SSIS Package Fails/Does Not Complete Without Reason, Likely Due To A .NET 2.0 Exception
Feb 8, 2008
I have searched extensively and not been able to find a solution to this problem.
The problem:
We have one SSIS package will sometimes 'finish' executing (or crash from a .NET exception) when it certainly has not made its way through all of the data flow components. There are no SSIS error messages, no warnings, and it never happens at the same location in the package's pipeline. The only thing that is instantly visible is a command window that flashes on the screen and disappears too quickly to see anything,.
Sometimes the package does actually complete without any problem, but most of the time, it does not.
What we see:
If the packages is being run through the "Execute Package Utility" (by double clicking the dtsx file), after a bit, a command window flashes on the screen and instantly disappears (no text is visible), then the €œExecute Package Utility€? disappears. The event viewer of the machine then shows:
Source: .NET Runtime 2.0 Error
Category: None
Event ID: 1000
Type: Error
Description: Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module dtspipeline.dll, version 2005.90.3042.0, stamp 45cd721f, debug? 0, fault address 0x00019a66.
If the package is running within visual studio, again the command window flashes on the screen, then the "Execution has completed" prompt appears, but any "running" component remains Yellow (no red), both within the data flow and control flow (we do not have any event handlers set up). Neither our SQL Log provider, nor the "Execution Results" tab in visual studio show any type of error message... all SSIS messages just stop right in the middle of the many OnPipelineRowsSent log events (so there is no PackageEnd log event when this happens). The event viewer on the machine contains no useful messages when running within visual studio.
And other packages:
Are fine. This is only the case for this one package... we have nearly a dozen other packages, all very similar in design, that complete without issue.
We have also tried re-creating this troublesome package from scratch with no avail.
<!--[if !supportLineBreakNewLine]-->
About the package:
The Data Flow is pulling rows from 3 different external SQL data sources (400k-500k rows total), sorting and merging the rows, performing some basic lookups, then SCD'ing the results. This Data Flow is executed multiple times within 2 nested for loops (these nested loops give us particular dates, i.e. years 2000 through 2008, then months 1 through 12 for each year). There is not a single script task in the package. The problem seems to happen most as the data is being pulled from the sources and merged together, but it is not limited to this area.
<!--[if !supportLineBreakNewLine]--><!--[endif]-->
The environment:
We€™ve tried to use multiple machines with the same result. The current machine specs are as follows:
SQL Server 9.0.3042 (SP2)
Windows Server 2003 R2, Enterprise x64 Edition, SP2
3.00GHz x 16 processors, all 64 bit
63.5 GB of RAM
Over 1 terabyte of hard disk space
.NET 2.0.50727.42
The package was designed using:
Visual Studio 2005 with SP1
Microsoft SQL Server Integration Services Designer - Version 9.00.3042.00
Anyone have an idea? Thanks in advance.
View 6 Replies
ADVERTISEMENT
Apr 16, 2008
Hi,
I have one SSIS package which is written in Visual studio business intelligence tool. For that SSIS packages i have scheduled a job from SQL server management studio 2005. I mean i have scheduled a job in SQL server agent.
This job which i have scheduled contains 6 SSIS packages and the other 5 SSIS packages executes successfully but this only fails giving sone com.Interop exception.
But it is failing giving some com.interop exception. Not sure what type of error is this?
It give following type error:
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-27 23:00:00.81 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:00 PM Elapsed: 0.579 seconds. The package execution failed. The step failed.
I get the same error when i try to execute the package from Visual studio Business Intelligence tool.
Can you please help me out as to what is this "System.Runtime.InteropServices.COMException" exception occuring when scheduling or executing the job.
Thanks,
Ashok
View 1 Replies
View Related
Aug 11, 2015
I have a job that runs an SSIS package. The job seems to be able to run through the package successfully, but at the end it errors out saying "The binary code for the script is not found. ...". The script referred to is at the beginning part (not the very first step) and should already be run.
The thing is, I can manually run this package on the server or visual studio without any problem. Also this job has been run on a regular basis without any issues on our old SQL 2008. I'm migrating this to Amazon Cloud SQL 2014.
Together with this package are other two very similar ones. They all work fine. I just can't figure out what can be wrong with this one.
View 4 Replies
View Related
Aug 23, 2007
I have an SSIS Package that loads data from a log file. Prior to loading the data I need to prepare the file. I run a script that cleans the file. Then I import the flat file into SQL Server.
Log File Management Task
1. Run Unix Log File Task
2. Import the new log file (flat file) into SQL Server
Error
i.Unix.dtsx
Message: The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown.
Is this because the system is running out of memory? The RAM on the server is 4gb. Below is a sample of the script. The job doesn't always fail; there are times when the job executes with success and other times when it fails.
Script Source Code
-----------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Collections.Generic
Imports System.IO
Imports System.Text
Imports System.Diagnostics
Imports System.Globalization
Imports Microsoft.VisualBasic
Imports System.Text.RegularExpressions
Public Class ScriptMain
'********** Begin Error Log Settings **********
'Dim sSource As String = "i.SSIS.Unix.FileManager"
'Dim sLog As String = "Application"
'Dim sMachine As String = "."
'Dim ELog As New EventLog(sLog, sMachine, sSource)
'********** End Error Log Settings **********
Public Sub Main()
'variables for the unix log file
Dim newFile As String = "D:iLogunixlog.txt"
Dim copyFile As String = "\server16iLogunixlog.txt"
'variables for working log files
Dim oldFile As String = "D:i empunixlog.txt"
Dim difFile As String = "D:i empunixdiff.txt"
Dim trimdiff As String = "D:i empunixdifft.txt"
Dim formatTemp As String = "D:i empunixlog_formatted.txt"
Dim errorFile As String = "D:i empunixlog_bad.txt"
'delete unixlog.txt copy unixlog.txt
'if the file is on the local server delete it and copy the new file over
'if the file is not present copy the new file over
Try
If File.Exists(newFile) Then
File.Delete(newFile)
File.Copy(copyFile, newFile)
Else
File.Copy(copyFile, newFile)
End If
While Not File.Exists(newFile)
System.Threading.Thread.Sleep(1000)
End While
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'open the old file; read backwards until we reach the carriage
'return and store that "seek" position; now open the new file and
'seek to that stored position. finally, read the rest of the file
'and write that data to the difference file.
' determine position of last line in the old file
Dim lastLine As Long = GetLastLinePosition(oldFile)
' get all data in new file starting at position determined above
Dim fi As New FileInfo(newFile)
Dim buffer(fi.Length - lastLine) As Byte
Dim fs As New FileStream(newFile, FileMode.Open)
Try
fs.Seek(lastLine, SeekOrigin.Begin)
fs.Read(buffer, 0, buffer.Length)
fs.Close()
' write that new data to the difference file
fs = New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Write, FileShare.None)
fs.Write(buffer, 0, buffer.Length)
fs.Close()
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'remove the partial row from the difference file
Try
TrimFinal(difFile, trimdiff)
'ELog.WriteEntry("TrimFinal.Call.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Call.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'perform the file formatting
sFormatFile(trimdiff, formatTemp, errorFile)
'
Dts.TaskResult = Dts.Results.Success
End Sub
Function GetLastLinePosition(ByVal fileName As String) As Long
Dim pos As Long = -1
Dim fs As New FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
Try
fs.Seek(-2, SeekOrigin.End) ' -2 to skip a potential vbcrlf at the end of file
While fs.Position > 0
fs.Seek(-1, SeekOrigin.Current)
If fs.ReadByte = 10 Then
pos = fs.Position
Exit While
Else
fs.Seek(-1, SeekOrigin.Current)
End If
End While
fs.Close()
'ELog.WriteEntry("GetLastLinePosition.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("GetLastLinePosition.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
Return pos
End Function
Sub TrimFinal(ByVal difFile As String, ByVal trimdiff As String)
Dim fi2 As New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Read)
Dim fo2 As New FileStream(trimdiff, FileMode.OpenOrCreate, FileAccess.Write)
Dim sr2 As New StreamReader(fi2)
Dim sw2 As New StreamWriter(fo2)
Dim line2 As String
Try
Do While sr2.Peek <> -1
line2 = sr2.ReadLine()
If (sr2.Peek <> -1) Then
sw2.WriteLine(line2)
End If
Loop
sw2.Flush() : sw2.Close()
sr2.Close()
fi2.Close() : fo2.Close()
'ELog.WriteEntry("TrimFinal.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
End Sub
Sub sFormatFile(ByVal currentFile As String, ByVal tempFile As String, ByVal errorFile As String)
Dim tfp As New Microsoft.VisualBasic.FileIO.TextFieldParser(currentFile)
Dim sw As New System.IO.StreamWriter(tempFile)
Dim swErrorFile As New System.IO.StreamWriter(errorFile)
tfp.TextFieldType = FileIO.FieldType.Delimited
tfp.SetDelimiters(",")
tfp.HasFieldsEnclosedInQuotes = True
tfp.TrimWhiteSpace = True
Dim fields() As String
Try
While Not tfp.EndOfData
Try
fields = tfp.ReadFields()
If fields.Length <> 23 Then
'write bad rows to error-file
swErrorFile.WriteLine(String.Join(",", fields))
Else
If fields(3) = "" And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") And fields(3) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") _
And IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
Else
swErrorFile.WriteLine(String.Join(",", fields))
End If
End If
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.TFP.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
End Try
End While
tfp.Close()
sw.Close()
swErrorFile.Close()
File.Delete(currentFile)
File.Move(tempFile, currentFile)
'ELog.WriteEntry("sFormatFile.Success".ToString(), EventLogEntryType.SuccessAudit, 0, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
Finally
GC.Collect()
End Try
End Sub
End Class
-------------------------
Does my script seem okay for releasing the server memory usage?
Thanks.
View 1 Replies
View Related
Jan 11, 2008
Hi,
I have a package that has several FTP tasks in sequence:
[ftp task 1]->[ftp task 2]->[ftp task 3]->[ftp task 4]
[Ftp task 4] fails about 20% of the time, for no apparent reason. This is the error message I receive:
[FTP Task] Error: Unable to receive files using "FTP Connection Manager".
The problem is, it works most of the time (80%), but every 4 or 5 tries, it fails. This makes NO sense to me. Is this a bug perhaps?
Please help... should we use an ftp script instead, as the ftp task seems rather unreliable.
Thanks
View 5 Replies
View Related
Jan 25, 2008
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
View 9 Replies
View Related
Mar 12, 2008
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
View 13 Replies
View Related
Sep 27, 2006
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.
View 5 Replies
View Related
Apr 17, 2007
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
What am I missing??
Thanks
Mike Allen
View 7 Replies
View Related
Jun 20, 2006
Hey Folks,
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
Thanks and greez
Karsten
View 1 Replies
View Related
Mar 7, 2008
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain.
Your help will be very helpfull since this is the production issues.
Thanks,
Ashok
View 4 Replies
View Related
Jun 29, 2006
hi !
I was able to run the PAckage successfully under local server. but when i deployed to another server and tried to run it fails.
When i run through the command line in another server -
I also tried running under File system and through Agent
Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
It does not execute the pacakge itself
When i run the package from my machine it executes the pacakge but fails at the end saying
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
Any help!!
Thanks,
Jasmine
View 1 Replies
View Related
Apr 3, 2014
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
View 3 Replies
View Related
Feb 7, 2007
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
View 4 Replies
View Related
Jan 30, 2007
Hi,
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I followed Article ID: 918760 but did not help.
I need this to be resolved asap.
Any quick help, much appreciated.
Thx
Murali
View 4 Replies
View Related
Mar 20, 2008
This has only started happening in the last two days
When we invoke our SSIS package from a web service it used to work fine but now gives the following error. the DLL name changes all the time. Any help would be appreciated
Code SnippetSystem.IO.FileNotFoundException: Could not find file 'C:WINDOWSTEMPvrjeaanf.dll'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Evidence evidence)
at System.Web.Services.Protocols.XmlReturn.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.XmlReturnWriter.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.MimeFormatter.GetInitializers(Type type, LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.HttpServerType..ctor(Type type)
at System.Web.Services.Protocols.HttpServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
View 5 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
Oct 1, 2007
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
View 2 Replies
View Related
Nov 28, 2007
Hello,
I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.
The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."
P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential
The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"
I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.
P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.
How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?
Thanks for help.
Lilia
View 18 Replies
View Related
May 13, 2008
I have one SSIS package that fails on occasion. And I can then run this in the job by itself after it fails and it runs fine. Any ideas? Any ideas on what is causing this. It is not every day but about once a week lately but it just happened again today to this is 2nd time in 4 days this has happened. It is always on this same part in the SSIS that it fails when it does fail. 4 times in last 2 weeks.
This step it is on here has a OLE DB - DB2 source and SQL server as destination. It does a couple data conversion, derived columns and then just copies the data from the db2 table to the sql server table.
Message
Executed as user: PERFORMANCEstacyadmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 6:06:12 AM Error: 2008-05-13 06:09:22.84 Code: 0xC0202071 Source: Copy SalesTender Retail TmpSalesTenderRetail [97] Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-05-13 06:09:23.42 Code: 0xC004701A Source: Copy SalesTender Retail DTS.Pipeline Description: component "TmpSalesTenderRetail" (97) failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:06:12 AM Finished: 6:09:23 AM Elapsed: 191.157 seconds. The package execution failed. The step failed.
Stacy
View 2 Replies
View Related
Feb 21, 2008
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
View 3 Replies
View Related
Aug 5, 2005
I have a Job Step defined to execute a SSIS Package. This SSIS package contains a Script Task. The Job fails with the message "Package execution failed. The step failed."
View 23 Replies
View Related
Jun 14, 2007
I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).
The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
The entire SSIS package runs perfectly when i run it from my development environment.
I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.
But when I run the SQL Job, the Job fails immediately on Step 2.
Here is the error message in View History of the SQL Job:
-----------------------------------------------------------------------------
Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.
-----------------------------------------------------------------------------
Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?
thx very much/spirits.
seth j hersh
View 7 Replies
View Related
Oct 12, 2006
Ok so I created a SSIS package to get currency exchange rates from web service - http://www.webservicex.net/CurrencyConvertor.asmx . Everything works fine I can run it successfully - i uploaded to SSIS package store - runs successfully./
BUT when I put it in a job - it FREAKING fails every *dem time.
In addition to run it the JOB as SSIS package from store - also straight from the File System = still same freagging error - and SQL 2005 has gotten more stupid than SQL 2000 & DTS - they provide no clue as to y you get an error
Help please?
View 4 Replies
View Related
Aug 24, 2015
What is the best approach to run SSIS package (SQL Server 2008/2012/2014) automatically when it fails?
View 5 Replies
View Related
May 29, 2008
Hi There
We executed windows scheduled batch failes that execute as DOMAINuser1 to dtsexec packages.
I moved these packages to run in sql jobs.
The agent runs as local system. In order to get the packages to run since they are encryoted with DOMAINuser1 key.
I created a DOMAINuser1 credential and a proxy.
I execute the SSIS package job steps under this proxy.
One day it all works the next day they fail randomly with the "unable to decrypt with user key" error.
I am very familiar with this error, however it makes no sense, thses packges are not being touched, no one is altering them and perhaps saving them with different user keys. They are all encrypted with the DOMAINuser1 key. One day everything works the next day they fail.
A master package will run and in the middle of executing other package it suddenly gets this error, like the proxy suddenly stops working.
I have found nothing in the event logs?
Any ideas ?
View 6 Replies
View Related
Jun 6, 2006
I have a SSIS package that has a script component. In the script I reference a custom dll that contains some functions.
The dll is registerd with a strong name in the GAC on my machine and the SQL Server 2005 box.
The package works fine in Visual Studio. The problem lies when I deploy the package to the server. (note: several other packages created without the dll work fine on the server).
Is there something else that has to be configured on the server to be able to reference and use the custom dll?
Thanks for your help.
View 5 Replies
View Related
Feb 15, 2015
I have a package on the default instance which runs and completes successfully. When that package is moved to the same SQL server, but a different instance, running under the same service account, it fails. The error is below with some specific stuff removed:
Delete Data from Level 1:Error: Executing the query "-- Variable to capture FileID's
DECLARE @DeleteFil..." failed with the following error: "The DELETE permission was denied on the object '[name removed]', database '[]', schema '[]'.". Possible failure reasons:
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This makes me think that the package under the non-default instance ends up running under a different security context.
View 8 Replies
View Related
Feb 19, 2007
When I try to load an SSIS package via C# code I get the following error message:-
"The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
"
The code is pretty straightforward:-
Application app = new Application();
PackageEvents evts = new PackageEvents();
Package pkg = new Package();
Package pkg = app.LoadPackage("C:\Documents and Settings\dominic_s\My Documents\Visual Studio 2005\Projects\SSIS_Util\bin\Debug\DTS\Cleanup_Staging.dtsx",evts,true);
return pkg;
What's interesting is this error message only appear's when I Start Debugging (F5 in VS 2005). If I Start without Debuggging (CTRL+F5) I dont get this error message. I've tried almost everthing suggested by other posts in this forum related to the same issue but nothing seems to work.
Any help will be greatly appreciate...thanks!!!
View 4 Replies
View Related
Apr 10, 2007
I have an SSIS Package that executes a stored procedure. It turns out my stored procedure was missing.
However, the SQL Job Scheduler reported that step as success.
Can anyone tell me why?
`Le
View 8 Replies
View Related
Mar 31, 2015
I have a very anoying problem with SSIS. I've done new packages into same project, almost identical compared to old ones. They work well in visual studio, but I can't execute them using procedure. Old packages works just fine, but none of the new. Error message is in the end of my story.Visual Studio version is 9.0.30729.1 and SQL Server version is 10.0.4000.0. Is it possible, that these not not updated versions could cause this problem?Package ProtectionLevel is DonSaveSensitive.
Error messages, when package is executed by procedure:
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.1600.1 for 64-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
NULL
Started:Â 10:36:48 AM
Error: 2015-03-31 10:36:48.48
  Code: 0xC0016016
[code]...
View 11 Replies
View Related
May 29, 2008
Hello,
I've SQL Server running on 64 bit. When I schedule a package to run every night which has excel data transformation, it fails. Initally I had a problem running through BIDS also but then I found in project properties you can switch this off by specifying property Run64BitRuntime by false. After going through some forums, many have suggested that when scheduling a package, modify the command arguments to run as 32bit runtime. These command argumnents can be generated from making use of tool DTExecUI.exe Even after using generated command arguments from this tool, it doesn't help.
Below is my command argument and the error message generated.
/FILE "D:DevDWLoadAll.dtsx"
/CONFIGFILE "D:DevDWdevCongig.dtsConfig"
/CONNECTION "customers.dtsx";"D:DevDWcustomers.dtsx"
/CONNECTION "Addresses.dtsx";"D:DevDWAddresses.dtsx"
/CONNECTION "Counties.dtsx";"D:DevDWCounties.dtsx"
/CONNECTION "Countries.dtsx";"D:DevDWCountries.dtsx"
/CONNECTION "ExcelLoad.dtsx";"D:DevDWExcelLoad.dtsx"
/CONNECTION Test;""Data Source=TestDW;Initial Catalog=TestStagingDW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
Message
Executed as user: DWUserSQLServiceAcc. ...0.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 00:05:00 Error: 2008-05-28 00:06:02.31 Code: 0xC0202009 Source: Excel Load Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-05-28 00:06:02.31 Code: 0xC020801C Source: Copy Data Excel Source [5052] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.
Any suggestions???
Circuit
View 3 Replies
View Related
Jul 17, 2007
Good day all,
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds
View 7 Replies
View Related
