Does anyone have a helpful link for using the partition processing data
flow task in SSIS? I am trying to process a monthly partition
from within my package and am getting the following error:
Error: 0xC113000A Errors in the high-level relational engine. Pipeline
processing can only reference a single table in the data source view.
If anyone has used this before and could point me in the right direction, I would appreciate it.
Here's my problem. I have 2 tasks defined in my Control Flow tab:
EXECUTE SQL--------->EXECUTE DTS 2000 PACKAGE
When I attempt to run it, by right-clicking the EXECUTE SQL task, and selecting "Execute Task", it only runs the EXECUTE SQL part (successfully), and does not "kick off" the EXECUTE DTS 2000 PACKAGE, after it is done running (even though it completes successfully, as shown by the green box).
Yes, they are connected by a dark green arrow, as indicated in my diagram above.
Why is this?? Am I missing something here? Need help.
I've downloaded this and installed it but i seems to fail to get this item into my data flow items list. i've read the readme.txt but i think the part where they explain the build is poorly explained. For example - Place gacutil.exe (packaged with Visual Studio) on the system path. --> wtf
Anyone can help me get this component in my visual studio working ?
I have a data flow that reads multiple rows from a table and then inserts to another table for each row. I use an ole destination for my inserts. However, after that insert I need to do other table inserts and I can't figure out how to continue the data flow with the fields in the pipeline. Out of the destination is only the Error flow - Is there a way to do this ?
What I am trying to do is move data from a staging table into a live environment and then update the staging table AFTER the row has move (and not errored). There does not seem to be a reliable method for doing this.
We have a MS-OLAP cube that has about 11 partitions and I have created a prototype package which processes these partitions conditionally based on expressions that are fed values from a SQL Server control table. It appears that one or more of the partitions seem to fail due to the fact that all of the data for the various partitions come from the same huge fact table. Is there a way to control the level of concurrency within the package itself? If not, I am thinking I should move some of the partitions to process based on other partitions completing their process successfully. Appreciate any help.
I am facing issue with partition processing. I am having a SSAS cube which is having 5 partitions. These partitions are processed through a sql server job using SSIS packages. In packages I used SSAS process task to do this.Now problem is, job is running successfully and showing that the step which is having partition process also fine.But data is not updating in the partition. While checking the partition properties, it is not updated with recent date and time.
When I try to manually process the partition, it is getting succeeded and recent data is getting reflected with recent date and time.Package configuration is done in job itself.
Using the code below, my cursor processes the last record twice. I know it has to be something simple but I haven't been able to find it yet. Please help.
select top 10 clientkey, max(id) As enrollmentkey into #temptable1 from clientenrollment group by clientkey
Declare Test_Cursor Cursor for select clientkey, enrollmentkey from #temptable1 Open Test_Cursor
I've been using Konesan's FileWatcher control-flow item successfully in design-mode on my PC, which runs the package on a remote server.
I have installed the Konesan's FileWatcher on the remote SQLServer machine. I then imported the package to the server (Files System folder). I then select the package, right-click 'Run Package', then Execute, and receive the error:
"Error: The task 'File Watcher Task' cannot run on this edition of Integration Services. It requires a higher level edition"
..in the 'Package Execution Progeress' dialog. All other validation seem to be ok.
(Note, I'm executing the above steps using SQLServer Mgt Studio from my PC ; I'm not doing it from the SQLServer machine itself...not sure if this matters or not.)
The SSIS version installed on the server is 9.0.3054. It shouldn't be an "SSIS version issue", as it is the same SQLServer that I used (successfully) from my PC in design mode...
I have a table in SQL Server with following spec Table1(Grossamount(money))
I have a SSIS variable called grosstot of type double and use following sql in Execute SQL task in SSIS
Select Sum(Grossamount) from Table1
I then assign the result of above sql stmt to the SSIS variable grosstot within the same Execute SQL task.
it gives me the error : [Execute SQL Task] Error: An error occurred while assigning a value to variable "grosstot ": "The type of the value being assigned to variable "User::grosstot " differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I tried the following sql to no avail
Select CONVERT(numeric (12,2), Sum(Grossamount) from Table1
I'm trying to copy and paste an 'Execute SQL Tasks' within one of my packages.
I've managed to solve the copy part of the problem by registering the following dlls:
regsvr32.exe msxml3.dll regsvr32.exe msxml6.dll However, I can't paste the copied task onto my control flow. When I paste I get the following error:
The designer could not paste one or more executables. Additional information: At least one executable could not be pasted correctly. the executable with the name 'Record Row Count' could not be pasted successfully. Information about the state of the executable with the name 'Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' could not be loaded from the clipboard. Exception from HRESULT: 0xC0010028 (Microsoft.DataTransformationServices.Design)
I'm currently trying to pull data from a ProvideX database and replicate it in a collection of SQL Server tables. However, I'm having a heck of a time trying to convert some strange decimals stored by the ProvideX database. As an example of the data I'm trying to retrieve, I'll see something like [. 1] or [. 1] ([]'s are to show the bounds of the field). After analyzing the data, it seems the decimal in the field represents a 1,000 placeholder. Thus [. 1] really means 1, and [. 1] really means 10. Something like .100 would be 100. 6.500 would be 6500.
As you can imagine, the spaces are causing errors when trying to pull the data, and I can't for the life of me figure out to just pull it as a string, run a script to convert it to a correct number, and then save the transformed data into SQL Server. When running the import wizard, it seems I'm being forced to pull these columns as decimals. Currently I'm trying to just pull the data out "as is" and throw it in a raw file, to be processed out of SSIS. Obviously doing it all within SSIS would be ideal, but if that can't be done, I'll do whatever it takes. I should also say I'm new to SSIS packages, but not necessarily new to SQL Server or SQL in general.
1) How can I pull these columns as strings? If I try to change the Export columns in the source query data flow step, it gives me an error saying that I can't do that.
2) If I have to pull as decimals, how can I capture the row on error, process it, and send it back to the export? So far, when I get an error, I lose all information in the row to the right of and including the error field.
I appreciate any responses, as I'm kind of going in circles at this point. If this sort of thing has been discussed here prior, I apologize...I didn't find it in any searches I did. Please just point me in the right direction if you've dealt with this sort of problem before. It seems to me that it should be an easy thing to do. I'm just not finding any tutorials on it.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
There is a table with a column that contains Xml documents. For each record from my Data Flow Source, I want to pass in the Xml document and the node to interrogate, and return the value contained in the node. Like the Crm component, this is probably one I will have to write from scratch in C#, but I would like to avoid having to create the custom component if it already exists in the public arena.
Does anyone know of any Xml Ssis Data Flow Components that are downloadable for free?
I was working all day making changes to my 3MB package. I was adding a large number of transforms that were copied-and-pasted from elsewhere in the same data flow task.
All was going well. I even took the time to have SSIS lay out the task again (1/2 hour). Suddenly I started receiving some strange errors:
After the layout, I noticed two stray components 'way off in the upper right corner. I found that one of them had a duplicate name to a component which had been added hours ago. Even after deleting it, I got "duplicate name" errors.
I copied three components in one selection, and when I tried to paste them, got the error "can't initialize component on paste". I tried them one at a time, but got the same error.
I got errors about COM failures due to marshalling to another thread I then exited Visual Studio and started it again. To my great surprise, the data flow task I was working on was still there, but was completely empty.
Comparing what I'm left with to my last version in source control, I find that the entire pipeline element is missing from the DTS: ObjectData element!
I'm developing a real love/hate relationship with SSIS. It varies from one day to the next. Guess what kind of day this is!
I am using SSIS in SQL Server 2005 and want to have a query like this in my data flow task
Select a.* from abc as a inner join (Select max(b.id) as ID from xyz as b inner join pqr as c on b.id = c.id and b.id > ?) as t1 on t1.id = a.id
SSIS fails to detect the parameter (?) for the inner query and gives message.
" Parameters cannot be extracted from the SQL command. The provider might not help to parse parameter information from the command. In that case, use the "SQL command from variable" access mode, in which the entire SQL command is stored in a variable.", so assuming this is your problem, then you can workaround.
"
The idea is to parameterize the inner query ,,, (so if the above query doesnt make sense ignore it )
I am having some problems with the loading of tab delimited text file (source) to a SQL Server table (destination) using the SSIS data flow task. Package has been executed successfully with no error msg. The number of rows in the text file also matches the number of rows in the SQL table. But, when I check the content of the table, I noticed some of the columns contain NULL which supposed to have value. This happens not to all the rows but only to some rows. I did some testing by removing some rows from the beginning, middle and end of the text file and re-run the package but the result is quite inconsistent. Sometimes, the field got filled, but sometimes, it just contains NULL where it supposed to have value.
I am experiencing an error where the ssis data flow task would freeze and stop data export from a oledb source to a text file. It doesn't generate any errors the ssis package would just hang. This only happens when I run it in 64 bit mode. When I change the mode to 32 bit the ssis never freezes and runs fine. Has anyone experience this? Is there a fix so I can run my jobs in 64 bit mode?
I have a SSIS Package which I would like to modify using SSIS API. I need to put new component between some two existing data flow's components. During this process I need to disconnect two data flow's components using SSIS API. How can I do that?
I am loading a lot of Excel and CSV files to SQL Server. Some loading may fail for various reasons. I want a file either be load as a whole or nothing. Currently I keep a list of failed filename and remove it at the end (I add a column for source file name).
Any better way to make sure a file is loaded as a whole or nothing?
I would like to know how I can add the following sample code to my Source data on Data Flow on SSIS, or what other options there are. The main issue is time as we have talking about 100's of millions of rows
select Sample, CASE WHEN Sample IS NULL THEN NULL WHEN SUBSTRING(Sample, 1, 6) IS NULL THEN ' ' ELSE RTRIM(SUBSTRING(Sample, 1, 6)) END AS [Sample_1_6] from TestTable
what I have done at this stage is just to Create a SQL task with a Insert into
INSERT INTO [dbo].[TestTable1] ([Sample] ,[Sample_1_6]) select Sample, CASE WHEN Sample IS NULL =THEN NULL WHEN SUBSTRING(Sample, 1, 6) IS NULL THEN ' ' ELSE RTRIM(SUBSTRING(Sample, 1, 6)) END AS [Sample_1_6] from TestTable
If there is a way adding this to a dataflow so I van use fast load that would really be the best solution. I know there are derived columns, but would this really be faster than the straight insert into in a SQL Task? If this is the way to go what is the code I would use in the derived column or any other option.
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5. [DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. [DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039. [My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. [DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. [DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a package that loads staging tables from an Oracle source DB. In the data flow tab I have 30+ read table/write table task combinations. When I run the package 3-4 of the read/write combos execute at a time. What I'm trying to control is the priority order of the combo execution. My goal is to minimize to total load time by having the larger table transfers run first and the smaller table transfers fill in until they are all complete. Currently, the largest table (16 million) transfers last (because it was the last combo that I created?).
I am creating a staging database in which I am loading required tables from 2 different sources. I have 30 different tables to load from source 1 and 10 different tables from source 2. This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data. So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination. I wanted to find out if this is the efficient way to do, or if there is any other way to do this. And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps as for Source 1 tables. Please advice. Thanks,
Has anyone come up/determined a generic way to capture and log indicative information within a data flow in SSIS - e.g., a number of rows selected from the source, transformed, rejected, loaded, various timestamps around these events, etc.? I am trying to avoid having to build a custom solution for each of the packages that I will have (of which there will be dozens). Ideally, I'd like to have some sort of a generic component (such as a custom transformation) that will hide the implementation details and provide a generic interface to the package.
It is not too difficult to achieve something similar on the control flow level, but once you get into data flows things get complicated.
I'm creating a SSIS in the designer view of SQL Server BI Dev. Studio (SQL Server 2005)
I need to import a whole table from MS Access into my local SQL Server.(this task will be performed weekly, so once working I'll schedule a job for it)
I've created a 'FILE' connection to MS Access in the 'Connection Managers'.
When I'm on the 'Data Flow' tab I can't find a Data Flow Item to use as a MS Access connection. (available on the 'Data Flow Sources' are only: DataReader, Excel, Flat File, OLE DB, Raw File and XML Sources)
I am using the "SSIS Log Provider for SQL Server" to log events to a table for "OnError" and "OnPostExecute" events of a package. This works as expected and provides a nice clean output on the execution steps of the package.
I am curious as to why I do not see any detail for any/all tasks that fall under the "Data Flow" section of the package though. For instance, on my "Control Flow" tab, I added a "Data Flow" task that simply loads a few tables from a target to destination server. However, there is nothing shown in the logging output. Just that a Data Flow task was initiated. And when I'm configuring this logging under "SSIS-->Logging" in the checkbox area on the left, you cannot "drill into" data flow steps.
Is there a reason why there is no detailed logging for Data Flow tasks? Would getting to that require me to create a custom log provider?
