I am getting this error when connecting to Oracle db. I tried using Microsoft OLEDB provider for Oracle it give me error and tells me the error could not be retrieved from Oracle. When I try the Native OLDDB provider for Oracle I get
Warning at {0F67F2FA-E3F8-4F44-93EC-47D513A34FD4} [Orcale Database WPHP2 [1]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Error at Copy DSS_SJV_Volume_History [DTS.Pipeline]: The "output column "COMP_UNIQUE_ID" (2007)" has a precision that is not valid. The precision must be between 1 and 38.
Im getting the following error when I try to export from Oracle 9i and import into SQL Server 2005 using Oracle and SQL OLE DB Provider's respectively.
Cannot retrieve the column code page infor from the OLE DB Provider. If the component supports the "DefaultCodePage" property, the code page from that property value will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
I know there is a way to change the property settings for the OLE DB Provider in the Data flow section of the development studio BUT ...
1) Is there a way to change this outside of the development studio?
2) I can't create the package to setup in the studio because even when I uncheck execute immediately and check save package, it still fails and never creates anything.
Does anyone know how to import data from an Oracle view (on Unix machine) to the tables in NT/SQL server 7.0? At least point me to the right docoment resource, if available. Thanks a lot.
I am running SQL Server 2005 and have built a simple SSIS package to import data from an oracle database to my SQL Server 2005 database. When I run it in SSIS, it works and it imports just fine. When I schedule it, it gives me problems. Help!
It might be a problem with Oracle Provider client I installed. Is there a client version I can download and install? the one I downloaded from oracle doesn't work. I bet i did something wrong though.
Here is my version:
Microsoft SQL Server Management Studio 9.00.2047.00 Microsoft Analysis Services Client Tools 2005.090.2047.00 Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447) Microsoft MSXML 2.6 3.0 4.0 6.0 Microsoft Internet Explorer 6.0.3790.1830 Microsoft .NET Framework 2.0.50727.42 Operating System 5.2.3790
Microsoft Visual Studio 2005 Version 8.0.50727.42 (RTM.050727-4200) Microsoft .NET Framework Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services Microsoft SQL Server Analysis Services Designer Version 9.00.2047.00
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 9.00.2047.00
SQL Server Reporting Services Microsoft SQL Server Reporting Services Designers Version 9.00.2047.00
Ok, we have built a data mart using SSIS etc...for transformations and loading.
Our biggest single problem we have currently is loading data from an Oracle server to our SQL server. Some tables from oracle run fine when retrieving the data but there is one particular table that just doesn't load fast enough (9 million records take over 12 hours). It seems that we are idling alot and its not always running.
I have SSIS package which is created to pull data from oracle server. The package is running fine when executing from BI studio. But failing when i execute as a job. I am getting teh below error message.
Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-15 16:04:15.60 Code: 0xC020801C Source: Data Flow Task O... The package execution fa... The step failed.
Appreciate if somebody can provide some inputs on this .
I have become frustrated and I am not finding the answers I expect.
Here's the gist, we support both Oracle and SQL for our product and we would like to migrate our Clients who are willing/requesting to go from Oracle to SQL. Seems easy enough.
So, I create a Database in SQL 2005, right click and select "Import Data", Source is Microsoft OLE DB Provider for Oracle and I setup my connection. so far so good.
I create my Destination for SQL Native Client to the Database that I plan on importing into. Still good
Next, I select "Copy data from one or more tables or views". I move on to the next screen and select all of the Objects from a Schema. These are Tables that only relate to our application or in other words, nothing Oracle System wise.
When I get to the end it progresses to about 20% and then throws this error about 300 or so times:
Could not connect source component. Warning 0x80202066: Source - AM_ALERTS [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
So, I'm thinking "Alright, we can search on this error and I'm sure there's an easy fix." I do some checking and indeed find out that there is a property setting called "AlwaysUseDefaultCodePage" in the OLEDB Data Source Properties. Great! I go back and look at the connection in the Import and .... there's nothing with that property!
Back to the drawing board. I Create a new SSIS package and figure out quickly that the AlwaysUseDefaultCodePage is in there. I can transfter information from the Oracle Source Table to the SQL Server 2005 Destination Table, but it appears to be a one to one thing. Programming this, if I get it to work at all, will take me about 150 hours or so.
This make perfect sense if all you are doing is copying a few columns or maybe one or two objects, but I am talking about 600 + objects with upwards of 2 million rows of data in each!!
This generates 2 questions: 1. If the Import Data Wizard cannot handle this operation on the fly, then why can't the AlwaysUseDefaultCodePage property be shown as part of the connection 2. How do I create and SSIS Package that will copy all of the data from Oracle to SQL Server? The source tables have been created and have the same Schema and Object Names as the Source. I don't want to create a Data Flow Task 600 times.
We have a custom web C#/SQL2K8R2 workflow application that I need to pull Oracle data into a varchar(max) field as an XML DOM document. I have no problem pulling the Oracle data using OLEDB, but I'm not sure how to create the XML DOM doc. Once I get it into the DOM doc, I then need to assign metadata about the XML DOM doc and insert it all into a staging table:
CREATE TABLE [stg].[EtlImports]( [EtlImportId] [int] IDENTITY(1,1) NOT NULL, [EtlSource] [varchar](50) NOT NULL, [EtlType] [varchar](50) NULL, [EtlDefn] [varchar](max) NULL, --Either a SQL statement or path to file on disk [EtlData] [varchar](max) NULL, --BLOB field to hold the XML data or FILESTREAM path to file on disk [EtlDateLanded] [datetime] NOT NULL, [EtlDateProcessed] [datetime] NULL, [EtlStatus] [varchar](50) NULL, [Comments] [varchar](4000) NULL ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
I will have a separate SSIS package to pull the [XML/File] field and process the data into the workflow tables. Is there a wasy I can use the ADO Record-set Destination task to accomplish this, or do I have to create a custom C# script to create the XML DOM Doc?
I am using Import and Export wizard and seeing a very weird behaviour.
I am able to choose 'Microsoft OLE DB Provider for Oralce' and provide server name, username/ password. The test connection results in a success. However when I try to move to next window/page by clicking next I get invalid oracle error ora-01017 - invalid username/ password.
I have a column in an Oracle source system with data type NUMBER(38,2). The value "-0.01" is causing problems when trying to import into a SSIS data-flow.
The only way I can import this into my data-flow is by using a Datareader connection manager using the ODBC Data Provider. My DSN is using the Oracle ODBC driver.
If I try and use the "Native OLE DBMicrosoft OLE DB Provider for Oracle" I get an error: "The data value cannot be converted for reasons other than sign mismatch or data overflow"
Judging by this post: http://microsoftdw.blogspot.com/2005/11/final-storyhow-to-get-data-out-of.html there aren't really any other combinations to try that will bring my data in as I want it.
I don't want to use ODBC though as:
Its an old technology Its slow I have to deploy an additional DSN.
Can anyone tell me why the other options don't work? Why does Microsoft OLE DB Provider for Oracle have a problem with "-0.01"?
Hi, I have a table in SQL Server 2005 which has [Id] and [Name] as its columns. I also have a Oracle database which has a similar table.
What I want to do is as follows: In a SSIS package, I want to pick up details from SQL Server and update the Oracle table. And then should be done without using a linked server connection.
Can someone guide me as to how I can specify a update statement in the destination dataflow.
I am working on a project to write SSIS packages to update a SQL Server 2005 database with data from an Oracle 10g database. Unfortunately, our development ETL box is running 32 bit Windows Server 2003 while the production ETL box is running 64 bit Itanium Windows Server 2003. We have created SQL Server Agent jobs to execute all of our packages. All of our jobs run without error on the 32 bit development box, but in our preproduction tests they are failing in the 64 bit box.
In my testing, I've found that I can successfully pull character data from Oracle. For example, I can write a package that retrieves the data for the following query:
SELECT 'test' FROM dual
However, the following fails:
SELECT 1 FROM dual
I have logging turned on in my package. When the package fails, I typically see informational messages in the log up to the point of failure, but no actual error event logs are generated. The only error information I have is in the SQL Server Agent job history log, which contains the following:
Executed as user: SERVERNAMESYSTEM. The return value was unknown. The process exit code was -2147483646. The step failed.
I have also tried using the 64 bit version of the DTS Wizard to create a sample package, and observe the same behavior. When I run the DTS Wizard, queries that return numeric data cause DTSWizard.exe to exit and produce the following message in the application event log:
Event Type: Error Event Source: .NET Runtime 2.0 Error Reporting Event Category: None Event ID: 1000 Date: 2/1/2007 Time: 12:36:13 PM User: N/A Computer: SERVERNAME Description: Faulting application dtswizard.exe, version 9.0.2047.0, stamp 443f5e50, faulting module oracore10.dll, version 10.2.0.1, stamp 435841b0, debug? 0, fault address 0x00000000001e4910.Has anyone else experienced similar behavior, and know of a solution aside of wrapping all retrieval of numeric data in to_chars in our Oracle queries?
We will need to routinely import only changed data from an Oracle data base into a SQL database. So we need an agent that will 1) Compare data in both databases (From disparate tables) 2) Import only that which is changes or new.
I am new to SQL server administration and am looking for a best practice method that we can be run on a weekly basis. I am open to using third party software solutions, but would prefer a native MS SQL 2000 solution. Can someone point me in the right direction? Thanks.
I'm using - Destination - Oracle driver - oraOLEDB.Oracle.1 (native ole dboracle provider for ole db)
Source - SQL driver - microsoft ole db prover for sql server. I want to import data from sql server to oracle. Challenge is, I have 1 million records on oracle. I have 100 records on sql server (these 100 records count will change daily). So, I thought of using 'lookup' task looking taking record from ms sql and fetch corresponding record from oracle. But when I use lookup, all records from oracle are loading into cache, which is taking approx 3 hrs.
I'm trying to create an import package using BIDS. I'm using SQL Server 2008. The data is saved as a .csv file so that I can use the flat file option for data source. The issue I am having is that when I preview the flat file after selecting it as the datasource, some of the data that have the numeric file format are showing up as non numeric, for instance the value -1,809,575,682,700 is being viewed as ""1 and the package is giving a conversion error.
Hi, I've a question about importing Oracle data and some fields are null. I get an error 'Conversion failed because the data value overflowed the specified type'. When i look in preview query result, via OLE db Source editor > Preview, this field contains '<value too big to display>'.
I am working on SSIS wehre I need to work on a flat file as a source and needed to import it to database. If the destination table have the record already, I need to update it and if not exist, I just need to import the whole data.
Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?
When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"
We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.
We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.
How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?
This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
I want to use "Oracle Data Provider for .Net" driver to get Oracle 10g data in SQL Server 2005 environment. I am getting this error message when try to import oracle tables in sql server.
"Operation could not be completed. The server name is not specified (DTS wizard)."
Any help will be very highly appreciated.
Also I want recomemndation on which driver should I use for getting huge Oracle data into SQL server environment?
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server. I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard. However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success) - Setting Source Connection (Error) Messages Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed. (SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1. Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification.
Could you please look into this and guide me Thanks in advance venkatesh imtesh@gmail.com
I have a package that inserts data from a sql server table to an oracle table. I use a dataflow task to do the loading.
The weird thing is, if the package fails during execution, the transaction does not perform a rollback and the inserted data is committed.
The dataflow component has its TransactionOption set to Supported (this has always been the case for our sql to sql packages). However, now that I have a sql to oracle package, it won't work anymore.. also, setting the TransactionOption of the dataflow component to Required causes the whole package to fail.
I am trying to pull data from an Oracle Db using SSIS. If I use the Table/View option in the Access Mode option on the OLE DB Source component, it works fine. But when I use the SQL Command option, the processing get stuck at Pre-Execution stage.... (for days).
OK I migrated a DTS package from MS SQL 2000 to MS SQL 2005 64-bit SSIS. OK so I fixed a problem with a Double Global Variable... Now I am stuck at a connection to Oracle and it returning data... Here is the error message:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "Remedy_Count": "Unsupported data type on result set binding 0.".
My SQL Statement is this:
SELECT COUNT(*) AS Expr1 FROM DB.MYTABLE
When I run it from the Query Builder it returned this:
EXPR1 = 2983
Here are some details from the General Page on the Execute SQL Task
ResultSet - Single row ConnectionType - OLE DB Connection - Oracle Provider for OLE DB SQLSourceType - Direct input BypassPrepare - True
In the Result Set I have The following:
Result Name - Variable Name 0 - Remedy_Count
So... what can I do to fix this. I have the Remedy_Count set as a:
EvaluateAsExpression - False Value - 2414 ValueType - Double
I have tried setting the ValueType to Object and other things... Same error... I read some where about how SSIS has issues when Oracle returns a Numeric type data. Can someone help me with this? Anything you all can tell me would be great.
have tried to import data from a big (257Mb, I has about 1.000.000) flat file into a table, inside SSIS. The process doesn’t work correctly. It stops in the same register (about 179.000). I have reviewed the process and have opened the file making it shorter (about 150.000 lines, including the line that before seems to break the process), and it works. Making the file longer it breaks the process again.
The error showed by the program:
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2820]: Data conversion failed. The data conversion for column "debe" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Flat File Source [2820]: The "output column "debe" (4066)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "debe" (4066)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2820]: An error occurred while processing file "Z:PROYECTOS ITSoluciones de negocioProyectosSANDOProyecto 5. CodificaciónETLcapun00108.unl" on data row 36804.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2820) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Anybody knows what could be happening?
Any help would be very appreciated
Thanks
PD: I mean that it´s not a date format problem (I have reviewed some post talking about it)
