SSIS Expression Result Limit Of 4000 Bytes
Feb 6, 2007
I have a package with an input column that is varchar(8000).
I want to strip the first byte off of this column and put it in one result column and the remainder of the field I want to go to a second column. If the input column is an empty string, I want to return NULL.
Pulling the first byte off works fine, no issues, however putting the remainder of the input column into an output column is giving me a little trouble.
If I use this expression:
LEN(FLD1) == 0 ? NULL(DT_WSTR,1) : SUBSTRING(FLD1, 2, LEN(FLD1) - 1))
I get an error that says my expression evaluates to a string of greater than 4000 bytes.
If I do this instead:
LEN(FLD1) == 0 ? NULL(DT_WSTR,1) : RTRIM(SUBSTRING(FLD1, 2, 7999))
The expression passes muster but I get the warning that I will be truncating the column at 4000 bytes.
In actuality, I don't care if the result column is truncated after 4000 bytes. I find the second solution to be a bit clunky and I'm wondering if anyone can give me a reason why the first solution won't evaluate but the second will?
View 14 Replies
ADVERTISEMENT
Oct 11, 2006
varchar can only hold 4000 bytes
and there is no text column in sql server mobile
View 6 Replies
View Related
Mar 3, 2008
I'm using a function which splits a comma delimitted list of numbers which I call from a stored procedure. The list is defined as a NVarChar which has a maximum length of 4000 characters. I often need to pass more than 4000 characters. If I do so, I receive the error message below. Is there any way around this limitation? Thanks.
Msg 257, Level 16, State 2, Procedure up_ExportQuickSearchresults, Line 0
Implicit conversion from data type text to nvarchar is not allowed. Use the CONVERT function to run this query.
CREATE FUNCTION dbo.Split
(
@ItemList NVARCHAR(4000),
@delimiter CHAR(1)
)
RETURNS @IDTable TABLE (IDDir NVARCHAR(4000))
AS
BEGIN
DECLARE @tempItemList NVARCHAR(4000)
SET @tempItemList = @ItemList
DECLARE @i INT
DECLARE @IDDir NVARCHAR(4000)
SET @tempItemList = REPLACE (@tempItemList, ' ', '')
SET @i = CHARINDEX(@delimiter, @tempItemList)
WHILE (LEN(@tempItemList) > 0)
BEGIN
IF @i = 0
SET @IDDir = @tempItemList
ELSE
SET @IDDir = LEFT(@tempItemList, @i - 1)
INSERT INTO @IDTable(IDDir) VALUES(@IDDir)
IF @i = 0
SET @tempItemList = ''
ELSE
SET @tempItemList = RIGHT(@tempItemList, LEN(@tempItemList) - @i)
SET @i = CHARINDEX(@delimiter, @tempItemList)
END
RETURN
END
CREATE PROCEDURE up_ExportSelectedDirectors
@p_selectedDirectors NVARCHAR(4000)
AS
BEGIN
SELECT * FROM v_SearchResultsDirectors
WHERE IDDir IN (SELECT IDDir FROM split(@p_selectedDirectors, ','))
END
GO
View 5 Replies
View Related
Apr 4, 2006
I am building rather large SQL statements using expressions and I am about to hit the 4000 character limit. First, what were the reasons for setting such a low limit? With it in place you are forced to come up with other solutions, but perhaps that was the intention.
Speaking of limits, what are the limits for storing a value in a string that is defined in a package configuration file? What are the limits when creating a string within a script task and then use it to set a string variable in the package? What are the limits when using a string value as an input parameter to an Execute SQL Task using OLE DB? Do these differ depending on the connection type?
I guess I'm getting a bit paranoid about limits, but I don't want to hit any others late in the design.
Regards,
Lars
View 6 Replies
View Related
May 11, 2007
I've written a managed (C#) stored procedure with the following signature:
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Sproc(string startDate, string endDate, string idList)...
Sometimes when I call this sproc, my comma-separated list of IDs exceeds 4000 characters. How can I get around this problem?
I guess I need something equivalent to NVarchar(MAX), but for CLR sprocs instead of TSQL.
Any thoughts?
View 3 Replies
View Related
Feb 5, 2008
Hello,
I have 2 table, "table1" is the source one and the other one "table2" is the destination.
Columns in Table1 and in Table2 are nvarchar(max).
Data loaded from table1 is performed by SSIS OLEDB data flow source, I have found out that opening "Data flow Path Editor" in the Metadata, columns are as: DT_WSTR with lenght 4000.
First question:
Why SSIS limit the column to 4000.
Then I get some error for this issue, with the error:
input column "col1" (xxxx) and reference column named (coln) have incompatible data type.
As written before both columns are string, the problem is that SSIS limit the lenght of the string to 4000.
How can I solve this issue?
Thank
View 4 Replies
View Related
Sep 30, 2015
I thought I understand the notion in the Title until I ran the query below. This query inserts a 5000 byte value into two columns in the same record and sql (2008) doesn't complain.Â
-- drop table table_1
create table table_1(
[mychar1] [varchar](8000) NULL,
[mychar2] [varchar](8000) NULL
)
insert into table_1 ( mychar1, mychar2)
values (replicate('a', 5000) , replicate('b', 5000))
select * from table_1
-- truncate table table_1
I just noticed that using  Replicate ('a', 50000) doesn't cause an issue either. I'll be reviewing the replicate documentation too.
View 5 Replies
View Related
Jul 6, 2007
Hello,
I have to build dynamic sql statement in an SQL task.
The SQL statement is way over 4000 char.
The expression builder complains the length of the expression.
Any work around to this limitation?
Thanks a lot!
View 4 Replies
View Related
Apr 23, 2008
Hi,
I€™m trying to create a VERY wide table, with 1,000 columns of type varchar(MAX), nullable.
The CREATE TABLE statement (both in SQL 2005 & 2008), gives the following warning:
Warning: The table "WIDE_TABLE" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
When I insert data into the table, filling all columns with small, 10-byte string values, I get the following error:
Msg 50000, Level 16, State 1, Procedure sp_pivot, Line 118
Cannot create a row of size 15034 which is greater than the allowable maximum of 8060.
I€™d like to verify this observation: each row is created with 2000 bytes of offset data (2 byte * 1000 columns), 125 bytes for null bitmap (1000 columns / 8 bits) and some more €œwasted€? row information. This leaves less than 6K for the data itself. But since not all columns can fit within the page, forwarding pointers in the row need to be created, 24 byte per column, which very quickly add up to more than 8K, thus the error. So the 8K limit is met for much less columns than the max 1024 column restriction.
Furthermore, in SQL 2008, SPARSE columns will not solve the problem (maybe save some €œmetadata€? space in case the columns are null, but if not, I€™m with the same problem again, or even worse, since now each value takes more storage space. The max 30,000 columns in 2008 is only for cases where the column values are really sparse€¦
Is this the right observation? if so, is there a workaround besides splitting to multiple tables?
Thanks,
Aviv.
View 7 Replies
View Related
Apr 15, 2006
Hi, I have a datareader component of which i am dynamically setting its sqlcommand statement with expression (click the background of dataflow > properties > expressions). Now my sql select statement has about 600 fields so that makes my expression statment "select field1, field2, .....from table1 where field2 >=" + @[User::dateforfield2] but when i evalute the expresssion (which is right), i get the error: A string literal in the expression exceeds the maximum allowed length of 4000 character and i think its because of the fields in my select statment causing my string literal to grow more than 4000 characters. Is there any way to increase the max string literal for expressions. Please help.
View 1 Replies
View Related
Feb 8, 2007
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works
However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur
(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)
View 4 Replies
View Related
Aug 2, 2007
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
View 3 Replies
View Related
Apr 7, 2008
Dear All
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
Here is my query sample for yours to understand.
SET NOCOUNT ON
DECLARE @ITEMCODE int, @ITEMNAME nvarchar(50), @message varchar(80), @qstring varchar(8000)
Set @qstring = 'select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm'
PRINT '-------- ITEM Products Report --------'
DECLARE ITEM_cursor CURSOR FOR
execute (@qstring)
OPEN ITEM_cursor
FETCH NEXT FROM ITEM_cursor
INTO @ITEMCODE
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT ' '
SELECT @message = '----- Products From ITEM: ' +
@ITEMNAME
PRINT @message
-- Get the next ITEM.
FETCH NEXT FROM ITEM_cursor
INTO @ITEMcode
END
CLOSE ITEM_cursor
DEALLOCATE ITEM_cursor
Why i use @qstring? It is because the query will be changed by different critiera.
Regards
Edmund
View 6 Replies
View Related
Apr 20, 2006
I'm dynamically attaching some files to an email. I'm using an expression to build something similar to this:
@[User::FilePath] + @[User::FileName1] + (DT_STR,30,1252)YEAR( GETDATE()) + (DT_STR,30,1252)MONTH( GETDATE()) + (DT_STR,30,1252)DAY( GETDATE()) + ".csv" + "|" + @[User::FilePath] + @[User::FileName2] + (DT_STR,30,1252)YEAR( GETDATE()) + (DT_STR,30,1252)MONTH( GETDATE()) + (DT_STR,30,1252)DAY( GETDATE()) + ".csv"
BOL says to use a pipe delimiter to send multiple attachments. This works if I only have a couple of files. Once I get a few more attachments built in the expression builder I get a truncation error. If I build the whole expression in notepad and past it into the property window it also gets truncated. I see in the MSDN library that some expressions may be limited to 4000 bytes. I'm nowhere near that. Maybe a thousand bytes at most.
Question 1: Does anyone know if certain expressions have smaller byte limits?
Question 2: Is there a smaller byte limit for the file attachment value?
Question 3: Is there way I could build this string outside of the file attachment property and assign it to a variable and then use this variable in the file attachment property?
Thanks in advance for any help!!!
MarkAx
View 1 Replies
View Related
Apr 23, 2015
In select query, how can i limit sequence upto 5 and get result like below?
Rec_ID CompanySequence#
123ABC11
124ABC22
125ABC33
126ABC44
127ABC55
[Code] .....
View 3 Replies
View Related
Jan 10, 2008
HI, I am running the below method which returns this error: The parameterized query '(@contactdate nvarchar(4000),@dnbnumber nvarchar(4000),@prospect' expects the parameter '@futureopportunity', which was not supplied" Please help.Private Shared Sub InsertData(ByVal sourceTable As System.Data.DataTable, ByVal destConnection As SqlConnection)
' old method: Lots of INSERT statements Dim rowscopied As Integer = 0
' first, create the insert command that we will call over and over:
destConnection.Open()Using ins As New SqlCommand("INSERT INTO [tblAppointmentDisposition] ([contactdate], [dnbnumber], [prospectname], [businessofficer], [phonemeeting], [followupcalldate2], [phonemeetingappt], [followupcalldate3], [appointmentdate], [appointmentlocation], [appointmentkept], [applicationgenerated], [applicationgenerated2], [applicationgenerated3], [comments], [newaccount], [futureopportunity]) VALUES (@contactdate, @dnbnumber, @prospectname, @businessofficer, @phonemeeting, @followupcalldate2, @phonemeetingappt, @followupcalldate3, @appointmentdate, @appointmentlocation, @appointmentkept, @applicationgenerated, @applicationgenerated2, @applicationgenerated3, @comments, @newaccount, @futureopportunity)", destConnection)
ins.CommandType = CommandType.Textins.Parameters.Add("@contactdate", SqlDbType.NVarChar)
ins.Parameters.Add("@dnbnumber", SqlDbType.NVarChar)ins.Parameters.Add("@prospectname", SqlDbType.Text)
ins.Parameters.Add("@businessofficer", SqlDbType.NChar)ins.Parameters.Add("@phonemeeting", SqlDbType.NVarChar)
ins.Parameters.Add("@followupcalldate2", SqlDbType.NVarChar)ins.Parameters.Add("@phonemeetingappt", SqlDbType.NVarChar)
ins.Parameters.Add("@followupcalldate3", SqlDbType.NVarChar)ins.Parameters.Add("@appointmentdate", SqlDbType.NVarChar)
ins.Parameters.Add("@appointmentlocation", SqlDbType.NVarChar)ins.Parameters.Add("@appointmentkept", SqlDbType.NVarChar)
ins.Parameters.Add("@applicationgenerated", SqlDbType.NVarChar)ins.Parameters.Add("@applicationgenerated2", SqlDbType.NVarChar)
ins.Parameters.Add("@applicationgenerated3", SqlDbType.NVarChar)ins.Parameters.Add("@comments", SqlDbType.Text)
ins.Parameters.Add("@newaccount", SqlDbType.NVarChar)ins.Parameters.Add("@futureopportunity", SqlDbType.NVarChar)
' and now, do the work: For Each r As DataRow In sourceTable.RowsFor i As Integer = 0 To 15
ins.Parameters(i).Value = r(i)
Next
ins.ExecuteNonQuery()
'If System.Threading.Interlocked.Increment(rowscopied) Mod 10000 = 0 Then
'Console.WriteLine("-- copied {0} rows.", rowscopied)
'End If
Next
End Using
destConnection.Close()
End Sub
View 6 Replies
View Related
Aug 5, 2015
I have a simple SP that returns 2 columns with 4 inner joins, results are about 100 odd rows max, nothing complicated. When I run the SP via SSMS it works fine, as soon as this is run via an application server the SP fails to complete with the error :
Internal error: An expression services limit has been reached. Please look for potentially complex expressions in your query, and try to simplify them.
We are not getting anywhere near the expression limit so I cannot understand why we are suddenly receiving this error. 2 weeks ago this query was running fine, no updates have been rolled out to the SQL database servers or application servers but the error is suddenly appearing on both prod and dev environments.
View 1 Replies
View Related
Sep 23, 1999
How to get result from Query by group of (n) rows ?
- Is cursors the better way (and the only) ?
-Is there something as ROWNUM in Oracle or LIMIT in MySql ?
Example plz !
Thanks.
Alex
View 3 Replies
View Related
May 23, 2001
I am a newbie to SQL Server.
I have a problem, in filtering the records returned by a query.
I have a table which contains 1 million records, it has a user defined primary key which is of character type.
The problem is i need to filter the output of a select query on the table based on two parameters i send to that query.
The first parameter will be the starting row number and the second one is the ending row number.
I need a procedure to do this.
For Eg:
MyProc_GetRowsFromBigTable(startRowNo,endRowNo) should get me only the rows in the specified range.
Thanks in advance,
Raghavan.S
View 2 Replies
View Related
Oct 29, 2006
Hi Folks!I have a strange thing happening; I have a field that Counts the number ofrecords and another field that shows the number of clients(Count(RecordID)=3 and NoOfClients=2) When I do a simple expression"Count(RecordID)/NoOfClients" the expected result should be 1.5. Insteadthe result I get is 1. Any ideas?Thanks!Rick
View 4 Replies
View Related
Nov 14, 2006
Hello,
We're trying to launch a SSIS package throw a webservice. This WebService loads a configuration file with "myPackage.ImportConfigurationFile(pathConfig)" and assigns values to some variables with "myPackage.Variables.Item(Parameters.Keys.Item(i)).Value = Parameters.Item(i)". Seems to work.
I we execute the webmethod of the WebService, this works but only when we execute first time, the SSIS finished succesfully. But when we execute a second time the Webmethod, we've a lot of failure with messages:
The result of the expression "@[User::Email]" on property "ToLine" cannot be written to the property. The expression was evaluated, but cannot be set on the property.The result of the expression ""The Import of " + @[User::ExcelFile]+ " is successful"" on property "MessageSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
Thx for your help
View 1 Replies
View Related
Jun 3, 2015
Is there a way of taking a result from a query and pulling out a certain account number and displaying those account numbers - as fred? Eg. I have a drop down of account number (s) however they pull from a table that only displays them as account numbers. I would like to give more a description to certain account numbers that are pulled. Eg. account number 234 will be fred and account number 555 will be sam etc. Trying to add it to the query on the dataset is complicated, so I was wondering if I created an additional blank field with an expression to be able to do this?Â
View 7 Replies
View Related
Feb 18, 2008
I´m creating a report in SSRS 2005 where you can filter after month and year. The result is the total sale for that particular month. What I want to do, is adding an extra column to compare with the result in the same month last year. F.eks. say that I choose january 2008 I would like to see the results for january 2007.
I thought of writing an expression to do that, but as that isn't my stronges side I would appreciate some help
View 3 Replies
View Related
Apr 10, 2007
Hi,
I am trying to import some 35-40 flat files into my SQL Database, however I don't want to imort all the data from each file, but just top 20 rows only for data quality check. Flat files are very huge so I don't want to import all of the data into my database.
Thanks,
gpat
View 1 Replies
View Related
Oct 27, 2006
I am running a package in which all tasks participate in a transaction. One task is a ForEach Loop container that executes 1 SQL INSERT statement per loop. The Loop runs well over 100 times in order to normalize a very, very, very wide table.
It seems that at a certain point, the Loop task will fail. I've tested a few different scenarios and they all fail at the same point... the 98th loop.
The error message is below:
[Execute SQL Task] Error: Failed to acquire connection "ADO.NET Connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I'm guessing that there is a limit to the number of connections that can be started at any one time. But I figured SSIS wouldn't start a new connection for every SQL command.
Any insight on this issue? Anyone have an idea for a work around?
View 2 Replies
View Related
Oct 23, 2007
Hi,
I want to pull sample records lets say 1000 rows only from oracle database to sql server. Is there any option in ssis to limit the number of rows?
View 4 Replies
View Related
Nov 28, 2007
I have a SSIS package that opens an xml file, puts the contents into a string, then runs a stored procedure that dumps it into an xml column in a table. One of the xml files is huge. Putting the data into a ssis string causes an error. The length of the string variable is 58,231,886. The file will only get bigger.
How else can I get this data into a SQL Server XML field.
View 1 Replies
View Related
Jan 12, 2012
I am using an oledb source. the query is coming from a variable. The database to which oledb source is connected is Oracle.Mt variable contains the following query:
"SELECT REQUEST_ID FROM COMPLIANCE_REQUEST
where LOAD_TMSTP between (select max(END_TMSTP) FROM BATCH_JOB_LOG) and
TO_DATE("'+RIGHT("0" + (DT_STR,4,1252)DATEPART( "dd" , @[System:tartTime] ), 2) + "-"+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mm" , @[System:tartTime] ), 2) + "-" +RIGHT("0" + (DT_STR,4,1252)DATEPART( "yy" , @[System:tartTime] ), 2) + " " +RIGHT("0" + (DT_STR,4,1252)DATEPART( "hh" , @[System:tartTime] ), 2) + "." +RIGHT("0" + (DT_STR,4,1252)DATEPART( "mi" , @[System:tartTime] ), 2) + "." +RIGHT("0" + (DT_STR,4,1252)DATEPART( "ss" , @[System:tartTime] ), 2) +'",'DD-MM-YY HH24.MI.SS')"
I am getting error as :
Error at Data Flow Task [OLE DB Source 2 [2177]]: No column information was returned by the SQL command.
Error at Data Flow Task [OLE DB Source 2 [2177]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4A.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E4A Description: "Command was not prepared.".
Error at Data Flow Task [OLE DB Source 2 [2177]]: Unable to retrieve column information from the data source. Make sure your target table in the database is available.
View 6 Replies
View Related
Apr 18, 2008
am trying to do the following in SSIS.
I have Execute Process Task, in which I have the values are set for Executable, Arguments and working Directory manually. I keep changing this if the Connection Manager points to Dev or when it points to QA or to Prod. Instead I want to do like this.
If my Connection Manager points to Dev, the Executale , Arguments and Working Directory should automatically change. Else if it points to QA, the Executale , Arguments and Working Directory should automatically change and similarly for Prod.
Is this possible in Expression Builder in Execute Process Task. If so, how?.
Thank you
View 1 Replies
View Related
Jul 19, 2007
Hi all of you,
That's an easy one. I've got a Send Mail task which might send a message in plain text along with a SSIS variable.
Something like that:
'La tabla "' + SUBSTRING( @[System:ackageName], 3,20) + "' se ha cargado correctamente'
TIA for that,
View 1 Replies
View Related
Dec 5, 2006
Greetings SSIS friends,
I have the following expression but it doesn't seem to evaluate
findstring(eventstatus, "O", 1) > 0 ? "OFF" : NULL(DT_STR, 30, 1252)
All I want to do is something like :
All I want to do is return a NULL value if my condition is false.
Your help would be appreciated.
View 3 Replies
View Related
Sep 15, 2015
I am working on a ssis package ,where I have date parameters as format below
"2015-09-01-00.00.00.000000"
How to get this date format in TSQl expression in SSIS package?
View 1 Replies
View Related
Jul 26, 2007
This works:
len ((DT_WSTR,2)DATEPART("mm", getdate()))==1 ? (DT_WSTR,1)0 + (DT_WSTR,1)DATEPART("mm", getdate()) : (DT_WSTR,4)DATEPART("mm", getdate())
This doesn't:
"dataware/"+ len ((DT_WSTR,2)DATEPART("mm", getdate()))==1 ? (DT_WSTR,1)0 + (DT_WSTR,1)DATEPART("mm", getdate()) : (DT_WSTR,4)DATEPART("mm", getdate())
I tried a couple of different things at this point, where am I missing the cast? Before len? Cast to what?
View 4 Replies
View Related
