get this error (changed the package name in the error to IMPORT to make it more readable):
Description: The configuration file name "C:Documents and SettingschrisMy DocumentsVisual Studio 2005ProjectsIMPORTIMPORTIMPORT.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-07-12 13:11:39.96 Code: 0x80012059 Source: IMPORT Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2006-07-12 13:11:40.56 Source: Import Data Validating: 0% complete End Progress Progress: 2006-07-12 13:11:40.56 Source:... Process Exit Code 1. The step failed.
So basically its trying to point to a config file on my dev workstation. When I created the deploy utility it created a config file in the Deployment directory with the Manifest and the package. I installed from the deployment directory. When installing it asked where I wanted to install and I left it the default of "C:Program FilesMicrosoft SQL Server90DTSPackagesIMPORT" and if I look in that folder the IMPORT.dtsconfig is there.
Ideas of where I went wrong? I want to make sure I understand the whole configuration file notion correctly as I am starting to roll a bunch of packages with config files out to production. I've done the tutorial and thought it was straightforward and made sense. I can fix it by editing the xml of the package and removing the line pointing to my dev box - just want to know what I am doing wrong :)
View 1 Replies
View Related
Nov 2, 2006
I created a project with multiple packages. I created a global
config file that all packages reference. I also created a config file
for each package that contains the package specific settings. I
checked it all into TFS. I went to a different machine and checked it
all out. Upon loading a package into the IDE I got the following 3
warnings.
Warning loading MT_LSE_PROD_StageLoad.dtsx: The
configuration file "MT_LSE_PROD_StageLoad.dtsConfig" cannot be found.
Check the directory and file name.
e:contentloadersprint1aMT_LSE_PROD_StageLoad.dtsx
Warning
loading MT_LSE_PROD_StageLoad.dtsx: The configuration file
"Environment.dtsConfig" cannot be found. Check the directory and file
name. e:contentloadersprint1aMT_LSE_PROD_StageLoad.dtsx
Warning
loading MT_LSE_PROD_StageLoad.dtsx: Failed to load at least one of the
configuration entries for the package. Check configurations entries and
previous warnings to see descriptions of which configuration failed.
e:contentloadersprint1aMT_LSE_PROD_StageLoad.dtsxAny
ideas??? And yes, the files *ARE* there! I tried building the project
and it builds. I also tried doing a deployment build and that too
built. I am so confused!!!
View 2 Replies
View Related
Apr 14, 2008
Hi SSIsians,
I have a package with Excel Destination with dynamic connection.
I did ExcelFilePath = [@user::VarSourceFolder]+[@user::VarSourceFileName]
then i changed the Delayvalidation = True.
When i try to run the package in BIDS it gives the error.
ERROR:
[Excel Source [30501]] Error: An OLE DB error has occurred. Error code: 0x80040E37.
[Excel Source [30501]] Error: Opening a rowset for "DailySheet" failed. Check that the object exists in the database.
It saying there is no sheet in the name of "DailySheet" but when i removed the expression in connection manager property it is working fine.
Please let me know what is the problem OR how to configure the dynamic connection in ExcelSource.
Thanks
Thiru
SE - SSIS
Chennai
View 5 Replies
View Related
Oct 3, 2006
I have been attempting to create a managed stored procedure which calls a web service using WSE 3.0 for security.
It appears that the WSE-generated config file (or possibly the app.config file) is not accessible to the .Net code.
Is there a method for using config files with CLR managed sprocs?
Thanks,
Max
View 1 Replies
View Related
Sep 19, 2007
I have a package that executes 3 other packages in it. From the command line I pass in which config file to use (just contains db/seerver) does this setting get carried over into the child packages as well?
View 3 Replies
View Related
Aug 31, 2005
Anybody find a sound approach to being able to store DataSource connection information in a configuration and be able to access a Data Source that requires a password for login?
View 6 Replies
View Related
Oct 2, 2006
Hi There
I am having some issues with dts packages i have migrated using the package migration wizard.
One of the connection managers points to an execl flat file source.
I have not altered anything after the package migration, the conenction manager is using Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
When i test the connection i get the following error :
"Test connection failed becuase of an error in initializing provider. Cannot start your application. The workgroup information file is missing or opened exclusively by anotehr user."
Ok i am 99% sure this file is not being accessed by another user, the rest of the error is greek to me. Looking on the net for this error it has to do with access database security and having to sertup htm pages for IIS, i cannot findanything on this error relating to ssis connection manager.
PLEASE HELP.
Thanx
View 4 Replies
View Related
Jun 5, 2006
Does anyone know if it's possible to use the standard .config file within a CLR Trigger to read properties via the System.Configuration namespace
I guess it's not possible because the CLR Trigger needs to be compiled as an assembly which is hosted by SQL Server
Thanks
Jason
View 1 Replies
View Related
Apr 11, 2006
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM. I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem. please, please, please someone throw me a bone here and help me resolve this problem.
When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add. I get the following message:
you are attempting to add a database to an asp.net application. for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder. would you like to place the database inside the 'app_data' folder? I click YES (I know this message is normal)
then I get the following message:
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I can add anything else but this damn mdf file.
thanks for all your help in advance.
View 2 Replies
View Related
