SSIS Package OLE DB Connection Issue
Mar 1, 2006
I am having a very frustrating issue--
Essentially I have a package with an OLE DB Connection manager and a Data Flow Task.
The OLE DB Connection points to my SQL Server (using SQL authentication with a user who has sysadmin and dbo access to the DB)
All the Data Flow Task has is an SQL OLE DB Transform that runs a
SELECT * FROM <Table>
Obviously, this package does nothing...but I have stripped it down for test purposes.
Long story....longer:
When I debug this package from my local computer, the package completes successfully.
However, when I build the package and import it as a job on the server, it fails when it runs.
I get the following error in the Event Log:
Login failed for user 'xxxxxx'. [CLIENT: <local machine>]
I enabled logging on my package; it says:
OnError,....The AcquireConnection method call to the connection manager "xxxxxx" failed with error code 0xC0202009
Why can I debug the package successfully on my computer, yet when the server runs the package, locally, it fails?
View 6 Replies
ADVERTISEMENT
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Mar 29, 2007
Both the OLE DB Connection and ADO.Net Connection in SSIS Package does not remember password.
Im connecting to a SQL Server 2000 box using its sa password as test.
The SSIS package runs fine when you first set up the connection in bids
The bottom line is that SSIS keeps forgetting the password I feed into
the two Connections that I'm using. I double-click a connection,
type the password in, check "Save my password" and hit "OK" but the
password disappears from there whenever I run the package or
double-click the connection again.
is there any known workaround for this issue as I would like to schedule my SSIS package using a SSIS Step in a SQL Server 2005 Agent job.
the only thing I found when googling this error was link below but the workaround described here is a little harsh
http://www.developersdex.com/sql/message.asp?p=1921&ID=%3C1146409399.447345.7470@j73g2000cwa.googlegroups.com%3E
thanks in advance
Dave
the box SSIS is running on is Windows 2003 Server Standard Edition latest service pack
SQL Server 2005 (no service packs )
View 14 Replies
View Related
Jun 4, 2008
[Connection manager "CLRDB_Connection"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'CLR.Test'.".
I got this error i cant resolve this. i deployed the package to other server using sql authentication. and i create the package using windows authentication on my local computer. i try to run my package in my local computer and i got this error.
View 2 Replies
View Related
Apr 27, 2008
Hi,
I am new to SSIS and i have to develop a ssis package which will run in a production machine through VB.Net(2003) exe.I am facing a problem while setting connection string of SSIS package dynamically.Can anybody help me on this?
View 1 Replies
View Related
Mar 13, 2008
I have created a SSIS package to import data from DBF files using a OLE DB Jet 4 driver, which works very well in Visual Studio, however doesn't work via a SQL Job. It states the the path isn't valid.
The file path in the connection manage is \servernamedbf (dbf being a shared folder I have permissions and security to)
The server is on another domain, which is trusted. I added the server's IP address to the host file and through windows explorer can navigate to the dbf folder with out a password prompt.
Why can't I get this to work???
Cheers
View 1 Replies
View Related
Aug 4, 2006
It seems there a lot of problems running SSIS packages under the sql agent. I have read the knowledgebase articles regarding permission issues etc but I still can't get my job to run. I can run any package as a job apart from a package that connects to an external database via an odbc connection. Has anyone had any luck with this and can let me in on the secret.
View 14 Replies
View Related
Feb 5, 2007
Hi!
I create a SSIS Package for ETL on my own machine. During development database was also on my machine. For access to this database an OLE DB connection was defined within a package in BI Development Studio. Everything worked well both in debug mode and testing package itself.
Finally I need to load data to a database on a different machine using this package.
I used several scenaries:
1) simply copied the package-file to estination machine, open it for execution, in section "Connection Managers" I edited connection string manually - changed server name and Initial Catalog. And try to execute.
2) on the destination machine I manually created an OLE DB connection (using Microsoft Data Link) to a different database (test succeded), Changed the extention of the connection file 'udl' for ' txt ' and copied its connection string to the field connection string in section "Connection Managers" (pointed in variant 1) ).
3) use Package Configurations, copied the deployment to destination machine, installed the package the way like written here - http://msdn2.microsoft.com/en-us/library/ms365338.aspx. Changed exported properties - Server name, Initial Catalog and also the whole Connection String. Also try to execute.
In all cases I recieved the same error execution message :
"Errors in the metadata manager. Either the database with ID of " OLD_DATABASE_NAME " does not exist in the server with ID of " NEW_SERVER_NAME " or the user does not have permissions to access the object."
As for access (username/pass) settings they are the same for both of them, I have the same administrative rights on both machines. And more with the same rights the ole db connection made was made manually in variant 2 - succeded!!! So I don't think the problem is here.
As for Error message - I think somewhere the OLD name of database (Initial Catalog) is saved, though I tried to change it. Though the NEW value for the server name is substituted.
Please, help me. I don't know what else can I try. And it is not a single case for my practice. So I think - something wrong in my actions.
View 9 Replies
View Related
Jul 19, 2007
Hi,
We are using a €śFlat File Connection Manager€? in our SSIS package.
The package fails occasionally while loading in the validation phase with the error
€ś-1073659899,0x,The connection type "FLATFILE" specified for connection manager "<some name>" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
This error is not returned always.
Also I feel €śFLATFILE€? is a valid type of connection manager. This value €śFLATFILE€? is inserted by the editor and not manually typed. This is a weird behavior of SSIS.
Sometimes I get this error with respect to some other connection manager used in the package as well. €śOLEDB€? is the type of that other connection manager.
Has anybody faced similar issue earlier?
Please let me know some thoughts, suggestions, and possible work-arounds to avoid this error as this is very critical for us.
Regards
Madhavan.TR
View 2 Replies
View Related
May 2, 2007
Hi,
I want to make a SSIS package with Oracle and deploy it in no of oracle databases, for it every time I have to open package and change connection information.
How can I make oracle connection information as variable value so that when I deploy my package on Oracle database it will pick all oracle connection information(User Id, Pwd, Server Name) automatically.
Please let me know about this.
Thanks
View 4 Replies
View Related
Jul 11, 2007
Hello All,
I'm new to SQL 2005. I am setting up some SSIS packages which will connect to an Oracle database and copy some tables from it. These packages will then be scheduled to run on a daily basis. Because they will run automatically, it is required that passwords be saved along with the connection string. However, even though the password is saved (and encrypted, I checked the .dtsx in notepad), when I run the package, the connection to Oracle fails. Only if I respecify the password does it run correctly. How can I correctly save this password so that I can schedule automatic execution? Thanks for any info.
View 5 Replies
View Related
Aug 6, 2015
I am trying to dynamically create the connection to a database within an SSIS package.
the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.
Is this possible, if so how?
View 0 Replies
View Related
Jun 19, 2006
Hi
I need help for Connection string:
Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.
we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.
because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.
Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?
Thanks & Regards
M.Jeyakumar
View 9 Replies
View Related
May 29, 2008
Hello,
I've SQL Server running on 64 bit. When I schedule a package to run every night which has excel data transformation, it fails. Initally I had a problem running through BIDS also but then I found in project properties you can switch this off by specifying property Run64BitRuntime by false. After going through some forums, many have suggested that when scheduling a package, modify the command arguments to run as 32bit runtime. These command argumnents can be generated from making use of tool DTExecUI.exe Even after using generated command arguments from this tool, it doesn't help.
Below is my command argument and the error message generated.
/FILE "D:DevDWLoadAll.dtsx"
/CONFIGFILE "D:DevDWdevCongig.dtsConfig"
/CONNECTION "customers.dtsx";"D:DevDWcustomers.dtsx"
/CONNECTION "Addresses.dtsx";"D:DevDWAddresses.dtsx"
/CONNECTION "Counties.dtsx";"D:DevDWCounties.dtsx"
/CONNECTION "Countries.dtsx";"D:DevDWCountries.dtsx"
/CONNECTION "ExcelLoad.dtsx";"D:DevDWExcelLoad.dtsx"
/CONNECTION Test;""Data Source=TestDW;Initial Catalog=TestStagingDW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
Message
Executed as user: DWUserSQLServiceAcc. ...0.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 00:05:00 Error: 2008-05-28 00:06:02.31 Code: 0xC0202009 Source: Excel Load Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-05-28 00:06:02.31 Code: 0xC020801C Source: Copy Data Excel Source [5052] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.
Any suggestions???
Circuit
View 3 Replies
View Related
May 8, 2008
I'm learning SSIS, and just started to use SSIS Package Configurations. I want to be able to switch between a dev and prod instance of our database.
I did not specify the password in the Configuration file (XML), figuring it would get it from the package itself. (That will be the same between dev and prod). But once I set up to use the Configuration, I started to get a "Login failed..." message. I added the password to the configuration, and it's the same. I quit using the configuration file at all, and then it works again.
This may be related, but when I show the properties on my connection, it shows stars for the password. When I go to the editor, the password field is blank, and if I test the connection, it fails. I type in the password, and then the connection works. I have the "Save my password" checked, but every time I go back, the password is blank. In fact, if I type in the password for the connection in the editor, and then go to the "All" page, the password is blank. It may be a red herring, but it sure looks like it's not really storing the password, and thus the Configuration file can't connect when it tries to get it. I can type in the password, test the connection (it works), close the editor dialog, open the editor dialog, test the connection again, and since the password is now blank, the connection fails.
What do I have to do to make that password actually stick!?
Without the Configuration file, when I save the package to SQLServer, it will run as a job, in spite of the password appearing to not stick. With the configuration file, it's not even running while still in Studio.
Here are at least some of the version information, which may or may not be useful.
Microsoft Visual Studio 2005
Version 8.0.50727.42
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft SQL Server Analysis Services Designer
Version 9.00.3042.00
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
Microsoft SQL Server Reporting Services Designers
Version 9.00.3042.00
SQL Prompt 3.5
Thank you for any help you can provide.
-thursday's geek
View 12 Replies
View Related
Oct 10, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
View 14 Replies
View Related
Aug 14, 2006
Hi There,
In SSIS package development environment, I was able to connect to an oracle database and pull data into my sql server database. I installed the client tools for oracle and I put an entry into the tnsnames.ora and I was able to connect.
But in production environment, if I deploy the package on sql server, I was wondering if I had to do the same job of downloading the oracle client tools onto my production machine --which creates a tnsnames.ora file to it default location and then edit it with tthe tns entry-- or is there a better way to do this--avoiding the download?
Can somebody plzz help me ?
Thanks.
View 10 Replies
View Related
Sep 29, 2015
We have a large number of SSISDB packages running happily, connecting to our SQL Servers using ADO.Net or Sql Native Client, making their connection using NTLM. (We don't have our SQL Server SPNs correctly configured to support Kerberos).
The SSISDB packages are hosted on and run on a dedicated SQL server, different to the SQL Servers they are connecting to.
Very occasionally, the connection attempt is made using Kerberos instead of NTLM, and the connection attempt to sql server fails. (This is going by the Windows Security event log, which reveals a Kerberos login - a successful one at the Windows level - at the precise time that the calling agent job is informed of a connection timeout and fails, approx 23 seconds after the job starts).
The correct configuration of our SPNs is something we may wish to look into for security best practice, and would of course fix this. However, that may not be my decision to make.
View 2 Replies
View Related
Sep 14, 2007
Hi,
After I had transfered SSIS package to another PC I tried to open package and I got an error. ".. Failed to decrypt protected XML node "PackagePassword" with error . ".
It turned out, that the password wasn't saved in a OLEDB connection manager of the Package. However "save password" options checked!
But password field was empty.
As soos as I enter password the package executes successfully.
Question: How can I transfer a password for OLEDB Connection within a SSIS package to another developer's VS2005?
View 4 Replies
View Related
Jul 12, 2012
I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.
Also  in package i used ADO.net  as source for  *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.
View 8 Replies
View Related
Jul 15, 2015
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
View 6 Replies
View Related
Jun 30, 2006
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
View 24 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Jun 29, 2006
I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
thanks
aa
View 1 Replies
View Related
Apr 26, 2006
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
Thanks in advance for your help.
View 1 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
