SSIS Foreach Loop Stress Testing Problem.
Mar 2, 2006
I am currently working on a project which needs to load over a 1000 xml files. The files are stored across 10 subfolders. I am using a foreach loop with a file enumerator, which is configured at the top of the folder structure and traverses the subfolders. This loops through the files, load the data and then moves the file to another folder. The package executes fine for a few 100 files but then hangs; this happens after a different number of processed files each time the package is run. While trying to resolve the problem we ran performance counters and noticed that the number open handles increased significantly just about the time Dtexec looked like it had hanged and DTexec also then started taking a lot of the cpu processing time. Has one else come across similar situations?
View 9 Replies
ADVERTISEMENT
Nov 15, 2006
I have a SSIS package this set to run at a specific time each day. If there are no files for the ForEach tool to work upon...while it doesn't 'fail'...I would like to test for the condition that the enumerator was empty...so that I could send an email message reminding someone to followup and investigate.
What would be the best way to test for that condition?
View 5 Replies
View Related
May 1, 2001
Hi,
Is there anyway to test the loadtesting/Stress testing on SQLSERVER. I wanted to executes a Store procedure with concurrent users.
Thanks
JK
View 1 Replies
View Related
Dec 24, 2002
Anyone have a tool or script to run to test a SQL server under heavy stress?
View 1 Replies
View Related
Jan 28, 2005
What do you recommend for stress-testing the performance of key stored procedures (they have been identified) for our application? The parameters can be programatically selected, for example:
Select 'exec my_proc @id = ' + Cast(id As varchar)
From myTable
Where foo = 'bar'
I have the Support Tools Available For Stress Testing & Performance Analysis (http://www.microsoft.com/downloads/details.aspx?FamilyId=5691AB53-893A-4AAF-B4A6-9A8BB9669A8B&displaylang=en) from Microsoft's site and they are pretty good.
Recommendations appreciated, and thanks in advance!
View 2 Replies
View Related
Mar 8, 2002
I am testing different raid setups in a Datawarehousing environment.
E.G
3 X Raid 5 (with four filegroups)
3 X Raid 10 (with four filegroups)
At the moment I have chance to trial different hardware configurations.
I want to measure what are the performance differences
I need to stress test these configs. Is there any tools I can use to do this.
Any loads I can use. What should I measure.
Are there any aricles for the environment
Any help would be great
Pete
View 2 Replies
View Related
May 24, 2006
Could someone send me any links or information on how to loop through an ADO.NET dataset in SSIS? I need step by step information please.
Thank you,
Shiva
View 32 Replies
View Related
Feb 20, 2008
Is there a way to register a new ForEach Enumerator within SSIS, for example ForEach Email in Exchange Inbox?
Or is the solution to create an SSIS variable and use the ForEach From Variable Enumerator? I take it the variable has to implement IEnumerable, or IEnumerable<T>.
My preference out of the two would be to register a new foreach enumerator which would take some implementation away from the developers and reduce time spent on the tasks at hand.
thanks for your help
Pete
View 5 Replies
View Related
Sep 14, 2006
I am having some problem in running SSIS scheduled job.
The job is processing (updating and inserting) batches of data using Execute SQL Task inside Foreach loop container. But to make sure the batch complete successfully I put the "Begin Tran" Execute SQL Task and "Commit Tran" Execute SQL Task before and after the foreach loop
My workflow is like the following....
- Execute SQL Task "Begin Tran"
- ForEach Loop Container for a batch of records.
- Insert the records into the database
- End ForEach Loop
-Execute SQL Task "Commit Tran" if the above ForEach Loop complete successfully
-Execute SQL Task "Rollback Tran" if the ForEach Loop failed
Normally the insert records are around 10~200 and the job is running very fine...
But if the records are more than 1000s then sometime the job hung (I would say hung because the DTEXEC.exe can be seen inside the windows task manager.) There was no indication what so ever whether the job finished or the job failed or the job else....
Can anybody help to find the cause.....
Rgds,
KyawAM
View 5 Replies
View Related
Mar 24, 2014
why when I make a change to a foreach loop container in a SSIS package it does not save?
I am trying to change the base file name and if I change it through either the edit or properties windows, the changes does not save. Fore example i change the Files: or File Spec: from oldfile*.txt to newfilename*.txt and when I save and og bak into the edit area to confirm the change, the Files: section shows as "oldfile*.txt.
View 4 Replies
View Related
Jan 14, 2006
I am new to SSIS world, so my question is very basic.
Setup:
In a company I work for we have 12 SQL servers each running between 1 and 3 databases with anywhere between 10 to 20 tables. I need to query some of these tables and merge results to the destination database.
The list of all these tables is stored in the separate table <SOURCES> of the following format [ServerName,DatabaseName,TableName]. Tables of my interest have identical structure (same columns) accross servers and databases.
Question:
How can I loop over servers and databases specified in <SOURCES> to run otherwise identical query against these tables?
I can easily retrieve [ServerName,DatabaseName,TableName] from <SOURCES> as string variables using FOREACH loop. The problem is now - how do I use string variables to set up Server, Database and Table name at run-time?
Thank you
View 4 Replies
View Related
Apr 4, 2007
How do you sort files from the Foreach loop container?
I love this component, except I can't get it to sort by filename.
Nice to know how to sort by timestamps also.
Dave
View 27 Replies
View Related
Apr 22, 2008
Hello
I have a question
How is foreach loop container - foreach ADO enumerator performace in SSIS package compares to use of cursors in stored procedures
Is there any articles comparing them
I understand a lot of factors can affect the performance, however what is expected performance for the foreach ADO enumerator loop for large dataset. What is Microsoft recommendation for that - recommended - not recommended (using large datasets - over million records)
Thank you
Arminr Bell
View 4 Replies
View Related
Apr 11, 2007
Hi,
I have no "Foreach File Enumerator" oprtion in the Enumerator Property of the Foreach Loop Component.
I have this enumerator in the c:Program FilesMicrosoft SQL Server90DTSForEachEnumerators folder.
Also I check it in the GAC - it does not here. I try to execute gacutil.exe -iF ForEachFileEnumerator.dll, but it is failed with "Failure adding assembly to the cache: The module was expected to contain an assembly manifest." Seems it is not managed enumerator.
Please help me.
Also information on how to regeister unmanaged enumerators are welcome!
View 3 Replies
View Related
Sep 8, 2015
I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure. I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container. The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure ?" within the "Execute SQL Task". The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one. I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task". How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?
View 4 Replies
View Related
May 6, 2015
In order to update an Oracle table target from a SQL Server table source I need to use a Foreach Loop Container, so I can loop on the rows of the SQL Server table source. This source table has two columns: the old identifier to update and the new identifier to apply. I must use the value of the old identifier to filter the Oracle rows to update, while the new identifier is the new value to assign to the filtered old identifier.
I already know how to use the Foreach Loop Container when it is necessary to loop on an unique column of a table/view (using an object variable, using a Foreach ADO enumerator, etc.), but I need to loop on two columns.
View 8 Replies
View Related
May 28, 2010
difference between FOR LOOP and FOREACH LOOP with example(if possible) in SSIS.
View 4 Replies
View Related
May 2, 2007
I want to enumerate all *.xls and *.csv file. How to fill the Files box? I tried
*.xls, *.csv
*.xls *.csv
*.(xls|cvs)
all doesn't work
View 4 Replies
View Related
Apr 21, 2008
Hello
I am trying to use Foreach loop container - Foreach File Enumerator
Is there easy way to retrieve enumerator configuration folder from variable - so I can easily move package from server to server?
I would like to have name of the folder we getting files from retrieved from variable by using this control
Thank you in advance
Armine Bell
View 3 Replies
View Related
Mar 3, 2006
I have a foreach loop that is supposed to loop through a recordset, however it doesn't loop. It just repeats the same row, row after row.
I would like to look into the recordset variable but I can't because it is a COM object and the ADODB namespace is not available in the script task.
Any solution to this? anyone experienced anything similar
View 1 Replies
View Related
Jul 10, 2006
I need to execute about dozen packages from another package... how do I dynamically pass the dozen package names to the package and execute using foreach loop...?
idea is to store the names of packages in a text file and set the file connection property reading each package names from the text file... in this way I can just configure/edit the text file from time to time, the packages and the units that I want to execute...
Someone please provide me steps to make it work.
Thanks in adv.
View 4 Replies
View Related
Jun 10, 2007
Hi,
I'm looping through some query data and doing a Script Task check inside the loop on a datetime field.
If the datetime happens before 10 o'clock:
- Store the data row in Table1
If the datetime happens after 10 o'clock:
- Store the data row in Table2
How can I store the datarow inside the loop without inserting it into a database table?
I need to access the data in the next step after the loop. How can I do this?
Thank you very much!
View 4 Replies
View Related
Feb 28, 2008
The foreach loop below runs fine and it sends emails as expected but the SP does not update the Companies table. Any thoughts? How do I cause the SP to execute?
PROCEDURE newdawn.EmailSentDate @CID intAS UPDATE Companies SET Companies.LastEmailDate = (GetDate()) WHERE tblCompanies.C_ID = @CID RETURN
foreach (GridViewRow row in GridView3.Rows) { pstrTo = row.Cells[2].Text; CEmail = row.Cells[2].Text; CName = row.Cells[3].Text; CID = row.Cells[1].Text; CState = TextBox1.Text; CCity = row.Cells[5].Text; CCat = row.Cells[4].Text; CCID = row.Cells[0].Text;
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString); SqlCommand cmd = new SqlCommand("EmailSentDate", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@CID", CCID); try { System.String mailServerName = "mail.domain.com";
REST of code sends email to email address found in each row ....it all works find but SP above does not fire.
View 12 Replies
View Related
Jan 22, 2008
Hello Experts,
Sorry that I open a new thread again but I didn€™t found any good tutorials about foreach loop container. I would like to read every row from one table and do something.
I red something about sql task€¦ Can someone give a little instruction, please?
Kind regards,
Alex
View 3 Replies
View Related
Feb 15, 2007
Hi
I using data flow task to import from flat file to database but i need to use Foreach Loop Container to import multiple files in specific folder and all will be insert in the same table
tahnks & Regards
View 1 Replies
View Related
Feb 27, 2008
Help with Looping in a SSIS Package
Scenario:
We have a web app that lets our existing clients insert new locations into a table (Clients) in a SQL Server DB. This table has an Identity column as the PK. This table also has another ID field HBID that is the PK for another table (HLocation) in another Database system (Sybase). The HBID field is given a Default value of €˜1€™ during an insert operation in our (SQL Server) table, Clients. The Sybase database uses a Sequence table for inserting a PK into the table. Whenever our clients insert a new record in Clients (SQL Server), I need to generate a new HBID from the Sequence table in (Sybase), update the HBID in the Clients table (SQL Server) and then finally insert the record with the new HBID into table HLocation (Sybase).
I have devised a SSIS package for this as following: Note all variables are scoped at the Package Level.
Execute SQL Task #1 that drives a For Each Loop with the following properties:
General:
Connection Type: OLE DB
Connection: SQL Server DB
SQL SourceType: Direct Input
SQLStatement:
SELECT COID, HBID, Name, DateCreated
FROM Client
WHERE HBID = '1'
ResultSet: = Full Resultset
Result Set:
Result Name = 0
VariableName = USER::rsClient Variable Type = Object
ForEachLoop with the follwing properties:
Collection:
Foreach ADO Enumerator
ADO Object Source Variable = USER::rsClient
Enumeration Mode = Rows in first table
Variable Mappings:
Variable: Index:
COID 0
HBID 1
Name 2
DateCreated 3
Inside of the ForEachLoop I have another Execute SQL Task to generate a new HBID from Sybase set up as following.
Execute SQL Task #2
Connection Type: OLE DB
Connection: Sybase
SQL SourceType: Direct Input
SQLStatement:
UPDATE Autoinc SET INC_LAST = (INC_LAST+1) WHERE INC_KEY ='HBID';
SELECT INC_LAST AS NewHBID FROM Autoinc WHERE INC_KEY ='HBID'
ResultSet = SingleRow
Result Set:
Result Name = NewHBID
VariableName = USER::NewHBID, VariableType = Int32
Also Inside the ForEachLoop is a Script Task that has all of my variables as ReadWrite = COID, HBID, Name, DateCreated and NewHBID. I concatenate the values in a string a pass the string into a Message Box to make sure they are looping correctly and they are.For example the results might look like the following:
12698, 1, John Doe Trucking, 10/1/2007, 14550
13974, 1, Joe Smith Trucking, 10/1/2007, 14551
10542, 1, Dave Jones Trucking, 10/1/2007, 14552
Etc.
The values 14550 -14552 are the new HBID being generated in the loop.
The problem is that when I try to Update the HBID in the Client table (SQL Server) with another Execute SQL Task I keep getting the same NewHBID number.
In this case 14550 would be updated for every record instead of the next number in the loop.
I have set up Execute SQL Task #3 as follows:
General:
Connection Type: OLE DB
Connection: SQL Server DB
SQL SourceType: Direct Input
SQLStatement:
UPDATE Client
SET HBID = ?
WHERE HBID = '1'(SELECT COID, HBID, Name, DateCreated FROM Client)
ResultSet: = Full ResultSet
Result Set:
Result Name = 0
VariableName = USER::rsNewClient, VariableType = Object
Parameter Mapping:
VariableName USER::NewHBID, Direction = INPUT, DataType = Long
ParameterName = 0
I€™ve tried putting Execute SQL Task #3 inside of the ForEachLoop, connecting it to the output of the ForEachLoop. I€™ve tried setting up a dataflow with a Derived Column using the USER::NewHBID as the Expression.
I still get the same results, 14550 added to every row.
Can any one help or shed some light?
Any and all suggestion will be deeply appreciated!
Thanks !!!
View 1 Replies
View Related
Jun 14, 2007
Hi,
Let's say you have a Data Flow Task that connects to a Foreach Loop, looping through the data.
Somewhere inside the Foreach Loop, you set an int variable MyInt to a value.
My question:
Is it possable when each iteration begins to set MyInt to 0?
Thanks in advance.
View 4 Replies
View Related
Feb 28, 2007
I'm having a problem where I'm using a Execute SQL Task to retrieve a dataset and storing that in an object variable. Then on success of that execute sql task I use a foreach loop task to go through the dataset and do 2 tasks inside the foreach loop. When I execute this package I have ~12 records in the dataset however when I get to the foreach loop in the 2nd iteration it keeps repeating it. It acts like it is stuck on the second record (tuple) and never goes on. I'm using an ForEach ADO Enumerator in the foreach. I've even set a breakpoint on each iteration and no task fails in side the foreach loop. I'm completely perplexed why it will iterate to the 2nd record but get stuck there in an endless loop. I've tried this on 2 different computers (with different data values) and the same thing happens. Does anyone have any suggestions?
View 40 Replies
View Related
Oct 10, 2006
I defined Foreach File Enumerator,there are more than 2 files needed to deal with,it donesn't work if i don't specify filename in flat file connection manager editor,however if i specify filename then doesn't foreach files
what should i do? thanks
View 4 Replies
View Related
Oct 9, 2006
Help,
Trying to through a process together and using the "ForEach Loop" task. When configuring the task and using the ForEach Loop Editor I do not have the "ForEach File Enumerator" in the drop down. Anyone know whats going on or what I need to do to make this appear. I only see 5 selections: ADO, ADO.Net Schema Rowset, Variable, NodeList, and SMO Enumerators. I am also using the SQL 2005 eval with SP1.
Thanks,
John
View 2 Replies
View Related
Jan 3, 2007
Here is what I am attempting to get accomplished. I have an SSIS package that contains a Foreach loop container. This container executes a number of SQL tasks in order: SQL Task 1, SQL Task 2, SQL Task 3.
if the SQL task 1 succeeds it should flow on to SQL Task 2 and 3. This works fine when the SQL tasks do not fail...
In the event of any SQL Task failing control should flow to a send mail task to alert about the failure. Next the Foreach loop container should go to the next enumeration in the Foreach loop container and start the next new SQL task 1. So far I have been able to get the control to flow to the send mail task when a SQL Task fails. What does not work is when one SQL Task fails the entire Foreach loop fails and does not move to the next enumeration. It should only fail the package and move on.
Any help would be appreciated....
View 5 Replies
View Related
Feb 6, 2008
if there are no files in the directory i'm searching? Or if not fail, give me something so that I know & can raise a flag as needed?
thanks
View 1 Replies
View Related
May 9, 2006
I need to put a FTP task inside a Foreach Loop Container to upload data files to many different FTP servers. The container holds a variable with object data type that includes necessory FTP info (FTP server address, login, password and remote path). How do I configure FTP task so that I can pass the variables to it?
Thanks,
Jia
View 1 Replies
View Related
