SSIS Package Challenge!!!
Jun 21, 2007
Hi All, Need to accomplish this in SSIS...if someone can point me the flow tips or how to proceed would sincerely appreciate it. The OwnerRecord_1 owns RecordA and RecordB....and so on...the owner record follows the details records
Flat File Input
RecordA...........
RecordB..................
OwnerRecord_1
RecordC.................
RecordD.................
OwnerRecord_2
..............
Output Solution:
TableA
ID Records OwnerID
1 RecordA 7
2 RecordB 7
3 RecordC 8
4 RecordD 8
TableB
OwnerID Desc:
7 OwnerRecord_1
8 OwnerRecord_2
TIA
View 4 Replies
ADVERTISEMENT
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
Oct 29, 2007
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
View 3 Replies
View Related
Jan 4, 2008
Dear Friends,
I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database.
How you think is the better way to do that?
Using a FlatFileSource to read the file and a script to save the value into a SSIS variable?
Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable.
How the best way you suggest?!
Regards!!
Thanks.
View 18 Replies
View Related
Oct 3, 2007
I would like to see if someone can help me out.
Scenarion:
1.- SSIS Package execute tasks on 2000 SQL Server Database
2.- Execution takes places using Business Intelligence Studio
Question:
1.- How can I tracked that SQl 2000 tasks took place using a SSIS Package?
Thanks
View 1 Replies
View Related
Oct 4, 2006
I just don't have the skills to work this out...maybe there is an SQL guru out there that can solve this:I can't work out how to do a recursive query so I'm using this function:Public Shared Function FindFriendsFriends(ByVal userID As Integer)Dim iUserID As Integer = userIDDim friendAdapter As New TableAdapters.FriendsTableAdapterDim oFriends As New FrontEnd.FriendsFriendsDataTableDim oTemp As New Data.DataTableDim oContainer As New Data.DataTableoFriends = friendAdapter.GetFriendsByUserID(iUserID)For InLoopCounter As Integer = 0 To oFriends.Count - 1oTemp = friendAdapter.GetFriendsByUserID(oFriends.Rows(0)("UserID"))oContainer.Merge(oTemp)NextReturn oContainerEnd FunctionWith this SQL statement in the table adapter is:SELECT tblFriends.FriendHashID, tblFriends.cCreated, tblFriends.UserOwnerID, tblUsers.UserID, tblUsers.Displayname, tblUsers.EmailAddress, tblFriends.RequestStatus, tblFriends.FriendUserID, tblUsers.ProfilePhoto FROM tblFriends INNER JOIN tblUsers ON tblFriends.FriendUserID = tblUsers.UserID WHERE (tblFriends.UserOwnerID = @UserID) AND (tblFriends.RequestStatus = 2) UNION SELECT tblFriends_1.FriendHashID, tblFriends_1.cCreated, tblFriends_1.UserOwnerID, tblUsers_1.UserID, tblUsers_1.Displayname, tblUsers_1.EmailAddress, tblFriends_1.RequestStatus, tblFriends_1.FriendUserID, tblUsers_1.ProfilePhoto FROM tblFriends AS tblFriends_1 INNER JOIN tblUsers AS tblUsers_1 ON tblFriends_1.UserOwnerID = tblUsers_1.UserID WHERE (tblFriends_1.RequestStatus = 2) AND (tblFriends_1.FriendUserID = @UserID)I want to replace the SQL statement with a recursive query that I simply pass the UserID to and get rid of the function which is very inefficient!
View 2 Replies
View Related
Sep 2, 2004
Ok, here's the problem. I have CA's Unicenter ServiceIT Enterprise Edition 5.0 running on a production box that has NT4 (SP6) and SQL server 2000 running on it.
Just before we continue, this is about backing up the database that ServiceIT connects to.
I know that you can schedule EM to make backup's of a specific database over a certain time, but this is part of the problem. What i have since discovered is that ServiceIT will not run on a database backed up and restored by EM.
It will however run on the restored backup created through the dos command pdm_backup (comes with ServiceIT).
What i am trying to figure out is to try a find a way that i can run a dos prompt command to do the following tasks at a specific time of day:
Stop the Paradigm Server Daemons (service)
Run a DBCC CHECKDB on the database AHDTEST50.
If there are no errors, create a verbose backup using the dos command pdm_backup -v -fC:ackup[todaysdate]
If there are errors run a script to correct them, then run a backup
Restart the Paradigm Server Daemons
View 5 Replies
View Related
Aug 2, 2007
How can i programmatically via Tsql change the datatype of all the columns of a table to varchar(1000)???
Like I have a table employee
Employee
(
colA int
colB int
colC varchar
)
If i run the tsql..
it should give me
Employee
(
colA varchar
colB varchar
colC varchar
)
View 5 Replies
View Related
Jan 8, 2008
Hello guy!
I wrote a stored procedure that searches for user on my table depending on the search option chosen by the person doing the search. But my challenge is displaying users without a picture. On my members table, i used -1 to indicate a user that doesn't have or set his/her picture, this makes it difficult for me to track that person when the person searching chooses to display members with or without pictures. What happen is that my inner join of the photos table dat reference the user primarypictureid does not exist in the photos table. How do i overcome this challenge. My script
CREATE PROCEDURE [dbo].[spSearchMember]
@username nvarchar(30),
@searchfor char(1),
@firstage int,
@secondage int,
@countryid varchar(50),
@withpicture nvarchar(5)
AS
IF(@withpicture = 'False')
SET @withpicture = '%[0-9]'
IF (@withpicture = 'True')
SET @withpicture = '%[0-9][^-]'
IF(@countryId = '-1')
SET @countryid = '%'
BEGIN
SELECT m.UserName, m.MemberId, m.Gender, m.PrimaryPictureId, DATEDIFF(year,m.BirthDate,GETDATE()) AS 'Age',
c.CountryName, p.PicFileName
FROM Members AS m
INNER JOIN Photos AS p
ON m.PrimaryPictureId = p.PictureId
INNER JOIN Countries AS c
ON m.CountryId = c.CountryId
WHERE (m.Gender = @searchfor) AND (DATEDIFF(year,m.BirthDate,GETDATE()) BETWEEN @firstage AND @secondage)
AND (m.CountryId LIKE @countryid) AND (p.PictureId LIKE @withpicture) AND (m.UserName <> @username)
ORDER BY m.BirthDate ASC
END
Thank!!!!!
View 5 Replies
View Related
Aug 26, 2005
I have a challenge for all DBAs. I am getting INCONSISTENT TIMINGS for Querry Results from a SQL Server 2000 Standard Edition on a HP Proliant 2 CPU Server with 4 GB RAM and SCSI DrivAFAe.
Our Database is 72 million records and have 8 columns. Most of them are indexed, which are used in the “Where…� clause. In addition to independent indexes, we also have a covering index for 3 most frequently searched fields.
My challenge is that out of the 7000 odd queries that hit the server with various search conditions in a Week, 5% of the queries return result in less than a minute.
The same query at a different Time or with a different Value, returns results inconsistently. For e.g. searching FirstName = “Anna�; LastName = “Williams� returns result in 0.01 sec. Searching for FirstName “Benjamin�; LastName = “Watson� returns in 5 minutes.
Any kind of help is welcome and will be highly appreciated.
- Santy
san.rely@gmail.comNote: Edited to fix white on white font.
View 1 Replies
View Related
Jun 14, 2001
I have a query that I am trying to optimize. It works on some 9000 records and runs too slow. What the query does is takes the multiple assignment of a single contact record to multiple attributes (a.k.a many-to-many). For example:
Membership table.
Contact_ID
1
2
3
Relate table
1 1
1 3
1 4
Relate Item
1 item1
2 item2
3 item3
4 item4
The query will take all ocurrences of the related items and place them in a single field while delimiting by comma "item1" , "item3", "item4"
Here is the query as it exists now:
select
CONTACT_ID,
UNION_NAME
into #tmp
from MEM_UN MU
inner join MEM_UN_REL MUR
on MU.UNION_ID = MUR.UNION_ID
order by CONTACT_ID, UNION_NAME
create TABLE #unionlist (
CONTACT_ID int primary key,
UNIONS varchar(2000) null)
insert into #unionlist (CONTACT_ID, UNIONS)
select distinct CONTACT_ID, UNIONS = '' from MEMBERSHIP
while exists(select CONTACT_ID from #tmp)
BEGIN
update #unionlist
set UNIONS = UNIONS + '"' + (
select min(UNION_NAME) from #tmp
where #unionlist.CONTACT_ID = #tmp.CONTACT_ID
) + '",'
where CONTACT_ID in (select CONTACT_ID from #tmp)
update #unionlist
set UNIONS = UNIONS + '"",'
where CONTACT_ID not in (select CONTACT_ID FROM #tmp)
delete FROM #tmp where UNION_NAME in (
select min(UNION_NAME) from #tmp tmp2
where #tmp.CONTACT_ID = tmp2.CONTACT_ID
)
END
I believe that the slow down is in the process of deleting from #tmp every time it loops through the recordset.
Any suggestions appreciated,
Thx,
Dave
View 1 Replies
View Related
Mar 27, 1999
On march 23, Micorosoft was supposed to benchmarch their SQL server 7.0 versus Oracle 8i. I didn't watch the benchmark... I figured that I would be able to read about it in the news. But it seems like there is some moritorium on the subject. I haven't found any result information whatsoever.
Does anybody know who won the challenge? Did microsoft win $1 million from oracle?
Tom Mack, MCSE
Database Administrator
Advancia Corporation
View 2 Replies
View Related
Jul 12, 2005
We're having to work with some legacy data. The tables in the so-called database seem to have way more nulls than actual data. One table appears to have around 100 or more columns in it. It has close to 40,000 rows.
This Db has pretty much 0 normalization present.
IOW, your worst nightmare.
Is there a way we could run a query that would return the total number cells inthat contain NULL and another that could return the total number of data-bearing cells so we could come up with a % or a ratio.
View 9 Replies
View Related
Sep 7, 2004
Hello Everybody,
I am attaching a picture of what the table should look like before and after the transformation. Can anybody help? Thank you in advance.
View 2 Replies
View Related
Nov 9, 2004
Hi guys!
Can anyone tell how I can parse the WHERE clause of an SQL statement to check for special characters such as ''' (single quotes) in fields of type varchar?
thanks
nelo
View 2 Replies
View Related
