SSIS - For Each Loop With Insert In Execute Task Failing
Oct 19, 2015
I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.
However, when actually running the process I am getting the error message:
Executing the query "INSERT INTO dbo.TEST_TABLE
..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.
My insert statement looks as follows:
INSERT INTO dbo.TEST_TABLE
(IID, AN8, File_Type, IB_OB, File_Name, Processed_Flag, ReceiptDateTime)
VALUES
(
'1111',
'123',
'888',
'IB',
RIGHT(LEFT(?, LEN(?) - 4), LEN(?) - 24),
'I',
GETDATE())
View 0 Replies
ADVERTISEMENT
Sep 10, 2007
Hello All
I was trying to insert some row from one table to another of different database.
I was using Execute SQL task along with Foreach loop container.
In my execute SQL task I am using this query
SET IDENTITY_INSERT dbo.Table1 ON
INSERT INTO dbo.Table1
SELECT * FROM DB2.dbo.Table2
WHERE TableKey = ?
When executed I get this error:
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
While the same query when executed in Management Studio Its successful.
The properties I set
For Each Loop Editor Settings:
1) Collection: a) Enumerator Set to ForEach ADO Enumerator
b) ADO Object Source Variable: User:bjectVariablename
c) Checked Rows in the first table
2) Variable Mapping: New Int Variable2 and Index = 0 to set it to first colunm.
3) Expression: Left blank
Execute SQL Task Editor:
1) General: a) Timeout : 0
b) CodePage: 1252
c) Result Set: None
d) SQLSourceType: Directinput
e) SQL Statement: SET IDENTITY_INSERT dbo.Table1 ON INSERT INTO dbo.Table1 SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ?
f) BypassPrepare: False
2)Parameter Mapping: Variable Name : New Integer variable2 selected
Direction: Input
DataType: Long
ParameterName: 0
Can somebody help me in this regards.
Reference:
a) http://www.whiteknighttechnology.com/cs/blogs/brian_knight/archive/2006/03/03/126.aspx
View 10 Replies
View Related
Jun 9, 2006
Here's the set up:
ForEach Loop Container:
Collection: Foreach File Enumerator
Variable Mappings: Variable = User::DailyFile, Index = 0
Execute SQL Taks:
Connection: OLEDB
ResultSet: None
SQLStatement: EXEC spGetFile ?
ParameterMapping: VariableName = USER::DailyFile, Direction = Input, DataType=VARCHAR, Parameter = 0
This works great it iterates through a file and looks at all the files checks to see if they have been loaded into the db table, if not it loads the file.
My spGetFile has RETURN 1 if a file is loaded and RETURN 0 if the file is not loaded.
Now I add a new variable:
Step 1: add to Foreach Loop Container
ForEach Loop Container Name = Return, Scope = ForEachLoop, Data Type= Int32 Value=0
Step 2: Add to Execute SQL Task:
VariableName = User:Return, Direction = ReturnValue, DataType = Long, ParameterName =1
This produces the following error:
~~"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.~~
I tried with an ADO.Net connection ... works until I add the ReturnValue parameter ...
Any ideas??
Thanks
View 4 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
May 9, 2007
Inside of an SQL Task (below), I have a call to a stored procedure with 7 parms.
[Audit].[spBatchPackage_OnExtract] ?, ?, ?, ?, ?, ?, ?
User:: ParentExecution_Idx Long
User:: Batch_Idx Long
System:: PackageName Nvarchar
System:: PackageID GUID
User:: TargetTable Nvarchar
System:: ContainerStartTime DBTimestamp
User:: DataFilePattern Nvarchar
In my SP I have this:
ALTER PROCEDURE [Audit].[spBatchPackage_OnExtract]
@Execution_Idx int
,@Batch_Idx int
,@Source nvarchar(1024)
,@SourceId uniqueidentifier
,@Destination nvarchar(1024)
,@StartTime DATETIME
,@FileSpecification nvarchar(2)
When I execute the SQL Task, I get this error:
[Execute SQL Task] Error: Executing the query "[Audit].[spBatchPackage_OnExtract] ?, ?, ?, ?, ?, ?, ?" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any help on clearing up this error would be appreciated!
View 12 Replies
View Related
Mar 21, 2001
I'm running SQL Server 7.0 SP3 and having trouble with DTS.
I have an Execute SQL Task that runs several stored procedures. When one of the stored procedures fails, the Execute SQL Task just terminates without failing.
I found a knowledge base article (Q238523) dealing with this situation but it was supposedly fixed in SP2 - I have SP3! The other work around suggested, issuing a SET NOCOUNT ON, does not always work.
Has anyone else run into this or have any other suggestions.
I hate the thought of spending days doing another work around in order get basic DTS functionalty to work as it should!
Thanks!
Jerry Dunn
gdunnjr@yahoo.com
View 2 Replies
View Related
Dec 1, 2015
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
View 13 Replies
View Related
Jul 10, 2007
Hi all,
I got this problem and before post I've read many post similar in the forum (sorry for my english I try to do my best....i'm italian)
This is my scenario.
1) SQL
SELECT
UPPER(SUBSTRING(FileImportazione, 7, 50)) AS str,
Id
FROM Sources
WHERE (TipoImportazione = 0)
This is an SQL task and from this I create a Object variable "ObjDs" on scope package1
2) I introduce a loop (Foreach ADO Enumerator) on my object variable "ObjDs".
Here I mapping two variables "IDsources" and "str" (as you caqn see from my first sql)
Now I set a breakpoint into the beginning of my cicle and really see the dinamic change of the values from "watch" windows.
Now start my problem.
Into this loop I must do "X" operation....but first of all I must Update a table...so I simple SQL TASK...on the dinamic ID of my variable.
Ok, I put a SQL tast into the loop, set SQLsourceType = Variabile, resulset = none, and create an expression like this (SQLstatementsource):
"UPDATE New_pangea.dbo.Sources SET InAggiornamento = "+ (DT_WSTR, 4) @[Utente::IDsources]
If I don't cast (DT_WSTR, 4) I got always an error...
The data types "DT_WSTR" and "DT_I4" are incompatible for binary operator "+". The operand types could not be implicitly cast into compatible types for the operation. To perform this operation, one or both operands need to be explicitly cast with a cast operator.
Attempt to set the result type of binary operation ""UPDATE New_pangea.dbo.Sources SET InAggiornamento = " + @[Utente::IDsources]" failed with error code 0xC0047080.
so I put and validate myexpression.
before my global variable @[Utente::IDsources] change the value to true of EvalutateAsExpression.
Something goes always wrong...When I try debug...this is the error
Errore in Execute SQL Task: Failed to lock variable "UPDATE New_pangea.dbo.Sources SET InAggiornamento = 0" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Errore in Execute SQL Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Hope someone can help me, thanks Alen
View 2 Replies
View Related
Apr 24, 2006
hi guys,
i'm trying to do a bulk insert through a t-sql which accepts 3 params.
i frist run a SQL statement to get a list of DB's to update through a SQL task, then i save the output to a variable object. which is been used by the For each loop.
i've done the mapping with the object fine. but i want to call a SQL task within for each loop, and parse the above results as parameters. i tried parsing it as
exec mysp3 @[User::fundid], @[User::dbCode], @[User::subfund]
where fundiid, dbcode and subfund are user defined variables that gets updated by the ado recordset.
this fails with the error msg:
SSIS package "SP test.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec ConnectODBC @[User::fundid], @[User::dbcode], @[User::subfund] failed with the following error: "Incorrect syntax near 'User::fundid'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Shred the contents of the variable: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SP test.dtsx" finished: Failure.
i also tried
exec mysp3 ?, ?, ?
then mapping the inputs still doesn't work
same thing with
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec ConnectODBC ?,?,? failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
View 3 Replies
View Related
May 3, 2007
Okay, can someone explain why when I execute children packages within a loop that only a couple of them work?
When I first started this I had Child Package 1 and Child Packge 2 working from the Parent Package 1. It would loop through twice (I had 2 organizations in my outer loop) and pass in the Parent Package variables correctly.
I am using a simple "Foreach Item Enumerator" with a collection of string enumerators that are the Names of the children packages - these are assigned to a variable that is scoped to the outer loop.
Now, when I add a new Child Package 3 and set it up the same as the other 2, when it goes to execute Child Package 3 it fails with the error:
"Error: The connection manager "[My Package Name].dtsx" is not found. A component failed to find the connection manager in the Connections collection. "
What in the world have I done? I was under the assumption that since the first 2 packages worked, that any other packages I added would work the same.
View 3 Replies
View Related
Feb 15, 2008
Hi, I'm trying to loop thru a table and insert records into another table in ssis. So far I have been able to get the data using a execute sql task set up to store the full result set into a variable called data. I then drug a foreach loop container out and selected the foreach ADO enumerator and used my variable data as the ADO object source variable. I then set up a new variable under variable mappings with index 0 to get the collection values. How do I take that variable and update another table using another sql task inside the foreach loop container? Is this possible?
thanks,
View 8 Replies
View Related
Feb 27, 2008
Hi all,
I'm trying to capture the file name and insert to the Database with Loop Container and Execute Sql task...However when I run, I get error with the input parameter.
In my Sql Task, the parameter mapping:
Variable name: user::variable,
direction: input,
Data Type: Varchar,
parameter name: @xVariable,
parameter size: -1
connectiontype: OleDB
sourcetype: direct input
statement : insert into xtable(xcolumn) values(@xVariable)
Anyone have any other suggestion how to capture the filename and input in the database?
thanks
View 4 Replies
View Related
Jan 8, 2008
Hi,
I am trying to use SSIS.Execute Process Task within Foreach loop . The task should unzip a a variable gzip file provided to it from the previous task
to execute the command from cmd C:Program FilesGnuWin32ingzip.exe -d -k c:folderfilename
My input in the Execute Process Task as follow:
The command line: C:Program FilesGnuWin32ingzip.exe
Argument: -d -k c:folder
Variable: User::var_filename
keep getting error
The process exit code was "1" while the expected was "0".
Thanks
View 3 Replies
View Related
Mar 21, 2007
Hi:
I am a R data miner who is new to SQL and SSIS and would appreciate any help.
I wanted to automate the process of creating and processing decision tree models for every county in the Country. I wanted to use the foreach loop for iterate through all the counties. I wanted the foreach enumerator to be used by the XMLA code that creates the model so it would append it to the name of the model and i would get a different model for every county. I am not sure how to have the XMLA code accept foreach loop enumerator.
Any help would be greatly appreciated and if you could direct me to a previously done example that would greatly benefit me.
Thank you
avneet
View 1 Replies
View Related
Jul 19, 2007
hi
I am trying to execute a UDF in an Execute SQL Task within a Foreach loop.
I have an Execute SQL task to get the dataset (Firstname, Lastname, CompanyID) which is going into a full result set called @PendingPar. The Foreach Loop is set to a Foreach ADO Enumerator against @PendingPar and I have created 3 variables at the Foreach Loop scope level called @Firstname (String), @Lastname (String) and @CompanyID (Int32). These are mapped in the Foreach Loop as index 0,1 and 2.
Within the Foreach Loop I have an Execute SQL Task with the sql command
select dbo.udf_GetParTitle (?,?,?)
In the parameter mapping I have Variable Name = User::Firstname Direction = Input Data Type = VARCHAR and Parameter Name = 0, User::Lastname, Input, VARCHAR, 1 and User::CompanyID, Input, VARCHAR,2
Finally the UDF returns a @NewPar value so i have the result set in the execute sql task to Single Row which goes into variable @NewPar. This @newPar will be used later but I cannot get the first bit to work yet.
the error message i get back is
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "select dbo.udf_GetParTitle (?,?,?)
" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task 1
the initial execute sql task where the dataset is selected works fine but it is within the foreach loop that it fails.
any help gratefully recieved
View 6 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Jan 18, 2007
Hi ALL,
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
Please help.
Thanks.
Regards,
Salil
View 1 Replies
View Related
Dec 18, 2007
Hi Guys
The problem is...
When i try to bulk insert a single file its working fine. When i want to loop a set of files in a folder and use Foreach Loop and BulkInsert Task...its failing..
In the flat file connection When i specify usage type as existing file...its loading the same file "n" number of times where n is the number of files in the folder.
When i select usage type as existing folder i get error " Cannot bulk load because the file "....folder" could not be opened. Can someone help me out with this?
I have sql 2005 as as separate instance...beside my 2000 which is default
Thanks!
View 9 Replies
View Related
Jun 7, 2006
How can i insert data into an excel sheet using an Execute Sql Task? is it possible?
View 1 Replies
View Related
Jun 26, 2007
Is it possible to CREATE a database using SSIS and name it using a variable / parameter mapping.
if not, how can I use SSIS to take a username from a database table and create a database with that name?
thanks is advance....b
View 10 Replies
View Related
Sep 12, 2007
A stored function is created in MySQL Server running on Linux with following info:
mysql > delimiter $$
mysql > CREATE FUNCTION GetMaxKeyForSampleTable()
-> RETURNS DOUBLE READS SQL DATA
-> BEGIN
-> RETURN (SELECT MAX(MJD) FROM tblSampleTable);
-> END;
Query OK, 0 rows affected (0.02 sec)
mysql > delimiter ;
***The above function is successfully stored in the database.
"Execute SQL Task" add-in module has following info:
Name: Execute SQL Task
Description: Execute Task
TimeOut: 0
CodePage: 1252
ResultSet: Single row
Connection Type: ADO.NET
Connection: .MySQLServerLinux
SQLSourceType: Direct Input
SQL Statement: SELECT GetMaxKeyForSampleTable() AS MaxKey
IsQueryStoredProcedure: True
ByPassPrepare: False
Result Set:
Result Name Variable Name
MaxKey User:_dMaxKey
The following steps are taken:
1. Clicked "Parse Query" push button which results a pop-up dialog box -
"The query parsed correctly".
2. Clicked "OK" button.
3. Right clicked "Execute SQL Task" add-in module.
4. Selected "Execute Task".
"Execute SQL Task" changed its color from white to yellow to red
which means excution failed.
Please help me to figure out what should be done to make the excution successful.
Thank you very much in advance.
Paul Cho
View 4 Replies
View Related
Jul 23, 2007
Hi
Got a problem with 'Execute SQL Task'. When I click to open the 'Execute SQL Task Editor', add a connection then click on 'Parameter Mapping' then click 'Add' button the window disappears. I have re-installed visual studio and applied SP1 but the problem is still there.
Any Ideas?
Nickie
View 1 Replies
View Related
May 8, 2006
Hi!
I want to make an Execute Process Task that will make a connection with VCP.exe (Secure FTP from SecureCRT, you need to install all components from SecureCRT to have this one. It also fixes your system paths so you dont need to include the working directory).
In Expression Window i managed to create an expression that will create the connection string that looks like this:
"vcp.exe -pw password username@222.222.222.222:/home/username/tickets/" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000" + " c:\DATA\" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000"
Which forms something like that :
vcp.exe -pw password username@222.222.222.222:/home/username/tickets/grnti_200605080000 c:DATAgrnti_200605080000
Connection string works perfectly while testing in cmd.exe or directly running with Run..., but within SQL SSIS i get the message :
SSIS package "Package.dtsx" starting.
Error: 0xC0029153 at VCP to Srv, Execute Process Task: File/Process "grnti_200605080000" does not exist in directory "vcp.exe -pw password username@222.222.222.222:homeusername icketsgrnti_200605080000 c:DATA".
Error: 0xC0024107 at VCP to Srv: There were errors during task validation.
SSIS package "Package.dtsx" finished: Success.
Now this message seems a bit odd, because im only trying to run an application with all the arguments with it.
Anyone experienced anything similar, or should i use another approach on this one?
Thanks!
Sebastijan L.
Ok ! Problem solved, will keep the thread as it might be usefull to someone else.
I changed the expression from Executable to Argument cut the "vcp.exe" out and it works like a charm!
View 1 Replies
View Related
Aug 20, 2007
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100)
SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName)
SELECT
@Server,
role.name,
member.name
FROM
sys.server_role_members rm
inner join
sys.server_principals member
ON
rm.member_principal_id = member.principal_id
inner join
sys.server_principals role
ON
rm.role_principal_id = role.principal_id
********Begin Errors***************
" failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task I
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'.
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
View 4 Replies
View Related
Feb 19, 2008
I am trying to create an SSIS package to transfer data from one database to another. Prior to transfering the data I want to delete the existing data in the target table. When I try to configure the task I get this message:
The task with the name "Execute SQL Task" and the creation name "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" is not registered for use on this computer.
Contact Information:
Execute SQL Task
Prior to installing .NET 3.0 I did not have this problem. Any thoughts on how to resolve this problem? My thought is there was an installation registration issue.
Thanks in advance for your help.
scsmith
View 4 Replies
View Related
Mar 12, 2008
Hi
I need to use a variable as column in SQL statement in Execute SQL task of integration services. I am setting Parameter Setting to map variable use it in the query like; select ? , col1name from tablename. But its not working.
Anybody having any idea; would be of great help.
Thanks,
Salman Shehbaz.
View 3 Replies
View Related
Nov 24, 2007
In my SSIS Package, I have one Execute SQL Task containing a few SQL Statements of the format:
"DELETE FROM <Table_Name>", followed by one SQL statement for executing a stored procedure with an output parameter of the format: "EXEC <StoredProcedure_Name> ? OUTPUT". The output of the stored procedure has been mapped to a global package variable (data type: nvarchar).
If I remove the SQL Statements of the format: "DELETE FROM <Table_Name>" from within the Execute SQL Task, the stored procedure returns the desired output. However, If I introduce these SQL statements in the Task just prior to the "EXEC <StoredProcedure_Name> ? OUTPUT" SQL Statement, the output returned to me always contains a part of the first set of SQL Statements.
Here is a sample output that I get:
"The data corresponding to the ECO: 35053776 has not yet arrived.The data corresponding to the ECO: 35054112 has not yet arrived.
em]
WHERE LEN([ID]) = 12 AND
[ID] LIKE N'100%' AND
[ID] LIKE N'%0';
DELETE
FROM [dbo].[TempECOItem]
WHERE LEN([ID]) = 9 AND
[ID] LIKE N'71%';
EXEC dbo.LoadData ? OUTPUT
"
If you notice, the output that I receive from the stored procedure contains a part of the SQL statements within the Execute SQL Task.
The Execute SQL Task has an OLE DB connection type. I use a "Direct Input" SQL Source Type and my database is a SQL Server 2005 Database. It seems as though the output variable is automatically being set to the SQL Statements in the Execute SQL Task. I even debugged this Package and have found that only at the end of the Execute SQL Task, the variable receives the above value. Prior to this, the variable is empty.
Does anyone know what is going on or, does anyone know of a workaround? Any help would be appreciated.
View 6 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
Mar 3, 2007
hi
I would like to create a SSIS package that is going to be called by store procedures.
What i have done so far.
1) I created a Execute SQL task that come with this statement e.g. Seleect * from tblA where BD >= ? and BD =< ?
2) I save this package as a DTSX file and will called it from a proc.
My intention is to pass 2 values when i call the proc. What should do next? any guided tutorial or steps i would be happy. thanks
View 1 Replies
View Related
Mar 22, 2006
Hi,
I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.
It eventually resolves after a while. What could it be?
Thanks
Philippe
TITLE: Microsoft Visual Studio
------------------------------
Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))
------------------------------
BUTTONS:
OK
------------------------------
View 7 Replies
View Related
Mar 26, 2008
I have a command to decrypt a file that I can run from the command line and it works beautifully. However, when I stuff it into an execute process task, it errors out every time or does nothing.
Here is the command I can run from the command line:
gpg -d --passphrase-fd 0 < c:Dip_Fif.WUZ -o c:Someoutputfile.in1 -r "KeyName" c:Someinputfile.in1.pgp
I've pointed the execute process task object to the gpg.exe executable on my system and am stuffing the remainder in the arguments line. I have also tried changing around all the timeout settings and sucess values. I have found I can change the success value to 2 and it will show up as being green when complete, but the file doesn't decrypt. It just in turn will throw an error on the next piece because the required file is not there.
I will probably end up writing a script to get this to work and use a script task but I really want to know why this will not work.
--Thanks--
View 12 Replies
View Related
Jun 18, 2007
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
View 11 Replies
View Related
