SSIS: For Each Loop: Destination Error
Feb 19, 2007
Hey Guys.
I am new to using SSIS and need some assistance. I am trying to create a package that will loop through a folder of DBF files and import them into SQL server. Here is what I did so far:
- Created a Foreach Loop Container with a Data Flow Task within
- Created a string variable to store the file names
- Created the OLE DB Source and Destinations
- Created the connection manager with dBASE III Extended Property pointed to the folder where the files are.
When I try to set the OLE Source to use the file name variable, I get an error stating that there is no Destination table defined. I get the same error when I try to setup the OLE Destination. How do I resolve this issue? I want it to import each file into its own table. Is there any way to reuse this file name variable as the destination table name?
Any help would be greatly appreciated.
Thanks!
-Michael
View 1 Replies
ADVERTISEMENT
Aug 1, 2006
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
View 21 Replies
View Related
May 16, 2008
Am new to SSIS and developing a component which pulls data from a staging table and drops them into another table in the same database.
Am using a
1) OLE DB Source to get the data from the staging table.
2) OLE DB Destination to insert or push the data into another table of the same database.
3) Script component to get the error rows and to update the staging table column with a flg value.
The rows that throw an error like primary key violation, or any other error should be redirected to the script component and the process should get completed.
The Error Output of the OLE DB Destination doesnt show any columns to be selected for Redirect Row option
The script executes without any error and the records are shown in error path but the records are not updated in the DB.
This is what i have in the script
Public Class ScriptMain
Inherits UserComponent
Dim sqlConn As SqlConnection
Dim sqlCmd As SqlCommand
Dim connMgr As IDTSConnectionManager90
Dim txnIdParam As SqlParameter
Dim errorDescParam As SqlParameter
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
connMgr = Me.Connections.ErrorConnection
sqlConn = CType(connMgr.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlCmd = New SqlCommand("UPDATE STG_TRANSACTION SET ERROR_FLG='Y' AND ERROR_DESC=@errorDescParam WHERE TXN_ID=@txnIdParam ")
fueltxnIdParam = New SqlParameter("@txnIdParam", SqlDbType.BigInt)
errorDescParam = New SqlParameter("@errorDescParam", SqlDbType.VarChar)
sqlCmd.Parameters.Add(errorDescParam)
sqlCmd.Parameters.Add(txnIdParam)
End Sub
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
sqlCmd.Parameters("@txnIdParam").Value = Row.TXNID
sqlCmd.Parameters("@errorDescParam").Value = Row.ErrorCode
End Sub
End Class
Pleas let me know the solution and any help will be appreciated.
View 3 Replies
View Related
Jul 11, 2006
ts my first time trying to set up a SSIS job using the import/export wizard to export the results of a query into an excel file.
i am using sql server 2005, windows XP SP2.
In the last step in the excel destination editor, in the connection manager when i am trying to select the excel file to write into i am getting this error.
'Microsoft.Jet.OLEDB.4.0 ' provider is not registered on the local machine.
I have set up the excel connection manager. i have changed the properties of the project to set
the Run64BitRuntime to false.
i am running the latest version of MDAC 2.8 on the machine too
please let me know if there is anything else i need to do to fix this.
thank you in advance
View 1 Replies
View Related
Jun 25, 2007
I have created a package which transfers data from a SQL server source to an Excel Destination. The DataFlow Task works fine , if i pre-define the column names in the Excel Destination... But i run into an error when i give the blank excel sheet as my destination. I am unable to map any columns
A sample example is as shown above .. In the column mappings field only one column in the Excel shows up for mapping and eventually throws the error "[Excel Destination [42]] Error: The number of columns is incorrect. "
How do we proceed in this case , where in we do not want to give pre-defined coulmn names in the Excel Destination sheet.
Thanks,
D
View 4 Replies
View Related
Apr 5, 2006
Hello All,
I am developing a package using SSIS which needs to do the following.
1. Read all flat file from a folder. I am doing this using For Loop task. I know the total number of files in that folder hence I am setting the loop counter = file count.
2. The next step is to import the data from flat file to SQL server destination table using data flow task.
3. Upon successful completion of data flow task there are some other tasks like SQL to do some checks/validation on the data, export it to another tables.
Upon successful completion of step 3 the iteration goes to next file.
I want to achieve the following
IF step 2 has error (for example corrupt file or incomplete data), I want to fail data transfer completely, skip step 3, and go to step 1 for next available file and do rest.
How do I do this in SSIS?
Thanks for your help.
SGK
View 1 Replies
View Related
Jul 11, 2007
I have a csv file in which I am reading into a recordset destination and want to than use a foreach loop to cycle through those records and do some things. The problem I am having is after defining the variable name of the records set as results, and than going into the foreach loop, choosing collection, using the foreach ado enumerator, i dont see anything in the dropdown under ado object source varable?????? I am new to SSIS but I basically want to parse through this file, change some columns in each line and than either update or insert data in a sql table.
View 4 Replies
View Related
Jul 27, 2007
Hi,
My procedure to implement a task is like this
I will be using execute SQL task to fetch the records from source,after this wanna use For each loop to access each record one at a time,perform some trnsformations and insert that record into destination.
Help me in accessing the data stored in the Variable(SQL task) in Dataflow task of foreach loop.
View 10 Replies
View Related
Mar 3, 2006
I'm curious to know how other people are handling the Recordset Destination in to be processed by a Foreach Loop Container. It seems a little odd to me that you can only map the parameters by knowing the index of the columns of the Recordset, however, the order that you built the recordset destination doesnt stay the same. I've been debugging for a while to find out that after I saved my recordset destination the order of the fields changed. To some order without a clear logic. I'm going to guess it might be the lineage id.
The bigger problem was this was a really large record set with 60 or so columns. To try and debug the problem of finding the indexes, I had added a Multicast tranform and saved the output to an Excel Destination. Of course, the order I setup the Excel file was the order I got the fields. Why would this not be the case with the Recordset Destination?
View 4 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
May 14, 2007
I read that Integration Services does not come with built-in support for ODBC destinations, so I tried to write Script component as destination task.
My destination is odbc for oracle, and it failes with the message:
"Null password given, logon denied".
I can't understand it, I used with the same connection with datareader source and it works.
I spent a long time on this problem, please help me.
Thank you in advance
Noam
View 5 Replies
View Related
Aug 10, 2005
Hi!
I have a problem that stops me from using Integration Services as THE ETL tool.
My goal is to load a data warehouse type of a database. The database is MaxDB (former SAP DB), but this is not the point. Let's take ANY ODBC compliant DB and assume all I have is ODBC driver - no OLE DB driver.
I figured out how to read from ODBC source (using Data Reader and ADO.NET provider for ODBC).
Now my question is how do I output/write my data into ODBC source? When I try to use OLE DB Destination it does not give me an option to use .Net Provide for ODBC. I tried other "destinations" with no luck.
I use this version of SQL Server 2005: (Microsoft SQL Server 2005 - 9.00.1187.07 (Intel X86) May 24 2005 18:22:46 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
Please, help!
Dima
View 82 Replies
View Related
May 16, 2007
Hello -
I am dealing with SSIS in VS 2005... Trying to convert all my DTS packages... So, basically all my packages will extract some information from a database and load the results into a spreadsheet.
To start I am trying to do a TOP 1 returning a string from the db... The first row has column names but mysteriously the package will start to write the expected results in the third row instead of the second one. The second row will remain blank and if I do a preview against the destination spreadsheet within the pkg I will see a NULL value in the second row and then in the third row I will see the string I was expecting.
Tried the following with no success:
Regedit.exe, in Hkey_Local_Machine/Software/Microsoft/Jet/4.0/Engines/Excel/ do TypeGuessRows=8, ImportMixedTypes=Text, AppendBlankRows=0, FirstRowHasNames=Yes
Any help would be really appreciated.
View 15 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Apr 15, 2008
i am transfering the table from one database to csv file format..i did it.. again i want to shift that csv files to another databse as tables. how to do this task.. pls help me.. its very urgent..out TL had given me the dead line.. send reply soon....
View 5 Replies
View Related
Nov 29, 2006
Hi All,
In Migrating from DTS to SSIS we have scenario where data from OLE DB (SQL Server) is inserted into ODBC source (transoft driver). In case of DTS, ODBC component was provided. For SSIS we used the Destination Script Component and programmatically used the ODBC related calls to design similar functionality. However we are getting the following error €“
Error[42000][Transoft] [TSODBC][usqld] Name expected@
However the same program pointing to Microsoft Access ODBC driver works fine.
Any help in this direction will be greatly helpful.
Thanks,
S Suresh
View 2 Replies
View Related
Nov 28, 2007
Hi,
I have a doubt regarding SSIS data destinations. I have a word document which is stored in the sql database table as varbinary(max). I want to fetch that doument and load it into word document through ssis.Is it possible?If so,how to do it?
One more question regarding data destination..I have created an interface to execute the ssis package from asp.net application.The package will be run by sql server agent.The question is is there any way that the package output will be shown on the local machine rather than host machine(which has interface and package).
Thanks..
Have a gr8 day.
View 7 Replies
View Related
Nov 14, 2005
Hi, I try to add a new SQLMOBILE Connection.
View 6 Replies
View Related
Nov 29, 2007
I am trying to migrate database from old structure to new structure usign SSIS.
The table in new db have extra field that i need to assign it using variable. this is because i have few customer that having different variable value. (meaning for 1 customer, the variable will be fix for all the tables in the database)
my question, without using the Execute Sql Task, can i assign the variable into the the old db destination?
eg my data flow Task is : OLE Db Source - Derived Column - OLE DB Destination.
Example data
Old structure (key = txnID)
---------------------
TxnID
ChequeNo
Bank (chq Bank - Bank in Bank)
Amount
New Structure (key = TxnID & CoCode)
-------------------------
TxnID
ChequeNo
ChqBank
BankInBank
Amount
CoCode
TQ.
View 6 Replies
View Related
Jun 6, 2006
I would Like to know whether anyone tried to SSIS from SQL to AS400.
I am getting Exception when I set destination adapter ( for As400).
Whats the acceptable value .
View 1 Replies
View Related
Sep 10, 2014
I have just set up an SSIS package similar to this URL....I have 5 connections in a SQL table which i want to loop through, set each string to be a connection string in the package (variable ConnString) and run a select to pull back information and store in a central table.
The package runs successfully and connects to 5 instances, but it connects to the same instance each time, my local one which is set as the value for variable used for the connection string. How is the Connection string supposed to get passed from the @SourceList variable to the @Connstring variable? Its clear what the problem is, as the results of my query as step one which pulls back all 5 strings just isnt getting populated from @SourceList into @Connstring one by one.
SSIS package =
1) SQL Task - Select connection strings from SQLTable and store results in @sourcelist
2) for each loop - ADO Enumerator, rows in first table @Sourcelist
3) data flow task within the loop - OLE DB Source, dynamic connection as connection manager, running the query i want from a variable, with the destination set to my central database.
View 3 Replies
View Related
Mar 12, 2008
Hi,
I am using For each loop container in my SSIS package which will loop through more than one input file in the input folder.
All the input files in the input folder are picked by one by one. All the input files in the input folder are executed with the same ExecutionInstanceGUID.
Now, my requirement is to get a new ExecutionInstanceGUID during the execution of each input file in the For each loop container. My package only contains the For each loop container with some logic inside that.
Please let me know if any one can help me for the same.
Regards,
Sriram.
View 6 Replies
View Related
Jan 24, 2008
Hi All,
I have a SSIS package which contains For Loop Container. when a task in the for loop container fails iam setting loop value to 0, even though iam not able to exit the loop. can some help me
Note: when ever the a task in the Loop fails the loop should stop and package should stop.
View 3 Replies
View Related
Aug 13, 2007
WHAT IS THE USE OF THE FOR LOOP CONTINER
PLEASE GIVE ME THE EXAMPLE
REGARDS
KOTI
View 5 Replies
View Related
Apr 9, 2007
How do I delete records in the destination file in SSIS using BI Development Studio?
View 1 Replies
View Related
Apr 10, 2007
How do I delete records in the destination file in SSIS using BI Development
Studio? Thanks.
View 3 Replies
View Related
Apr 11, 2008
Hello,
I have created a SSIS package which is getting data from SQL Server table to Excel File.
Step 1 : using Oledb to get records.
Step 2 : created Excel Connection and Excel Destination component
Step 3 : Configured the Excel File Path using variables.
Step 4 : Changed the property 64 bit FALSE
When try to run from BIDS it is running fine.
But
It is not running when try to run from SQL JOB.
The following Error i got:
: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. ::: component "Excel Destination" (588) failed validation and returned error code 0xC020801C. ::: One or more component failed validation. ::: There were errors during task validation. ::
Kindly give solution ASAP.
Thanks
Thiru
View 7 Replies
View Related
Nov 20, 2007
I have a Dataflow task with oledb source that is using SqlCommand to retrieve data and oledb destination to write the source output to a table. I have access to both the source and destination databases.
The problem is the destination component is not writing any rows to the destination table eventhough the Source component is returning rows (I can see them in the Preview and the source database table as well).
I'm using "Table/View Name from Variable" for destination.
The Package executes without any errors but there is no output.
Any ideas?
Thanks.
View 7 Replies
View Related
Apr 26, 2007
Hi,
I am using VS.net 2003 as a front end and SQL server 2005 backend.
i am creating SSIS packages for Datatransformation programically in .NET.
but the package created is compatible to the previous version of SQL server ie SQL server 2000.
So i need to migrate it in SSIS package compatible to SQL server 2005.
it is migrate also using Data Transformation migration wizard.
But i want to migrate my DTS package programically or by using stored procedure.
Is there any stored procedure or any code is there from which i can migrate DTS into SSIS ?
Thank you
View 9 Replies
View Related
Jul 24, 2006
Hi
I am trying to use a conditional split task so that I can check for specific fields. If the value doesn't exist I am piping the records to a derived field task, where I add an error. I then try to send these records to a flat file destination so that I can keep track of them. However, when I execute the SSIS data flow task I get the following error
[Log Invalid Records [5496]] Warning: The process cannot access the file because it is being used by another process.
This file isn't being used by any other process as far as I can tell, and the only process using it is the SSIS task trying to write to it.
If anyone has any ideas, then I would really really appreciate it
Thanks
Darrell
View 12 Replies
View Related
Sep 20, 2006
Hello....I have just installed the trial copy of SQL 2005 server and updated with SP1 as well as post SP1 hotfixes.
However, when I try doing sample training material on SSIS, if I try to output to any type of destination output (flat file, excel, access, localhost SQL database) it always does a SQLDUMPER on me and never finishes....I always have to stop the debugger to get out of it.
What pointers can be given to troubleshoot symptoms given above ?
Thanks.
SQLSSIS
View 2 Replies
View Related
Sep 11, 2007
Hi folks,
We have a nice issue here. We are running SQL 2005 Dev edition Service Pack 2 and we are trying to copy the contents of one table in a local sql server database to another table in another database on the same local sql server. We use an oledb source and a sql server destination. The table structure is exactly the same. One column is of the datatype ntext, when we try to load the contents the package will stop with the error:
OnError 11-9-2007 14:38:24 11-9-2007 14:38:24 00:00:00 The attempt to send a row to SQL Server failed with error code 0x80004005.
OnError 11-9-2007 14:38:24 11-9-2007 14:38:24 00:00:00 SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "<TABLE>" (3382) failed with error code 0xC02020C7. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
OnError 11-9-2007 14:38:24 11-9-2007 14:38:24 00:00:00 SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC02020C7. There may be error messages posted before this with more information on why the thread has exited.
OnError 11-9-2007 14:38:26 11-9-2007 14:38:26 00:00:00 SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E07 Description: "Error converting data type DBTYPE_DBTIMESTAMP to datetime.".
OnError 11-9-2007 14:38:26 11-9-2007 14:38:26 00:00:00 A commit failed.
Removing the column from the sql server destination will result in loading the complete table. Using an oledb destination instead of sql server destination fixes the problem. Is this a bug in the SQL server destination component?
Thanks,
Marc
View 4 Replies
View Related
Oct 3, 2007
Hi,
Here is my problem :
I work on a SSIS package with SQL SERVER 2005
I need to extract data from a table and put these data in csv files
But... the flat files name should be dynamic and assigned by a variable ...
Here's an example of my table :
Column header :
Id, Name, Number
1 TOM 22
2 TOTO 44
3 SAM 44
4 RADIO 55
I expect to have 3 csv files :
USER_22.csv
USER_44.csv
USER_55.csv
for example : USER_44.csv contains :
2;TOTO;44
3;SAM;44
if there's 50 different number, i expect 50 files
can i do that in a dataflow ?
thanks for answering
View 8 Replies
View Related
