SSIS Failure - Can Not Add A Row To The Data Flow Task Buffer
Apr 18, 2006
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 2 Replies
ADVERTISEMENT
Aug 10, 2006
Hi,
I am trying to transfer the data from flat file to sql server.When I am running the package on local server(network server) it works fine.But when I use it to transfer the data to online server it starts and shows 2771 rows transfered and remains on that only, dosent stop or give a error. When i stop the execution I get the following errors:
[DTS.Pipeline] Error: The pipeline received a request to cancel and is shutting down.
[Loose Diamond File [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "Loose Diamond File" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Can any one help me to find what the problem is.
Thanks in advance.
View 4 Replies
View Related
Jun 5, 2006
I have a package that runs fine by itself. But when I run it inside a Foreach Loop container on a parent package, I got a buffer error after a few loops. Here are a couple of the error lines:
A buffer failed while allocating 49085616 bytes.
The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
I already played around with the Data Flow task€™s DefaultBufferMaxRows and DefaultBufferSize properties, and I am still getting the error. Just wondering if there is a memory leak or something with the Foreach Loop task. I haven€™t install SP1. Maybe SP1 fixes this issue?
View 3 Replies
View Related
Mar 5, 2008
Hi Everyone-
i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
thanx
Maylo
View 5 Replies
View Related
Sep 7, 2007
I was working all day making changes to my 3MB package. I was adding a large number of transforms that were copied-and-pasted from elsewhere in the same data flow task.
All was going well. I even took the time to have SSIS lay out the task again (1/2 hour). Suddenly I started receiving some strange errors:
After the layout, I noticed two stray components 'way off in the upper right corner. I found that one of them had a duplicate name to a component which had been added hours ago. Even after deleting it, I got "duplicate name" errors.
I copied three components in one selection, and when I tried to paste them, got the error "can't initialize component on paste". I tried them one at a time, but got the same error.
I got errors about COM failures due to marshalling to another thread
I then exited Visual Studio and started it again. To my great surprise, the data flow task I was working on was still there, but was completely empty.
Comparing what I'm left with to my last version in source control, I find that the entire pipeline element is missing from the DTS: ObjectData element!
I'm developing a real love/hate relationship with SSIS. It varies from one day to the next. Guess what kind of day this is!
View 3 Replies
View Related
Sep 28, 2006
Hi, there,
I am having some problems with the loading of tab delimited text file (source) to a SQL Server table (destination) using the SSIS data flow task. Package has been executed successfully with no error msg. The number of rows in the text file also matches the number of rows in the SQL table. But, when I check the content of the table, I noticed some of the columns contain NULL which supposed to have value. This happens not to all the rows but only to some rows. I did some testing by removing some rows from the beginning, middle and end of the text file and re-run the package but the result is quite inconsistent. Sometimes, the field got filled, but sometimes, it just contains NULL where it supposed to have value.
What will be the possible causes to this?
Thanks in advance.
Regards,
Yong Hwee
View 2 Replies
View Related
May 26, 2008
Hi,
I am experiencing an error where the ssis data flow task would freeze and stop data export from a oledb source to a text file. It doesn't generate any errors the ssis package would just hang. This only happens when I run it in 64 bit mode. When I change the mode to 32 bit the ssis never freezes and runs fine. Has anyone experience this? Is there a fix so I can run my jobs in 64 bit mode?
Thanks,
View 5 Replies
View Related
Feb 29, 2008
Hi!
When I add a Data Flow Task to a package, save it and then close. When I open it again, I get 3 errors and the detail of the Data Flow Task is empty.
I had try to uninstall and install my SQL Server 2005, but the problem continues.
Can some one help me on this?
Sérgio Cardoso
View 4 Replies
View Related
Jan 29, 2008
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
View 6 Replies
View Related
Apr 13, 2007
I have a package that loads staging tables from an Oracle source DB. In the data flow tab I have 30+ read table/write table task combinations. When I run the package 3-4 of the read/write combos execute at a time. What I'm trying to control is the priority order of the combo execution. My goal is to minimize to total load time by having the larger table transfers run first and the smaller table transfers fill in until they are all complete. Currently, the largest table (16 million) transfers last (because it was the last combo that I created?).
Thanks,
Dave
View 1 Replies
View Related
Nov 28, 2005
I am creating a staging database in which I am loading required tables from 2 different sources.
I have 30 different tables to load from source 1 and 10 different tables from source 2.
This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task
has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data.
So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination.
I wanted to find out if this is the efficient way to do, or if there is any other way to do this.
And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps
as for Source 1 tables.
Please advice.
Thanks,
View 19 Replies
View Related
May 17, 2007
I have just installed Service Pack 2 on my SQL 2005 Standard Edition.
However, now all my SSIS packages will not allow me to open my Data FLow Tasks. I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Cannot show the editor for this task.
------------------------------
ADDITIONAL INFORMATION:
The task returned an unsupported control editor type. (Microsoft.DataTransformationServices.Design)
If I try to create a new Data Flow task I get:
TITLE: Microsoft Visual Studio
------------------------------
Failed to create the task.
------------------------------
ADDITIONAL INFORMATION:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
I have tried to install the latest hotfixes after this but they had no effect.
Can anybody help me???? Please?
View 10 Replies
View Related
Apr 11, 2007
I need to extract data to send to an external agency in their supplied format. The data is normalised in our system in a one to many relationship. The external agency needs it denormalised.
In our system, the parent p has p_id, p_attribute_1, p_attribute_2, p_attribute_3 and the child has c_id, c_attribute_a, c_attribute_b, c_parent_id_fk
The external agency can only use a delimited file looking like
p_id, p_attribute_1, p_attribute_2, p_attribute_3, c1_attribute_a, c1_attribute_b, c2_attribute_a, c2_attribute_b, ...., cn_attribute_a, cn_attribute_b
where n is the number of children a parent may have. Each parent can have 0 or more children - typically between 1 and 20.
How can I achieve this using SSIS? In the past I have used custom built VB apps with the ADO SHAPE command but this is not ideal as I have to rebuild each time to alter the selection criteria and and VB is not a good SQL tool.
View 4 Replies
View Related
Dec 4, 2006
Hi all,
I met a problem when trying to pass values to a SQL statement through parameters. It's a data flow task. I used the OLE DB connection. My statement is like the statement below(the real statement is little complex):
Select * from myTable where mydate>? and mydate<?
I used the "set query parameter" dialogbox to bulid two parameters varStartTime and varEndTime, the values for the two parameters were set to "1/1/2005" and "12/30/2006" respectively. But when I click the "Parse query" button, I got errors
Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command.
I have referred to the posts, but the problem still exists. Any help will be highly appreciated. Thanks a lot!
View 1 Replies
View Related
May 22, 2008
Hi All,
I have a requirement here to import data from XML file to SQL Database. The XML schema contains of various elements and one of the element is recursive ie. Parameter node contains parameter node within it and it can have n number of iterations. I have given the sample schema below:
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
</xs: sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Parameter">
...............
</xs: sequence>
</xs:complexType>
</xs:element>
</xs: sequence>
</xs:complexType>
</xs:element>
But all the nodes contain the data which has to be imported to a single table dbo.Parameters. I cannot use Union ALL since i dont know how many iterations I will have in the file. Is there any way to do this operation in Data Flow Task using XML Source? Can anyone help me on this?
Thanks,
Dhileep
View 1 Replies
View Related
May 31, 2007
I have an SSIS Package which is designed to import log files. Basically, it loops through a directory, parses text from the log files, and dumps it to the database. The issue I'm having is not with the package reading the files, but when it attempts to write the information to the db. What I'm seeing is that it will hit a file, read 3000 some lines, convert them (using the Data Conversion component), and then "hang" when it tries to write it to the db.
I've run the SQL Server Profiler, and had originally thought that the issue had to do with the collation. I was seeing every char column with the word "collate" next to it. On the other hand, while looking at the Windows performance monitor, I see that the disk queue is maxed at 100% for about a minute after importing just one log file.
I'm not sure if this is due to the size of the db, and having to update a clustered index, or not.
The machine where this is all taking place has 2 arrays- both RAID 10. Each array is 600 GB, and consists of 8 disks. The SSIS package is being executed locally using BIDS.
Your help is appreciated!
View 2 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
May 2, 2006
I get the following error when trying to import (have tried flat files, Excel & Access). I've searched but have not found a resolution. Any help is appreciated.
Jeff
Validating (Error)
Messages
Error 0xc00470b6: Data Flow Task: The LocaleID 0 is not installed on this system.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Source - Test1" (1)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
View 33 Replies
View Related
Jul 2, 2010
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
View 8 Replies
View Related
Jul 19, 2007
Hi all,
We are running SQL Server 2005 Standard edition on a Vista Business machine. Whenever we try to use DTS to import or export data we get this message:
The SSIS Data Flow Task could not be created. Verify that DTSPipeline.dll is available and registered.
Of course we have explicitly registered this dll and others.
Also we reinstalled SQL Server (and did it again. And did it again).
And we did the same for Visual Studio Standard (and again).
Any ideas in this elaborate group?
Thanks,
Tjerk
View 5 Replies
View Related
Jan 2, 2007
Hi Guys,
I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.
Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.
I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.
Any suggestions how I can get it to load the full data?
Thanks
View 26 Replies
View Related
Jun 4, 2015
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
View 3 Replies
View Related
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
View 17 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Oct 2, 2007
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
A.
View 14 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Dec 20, 2007
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
View 4 Replies
View Related
May 11, 2015
Data flow A take data from the Excel File A, Data B from Excel File B, Data C from Excel File C. What I'd like to do is that if something goes wrong on Data Flow A I would be alerted but the package should continue to running. The same for the DataFlow B, if A it's ok go on, if B fail send me the mail but continue until the end (so running the Data Flow C).
View 2 Replies
View Related
Feb 23, 2007
Hi,
I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.
If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.
How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task
Thanks
View 3 Replies
View Related
Nov 12, 2007
Hi Guys,
This is a question to the SSIS development team. I would like to know what are the requirements to implement custom SSIS Control Flow task in C++ . There is a documentation describing the process when implementing a managed task, but no such documentation exists for implementing a task in C++.
Thank you,
Ivan
View 10 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Aug 2, 2007
Hi,
I am working on my own data flow source component. Here is a fragment of this component code:
public override void PrimeOutput(int outputs, int[] outputIDs, PipelineBuffer[] buffers) { PipelineBuffer selectedBuffer = buffers[0]; string message; while ((message = GetMessage()) != null) { selectedBuffer.AddRow(); selectedBuffer.SetString(0, message); // how to flush data here? } selectedBuffer.SetEndOfRowset(); } private string GetMessage() { // we are retrieving some message here, this is a long-term process }
When a new row is added by this component to the buffer then this row is not immediately available to the next component in data flow. It is possible to configure SSIS in that way that each row is immediately sent to the next data flow component? If no also please inform me about that.
Thanks,
Rafal
View 5 Replies
View Related
Apr 22, 2015
The Database Trasnfer Task has failed with the following error......failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 9 Replies
View Related
