SSIS Job Fails
Jun 11, 2007
I am trying to run a SSIS package from a job. But the job fails. The Package extracts data from an MS Access database, and pumps into the SQL Server 2005. And the Access mdf file is located in a network shared location. While developing, I mapped the network share location to a local drive letter, and finished th dev work, and added a XML config file to point to the shared location. But when I tried to run the same package from a job, it fails with an error, unable to access the Q: drive. I even tried creating the same network drive on server, and it still fails with the same error.
I have tried to read the properties using the script from the below location, and package loads the configs from XML perfectly. http://blogs.conchango.com/jamiethomson/archive/2005/10/10/2253.aspx
The same package runs perfect, when I run from VS on server, or directly from Management Studio on server. But, only the job fails.
[The Access mdf contains linked xl files mapped to Q drive, but I am not using any of those linked files. Does the package validate the whole access mdf file before if establishes a connection? Even though, I have created a Q: drive on the server too, it fails]
I am unable to figure out the problem. Anybody had the same problem?
Thanks,
Srikanth
View 3 Replies
ADVERTISEMENT
May 13, 2008
Hi all.,
I am trying to schedule a SSIS package into SQL Job., for that I created a account with sysadmin role which named karthikm.,
I create a new proxy settings.,
with all the permissions.,
But still the Job fails.,
Error message: The job failed. The Job was invoked byUserkarthikm. The last step to run was step1(Step1).,
any idea to solve this problem.,
View 20 Replies
View Related
Jun 12, 2007
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date6/12/2007 4:19:15 PM
LogJob History (VistaODSFeed)
Step ID0
Server006-DEVSQL2005
Job NameVistaODSFeed
Step Name(Job outcome)
Duration00:00:00
Sql Severity0
Sql Message ID0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted0
Message
The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
ideas?
View 1 Replies
View Related
Aug 21, 2007
Hi,
I have hourly job running which I inherited from developers. I get this errors in the job. I can't figure out what's wrong and why it's failing.
I can't troubleshoot it either because I do not have exact dev enviornment to reproduce the problem. error is attached.
Please advise
=================
Executed as user: USsqldbagent. ...Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:06:02 AM Error: 2007-08-21 10:06:03.30 Code: 0xC020837F Source: Fill Update Table with new data DataReader Source [1] Description: The data type of "output column "AvailabilityBy" (1885)" does not match the data type "System.String" of the source column "AvailabilityBy". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004706B Source: Fill Update Table with new data DTS.Pipeline Description: "component "DataReader Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004700C Source: Fill Update Table with new data DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-08-21 10:06:03.30 Code: 0xC0024107 Source: Fill Update Table with new data Description:. The step failed.
===========
I can run the job for testing. I can't really change anything on server to test this other than database.
Thanks a lot in advance
View 5 Replies
View Related
Jan 25, 2008
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
View 9 Replies
View Related
Jul 6, 2006
When I use the OLB data source (SQL SERVER 2005), select * from tableA, then
use several steps and then Union ALL and Fuzzy Match, the process works
fine. When I change the data source SQL to include two tables with a cross
join, the new fields in Table B do not appear in the Union ALL or Fuzzy
Match steps but do appear in all steps prior. The advanced editor refresh
does not fix the problem. Deleting and recreating the Union ALL shows the
Table A and Table B fields. Fuzzy Match is still incorrect. Deleting and
recreating Fuzzy Match fixes it.
View 5 Replies
View Related
Mar 12, 2008
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
View 13 Replies
View Related
Mar 17, 2008
Folks:
When I run this from Windows Command Prompt (DOS) it runs successfully but when run from SQL Management Studio (Query nalyser) using xp_cmdshell it fails. Any help is appreciated.
This runs with SUCCESS.
-------------------------
Dtexec /F "E:PackSSIS_Total1.dtsx" /SET package.variables[User::strStatusEmailTo].Value;"xyz@abc.com" /SET package.variables[User::strFileSystemRoot].Value;"Z:" /SET package.variables[User::strServerName_Admin].Value;"pacers"
This FAILS.
------------
exec master..xp_cmdshell 'Dtexec /F "E:PackSSIS_Total1.dtsx" /SET package.variables[User::strStatusEmailTo].Value;"xyz@abc.com" /SET package.variables[User::strFileSystemRoot].Value;"Z:" /SET package.variables[User::strServerName_Admin].Value;"pacers"'
ERROR:
------
End Progress
Progress: 2008-03-17 12:28:53.13
Source: DFT Format Log Info
Validating: 100% complete
End Progress
Progress: 2008-03-17 12:28:53.15
Source: DFT Table Extract to File
Validating: 0% complete
End Progress
Error: 2008-03-17 12:28:53.15
Code: 0xC0202009
Source: MyPackage Connection manager "encore_cm"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.".
End Error
Error: 2008-03-17 12:28:53.18
Code: 0xC020801C
Source: DFT Table Extract to File OLE_SRC tblFileConfigMaster [1]
Description: The AcquireConnection method call to the connection manager "encore_cm" failed with error code 0xC0202009.
End Error
Error: 2008-03-17 12:28:53.20
Code: 0xC0047017
Source: DFT Table Extract to File DTS.Pipeline
Description: component "OLE_SRC tblFileConfigMaster" (1) failed validation and returned error code 0xC020801C.
End Error
View 4 Replies
View Related
Sep 27, 2006
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.
View 5 Replies
View Related
Apr 17, 2007
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
What am I missing??
Thanks
Mike Allen
View 7 Replies
View Related
Jun 20, 2006
Hey Folks,
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
Thanks and greez
Karsten
View 1 Replies
View Related
May 20, 2008
I am trying to generate Excel documents from SQL DB 2005 using SSIS packages. I created a schedule, which works fine when it runs every 5 minutes etc, but it stops when I change back frequency to once a day. Schedule works only once, and second day not with following error code:
Code: 0xC0202009 Source: Data Flow Task Destination - Query [22] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2008-05-20 10:43:01.46 Code: 0xC02020E8 Source: Data Flow Task Destination - Query [22] Description: Opening a rowset for "Query" failed. Check that the object exists in the database. End Error Error: 2008-05-20 10:43:01.46 Code: 0xC004701A Source: Data Flow Task DTS.Pipeline Description: component "Destination - Query" (22) failed the pre-execute phase and returned error code 0xC02020E8. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:43:00 AM Finished: 10:43:01 AM Elapsed: 0.609 seconds. The package execution failed. The step failed.
I will appreciate any idea and help.
View 1 Replies
View Related
Mar 7, 2008
Hi,
We use SSIS to download data from a DB2 database using DB2 Connect and MS OLE DB as source and target drivers. It runs fine most of the time BUT there is one issue that we can not solve.
Sometime DB2 table is being used by some other processes, or in other words two different processes are trying to access same table and rows and the situation is what termed as CONTENTION. So one of those processes will fail and finally only one will succeed. We don't have a control over this DB2 source, and don't know what other processes might be running on it.
Our problem is SSIS fails and doesn't returns any error in the log file for this Contention situation. We only know it when our application reports that certain data is missing OR we check that DTS failed on some step (not neccesarily on same always), but then error log doesn't gives us any error message.
Could anyone please analyze and instruct if there are some ways in SSIS 2005 to catch such errors, or to avoid such situations. Feel free to write questions if you have any.
Regards
View 1 Replies
View Related
Feb 21, 2007
On my laptop I've got SQL2005 developper edition SP1 with 3 SSIS-jobs scheduled through SQL-agent.
These 3 SSIS-jobs are in fact maintenance plans which are also used on our production SQLServers.
These take backups (full, transactional), Cleanup old backups, reorganize indexes, update stats ...
One of these jobs runs every hour to take transaction logbackups. After installing SP2 this started failing.
When I opened the sources of that job in visual studio It seemed like the unit of thime was changed for cleanup jobs fe cleanup bak-files after 4 days changed into after 4 hours. The backup task for transactional backups which had the property to do that for all databases whas changed into specific databases which no database selected.
Even when I changed that into All databases and saved it, when I opened that backup task again, this was changed back into specific databases with no database selected.
I uninstalled SQL2005 and reinstalled it, including SP1 and everything works well again.
Does anyone know how to solve this.
View 6 Replies
View Related
Mar 7, 2008
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain.
Your help will be very helpfull since this is the production issues.
Thanks,
Ashok
View 4 Replies
View Related
Jun 29, 2006
hi !
I was able to run the PAckage successfully under local server. but when i deployed to another server and tried to run it fails.
When i run through the command line in another server -
I also tried running under File system and through Agent
Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
It does not execute the pacakge itself
When i run the package from my machine it executes the pacakge but fails at the end saying
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
Any help!!
Thanks,
Jasmine
View 1 Replies
View Related
Sep 20, 2007
SQL server agent has to be executed form a user other than windows admin. A SSIS where an excel file is loaded into a SQL Server table has to be scheduled by a job.SSIS runs fine alone in the server but fails when called by agent job. http://support.microsoft.com/?kbid=918760#appliesto article has this specific error described but in a 64 bit server this error cannot be rectified. Any ideas?
View 1 Replies
View Related
Apr 3, 2014
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
View 3 Replies
View Related
Feb 7, 2007
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
View 4 Replies
View Related
May 9, 2007
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
View 4 Replies
View Related
Jan 30, 2007
Hi,
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I followed Article ID: 918760 but did not help.
I need this to be resolved asap.
Any quick help, much appreciated.
Thx
Murali
View 4 Replies
View Related
Mar 20, 2008
This has only started happening in the last two days
When we invoke our SSIS package from a web service it used to work fine but now gives the following error. the DLL name changes all the time. Any help would be appreciated
Code SnippetSystem.IO.FileNotFoundException: Could not find file 'C:WINDOWSTEMPvrjeaanf.dll'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Evidence evidence)
at System.Web.Services.Protocols.XmlReturn.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.XmlReturnWriter.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.MimeFormatter.GetInitializers(Type type, LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.HttpServerType..ctor(Type type)
at System.Web.Services.Protocols.HttpServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
View 5 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
Dec 27, 2007
Hello,
I have the following scenario, and my main question is why Excel Formatted file errors out while TXT formatted file does not? Any workaround would be helpful, but I do want to avoid dtexec, and still want to manage it as SSIS.
MAIN ISSUES - permission issue & excel connection issue
SSIS Package Run Directly (not SQL Job, not automated)
* Every format and and folder location works!
Package Run under SQL JOB
TXT Format
A. Project Folder - GOOD
B. Client Folder - FAILS!
Conclusion - TXT Format works, but Client Folder does not have sufficient permission for PRODsvcSQLDMS
EXCEL Format
A. Project Folder - FAILS!
B. Client Folder - FAILS!
Conclusion - EXCEL Format DOES NOT work. Maybe SSIS Excel Connection Bug.
SQL Build 9.00.2153.00
-Lawrence
View 9 Replies
View Related
Sep 6, 2006
Im getting the following error when I try to export from Oracle 9i and import into SQL Server 2005 using Oracle and SQL OLE DB Provider's respectively.
Cannot retrieve the column code page infor from the OLE DB Provider. If the component supports the "DefaultCodePage" property, the code page from that property value will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
I know there is a way to change the property settings for the OLE DB Provider in the Data flow section of the development studio BUT ...
1) Is there a way to change this outside of the development studio?
2) I can't create the package to setup in the studio because even when I uncheck execute immediately and check save package, it still fails and never creates anything.
Any help is much appreciated
Thanks
Scott
View 2 Replies
View Related
Oct 16, 2006
I need some help from you on a problem with SQL Server Agent that I believe many of you have experienced. When searching on the web I find some loose answers, but it would not solve my problems. So here is my story.
1. I have created two SSIS packages, package 1 and package 2. Both packages have a Execute SQL Task making a select sql statement to a table, say Customer in AdventureWorks DB. Package1 also makes a Execute Pacakge Task to Package 2. Both packages have protectionlevel property set to EncryptSensitiveWithUserKey
2. Then I created two package configuration files per package, one indirect xml configuration and one xml configuration file. The former I created an environment variable called pack1, which was specifying the path and file name of second config file. Likewise, I did for package2. Maybe I could have reused thie first configuration file, but I am not sure since package1 calls package2.
3. Now I build and deploy my packages. Then I run my manifest file, going through the deployment wizard setting the necceccary properties like server name, user, password, I have also create the same environment variables on the deployment machine. I ensure that the package1 and package2 can be run under integration services (file system). And both package works. So far so good
4. Now I want to create a SQL server agent job that runs package1 and package2. Here I found an article that decribed How to Schedule and Run a SSIS package ( DTS ) Job in SQL Server 2005 http://www.codeproject.com/useritems/Schedule__Run__SSIS__DTS.asp
5. I created a job executor account and then Create SQL proxy account and associate proxy account with job executor account as described. I created a new ssis job, specifying type ssis integration services, run as proxy, setting package source to SSIS package store, naming the server and package name (package2).
6. Now, I try running job1 which runs package2. ANd it works. I was aware if I needed to give file permission on users (read and execute) on my dtsx/dtsconfig/log files. So far so good
7. Now, I try to run job test which runs package1 (which also runs package2). But now the job fails :-(. The job runs for some seconds, but fails. I have to say that I have some script tasks with message boxes inside!!! hope this doesn't matter. I have created all neccessary accounts, proxies, credentials and so on. here is the view history
Date 17.10.2006 00:50:53
Log Job History (test)
Step ID 1
Server ABEO-GEIR
Job Name test
Step Name test
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: abeo-geir
as_jobuser. The package execution failed. The step failed.
Continue: This error is well known for you. It has been mentioned in many postings. Well, how do I go from here. Setting logging on the job results in only this information
PackageStart,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:40,17.10.2006 00:59:40,0,0x,Beginning of package execution.
PackageEnd,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:41,17.10.2006 00:59:41,1,0x,End of package execution.
Well, I read some place that I could run the job as type operating system (cmdexec). Here i could not choose Run as, but had to select SQL SErver agent account. NOw I got this message
Date 17.10.2006 01:05:21
Log Job History (test)
Step ID 0
Server ABEO-GEIR
Job Name test
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (test).
As you see, I can't come any further. I NEED HELP FROM YOU. I AM STUCK. I know many of you have solved this and I hope you can guide me through thise. I don't know how many hours or days I have used on this.
Regards
Geir F
View 2 Replies
View Related
Jun 12, 2015
I have a simple SSIS package that imports an Excel Spreadsheet into a table. The column heading got changed, so the package failed, as expected, but I would like an alert or some way to make the scheduled job show "failed". I tried putting an event handler on the :Data Flow" step to send an email, but it didn't work.
I would like to figure out the event handler problem, but more important to have the job show as failed.
For some reason the Scheduled job shows "success" even though the SSIS package failed. A better solution is to make the scheduled job itself fail, based on the package failing.
View 2 Replies
View Related
Aug 11, 2015
I have a job that runs an SSIS package. The job seems to be able to run through the package successfully, but at the end it errors out saying "The binary code for the script is not found. ...". The script referred to is at the beginning part (not the very first step) and should already be run.
The thing is, I can manually run this package on the server or visual studio without any problem. Also this job has been run on a regular basis without any issues on our old SQL 2008. I'm migrating this to Amazon Cloud SQL 2014.
Together with this package are other two very similar ones. They all work fine. I just can't figure out what can be wrong with this one.
View 4 Replies
View Related
Oct 1, 2007
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
View 2 Replies
View Related
Feb 8, 2008
I have searched extensively and not been able to find a solution to this problem.
The problem:
We have one SSIS package will sometimes 'finish' executing (or crash from a .NET exception) when it certainly has not made its way through all of the data flow components. There are no SSIS error messages, no warnings, and it never happens at the same location in the package's pipeline. The only thing that is instantly visible is a command window that flashes on the screen and disappears too quickly to see anything,.
Sometimes the package does actually complete without any problem, but most of the time, it does not.
What we see:
If the packages is being run through the "Execute Package Utility" (by double clicking the dtsx file), after a bit, a command window flashes on the screen and instantly disappears (no text is visible), then the €œExecute Package Utility€? disappears. The event viewer of the machine then shows:
Source: .NET Runtime 2.0 Error
Category: None
Event ID: 1000
Type: Error
Description: Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module dtspipeline.dll, version 2005.90.3042.0, stamp 45cd721f, debug? 0, fault address 0x00019a66.
If the package is running within visual studio, again the command window flashes on the screen, then the "Execution has completed" prompt appears, but any "running" component remains Yellow (no red), both within the data flow and control flow (we do not have any event handlers set up). Neither our SQL Log provider, nor the "Execution Results" tab in visual studio show any type of error message... all SSIS messages just stop right in the middle of the many OnPipelineRowsSent log events (so there is no PackageEnd log event when this happens). The event viewer on the machine contains no useful messages when running within visual studio.
And other packages:
Are fine. This is only the case for this one package... we have nearly a dozen other packages, all very similar in design, that complete without issue.
We have also tried re-creating this troublesome package from scratch with no avail.
<!--[if !supportLineBreakNewLine]-->
About the package:
The Data Flow is pulling rows from 3 different external SQL data sources (400k-500k rows total), sorting and merging the rows, performing some basic lookups, then SCD'ing the results. This Data Flow is executed multiple times within 2 nested for loops (these nested loops give us particular dates, i.e. years 2000 through 2008, then months 1 through 12 for each year). There is not a single script task in the package. The problem seems to happen most as the data is being pulled from the sources and merged together, but it is not limited to this area.
<!--[if !supportLineBreakNewLine]--><!--[endif]-->
The environment:
We€™ve tried to use multiple machines with the same result. The current machine specs are as follows:
SQL Server 9.0.3042 (SP2)
Windows Server 2003 R2, Enterprise x64 Edition, SP2
3.00GHz x 16 processors, all 64 bit
63.5 GB of RAM
Over 1 terabyte of hard disk space
.NET 2.0.50727.42
The package was designed using:
Visual Studio 2005 with SP1
Microsoft SQL Server Integration Services Designer - Version 9.00.3042.00
Anyone have an idea? Thanks in advance.
View 6 Replies
View Related
Nov 28, 2007
Hello,
I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.
The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."
P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential
The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"
I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.
P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.
How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?
Thanks for help.
Lilia
View 18 Replies
View Related
May 13, 2008
I have one SSIS package that fails on occasion. And I can then run this in the job by itself after it fails and it runs fine. Any ideas? Any ideas on what is causing this. It is not every day but about once a week lately but it just happened again today to this is 2nd time in 4 days this has happened. It is always on this same part in the SSIS that it fails when it does fail. 4 times in last 2 weeks.
This step it is on here has a OLE DB - DB2 source and SQL server as destination. It does a couple data conversion, derived columns and then just copies the data from the db2 table to the sql server table.
Message
Executed as user: PERFORMANCEstacyadmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 6:06:12 AM Error: 2008-05-13 06:09:22.84 Code: 0xC0202071 Source: Copy SalesTender Retail TmpSalesTenderRetail [97] Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-05-13 06:09:23.42 Code: 0xC004701A Source: Copy SalesTender Retail DTS.Pipeline Description: component "TmpSalesTenderRetail" (97) failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:06:12 AM Finished: 6:09:23 AM Elapsed: 191.157 seconds. The package execution failed. The step failed.
Stacy
View 2 Replies
View Related
