SSIS Job Is Running With No Errors, But Doesn't Do Anything
Oct 4, 2007
I have a SSIS package that I have scheduled to run (under SQL Server Agent jobs) and when I check its history, it shows it being invoked regularly, and with no errors. The problem is, nothing is actually happening. I can load up the job in MS Visual Studio, and run it, and it runs fine, and takes care of the data transfer. The data is not getting transferred when it runs as a job under SQL Server Agent though the logs show that job was run, and completed with no errors.
I have another package that is similarly configured and does run correctly, and I have been checking the two packages to see what the difference in configuration is, but I don't see anything. All the package in question is, is a single foreach container that gets all the files in a directory, adds them as flatfiles to a database, and then moves them to an archiving directory.
View 3 Replies
ADVERTISEMENT
Dec 23, 2005
I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
View 7 Replies
View Related
Jan 11, 2008
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
View 2 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Sep 27, 2007
When clicking to open SQL SERVER CONFIGURATION MGR I recieve the following....
MMC cannot open the file C:WindowsSystem32SQLServerManager.msc
This may be because the file does not exist, (it does)
is not an MMC console,
or was created by a later version of MMC
This may also be because you do not have sufficient access rights to the file.
I am stumped. This worked the other day.
thanks!
View 7 Replies
View Related
Feb 28, 2008
Hello:
I downloaded JDBC drivers SP3. When I tried to connect to the SQL Server, I get the following error:
An error occured while establishing the connection.
Type: java.sql.SQLException Error Code: 0 SQL State: 08001
Message:
[Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
The connection string is:jdbcqlserver://VENKI-2008:1433;databaseName=MedDRA.
The following drivers are loaded:
msbase.jar
mssqlserver.jar
msutil.jar
Thanks for your help.
Venki
View 3 Replies
View Related
Jan 22, 2008
Hi everybody,
I have a very strange problem. I have installed MS WS2003 SP2 and MS SQL 9.0.3054 SP2.
I have database dbTraceIT with data file on D drive and log file on E drive. If I run T-SQL command:
use dbTraceIT
go
dbcc checkdb
or Integration Services Package (task: Check Database Integrity Task, developed with MS VS)
this comand/or task has generated the hard disk errors on D drive. The chkdsk tool reports errors when hdd index verification has been completed. After hdd errors€™ repairing, if I run checkdb T-sql command the situation is repeated again.
Question: is it a bug or something different? Do you have similar disk error if you use e.g. Integration Service Packages (for instance index rebuild or whatever)?
Regards,
Dariusz
PS
Steps to reproduce
Find any DB on your MS SQL. Run chkdsk command on hard drive where DB€™s data file is stored. Verify that everything is OK.
Run t-sql command
use dbTraceIT
go
dbcc checkdb
3. Run chkdsk again. It should show hdd errors.
View 20 Replies
View Related
Sep 25, 2007
I'm experiencing some frustration with my active/passive SQL cluster not running my .DTSX packages. I am hoping someone can shed some light on what I need to do.
I've created some .DTSX packages with the SQL Server Business Intel Dev Studio. I initially built & tested these packages in a non-SQL cluster environment without any problems. I'm now re-creating them to work on our SQL cluster. If I run the package through the Dev Studio it works great.
The packages basically grab .txt files from one of the shared drives (which is a resource of the sql cluster group) and imports the data into the one of the databases. The database does not have any special settings (right-click -> new database... -> enter name -> click ok).
I've setup a SQL Server Agent Job with 1 step with the following properties.
Step name: I Offices
Type: SQL Server Integration Services Package
Run as: SQL Agent Service Account
Package source: File system
Package: G:ImportRAGFLOffices.dtsx
When I run the SQL Server Agent Job through MSSQL Server Management Studio (right-click -> start job) I get an error on "Execute job 'RAGFL TestJob'".
These are the 2 messages that show up when I view the history of the SQL Server Agent job.
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 0
Server BADBOYS
Job Name RAGFL TestJob
Step Name (Job outcome)
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (I Offices).
***********************************************************************************************
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 1
Server BADBOYS
Job Name RAGFL TestJob
Step Name I Offices
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: THEISLANDAdministrator. The package execution failed. The step failed.
***********************************************************************************************
THEISLAND is our internal domain.
View 2 Replies
View Related
Apr 21, 2007
When I execute a long running procedure, I get timeout errors when other users try to execute other procedures with UPDATE or INSERT statements.
I suspect that the other procedures are trying to execute DML statements on tables that are locked by the long running procedure.
I have a sharred trigger on all my tables that creates and updates records in tables AuditLogDetails and AuditLogParent for keeping a log of modifications. I suspect that tables AuditoLogDetails and AuditLogParent are locked by the long running procedure.
How can I change the LOCKING behavior of the long running procedure to fix the time out errors that I get?
The long running procedure is displayed below.
ALTER PROCEDURE [dbo].[spPostPresenceToHistory2]
@PostDate DateTime,
@Department Int,
@Division Int,
@Testing Bit = 0,
@XDoc xml OUTPUT,
@XDoc2 xml OUTPUT,
@ModifierID varchar(20),
@Comment varchar(200)
AS
BEGIN
BEGIN TRANSACTION
DECLARE @PostCount Int,@PreCount Int,@DiffCount Int
IF @Testing=1
BEGIN
PRINT 'DELETE FROM History2_Presence'
EXEC sp_SetPostingProperties 'History2_Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM History2_Presence
IF EXISTS(SELECT E.ID FROM History2_Personel E WHERE E.PostDate=@PostDate)
BEGIN
DELETE FROM History2_Presence FROM History2_Presence H
INNER JOIN History2_Personel Ps ON H.Personel_ID=Ps.ID AND Ps.PostDate=@PostDate
WHERE Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division AND H.Date_de_Presence=@PostDate
AND EXISTS (SELECT P.ID FROM Presence P
WHERE (P.Date_de_Presence=@PostDate AND P.Personel_ID=H.Personel_ID AND P.Travaille_de_Jour=H.Travaille_de_Jour) OR (P.ID=H.ID))
END
ELSE
BEGIN
DELETE FROM History2_Presence FROM History2_Presence H
INNER JOIN Personel As Ps ON H.Personel_ID=Ps.ID
WHERE Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division AND H.Date_de_Presence=@PostDate
AND EXISTS (SELECT P.ID FROM Presence P
WHERE (P.Date_de_Presence=@PostDate AND P.Personel_ID=H.Personel_ID AND P.Travaille_de_Jour=H.Travaille_de_Jour) OR (P.ID=H.ID))
END
SELECT @PostCount=COUNT(*) FROM History2_Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PreCount-@PostCount
SET @XDoc2.modify('
insert <Table Name="History2_Presence" RecordDeleted="{ sql:variable("@DiffCount") }"/> as last into /Deleted_Records[1]
')
END
END
PRINT 'INSERT INTO History2_Presence'
EXEC sp_SetPostingProperties 'History2_Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM History2_Presence
INSERT INTO [dbo].[History2_Presence]
([ID]
,[User_ID]
,[Personel_ID]
,[Date_de_Presence]
,[Category_Motif_ID]
,[DateEntre]
,[Category_TypeDePresence_ID]
,[Travaille_de_Jour]
,[Heur_Supplementaire_Travaille]
,[prime_transport]
,[Tarif]
,[Jour_Travaille]
,[Montant_Supplementaire_Par_Heur]
,[Salair_par_Jour]
,[Salair_Minimum]
,[IsAutomaticRec])
SELECT [P].[ID]
,[P].[User_ID]
,[P].[Personel_ID]
,[P].[Date_de_Presence]
,[P].[Category_Motif_ID]
,[P].[DateEntre]
,[P].[Category_TypeDePresence_ID]
,[P].[Travaille_de_Jour]
,[P].[Heur_Supplementaire_Travaille]
,[P].[prime_transport]
,[P].[Tarif]
,[P].[Jour_Travaille]
,[P].[Montant_Supplementaire_Par_Heur]
,[P].[Salair_par_Jour]
,[P].[Salair_Minimum]
,[P].[IsAutomaticRec]
FROM [dbo].[Presence] AS P
INNER JOIN Personel As Ps ON P.Personel_ID=Ps.ID
WHERE P.Date_de_Presence=@PostDate AND Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division
AND NOT EXISTS
(SELECT HP.ID FROM History2_Presence HP
WHERE (HP.Date_de_Presence=@PostDate AND HP.Personel_ID=P.Personel_ID AND HP.Travaille_de_Jour=P.Travaille_de_Jour) OR (HP.ID=P.ID))
SELECT @PostCount=COUNT(*) FROM History2_Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PostCount-@PreCount
SET @xdoc.modify('
insert <Table Name="History2_Presence" RecordAdded="{ sql:variable("@DiffCount") }"/> as last into /Inserted_Records[1]
')
END
IF @Testing=0
BEGIN
PRINT 'DELETE FROM Presence'
EXEC sp_SetPostingProperties 'Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM Presence
DELETE FROM Presence FROM Presence P
INNER JOIN Personel As Ps ON P.Personel_ID=Ps.ID
WHERE P.Date_de_Presence=@PostDate AND Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division
AND EXISTS
(SELECT HP.ID FROM History2_Presence HP
WHERE (HP.Date_de_Presence=@PostDate AND HP.Personel_ID=P.Personel_ID AND HP.Travaille_de_Jour=P.Travaille_de_Jour) OR (HP.ID=P.ID))
SELECT @PostCount=COUNT(*) FROM Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PreCount-@PostCount
SET @XDoc2.modify('
insert <Table Name="Presence" RecordDeleted="{ sql:variable("@DiffCount") }"/> as last into /Deleted_Records[1]
')
END
END
COMMIT TRANSACTION
END
View 1 Replies
View Related
Feb 15, 2007
Hi,
I'm having trouble with a Script Component in a data flow task. I have code that does a SqlCommand.ExecuteReader() call that throws an 'Object reference not set to an instance of an object' error. Thing is, the SqlCommand.ExecuteReader() call is already inside a Try..Catch block. Essentially I have two questions regarding this error:
a) Why doesn't my Catch block catch the exception?
b) I've made sure that my SqlCommand object and the SqlConnection property that it uses are properly instantiated, and the query is correct. Any ideas on why it is throwing that exception?
Hope someone could help.
View 3 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Feb 26, 2007
Greetings,
I have an SSIS package composed of several sequence containers; each of these executes fine if I individually right-click them and select "Execute" - however, when I press F5 (but it did in the beginning) none of them executes :|
Any ideas why this happens?
Thanks in advance :)
View 4 Replies
View Related
May 4, 2007
Hi,
I am trying to have my old DTS packages working on SSIS. The first basic package I have, simply copied all tables/views and sp from one database to another one, quite like a backup/restore.
I converted this DTS package onto dtsx, tried to run it in VS2005, and it appears that the package just bcp from source to destination without dropping the dest table first.
I have checked that the parameter dropObjectsFirst was set to 'true' and ExistingData was set to 'replace'.
From the profiler, it seems that the data is appended each time in the table.
I am sure there's a small workaround to make that package working!
thank you in advance,
View 3 Replies
View Related
Sep 28, 2006
Hi *,
I'm trying to import a flat file with ~3500 rows into a SQL-DB. SSIS extracts only around half the rows. It leaves out every 2nd row. Anyone had this problem before?
Thanks!
View 1 Replies
View Related
May 3, 2006
I have this SSIS package which just doesn't seem to run when executing as a sql job and I keep getting this error:
"The command line parameters are invalid. The step failed."
I read some of the comments in forums and they were suggesting to verify the command line for the sql job since there is known bug in the command line for sql job.
But that didn't seem to resolve it and the reason could be one of the variable values that I am trying to set.
In this package one of the variables that I am trying to set is the connection string and my command line looks like this
dtexec /SQL "TestPkg" /SERVER [SVRNAME] /MAXCONCURRENT "-1" /CHECKPOINTING OFF
/SET " package.variables[User::MetaDataConnectionString].Value";"Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;"
When I try to run this from the command line I get the error as:
Argument " package.variables[User::MetaDataConnectionString].Value;Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;""
for option "set" is not valid.
I think the issue is in the set parameter where it seems to be intepreting the ;'s in the connection string as part of its command (which I seem to be escaping by putting them in quotes but it seems to be stripping them off)
Has anyone else encountered this issue? Is there any other escape character that I should be using?
Any help will be greatly appreciated.
View 5 Replies
View Related
May 9, 2006
Got following error in windows app event log when tried to start SSIS after applying sql2k5 sp1, event id is 260:
Microsoft SSIS Service failed to start.
Error: Method 'GetVersionInfo' in type 'Microsoft.SqlServer.Dts.Server.DtsServer' from assembly 'MsDtsSrvr, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
Anyone got same issue and how to solve it?
View 1 Replies
View Related
Jun 6, 2007
Hello !
Please, this is an urgent call; May be someone issued the sama probleb I do :
When I'm trying to import a XML file, that contains diffgram, using the XML Source task in SSIS, I choose an Inline Schema Option - everything goes well...the tables and columns are displayed, and the Import task into a Database's table succeds.
The problem is that , it doesn't load any data into the table, though there are plenty .
View 3 Replies
View Related
May 2, 2006
Hi everyone,
I've a problem which I think a lot of SQL Server 2005 users had already ...however I didn't found any answers so far. Maybe anyone of you might know.
I have installed SP1 for SQL Server 2005 on 2 systems, one is an Enterprise Edition (english) on a Win. 2003 SP1 system and one is a Developer Edition (also english) on a Win. XP Prof. system.
On both systems the installation process of the SP1 worked fine except that it gave me the message "Reboot required" on the step installation of SQL Server Native Client.
After my reboot I reexecuted the installation of SP1 with the result of no error nor reboot message. Everything seemed fine....
However when I checked the status of the services I recognized that the SSIS has switched from LOG ON AS ...my specific login.... to NT AUTHORITYNetworkService and the automatic startup failed.
I tried to change the login to my previous login which also failed. It tried to change it to any other possible login but the startup with all logins failed with the error message:
The service did not respond to the start or control request in a timely fashion.
The event log of the system does tell me the same error message. The summary log of the SP1 installation doesn't show any error or warning message except "Failed to read registry key: Debug". Enclosed is the log file:
05/02/2006 22:11:09.609 ================================================================================
05/02/2006 22:11:09.625 Hotfix package launched
05/02/2006 22:17:22.296 Attempting to install instance: SQL Server Native Client
05/02/2006 22:17:22.312 Attempting to install target: MHPA0F7C
05/02/2006 22:17:22.312 Attempting to install file: sqlncli.msi
05/02/2006 22:17:22.328 Attempting to install file: e:de43f41a74855a4cfc41014b760758HotFixSqlncliFilessqlncli.msi
05/02/2006 22:17:22.328 Creating MSI install log file at: D:WINNTHotfixRedist9LogsRedist9_Hotfix_KB913090_sqlncli.msi.log
05/02/2006 22:17:22.343 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
05/02/2006 22:17:22.343 Failed to read registry key: Debug
05/02/2006 22:17:38.437 MSP returned 3010: A restart is required to complete the install. This message is indicative of a success. This does not include installs where the ForceReboot action is run. This error code is not available on Windows Installer version 1.0.
05/02/2006 22:17:38.515 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
05/02/2006 22:17:38.515 Failed to read registry key: Debug
05/02/2006 22:17:38.515 Pending reboot, successfully installed file: e:de43f41a74855a4cfc41014b760758HotFixSqlncliFilessqlncli.msi
05/02/2006 22:17:38.515 Successfully installed target: MHPA0F7C
05/02/2006 22:17:38.515 Successfully installed instance: SQL Server Native Client
05/02/2006 22:17:38.515
05/02/2006 22:17:38.515 Product Status Summary:
05/02/2006 22:17:38.515 Product: SQL Server Native Client
05/02/2006 22:17:38.515 SQL Server Native Client (RTM ) - Reboot Required
05/02/2006 22:17:38.515
05/02/2006 22:17:38.515 Product: Setup Support Files
05/02/2006 22:17:38.515 Setup Support Files (RTM ) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.531 Product: Database Services
05/02/2006 22:17:38.531 Database Services (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531 Analysis Services (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531 Reporting Services (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.531 Product: Notification Services
05/02/2006 22:17:38.531 Notification Services (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.531 Product: Integration Services
05/02/2006 22:17:38.531 Integration Services (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.531 Product: Client Components
05/02/2006 22:17:38.531 Client Components (RTM 1399 ENU) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.531 Product: MSXML 6.0 Parser
05/02/2006 22:17:38.531 MSXML 6.0 Parser (RTM ) - Not Applied
05/02/2006 22:17:38.531
05/02/2006 22:17:38.562 Product: SQLXML4
05/02/2006 22:17:38.593 SQLXML4 (RTM ) - Not Applied
05/02/2006 22:17:38.687
05/02/2006 22:17:38.687 Product: Backward Compatibility
05/02/2006 22:17:38.687 Backward Compatibility (RTM ) - Not Applied
05/02/2006 22:17:38.687
05/02/2006 22:17:38.687 Product: Microsoft SQL Server VSS Writer
05/02/2006 22:17:38.687 Microsoft SQL Server VSS Writer (RTM ) - Not Applied
05/02/2006 22:17:38.687
I know there are a lot more LOG files in the directory ..HotFix.. which might tell more about the problem. However I don't know in which file I have to look.
Can anyone help me?
Regards,
Stefan
View 8 Replies
View Related
May 1, 2015
I have a T-SQL Statement Task to create table every time the package run. It doesn't return error but it doesn't drop the table either. The data is appended every time. The code is working fine in SQL server query window.
IF OBJECT_ID (N'M020_Vendor', N'U') IS NOT NULL
DROP TABLE M020_Vendor
GO
SET ANSI_NULLS ON
GO
[code]....
View 7 Replies
View Related
Jul 23, 2007
Hello,
I created ssis package to transfer tables from one DB to another.
However, I don't find the option where I can make that the transfer with the indexes and pks of the tables. in sql2000 I had this option.
appriciate your help.
Kubyustus
View 9 Replies
View Related
Aug 1, 2007
hi,
I am trying to use SSIS package to trasfer data and hitting road block for
[SQL Server Destination [37]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
How can i resolve this!!
thanks
View 2 Replies
View Related
Dec 14, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using the following line command "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 4 Replies
View Related
May 9, 2007
Hi There,
I am trying to set a variable with this default value using expression. This works in tsql but doesn't in ssis. Can anybody tell me what is wrong with this?
dateadd("dd", -1, datediff("dd", 0, getdate()))
Thanks.
View 8 Replies
View Related
Sep 10, 2007
I have been getting a recurring error while running the folowing script from an SSIS package. I have bolded the parts that I think may be of use. I didn't know if this would be a T-SQL or SSIS question, but thanks in advance for help.
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "declare @dbname varchar(200)declare @mSql1 varchar(8000)
DECLARE DBName_Cursor CURSOR FOR
select name
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name
OPEN DBName_Cursor
FETCH NEXT FROM DBName_Cursor INTO @dbname
WHILE @@FETCH_STATUS = 0
BEGIN
Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select b.name as USERName, c.name as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbName+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'
--Print @mSql1
Execute (@mSql1)
FETCH NEXT FROM DBName_Cursor INTO @dbname
END
CLOSE DBName_Cursor
DEALLOCATE DBName_Cursor
" failed with the following error: "Line 15: Incorrect syntax near '2003'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL Task 1
View 4 Replies
View Related
Nov 27, 2006
We have deployed an SSIS package successfully to production. We needed to apply SP1 to fix a different issue and now have encountered a new problem. We have numerous Data Reader Sources in different Data Flow Tasks that connect to a IBM iSeries (DB2) source. Pretty simple extracts that have worked fine in the past. They pump the data into staging tables on the SQL2K5 instance running the package (64-bit).
After we applied SP1 however, all of the Data Reader tasks fail AFTER they successfully copy the records with the following error.
[iSeries Invoice Details [1]] Error: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
If I delete the source and destination and recreate identical transforms, they work fine, but I don't feel like rebuilding all of the extracts. Any ideas! The problem occurs in all environments that we've tried.
TIA,
Michael Shugarman
P.S. I just tried the SP2 CTP, but that doesn't fix the problem.
View 2 Replies
View Related
Sep 20, 2006
When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?
The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.
Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?
View 6 Replies
View Related
Sep 24, 2007
Hello,
I'm getting the following error running a package...
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message
ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
09/24/2007 15:00:00,Hourly Extract From OReSA,Error,0,INHSCTSTTOMVM82,Hourly Extract From OReSA,(Job outcome),,The
job failed. The Job was invoked by Schedule 7 (Hourly). The last step to run was step 1 (OReSA
Extract).,00:00:59,0,0,,,,0
09/24/2007 15:00:01,Hourly Extract From OReSA,Error,1,INHSCTSTTOMVM82,Hourly Extract From OReSA,OReSA
Extract,,Executed as user: INENVts_hia. hod call failed. End Error Error: 2007-09-24 15:00:58.93 Code:
0xC0047017 Source: dtProduceExtractFiles DTS.Pipeline Description: component "ole_srcExtractDB" (22) failed
validation and returned error code 0xC020801C. End Error Error: 2007-09-24 15:00:58.93 Code: 0xC004700C
Source: dtProduceExtractFiles DTS.Pipeline Description: One or more component failed validation. End Error
Error: 2007-09-24 15:00:58.93 Code: 0xC0024107 Source: dtProduceExtractFiles Description: There were
errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started:
3:00:01 PM Finished: 3:00:58 PM Elapsed: 57.75 seconds. The package execution failed. The step
failed.,00:00:58,0,0,,,,0
But it works on other machines and other SSIS packages are running ok on the offending box.
Any ideas?
Thanks in advance,
Tony.
View 4 Replies
View Related
Sep 10, 2007
I have been getting a recurring error while running the folowing script from an SSIS package. I have bolded the parts that I think may be of use. I didn't know if this would be a T-SQL or SSIS question, but thanks in advance for help.
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "declare @dbname varchar(200)declare @mSql1 varchar(8000)
DECLARE DBName_Cursor CURSOR FOR
select name
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name
OPEN DBName_Cursor
FETCH NEXT FROM DBName_Cursor INTO @dbname
WHILE @@FETCH_STATUS = 0
BEGIN
Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select b.name as USERName, c.name as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbName+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'
--Print @mSql1
Execute (@mSql1)
FETCH NEXT FROM DBName_Cursor INTO @dbname
END
CLOSE DBName_Cursor
DEALLOCATE DBName_Cursor
" failed with the following error: "Line 15: Incorrect syntax near '2003'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL Task 1
View 5 Replies
View Related
Feb 4, 2008
Hi, I'm trying to set up an SSIS which uses a few VB scripts. I'm having an issue with the connections.
I have an existing SSIS which runs a few SQL stored proceedures and this works fine.
The script I am having an issue with returns the following error
'
at System.Data.Common.DbConnectionOptions.ParseInternal(Hashtable parsetable, String connectionString, Boolean buildChain, Hashtable synonyms, Boolean firstKey)
at System.Data.Common.DbConnectionOptions..ctor(String connectionString, Hashtable synonyms, Boolean useOdbcRules)
at System.Data.SqlClient.SqlConnectionString..ctor(String connectionString)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnectionOptions(String connectionString, DbConnectionOptions previous)
at System.Data.ProviderBase.DbConnectionFactory.GetConnectionPoolGroup(String connectionString, DbConnectionPoolGroupOptions poolOptions, DbConnectionOptions& userConnectionOptions)
at System.Data.SqlClient.SqlConnection.ConnectionString_Set(String value)
at System.Data.SqlClient.SqlConnection.set_ConnectionString(String value)
at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
at ScriptTask_dbe60b31acf14201b5f012a4f1c608c2.ScriptMain.GetAppParameterCMD(String strParamaterName) in dts://Scripts/ScriptTask_dbe60b31acf14201b5f012a4f1c608c2/ScriptMain:line 49
at ScriptTask_dbe60b31acf14201b5f012a4f1c608c2.ScriptMain.Main() in dts://Scripts/ScriptTask_dbe60b31acf14201b5f012a4f1c608c2/ScriptMain:line 27
'
connection string is as follows.
ConnectionInfo= "Data Source=SQLM002Cdev;User ID=SQLCallManUser;Initial Catalog=Callmanager;Provider=SQLNCLI.1;Persist Security Info=True;Auto Translate=False;
I have checked the UserID has the correct permissions on the dbo
Any ideas?
View 1 Replies
View Related
Jul 20, 2006
Hi All,
I am having a couple of problems with an SSIS package. The first is whenever I add a Data Viewer to one of my data flow tasks it crashes Visual Studio. This happens every single time. I have tried rebooting, but that didn't help. The second error I am getting is whenever I call ComponentMetaData.GetErrorDescription(Row.ErrorCode) from within a data flow script task it generates a "Catastrophic Failure" and indicates that it occurred when calling the GetErrorDescription method. I am not sure if something is corrupted or what the issue is. Does anyone have any insight?
Thanks,
Justin
View 3 Replies
View Related
Oct 16, 2006
I got an SSIS package
that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.
Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?
View 8 Replies
View Related
Nov 6, 2015
I am trying to load a simple Excel file into a Database table and the SSIS Package is not loading any records beyond 3233 records. I am just surprised. I tried using the "IMEX=1" mentioned in some of the online resources but it didn't work. I am using an Excel Source, a Data Conversion Transformation and an OLEDB Destination in my package in SQL Server 2014 (which is pretty simple and straightforward).The Excel file I am trying to load can be found here.
And, here is my table structure.
CREATE TABLE [gov].[loan_limits](
[FIPS_State_Code] [varchar](3) NOT NULL,
[FIPS_County_Code] [varchar](3) NOT NULL,
[County_Name] [varchar](50) NOT NULL,
[State] [varchar](2) NOT NULL,
[CBSA_Number] [varchar](6) NOT NULL,
[code]...
View 7 Replies
View Related
Sep 5, 2007
Hi,
I developed SSIS Data Flow Component and placed dll file into the DTSPipelinecomponents. Then I registered the component in the GAC.
But when I try to add the required component into toolbox that there is not this one in the list of SSIS Data Flow Items. What does it mean?
Thanks in advance.
View 3 Replies
View Related
