SSIS Load Data - Capture Error

Jul 24, 2015

I want to create a SSIS package as follows

Conditions
If there are about 100 records in text file, if there is an error at 43 and at 67 record respectively , it should capture 43 and 67 record in failure folder and remaining 98 records , should be processed

1) Successful record into table and move the success record from the folder
to new path say( Success folder) (98 records to table)
2) Unsuccessful records to new path (Failure folder) (2 lines )
3) Error message to capture the failed records and store them in another folder(Error log) (2 line failure information)

While writing the 3rd condition to error log table , it has to point out the record which is failed for what reason, say it may be due to invalid data type for column 10 for 43 record, and incorrect syntax error at 67 record.

View 9 Replies


ADVERTISEMENT

Capture Data From Excel File And Load Into Staging Table - Annual Count

Jul 31, 2013

I am working on an HR project and I have one final component that I am stuck on.

I have an Excel File that is loaded into a folder every month.

I have built a package that captures the data from the excel file and loads it into a staging table (transforming a few bits of data).

I then combine it with another table in a view.

I have another package that loads that view into a Master table and I have added a Slowly Changing Dimension so that it only updates what has been changed. (it’s a table of all employees, positions, hire dates, term dates etc).

Our HR wants to have this data in a report (with charts and tables) and they wanted it to be in a familiar format. So I made a data connection with Excel loading the data into a series of pivot tables.

I have one final component that i cant seem to figure out. At the end of every year I need to capture a count of all Active Employees and all Termed employees for that year. Just a count.

So the data will look like this.

|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |

The data is in one table labeled [EEMaster]. To test the count I have the following.

SELECT COUNT([PersNo]) AS HistoricalHC
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Active'

this returns the HistoricalHC for 2013 as 418.

SELECT COUNT([PersNo]) AS NumbOfTermEE
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Withdrawn' AND [TermYear] = '2013'

This returns the Number of Termed employees for 2013 as 42.

I have created a table to report from called [dbo.TORateFY] that I have manually entered previous years data into.

|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |

I need a script (or possibly a couple of scripts) that will add the numbers every year with the year that the data came from.

(so on Dec 31st this package will run and add |2013|418|42| to the next row, and so on.

View 20 Replies View Related

Load A SSIS Package Via Web Service: The Package Failed To Load Due To Error 0xC0011008 Error Loading From XML.WHAT IS THAT?

May 19, 2006

Hello,

I have a big problem and i'm not able to find any hint on the Network.

I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)

I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.

I imported the dtsx file inside my "Stored Packages".

I would like to load and run the package programmatically on a Remote Scenario using the web services.

I created a solution with web service and web page that invoke the web service.

When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)

I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.

The error message doesn't help so much and there is nothing on the www to give me and advice....

Is it a SSIS problem???

Thank you for any help!!

Marina B.



View 10 Replies View Related

CDS ( Change Data Capture) In SSIS

Oct 17, 2007

Is there a built in functionality to do the CDS in SSIS 2005? if not, what is the best way to do this in ssis 2005?

View 2 Replies View Related

How Do You Implement Change Data Capture In SSIS Or SQL Server 2005?

Dec 3, 2007



Hi All,
I am now working on the design phase of my project, we are looking to implement Change Data Capture (CDC) but i need some help if you guys has implemented before using the SSIS 2005 componets. I am trying to use the Following:

Source---------Derived Column---------Lookup---------------Conditional Split (to split New records and Updated Records)-----------Destination. Respectively.
Lets make it clear, my source holds (Old records and newly added or Updated records), the Derived Column is to Derive new columns called Insert_Date and Update_Date. The Lookup i am Using is to look the Fact_Table(the Old Records) as Reference, and then based on this lookup i will split the records on timely based using the Conditional Split. My question is
1. Am i using the right components?
2. what consideration should i have to see to make it true (some Logics on the conditional split)?
3. Any script which helps in this strategy?
4. If you have a better idea please try to help me, i need you help badly.

Thank you,

SamiDC

View 11 Replies View Related

Need To Capture Actual Data In Row On Error To Flat File

Sep 18, 2007

Let me preface by saying I am not very familiar with SSIS.

Ideally, since the Transfer SQL Server Objects task can do all tables, I would like to use it to copy only data from one server to a new server that has the tables pre-created. When I encounter any kind of error, in addition to the error information provided by SSIS, I also need the actual row data.

If using the Transfer Object task can't do that, how would I loop through all the tables on an OLEDB source and capture the same error information on the destination? I figured out how to do the Data Flow a table with a redirect error output but that does not give me the actual row data.

View 7 Replies View Related

T-SQL (SS2K8) :: Load Data From Flat File Source Into OleDB Destination By Changing Data Types In SSIS

Apr 16, 2014

I have an source file and i have to load it into the data base by changing datatype of the columns in ssis

View 1 Replies View Related

Use SSIS To Load Data Into CRM 3.0

Jan 18, 2007

Hi,

I have a little experience with SSIS (but a lot with DTS) and none with CRM 3.0.

Is it possible to use SSIS to import flat files into CRM 3.0 ?

And how ?

I read something that CRM 3.0 uses SQL server 2000. Should I upgrade it SQL server 2005 ?

Any suggestion where to read about this ?

Thanks in advance

Constantijn Enders

View 15 Replies View Related

Load Data Using ADO.NET In SSIS

Nov 8, 2006

Hi,

How to extract and Load Data using ADO.NET in SSIS.i hope to extract data we have DataReader source .but how to load (Insert) data with ADO.NET ?.and is ADO.Net  quicker than OLEDB ?

Thanks

Jegan.T

 

View 5 Replies View Related

SSIS Load From Server Throwing Non-specific Error

Apr 11, 2008

My BIDS installation is able to create new projects and open saved ones, but if i try to add an existing package from a remote server, it throws the error pasted below. I can see the package list, but once i choose the package, hit ok, then hit ok to load it, I get the error. I can open the same package on a different computer, so it's not user rights related. Below the error is version info. Thanks in advance for any help you might be able to give!

===================================
One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.
(Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.LoadFromSqlServer(String packagePath, String serverName, String serverUserName, String serverPassword, IDTSEvents events)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.<>c__DisplayClassa.<LoadPackageFromSql>b__9(String password, IDTSEvents events)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.LoadPackageWithPassword(PackageLoader loader, IWin32Window dialogParent, String& packagePassword)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.LoadPackageFromSql(String packagePath, String server, String sqlUserName, String sqlServerPassword, IWin32Window dialogParent, String& packagePassword)
at Microsoft.DataTransformationServices.Controls.PackageLocationControl.LoadPackage(String& packagePassword)
at Microsoft.DataTransformationServices.Project.Controls.AddExistingPackageForm.AddExistingPackage()
at Microsoft.DataTransformationServices.Project.Controls.AddExistingPackageForm.AddExistingPackageForm_FormClosing(Object sender, FormClosingEventArgs e)
===================================
One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.

------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadFromSQLServer(String bstrPackagePath, String bstrServerName, String bstrServerUserName, String bstrServerPassword, Boolean bLoadNeutral, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.LoadFromSqlServer(String packagePath, String serverName, String serverUserName, String serverPassword, IDTSEvents events)




Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727

Installed Edition: IDE Standard
Microsoft Visual Studio 2005 Tools for Applications

SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.3042.00

SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00

SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.3042.00

View 1 Replies View Related

Scheduling SSIS Data Load Package

Feb 14, 2008

I have created a package that loads data . I need advice on a quik way to schedule this baby .

Regards to ALL

View 1 Replies View Related

SSIS Pkg Run Successfully But Data Does Not Load Compelety..

Apr 18, 2007

I have this data in a flat file and I'm doing a data dump to a SQL table. I created a SSIS package which ran successfully but only exporting 2 rows out of 4 rows to the SQL table. For some reason my package ignore two other rows where "col4", "col5" and "col6" do not have any data. No conditional component was used in this package to not to load those records.



col1 col2 col3 col4 col4 col5 col6

849833 02/15/06 841 VS 791 49 7
849819 02/15/06 212 NA

949070 02/15/06 230 ABS

700010 02/15/06 820 VS 690 46 6



Any idea? Thanks.

View 8 Replies View Related

SSIS XML Source , Doesn't Load Any Data

Jun 6, 2007





Hello !



Please, this is an urgent call; May be someone issued the sama probleb I do :



When I'm trying to import a XML file, that contains diffgram, using the XML Source task in SSIS, I choose an Inline Schema Option - everything goes well...the tables and columns are displayed, and the Import task into a Database's table succeds.



The problem is that , it doesn't load any data into the table, though there are plenty .

View 3 Replies View Related

To Program Between The Process Of Load Of Data In SSIS

Jun 23, 2006

It is possible to program part of the process of load of data within the SSIS. The origin is a Flat file (.txt and .dat) and the destiny a SQL Server 2005. All the fields of the file are not mapean origin with the destiny table and data are needed other tables that are in the Data Base.

View 1 Replies View Related

SQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing

Jun 3, 2014

I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?

View 5 Replies View Related

SSIS Package Failing During Bulk Load - Without Useful Error Code

May 4, 2007

I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -





[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.





How can I debug this further to see what's going wrong?

View 1 Replies View Related

SSIS Package Fails To Load With Error Loading Value &&<DTS:PropertyExpression ...

Jul 17, 2007

Good day all,



I am having an interesting SSIS problem where the package fails to load with the following error message:

Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".


This very same package runs on our test server, but fails to even load on UAT server.

SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.

This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).



Any help is greatly appreciated.



Thanks,

Alex



Here is the compete output from DTExec:




Code Snippet

D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds







View 7 Replies View Related

Transact SQL :: How To Load Data From Excel To Database Without Using SSIS Package

May 26, 2015

I have 5 tables in Academy database. Like

Academy details tables, Academy Students table, Academy Student Parents table, Academy class Section Table, Academy Staff table.

I have created the tables and data into the database. And Now I need to prepare a Excel sheet to upload data into the these tables. How to prepare the Xlsx sheet and how to upload into database without using SSIS package.

View 15 Replies View Related

Using SSIS Package To Dynamically Load Data From Database Into Three Separate Flat File

Jul 24, 2015

I have three tables in data base:

customer
product
sales

And i want to use SSIS package dynamically load data from database into three separate flat file, each table into each file.

I know i got to use for each loop task ADO.Net schema row set enumerator, with OLEDB connection manager, select table name or view name variable from access mode list, but the problem comes, as table name is dynamic then flat file connection is also dynamic, i am using visual studio 2013...

View 5 Replies View Related

Integration Services :: Working On SSIS To Load Data From Flat File To Server

Jun 17, 2015

I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.

View 4 Replies View Related

SSIS Data Flow Task Fails To Load All Text From Flat File

Jan 2, 2007

Hi Guys,

I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.

The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.

Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.

Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.

I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.

Any suggestions how I can get it to load the full data?

Thanks

View 26 Replies View Related

OLEDB Data Load Error

Dec 28, 2006

HI,

Inside SSIS's Dataflow task, i'm getting data using ODBC connection(in DataReader Source) for an iSeries library and trying to insert that into DB2 database (using OLEDB destination ). Mappings etc work absolutely fine,but on execution get error as given below:

How do i resolve this error and load data in DB2 , Need help at the earliest.

Thanks in Advance

Amit S



Here is the ERROR Message:

SSIS package "Package.dtsx" starting.

Information: 0x4004300A at Data Reader to DB2, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Reader to DB2, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Reader to DB2, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Data Reader to DB2, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at Data Reader to DB2, OLE DB Destination [12]: An OLE DB error has occurred. Error code: 0x80040E53.

Error: 0xC0047022 at Data Reader to DB2, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (12) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

Error: 0xC0047021 at Data Reader to DB2, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.

Information: 0x40043008 at Data Reader to DB2, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Data Reader to DB2, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Data Reader to DB2, DTS.Pipeline: "component "OLE DB Destination" (12)" wrote 0 rows.

Task failed: Data Reader to DB2

SSIS package "Package.dtsx" finished: Success.

View 17 Replies View Related

Integration Services :: Automate Process Using SSIS To Create Tables In Corresponding Database And Load Data

Oct 6, 2015

We are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.

Accounting2014, Accounting2015 in AccountingDB; 
Sales2014, Sales2015 in SalesDB; 
Products2014, Products2015 in ProductsDB; 
Inventory2014, Inventory2015 in InventoryDB etc....

These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....

View 6 Replies View Related

Integration Services :: Running SSIS Package To Load Data - Communication Link Failure

Aug 20, 2015

I am looking for solution for "Communication link failure"  since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.

Below is the complete error description when job failed.

OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
 SQL server 2008 R2 Enterprise Edition and error description is below,

Started:  6:22:40 AM  Error: 2015-08-19 18:50:32.70     Code: 0xC0202009     
Source: Data Flow Task Lookup [193]     
Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. 
Error code: 0x80004005.  An OLE DB record is available.  

[Code] ....

View 5 Replies View Related

Bulk Load Data Conversion Error, And More...

Jul 13, 2007

hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:

CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)


An example data file looks like this:

InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943

So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:

9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""

3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile
DATAFILETYPE = 'char'
FIELDTERMINATOR=' '
ROWTERMINATOR='
'
KEEPNULLS
)

As a result of the above configuration I get this:


Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.

Dimitris Chrysomallis

View 4 Replies View Related

Bulk Load Data Conversion Error. And More...

Jul 13, 2007

Hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:

CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)


An example data file looks like this:

InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943

So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:

9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""

3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile,
DATAFILETYPE = 'char',
FIELDTERMINATOR=' ',
ROWTERMINATOR='
',
KEEPNULLS
)

As a result of the above configuration I get this:


Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.

Dimitris Chrysomallis

View 5 Replies View Related

Integration Services :: SSIS - Data Load To Excel - How To Retain Trailing Spaces In Text Column

May 8, 2015

I am loading data using SSIS 2008 from a table in SQL Server 2008 DB to excel 97 sheet pre-defined with column headers. All the columns in excel is has 'Text' format property and the columns in the SQL Server table are defined as nVarchar. One of the columns has trailing spaces in few rows in DB but after exporting to excel 97, the spaces are gone. We need to retain the whitespaces in the column values. How can we do that.

View 3 Replies View Related

Integration Services :: Handling Empty Text File Load Into Table Through SSIS Data Flow?

Jun 16, 2015

We have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing. 

The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.

View 3 Replies View Related

Not Able To Load The Application In Case Web Farm Garden When We Load Data Through Background Thread.

Dec 14, 2007

Hi,

Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.

Please help us.

Ajay Kumar Dwivedi

View 1 Replies View Related

BULK INSERT ERROR Using Format File - Bulk Load Data Conversion Error

Jun 29, 2015

I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?

Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')

[code]...

View 5 Replies View Related

SQL Server 2012 :: Bulk Load Data Conversion Error (truncation)

May 15, 2014

Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.

I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.

View 5 Replies View Related

Could Not Load Type 'System.Data.Sqlserverce.sqlcecommand' Error In A PDA Application

Dec 25, 2007



Hi,

I am developing a Application using SQLCE Database & VS 2005 for Intermec CN3 PDA
It is having Windows Mobile 5.0 OS and ARM920T PXA27x Processor.

I have already installed
Microsoft .NET CF 2.0,
Microsoft SQL Client 2.0 ( using %Program Files%Microsoft SQL Server Compact Editionv3.1SDKinwce500armv4isqlce30.wce5.armv4i.CAB file) in PDA

I could able to run the application in the development environment which is having
Windows XP OS.
Microsoft .NET Compact framework 2.0,
SQL Server 2005 Compact edition

But when I deploy the application in the PDA thro' cab file and try to run the application I am getting the below error at run time.

Could not load type
'System.Data.Sqlserverce.sqlcecommand' from assembly System.Data.Sqlserverce, version=9.0.242.0,culture=neutral,PublickeyToken=8984...'

I have added the SQLCE.dll from the below location

%Program Files%Microsoft SQL Server Compact Editionv3.1System.Data.SqlServerCe.dll

Anybody can suggest me to solve this issue.

Thanks in advance

With Regards,
D.Karthikeyan

View 3 Replies View Related

Load All Data Without Knowing Old One Was Load In The Previous Time???

Apr 27, 2007

I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???



I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?



Thank

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved