In SQL Server 2000 DTS there is an Extended Connection properties
window that you can set the IMEX property for importing Excel
spreadsheets into a SQL Server table. Does anyone know where this is
in SQL Server 2005 SSIS?
Thanks,
While importing data from Excel source , some column is getting null value even though excel column has value.To Resolve the issue we tried with
HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftOffice14.0Access Connectivity EngineEnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
• xls
HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
the connection string of the excel
UPPER(REVERSE(SUBSTRING( REVERSE(@[User::VarInputExcelFile]), 1, 5) ) ) == ".XLSX" ? "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::VarInputExcelFile] + ";Extended Properties="Excel 12.0;HDR=Yes;IMEX=1";":"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" + @[User::VarInputExcelFile] + ";Extended Properties="EXCEL 8.0;HDR=Yes;IMEX=1";"
by doing the above setting also , the column is coming as null from excel source even though there is data in excel.
Hi. I need to import excel file in database. i first need to do an unpivot task. the column names are dates and SSIS seems to be unable to pick up the column name as it is replaced by F2 F3 F4etc Can you advise of a solution. thanks ken
View 1 Replies View RelatedI am new to SQL Server and am trying to import rows from Excel using SSIS and am getting the following error.
Does anyone have any ideas on how to resolve??
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has started.
Error: 0xC0202009 at Data Flow Task, OLE DB Destination [583]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert the value NULL into column 'SupplierID', table 'Northwind.dbo.Suppliers'; column does not allow nulls. INSERT fails.".
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has ended.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (583) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (583)" wrote 1 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
Getting started.
Hello All
First time setting up A SSIS
Trying to import a excel that creates a new table called lockbox.
Does not import any records from Columns-Contract Id, Owner ID,
that have a null value.
Then in the Site Id -that is a number value- change to a text value
and update it to it text value.
for example: Site Id Column
2 = Ell
3 = CSI
12 = Ell2
Can someone get me started in the right direction?
Thanks for your time and help
JK
I want to import excel file in sqlserver , i was informed that we have to pay of drivers like .jet and .ace.
i have sqlserver and OS windows licences and do not want to pay just to import excel in sqlserver.
q1) Is ssis requires .jet or .ace or any other componenet for xls import which is lincenced.
apart from sqlserver and OSwindows licence ,.
Q2)is it possible to convert xls into micorsoft word and then transport it.
Q3) do i have to pay any thing if i use bulk insert to import .txt or .csv file.
what other type of files can be imported by bulk insert.
Q4) how many type of files like .txt or .csv , can be imported using bcp?
I have one share folder ,every month end-user will copy & paste excel file into particular share folder. Ok .
Now i have to create new SSIS package as schedule should run every month to find the file and then load automatically into Sql server tables and then move those excel file to another share folder if file successfully loaded only.
The excel file name will be changing every month. but the format wont change. If any body knows this process or steps.
Please share with me .
Thanks in Advance.
I have an SSIS package that imports from an Excel file with data beginning in the 7th row.
Unlike the same operation with a csv file ('Header Rows to Skip' in Connection Manager Editor), I can't seem to find a way to ignore the first 6 rows of an Excel file connection.
I'm guessing the answer might be in one of the Data Flow Transformation objects, but I'm not very familiar with them.
Any pointers would be greatly appreciated.
Eric
Hello,
I have the following scenario, and my main question is why Excel Formatted file errors out while TXT formatted file does not? Any workaround would be helpful, but I do want to avoid dtexec, and still want to manage it as SSIS.
MAIN ISSUES - permission issue & excel connection issue
SSIS Package Run Directly (not SQL Job, not automated)
* Every format and and folder location works!
Package Run under SQL JOB
TXT Format
A. Project Folder - GOOD
B. Client Folder - FAILS!
Conclusion - TXT Format works, but Client Folder does not have sufficient permission for PRODsvcSQLDMS
EXCEL Format
A. Project Folder - FAILS!
B. Client Folder - FAILS!
Conclusion - EXCEL Format DOES NOT work. Maybe SSIS Excel Connection Bug.
SQL Build 9.00.2153.00
-Lawrence
I am new to SSIS.
I am interested in using SSIS to import an excel spreadsheet into a SQL server database. My biggest concern is how to handle/manage errors that might occur when the import process occurs. Can anyone give me any guidance on this?
I could write some C# code to do the import and to create a custom .txt file listing errors that occur on import. Using C# code to do the import seems like I would just be reinvinting the wheel so to speak.
Hello everybody...
I have a very simple SSIS package that loop throught the worksheets of an Excel file and insert the data into a SQL server 2005 table.
The SSIS is very simple and works fine the problem is that after the Package executes if I double click on the Excel file imported I have the message that the file is in use.
I think that the Excel connection manager of the package doesn't release the Excel resourse but this is only a guess..
Do am I right? If yes how can I release the resource?
Thank you very much
Marina!
I have an Excel file(.xls) that I need to import to SQL Server database. I am trying to use the Import wizard. However, when I select the file and click next I get the warning "External table is not in the expected format.(Microsoft JET Database Engine)" . I opened the .xls file using a text editor. It looks like some html document.
<html xmlns="urnchemas-microsoft-comfficeffice"
xmlns:x="urnchemas-microsoft-comffice:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<head>.................
I also used OPENQUERY to see if it works.
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'Excel 12.0 xml;HDR=Yes;Database=C:myexcelfile.xls', 'SELECT * FROM [Table1$]');
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=C:datamyexcelfile.xls', 'SELECT * FROM [Table1$]')
I get the following errors.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" returned message "External table is not in the expected format.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
When I open the file and save it to overwrite the existing .xls file it works fine.
Is there a way to import such files using SSIS without having to open and save it?
Thanks in advance!
Tkaram
Its my first time trying to set up a SSIS job using the import/export wizard to export the results of a query into an excel file.
i am using sql server 2005, windows XP SP2.
In the last step in the excel destination editor, in the connection manager when i am trying to select the excel file to write into i am getting this error.
'Microsoft.Jet.OLEDB.4.0 ' provider is not registered on the local machine.
I have set up the excel connection manager. i have changed the properties of the project to set
the Run64BitRuntime to false.
please let me know if there is anything else i need to do to fix this.
thank you in advance
Hello,
I have a problem with the Import of an Excel file with SSIS and hope one of you can help me out.
There is a column with mixed data (format is TEXT) in an excel file and I want to import it as Text (DT_WSTR (255)).
So far everything works fine but some fields like "9760020" imports "9.76002e+006".
My settings so far are:
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=<FileName>;Extended Properties="EXCEL 8.0;HDR=NO;IMEX=1"
In addition I altered the registry entry from Microsoft.Jet.engine.excel
TypeGuessRows to 0 (ImportMixedType = Text)
Has someone got a solution?
Thankx
I am using VS2012 and creating a package on a 64bit machine to import some data from a .xlsx file. My question is that I am getting an error for the Excel connection manager, do I need to install some kind of excel drive or excel itself on the machine in order to be able to import the data?
View 6 Replies View RelatedI am using vs 2010 and I have an .xls file that I am trying to import into SQL Server 2012, and I have most of it figured out, but I have a date field that is giving me problems, and what I would like to do is put that date in a variable so I can add it to every record in my SQL Table.
I am using a SQL Task Editor with an excel connection and I have no problem getting other data from the excel document and putting into my variable, its just the date that I have problems.
I'm trying to use Excel in SSIS to import the data from spreadsheet to a staging table. The package runs well from the web server using SSMS. But when I deploy and try to execute the package, I'm getting the below error. I've a question, whether I've to install the AccessDatabaseEngine driver in SQL database server or the web server where I'm executing the SSIS?
Error: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode.
(Applies to SQLServer 2005 SP1)
We have found that using the SSIS "Import and Export Wizard" using the "Microsoft Excel" data source that there appears to be a maximum column length of 255 characters for any row.
Even when defining the destination table columns as nvarchar(4000), the wizard fails with the errors shown below.
We have found no workaround except manually changing the imput data. There doesn't appear to be any "Advanced" options for the Excel importer as there are for the flat-text importer. So, no question here, just posting the bug so that *next* time someone searches the web for an answer, this post comes up
MessagesError 0xc020901c: Data Flow Task: There was an error with output column "English String" (18) on output "Excel Source Output" (9). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.". (SQL Server Import and Export Wizard) Error 0xc020902a: Data Flow Task: The "output column "English String" (18)" failed because truncation occurred, and the truncation row disposition on "output column "English String" (18)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. (SQL Server Import and Export Wizard) Error 0xc0047038: Data Flow Task: The PrimeOutput method on component "Source - Sheet1$" (1) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. (SQL Server Import and Export Wizard) Error 0xc0047021: Data Flow Task: Thread "SourceThread0" has exited with error code 0xC0047038. (SQL Server Import and Export Wizard) Error 0xc0047039: Data Flow Task: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. (SQL Server Import and Export Wizard) Error 0xc0047021: Data Flow Task: Thread "WorkThread0" has exited with error code 0xC0047039. (SQL Server Import and Export Wizard)
edit: After searching further this is documented under "Excel Source"
in BOL which provides a registry-based workaround. I guess the issue
is that the wizard considers truncation to be a 'fail' case and
there's no easy way to override this behaviour, specify the column
types nor determine which line is in error)
Truncated text. When the driver determines that an Excel column contains
text data, the driver selects the data type (string or memo) based on the
longest value that it samples. If the driver does not discover any values longer
than 255 characters in the rows that it samples, it treats the column as a
255-character string column instead of a memo column. Therefore, values longer
than 255 characters may be truncated. To import data from a memo column without
truncation, you must make sure that the memo column in at least one of the
sampled rows contains a value longer than 255 characters, or you must increase
the number of rows sampled by the driver to include such a row. You can increase
the number of rows sampled by increasing the value of TypeGuessRows under
the HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel registry
key.
)
I am attempting to run an SSIS package that, among other things, imports a spreadsheet from excel into a database table. The package runs without any issues within Visual Studio. I have tried executing the package through both, the MSDB run package and through dtexec (trying to kick of the package through a stored procedure) and I get 2 different behaviors.
Using dtexec (the method I really need to use): The package will run successfully...up to the point when the spreadsheet is imported at which time it fails with Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Here is the code:
exec xp_cmdshell 'dtexec /sq PopulateTRTLStationandtRTLUnitMapping /ser SERVERNAME
Running it through the MSDB Run Package UI...It will also make it up to the point where the Excel spreadsheet is imported but errors with: The Product level is insufficient for the component "Lookup Station and Account Type: (1894) ...and 1 line with that same error for every single task in that dataflow. Here is the code it runs.
/DTS "MSDBPopulateTRTLStationandtRTLUnitMapping" /SERVER "SERVERNAME" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
The machine is running 32 bit OS Windows Server 2003 SP1 and Db SQL Server 2005 32 bit. I found one forum posting that suggested turning the Delay Validation property to True...but that did not fix the issue. I did create the package with my username with a ProtectionLevel of EncryptSensitiveWithUserKey. I don't think it is related to the account however because all of the tasks (serveral work tables are created) up to the Excel import will execute.
I really need to get this working as soon as possible so am open to any solutions someone can present.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
I am trying to import an xlsx spreadsheet into a sql 2008 r2 database using the SSMS Import Wizard. When pointed to the spreadsheet ("choose a data source") the Import Wizard returns this error:
"The operation could not be completed" The Microsoft ACE.OLEDB.12.0 provider is not registered on the local machine (System.Data)
How can I address that issue? (e.g. Where is this provider and how do I install it?)
l've the following situation,
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Thanks.
Regards,
Yong Boon, Lim
p/s : The excel header is at the row 7.
Hi
I want to import excel in SSIS via sql command and change the data types. can anyone guide me on this or give me some sample command on how to change datatypes explicitly.
I'm importing a multi tab spreadsheet using Import wizard, which I understand to use the same internals as SSIS. The total number of columns in the spread sheet will be over 500. The import wizard defaults everything to varchar 255. I understand there is an XML file I can manipulate to change this and they are located
C:Program FilesMicrosoft SQL Server100DTSMappingFiles
Assuming one of these will control Excel defaults, which one is it? None of the names lend themselves to the Excel as a source. SqlClientToMSSql10?
Trying to upload excel in server where excel is not installed. BIDs was there in the server, when i am trying to craete Excel source I am not able.what the workround for this.. How to upload excel without excel installed on the server.
View 4 Replies View RelatedWe have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
View 4 Replies View Related
Hi,
I am creating an SSIS package witha a Dataflow task, which reads from an Excel source and then uses script component to dumpt the data to multiple tables in Sql Server database
I need to some how make my Excel source dynamic, that is my excel template which i would be using to map the excel columns to script component's input columns would be dynamic..
In other words, I should be able to define the Excel Source, Column Mapping Information, Precedence constraint to the Script component dynamically
Please suggest how could i accomplish this
Regards,
Kalyan
Hi,
I am importing data from Excel to SQL Server. My Excel files are .html file format. Using ActiveX Script I am saving that file to xls file format as follows
Set myXL = CreateObject("Excel.Application")
Set myXLWorkBook = myXL.Workbooks.Open(filename)
Set myXLWorkSheet = myXL.ActiveSheet
myXLWorkBook.SaveAs filename, 43 '43-xlExcel9795
Set oPkg = DTSGlobalVariables.Parent
Set oConn = oPkg.Connections("Excel")
This script works fine but it prompts me that the file already exists do you want to replace it. How can I avoid this prompt
Secondly this file contains data like that
Col1 Col9 Col10
Row-1 Report Name
Row-2 From Date
Row-3 To Date
Location Count Amount
9999 1 100.00
9876 10 20.40
Where Row are the excel rows
The TransformData Task thinks that the Col 1 is of nvarchar(255) but after the tranfer all values in Col1 is NULL. How can I convert a nvarchar to Char or varchar
Here is ActiveX Script for Transformation
Function Main()
Dim Result
DTSDestination("Amount") = DTSSource("F10")
DTSDestination("Count = DTSSource("F9")
DTSDestination("StoreNumber") = DTSSource("ReportName")
Result = DTSTransformStat_OK
Main = Result
End Function
:)
I'm needing to import a .csv file into a SQL database. This needs to be done through automation so I need the DOS commands, if any. Or if someone knows a better way, feel free to enlighten me.
I've tried looking in books online for SQL server but haven't had much luck.
I've been asked to create an automated DTS import which is to take place each and every evening. The import routine is to import data into an SQL table from an Excel spreadsheet.
The spreadsheet is not massively complicated though is does contain formulas and calculations.
When using the DTS Wizard:
"Choose Data Sourse"
Data Source = Microsoft Excel 97-2000
I then browse to the file name.
"Choose Destination"
I select the Server name and Database to import into.
"Specify Table Copy or Query"
I select 'Use a query to specify the data transfer' then click Next.
I then click on the query builder and here's where I get stuck. The Source tables panel contains many rows and when expanded they all contain the same thing (field headings in the Excel spreadsheet).
I'm totally stuck here - can anyone help? :confused:
Hi all,
Can anyone suggest a method of importing an Excel spreadsheet into SQL as a table?
TIA,
SamuelT
Hii
I want to import data from excel 2003 to sql.(sql server 2005). i am using windows xp.
when i am using the code i get the error.
the code is :
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 11;Database=D:BAESystemsTest_Log.xls;HDR=YES','Select * From [Sheet1$]')
The error is :
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Could not find installable ISAM.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
please get me out of this trouble.
Hi,
I have to import Excel file to SQL Server 2005 using SSIS. I am having alot of problems and was wondering if it's no trouble if you could please instruct me how to proceed.
My scenario:
I have an excel file that contains a heading and then subheading such as
HEADING
Acc_g Acc_n
12 n_a2
13 n_b3
My database has a table called accounts with fields acc_g and acc_n.
I need to enter the values from the excel into the table. I tried doing it but SSIS also tries to insert the rows following the last line in excel and returns nulls and the table does't allow null values.
How can i resolve it?
Thanks