I'm having some trouble with a new SQL 2005 Server. Database mail is configured/enabled. I've used SSIS to create a package that exports data to an Excel spreadsheet and e-mails the file to a user (currently, me).
The Send Mail Task will send a message with the file attached from SSIS while debugging the package but once the package is compiled (no errors compiling) and executed from a job, I don't get the mail message. SQL Server Agent reports successful completion of the job.
I decided to add the Send Mail step as an Execute SQL Task which calls the sp_send_dbmail proc. I can send mail with the attached file from Query Analyzer using sp_send_dbmail. It sends the message successfully in debug mode within SSIS as well. However, once compiled and deployed, it fails to send the message when called from a job. Again, SQL Server Agent reports successful completion of the job but the e-mail never comes.
MSSQL and SQL Server Agent are running under a domain account that is a local admin and member of the sysadmin role.
sp_send_dbmail is using a public profile in Database Mail.
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I have a DTS package in SQL Server 2000 that has a Send Mail task to shoot me an email when it completes. When I tested this manually it ran fine however when it runs as a scheduled job in the SQL Agent the Send Mail task fails.
Prior to being able to send emails I installed Outlook so I could build a MAPI profile. With the MAPI profile there I am able to create and at least manually test a Send Mail task. From experience I believe this issue arises due to the fact that when I'm logged in Outlook is running but when I'm logged out of the Server, it is not running and so the task fails.
I have to create a task, and in that task i have check exection time of package and if it more then specified time, send a mail with custom message to some specific users.
or
Can i write a event which occur after specific time and send a mail?
In my project i need to call a child package to send email to a group of users. All the configurations for sendemail task such as to, from, subject, attachment, and body are set using global variables. I pass all those variables from parent package and this is workin fine. Now my problem is the BODY MESSAGE. I need to have the body message which looks like the one below.... Status of PCCODS database on (PRODSQL6): TimeStamp on database: 10/25/2006 6:51:32 PM FACILITY OPEN/CLOSE STATUS -------------------------- -- Number of facilities open for month 10 is 80
(See attached PCCCLoseStatus excel file for details on closed facilities.) Here u need to look at Timestamp, some values like '10', '80' , 'PRODSQL6' are all passed through a different global variables. This is my problem! I already have a workin project that works fine if i pass just one line of body message. Now follows the issues 1) I cannot enter more than one line in the variable value column(if it's one line then it will work fine!!!!) 2) I need to get some values from parentpackage global variables displayed in the email. 3) I need to have a body message that looks like above one. I really doubt whether i could implement these by just passing all these in one global variable or i should have a script task, i donno..... may be someone can help me do this!!! How can i have this kindof body message implemented in SSIS? Suggestions are greatly appreciated....
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package. i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
I have got the problem connected with Send Mail Task in SSIS. The general idea was: sending email alert to different email users. I tried to use Foreach Loop task which loops through dataset (where the emails are stored) and assign different email addresses to SSIS package variable.
When I try to use this task inside Foreach Loop task I receive this error message: "Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "The parameter 'address' cannot be an empty string."
The SSIS package has variable (string) which is binded with ToLine - property of Send Mail task (it was set up in Expressions tab of Send Mail task). This ToLine property should assign different emails during every loop of Foreach Loop task.
But unfortunately is seems to be not true, because Send Mail task does not allow to assign different values to ToLine property while is in Run-Time.
Have you discovered this quite bizzare Send Mail task behaviour before ?? I appreciate every help and suggestions.
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
i am having a weird problem with the send mail task in SSIS. I have tried to different things, and i end up with two different errors:
Firstly, i have setup a data dump to excel, and the send mail taks emails this to specific email addresses.
In the Send mail task i have validated to SMTP server, and its correct.
I have manually entered all the information in the Send mail task, and i am sending to multiple email addresses. These are all seperated by a semi colan. I run the task and it fails on the send mail task with the follwoing error:
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Unable to send to all recipients.".
Task failed: Send Mail Task
I have validated all the email address and they are correct. I did some searching and someone suggested to replace the semi colan with a comma. I do this and i get the follwoing error"
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Mailbox unavailable. The server response was: 5.7.1 Unable to relay for rpwallis@bigpond.com.au".
I have checked that the IP for the SQL server is on the list of allowed relays on our exchange server. Does it make a difference if i am running this from Visual studio on my laptop?? by this, does it pick up the ip of my laptop when i test this or does it use the ip address of the server?? This would explain the relay message error if so..
Could someone please explain if i should use comma's or semi colans to seperate email addresses? and also lead me in the right direction in relatio to my problems..
I need help to fix SSIS Send Mail Task Error. I have a
Data Flow Read from Sql Data base and then put the query result into excel file (OLE DB Source --> Excel Destination)
Send Mail Task Email excel file from the data flow
Control Flow : Data Flow --> Send Mail Task
The package throws an error below. I tried to disable my antivirus because i thought it's throwing an error because of the antivirus. But, it's still throwing the same error. If i tried to send email without attachment, it works just fine. Is there anybody know how to fix this?
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
AS SET NOCOUNT ON --lokale Variablen DECLARE @String VARCHAR(1024)
BEGIN TRY
-- next line just for testing linebreak SET @mailBody = 'line one in mail ' + char(13) + char(10) + 'next line in mail' SET @String='dtexec /Ser <myServerName> /SQ DELELPLGDB01/DTS-Pakete/pkt_sendMail /Set Package ask_sendMail.Variables[Benutzer::toAddress].Value;"'+@toAddress+'" /Set Package ask_sendMail.Variables[Benutzer::subject].Value;"'+@subject+'" /Set Package ask_sendMail.Variables[Benutzer::mailBody].Value;"'+@mailBody+'"' EXEC @exitcode = master.dbo.XP_CMDSHELL @String select @exitcode as exitcode
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil To: sanderss@arsocdev.bdev.lab.mil MessageSourceType: Direct Input Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:
I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.
I am new to SQL Server 2005, I need Help to create a SSIS package for the below taks, My task is Refer a Column [Status] in the Logtable which is used to maintain the logs for the running processes, When ever any Rows with the "FAIL" status in Status column occurs in the LogTable then get the Respective ErrorRowNumber and get the Details of the Error from other 2, 3 tables which will be a simple SQL statements, when you get the Error Details then mail these details to the given Email id.
For this I need a help In creating a SSIS package which will continuously check the Status and if any FAIL status occurs then the Error details need to mail to mail id which are stored in the config files of SSIS package.
If any one has better idea to send the mails then please let me know.
if any online tutorial is available that will also help. Thanks in advance
Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
I had a DTS package on sql2000 which i migrated succesfully to Sql2005 and im able to open the package and execute the package.Now i want to add a new database mail component on this package to send emails to recepients.In short i dont want to use SQL Mail component of Sql2000 which required outlook components,instead i want to use the new features of SSIS to my package which was designed on sql2000. Is it possible to use the SSIS new features to be incorporated on my old DTS package?
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
xp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
How can I Send Mail with the query result having multiple rows. What type of dataflow destination is correct (recordset, datareader). The Send Mail task is working correctly. But, the message is blank without any result set.
1) sql connection SMTP Connection Manager 1 (windows authenditacaion/smtp both itried i was selected) 2) from/to /cc : i entered som mail ids of yahoo 3) subject : Hi koti how r u ,i am fine here
4) message source type : variable SMTPSERVER: it is just string with null value i was declare a variable ok fine then
how to use the send mail in the foreach loop example please send me
