I am trying to do the following for a few tables in my DB. I have an ODBC datasource and would simply like to update my DB from this datasource. I want to pull the table data from my ODBC datasource, delete any existing data in my SQL tables and then insert the data from my ODBC datasource into SQL. I am trying to create an SSIS package to do this but am not sure where to start. Any help or examples would be appreciated.
View 6 RepliesI've got four pages with in the first page a insert, in the second a select, in the thirth a update and in the fourth a delete statement. First the values of a textbox will be inserted in the database, then the values will be shown in labels and than it is possible to edit or delete the values inserted. Every inserted item belonging to each other has one ID. The follwing values has a second ID etc.
How can I make that possible?? I think that I should pass the ID's between the pages so I'm sure that I edit or delete the values that I want. So insert value 1 in page 1, show with select value 1 in page 2, edit or delete value 1 in page 3 and 4.
Maybe I didn't explain it good enough for you, please tell me then!!
Thanks!!
hi
i have form view that retrieves a single row
i dont want to use SQLDataSource default Select/Update/Insert/Delete buttons
i am using Stored Procedures
I want to have my own buttons, the select has parameters, how to retrieve data for that parameter?
I am using a sql server 2000 database to log the results from a monitorthat I have running - essentially every minuite, the table describedbelow has a insert and delete statements similar to the ones below runagaint it.Everything is fine for a few weeks, and then without fail, all accessesto the table start slowing down, to the point where even trying toselect all rows starts timing out.At that point, the only way to make things right that I have found, isto delete the table and recreate it.Am I doing something specific that sql server really doesn't like? Isthere a better solution then deleting and recreating the table?CREATE TABLE [www2] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[stamp] [datetime] NULL CONSTRAINT [DF_www2_stamp] DEFAULT (getdate()),[success] [bit] NULL ,[report] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[level] [int] NULL ,[iistrace] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOINSERT INTO [www2] ([Report],[Success],[Level],[iistrace],[Stamp])VALUES ('Error on: <ahref="http://www2.klickit.com/include/asp/system_test.asp">http://www2.klickit.com/include/asp/system_test.asp</a><br><br>The operation timedout<br><br>(Test Activated From: Lynx/2.8.2rel.1libwww-FM/2.14)',0,1,'',getDate())DELETE FROM [www2] WHERE (Stamp<getDate()-3) AND (Success=1) AND (ReportNot Like 'ResetThanks in advance,Simon Withers*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI am still learning SSIS.
What is the best way to do delete/insert/update in a database in SSIS. I am looking to achieve something similar to what was there in a Data Driven Query in SQL Server 2000. I would like to delete/insert/update the destination table based on the condition that my lookuptable returns
For ex
If "the user in my source table has changed the status" Then
Update the user row in the destination table
Else skip the row
If "the user in my source table has delete flag =1 " Then
Delete the user in the destination table
Else skip the row
If "the user in my source table is new(has a new ID) " Then
Insert the user in the destination table
Else skip the row
Any suggestions ....
Cheers
Siaj
Greetings. I have been trying to develop an SSIS package that updates external data (Visual FoxPro tables) from SQL Server 2005. I have tried this various ways: using various Data Flow task components that flow to an OLEB Destination; using an Execute T-SQL Task; and even trying Management Studio interactively with the OpenDataSource('vfpoledb', etc.) statement. For each of these techniques, I have no problem performing a SELECT from the VFP data. Also, I have no problems performing an INSERT of new records using any of these techniques. However, both UPDATE and DELETE of existing records fail.
Is it possible the the OLE DB driver doesn't support UPDATE and DELETE operations? It appears that I'm not allowed to change or delete existing records, only add new ones. Or, are there other techniques I can be trying?
I am aware that updating FoxPro data can be performed by pulling the data from SQL Server into FoxPro. For our purposes, it would be more convenient if the processes could be initiated and managed from the SQL Server side of things instead.
Thanks much,
Randy Witt
Hi All,
As known its recommended to use stored procedures when executing on database for perfermance issue. I am thinking to create 4 stored procedures on my database (spSelectQuery, spInsertQuery, spUpdateQuery, spDeleteQuery)
that accept any query and execute it and return the result, rather than having a number of stored procedures for all tables? create PROCEDURE spSelectQuery
(
@select_query nvarchar(500)
)
as
begin
exec sp_executesql @select_query, N'@col_val varchar(50) out', @col_val out
end
Is this a good approach design, or its bad???
Thanks all
I want only last yesterday data that's why i put the condition at oledb source and it working fine.It fetch previous day of data but at the time of lookup , it lookup all data from the beginning and provide the error of insufficient space.
1.how lookup contain only yesterday data.
2.What to do for lookup all data (adding space is the solution or something else to do)
3.I want to transfer 100 of tables data everyday. this article is only for transferring one table data.For transferring the data of another table add dataflow task below to Apply stages update or add another sequence container.
Hello, I recently view a webcast of sql injection, and at this moment I created a user, and give dbo to this user, and this same user, is the one I have in the connection string of my web application, I want to create a user to prevent sql injection attacks, I mean that user wont be able to drop or create objects, only select views, tables, exec insert,update, deletes and exec stored procedures.
Is any easy way to do this?
A database role and then assing that role to the user?
Is there a way in SQL server that can generate stored procedures for select, insert, update, delete on certain tables?
View 4 Replies View RelatedI have a ssis package which identifies duplicate records in access database. I have staged access database into sql sever and created ssis package. Now, I have final list of records which needs to be delete from access database and new records which are to be inserted into access database.
What do I need to do if I want to delete those duplicate records directly from access database using SSIS. I cannot truncate whole access database and reload. I just have to delete duplicate rows from access db and add new records.
Far below (in section "original 3 steps"), you see the following:1. a temp table is created2. some data is inserted into this table3. some of the inserted data is removed based on a join with the sametable that the original select was made fromIn my opinion, there is no way that the join could produce more rowsthan were originally retrieved from viewD. Hence, we could get rid ofthe DELETE step by simply changing the query to be:INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )AND INMESS NOT LIKE '2__' ---- the added line===== original 3 steps (mentioned above) =====CREATE TABLE #details (rec_id UNIQUEIDENTIFIER PRIMARY KEY NOT NULL,orig VARCHAR(35) NULL,bene VARCHAR(35) NULL,orig_corr TINYINT NULL,bene_corr TINYINT NULL)INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )DELETE dFROM #details dJOIN viewD v ON ( d.rec_id = v.rec_id )WHERE INMESS LIKE '2__'
View 1 Replies View RelatedUsing OrderRebate Table.
Have two records getting inserted. All fields are identical except for cd_tp.
If 2 records are inserted I would like the record with cd_tp 3 deleted.
Code below doesn't seem to be working
delete orderrebate
FROM OrderRebate inner join inserted on inserted.ord_type = OrderRebate.ord_type and
inserted.ord_no = OrderRebate.ord_no and inserted.line_seq_no = OrderRebate.line_seq_no
where inserted.ord_type = OrderRebate.ord_type and inserted.ord_no = OrderRebate.ord_no
and inserted.line_seq_no = OrderRebate.line_seq_no and inserted.cd_tp = '3'
END
Here's my sp. Before I insert my new values I want to delete the existing records from the table. Can I do this in the same sp ? If so, could someone tell me the syntax please.
CREATE PROCEDURE [spRB_AddBlockBookingDateRef]
** here Delete * from tblRB_BlockBookingDates
@strBookingDateRef nvarchar(100),
@strRoomRef nvarchar (50),
@strDateRequired datetime
AS
INSERT INTO tblRB_BlockBookingDates(
BB_BookingDateRef,
BB_RoomRef,
BB_DateRequired)
VALUES
(@strBookingDateRef,
@strRoomRef,
@strdateRequired
)
GO
Hi All,
I have this project I'm working on it's Product Content Management System rewrite. I got to the point of updating the Product By Sku and not sure if I should use UPDATE statement or I should DELETE sections assosiated with the ProductContentID and then re-insert them again? I'm not sure which is more afficient?
I can really do both and it's really not that complicated, the only problem I see with DELETE then INSERT is the ProductContentSectionId in the Sections table is going to grow very fast and I'm a bit concerned about it.
We use SQL Server 2000 and we have about 4 bound tables where we keep the data. The one I'm talking about is the sections table where we keep the actual types of product content like a BoxShot, Description, Key Features and so on...
Thank you in advance!
Tatyana Hughes
hi all
iwant to make feedback after insert data or delet date Like( the data is sucssfuly way) or(data is delete sucssuse way)
but not alert iwant feedback
thank you
hello all i have a problem in deleting and updating records when i configuring my data source i click on advanced button in the configuration datasource and then i check the two boxes to generate insert and update and optimistic concurrency but the problem is these two choices are not active unless there was a primary key in the table i have some tables doesnt have a primary key how i can fix that what should i do to allow insert and delete in these tables.thanks in advance
View 4 Replies View RelatedI am trying to update a SQL database with data from a Wang system. The Wang data is dumped to a txt file. I then import it into an update table in SQL via Access. Some of the data is new and some of the data is updated records. At this point I have been trying to create a script to update and add data to a table via the query tool in SQL Then delete data from the update table.
I was able to get the UPDATE and DELETE to work but I have not figured out how to insert new records at the same time? Can I use an IF statement? I will apreciate any help or sample code, Thanks.
UPDATE MemberList
Set Name = NameUpd, Address1 = Address1Upd, Address2 = Address2Upd, City = CityUpd, State = StateUpd, ZipCode = ZipCodeUpd, MemberStatus = MemberstatusUpd
FROM MemberList, MemberListUpd
WHERE MemberList.MemberNumber = MemberListUpd.MemberNumberUpd
INSERT ?
DELETE MemberListUpd
i am creating an insert based on a select statement -- i need to delete the row from the select statment table after it has been inserted
something like
insert into table_insert(value1, value2)
(select table_exclude_id, value1, value2 from table exclude)
delete from table_exclude where table_exclude_id in "the select statement"
can you do this?
Im trying to keep a mirror image of some data Im getting from Quickbooks.
As the records are inserted into the database I need to check if a record exists and either update or insert a new one.
it seems easier just to delete using the tnxid and reinsert vs updating
my question is if I go
begin
INSERT INTO QBInvoicesQue(100s of feilds)
end
begin
delete from QBInvoices where txnid = @TxnID
end
and there is not matching txnid to delete from will it cause any problems? before going to the insert statement?
begin
INSERT INTO QBInvoices(100s of feilds)
end
I like to empty my table before I insert a xml. How can this be done in SSIS?
I vaguely recall reading an article that I can no longer find that an update statement is executed as a combination of a Delete and an Insert by SQL server. Does anyone know if this a still a true statement in SQL Server 2005?
Thanks,
-shl
I want to do insert and delete in a cursour but it's not working for me can any one check the below code and help me out to solve the problem,
DECLARE @LINKID AS INT
DECLARE @INITCOUNT AS INT
DECLARE @NumberOfDuplicates AS INT
SELECT @InitCount = (SELECT COUNT(*) FROM [SSDTemp])
Declare DedupeDataInSSDTempTableNewCur Cursor For
SELECT LINKID FROM SSD WHERE LINKID IS NOT NULL
OPEN DedupeDataInSSDTempTableNewCur
FETCH NEXT FROM DedupeDataInSSDTempTableNewCur
into @LINKID
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE @CNT AS INT
SELECT @CNT = COUNT(LINKID) FROM SSD WHERE LINKID=@LINKID
if (@cnt =1) begin
INSERT INTO SSD (
[CallID],
[LinkID], [FirstName], [MiddleInit], [LastName],
[Suffix], [DateOfBirth], [SSN], [PhoneNumber],
[Addr1], [Addr2], [City], [State], [Zip] )
SELECT top 1
[CallID], [LinkID], [FirstName], [MiddleInit],
[LastName], [Suffix], [DateOfBirth], [SSN],
[PhoneNumber], [Addr1], [Addr2], [City], [State], [Zip] from SSDTemp
where linkid = @LINKID
DELETE top 1 from ssdtemp where linkid=@LINKID
end
if (@cnt =0) begin
INSERT INTO SSD (
[CallID],
[LinkID], [FirstName], [MiddleInit], [LastName],
[Suffix], [DateOfBirth], [SSN], [PhoneNumber],
[Addr1], [Addr2], [City], [State], [Zip] )
SELECT top 2
[CallID], [LinkID], [FirstName], [MiddleInit],
[LastName], [Suffix], [DateOfBirth], [SSN],
[PhoneNumber], [Addr1], [Addr2], [City], [State], [Zip] from SSDTemp
where linkid = @LINKID
DELETE top 2 from ssdtemp where linkid=@LINKID of DedupeDataInSSDTempTableNewCur
End
SELECT @NumberOfDuplicates = @InitCount - (SELECT COUNT(*) FROM [SSDTemp])
FETCH NEXT FROM DedupeDataInSSDTempTableNewCur
INTO @LINKID
END
CLOSE DedupeDataInSSDTempTableNewCur
DEALLOCATE DedupeDataInSSDTempTableNewCur
I have a script that delete records daily and shrinks the log file. I tested it with the SQL Analyzer and I should get the same results? I put this in a job that runs at night and when checking today when I got in the jobs ran successfully but the datafile continued to grow along with the transaction log. Here is the script:
Use wslogdb62
go
delete * FROM dbo.INCOMING_temp
WHERE DATE_TIME <=dateadd(day, -180, getdate())
DBCC SHRINKFILE(wslogdb62_log, 1)
as you know I get a error from the analyzer.
for now, doing a small school project, i find doing SPs for Insert useful, like checking for existing data and not inserting, that might not be the best method, i had advice from here i can use unique constraints instead, then what about update and delete? SPs also? the pros make SPs for everything? currently use dynamically generated SQL from SqlDataSources. for Update / delete. some delete are SPs too...
View 2 Replies View RelatedI have recently started an ASP.Net application and am having some issues updating, inserting and deleting rows. When I started working with it, I was getting errors because it could not find any update command. Eventually, I figured out how to automatically generate the commands, by configuring my SQLDataSource control and clicking the "advanced" button. Right now though, I have generated the commands, but I still can not insert, update or delete rows. When I attempt to update anything, I recieve an error that says "The data types text and nvarchar are incompatible in the equal to operator." Nowhere in my table do I have any rows that use the datatype "nvarchar", only "text" and "int". I tried switching all of my text columns to "nvarchar(500)", which did not help. I am led to believe that the auto generated SQL procedures are trying to do something behind the scenes that is making my database act up, because even when I delete rows, I get the same exception, so the datatypes cannot be messed up there, because all that the datasource is doing is deleting rows, therefore there is no need to worry about data types. I only get the error when I check the "Use optimistic concurrency" box. When I do not use optimistic concurrency, I can delete, insert, and update rows... but nothing happens. There are no errors, but nothing is deleted, updated or inserted either. Upon postback, nothing has changed. I may upload a copy of the exact exception page, if someone thinks that it may help. Here is the update command that was generated: UPDATE [Record Information] SET [Speed] = @Speed, [Recording Company] = @Recording_Company, [Year] = @Year, [Artist] = @Artist, [Side 1 Track Title] = @Side_1_Track_Title, [Side 1 Track Duration] = @Side_1_Track_Duration, [Side 2 Track Title] = @Side_2_Track_Title, [Side 2 Track Duration] = @Side_2_Track_Duration, [Sleeve Description] = @Sleeve_Description WHERE [Record Database ID] = @original_Record_Database_ID
Apparently no stored procedures exist for any of these operations, and I am unsure why. The "Record Database ID" is my identity column, and is the only field that is (and is supposed to be) uneditable.
Hi,
i want to create a sqldatasource in VWD also with advanced (insert, delete, update) option.
This works fine for 'normal' tables, but when i try to do that with e.g. aspnet_roles table (indicated as vw_aspnet_Roles in dropdownlist of VWD), or aspnet_users table, that advanced option is not available, even when i select all fields.
Why, and how can i solve that?
Thanks
Tartuffe
Hi,I just upgraded my ASP.NET 2.0 BETA 2 environment to the final release of ASP.NET 2.0 VWD.Once the update was finished, I could open my website without any problems..... Now, I noticed that in the final release, some modifications have been included in the Membership Stored Procedure and other stored procedures. So I created a new database (SQL Express) and added my data again.After re-creating my SQLDataSources, I tryed to enable the Editing and Deleting option in VWD and once I run my web application, it seems when selecting editing and then update, it doesn't work anymore....This is my code :
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:IMMOASPNETDBConnectionString %>"
DeleteCommand="DELETE FROM aspnet_test WHERE (testID = @Original_testID)" SelectCommand="SELECT BuyID, BuyNL, BuyFR, Lastupdated FROM aspnet_Buy"
UpdateCommand="UPDATE aspnet_Buy SET BuyNL = @BuyNL, BuyFR = @BuyFR WHERE (BuyNL = @original_BuyID)">
<DeleteParameters>
<asp:Parameter Name="Original_testID" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="BuyNL" />
<asp:Parameter Name="BuyFR" />
<asp:Parameter Name="original_BuyID" />
</UpdateParameters>
</asp:SqlDataSource>
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AutoGenerateColumns="False"
DataKeyNames="BuyID" DataSourceID="SqlDataSource1">
<Columns>
<asp:CommandField ShowEditButton="True" />
<asp:BoundField DataField="BuyID" HeaderText="BuyID" InsertVisible="False" ReadOnly="True"
SortExpression="BuyID" />
<asp:BoundField DataField="BuyNL" HeaderText="BuyNL" SortExpression="BuyNL" />
<asp:BoundField DataField="BuyFR" HeaderText="BuyFR" SortExpression="BuyFR" />
<asp:BoundField DataField="Lastupdated" HeaderText="Lastupdated" SortExpression="Lastupdated" />
</Columns>
</asp:GridView>Can someone help me with this ? What is wrong with the Update command ?Thanks to all,Bart
Hello Guys,
I’m trying to create a sqlDataSource using the wizard, I can get the select statement, the here clause and the order by clause but when I click on the Advanced button the options to generate the insert, update and delete statements are not available. Does anyone know what am I doing wrong?
When granting INSERT, DELETE permissions, is this done for
the logon-id OR for the user associated with the logon-id?
I know you can do this for roles.
I HAVE TWO TABLES IN THE DATABSE AND THE SECOND TALE SI FOR AUDITING.
I WANT CREATE THE TRIGGER ON FIRST TABLE SO THAT I CAN PUT THE STATUS
LIKE INSERT,UPDATE OR DELETE IN THE STATUS COLUMN IN SECOND TABLE.
CAN SOMEBODY HELP IN WRITING THAT TRIGGER..?
HOW CAN I DETERMINE WAETHER THE RECORD IS BEEN INSERTED OR UPDATED OR DELETED.
DO I HAVE TO WRITE A SEPERATE TRIGGER FOR EACH ACTIVITY..OR I CAN WRITE IT IN THE
SINGLE TRIGGER..?
PLEASE SUGGEST ME..ITS URGENT.
THANKS IN ADVANCE
HARISH
Hello,
What is faster / better for performance?
Check if something already excist and update the changed values? or delete the whole table and then insert everything?
Thanks!
I am having problems with a trigger that is designed to audit changes to a particular field in a table. If that field is updated, then the old record is inserted into an audit table.
This trigger never fails when I run test data against it from Query Analyzer. It works some of the time when the web application updates it, fails other times.
Typically, multiple records are updated at the same time. Any ideas?
Here is the Trigger:
create trigger t_u_product_rate_detail
on product_rate_detail
for insert, update, delete
as
/--Local variable
declare
@auditdate datetime,
@audituser sysname
--Set values so function isn't executed a bunch of times
select
@auditdate = getdate(),
@audituser = suser_sname()
if exists (select * from inserted)
begin
if exists (select * from deleted)
begin
insert into product_rate_detail_audit_log
select d.product_rate_detail_id,
d.product_rate_id,
d.day_of_week_id,
d.ad_size_id,
d.rate,
d.plan_vol,
d.plan_freq,
@auditdate, @audituser, 'U'
from deleted d
join inserted i on i.product_rate_detail_id = d.product_Rate_detail_id
where (d.rate <> 0 and d.rate is not null)
and i.rate <> d.rate -- this determines if the rate has changed.
end
end
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO