SSIS SQL Server Agent Job Task

May 18, 2007

Hello,



I try to create a SSIS package only use SQL server agent job tasks(some in 2000 and some in 2005) in control flow. Basically if the first secheduled job failed the package will stop. I linked the first and the second job with 'on success' precedence constraint. But when I build or run the package it always return execution success and run the second one. And I know for sure the first job is failed through enterprise manager - management - jobs



Could somebody advice what could possibly went wrong?

Thanks.



Flora

View 7 Replies


ADVERTISEMENT

FTP Task Fails - SSIS Scheduled With SQL SERVER AGENT As JOB

Nov 21, 2006

Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.

Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?

I am quite sure as it is something with FTP connection string or security, but can't figure it out.

I have simply added the IP/login/password in the connection manager for upload task.

Any help/ guidance would be great.

Thanks,
Ad

View 4 Replies View Related

Sql Server Agent SSIS Task Does Not Run Interactive Desktop Applicataion

Jun 23, 2006

I created a SQL Server Agent job that contains an SSIS task. This task runs succesfully from BIDS. From the SQL Server Agent job it never completes while trying to run the SSIS task that needs to open an WS_FTP command line window to run an sftp step and then close.

I had this working on my local machine, Windows XP SP2, using the SSIS service using the local system account with "Allow Service to Interact with Desktop" checked. I needed to check this option for it to work. Otherwise the routine just hung without completing or an error message.

On our test machine running Windows 2003 with SP1 the SQL Server Agent and SSIS services are set to run under the NT Authority/NetworkServices account. I set the permissions on this account based from the list shown at SQL Server 2005 Books Online, Selecting an Account for the SQL Server Agent Service ,http://msdn2.microsoft.com/en-us/library/ms191543.aspx. I also needed to set folder permission on this account to access the files I wanted to ftp.

What I don't know what to do and that I suspect might be the problem is how to set the equivalent of, "Allow Service to Interact with Desktop" for this account. This was only an option under the local system account.

I would appreciate any ideas and guidance on how to deal with this case. Thanks.

View 4 Replies View Related

Running A Ssis Package In Sql Server Agent With Execute Process Task

Apr 1, 2008

Hello

I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).

Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.

There are no errors in any error logs anywhere and no error is displayed...

Ps. Im running the job step as a integration service pacgake.

View 8 Replies View Related

Execute Sql Server Agent Job Task - Job Immediately Returns Success... However Agent Job Is Still Running???

Nov 30, 2006

when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds



However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.



Thanks,

Larry

View 1 Replies View Related

SSIS - Process Task Exit Code 4 - Via SQL Agent Scheduled Job Only - Works If Manually Started....

Oct 10, 2007

We have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks

Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.

View 11 Replies View Related

SSIS Task Transfer SQL Server Objects Task And Default Constraints On Tables

Feb 21, 2008



I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.

The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.

I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)

Any option anyone knows will help.

Thanks.

View 17 Replies View Related

Can't Run Integration Services Package As A Sql Server Agent Task

Aug 21, 2007

Hi guys, I 've been trying to run an integration services package as server agent scheduled task so that I dont have to manually execute the package every 2 hours. I was following how to guide in msdn to set up a server agant task for integration services package but I'm kind a lost. First of all when I ran the Management Studio and connected to the integration services the server agent does not show up it only shows me runing and stored packages. I can access to the server agent when I connect to the database engine but when I create a task and try to add a step to open a integration services package it does not give me the choice in type box. I couldn't figure out the problem. Is there a way to enable server agent to run under integration services too (not just under database engine) if databse engine is the only place server agents works , why dont I see the option to open a ssis package at adding a step to tasks? or is there a way to automate the process to run the package automatically without using the server agent at all?

Thanks,
Burak

PS I was following the http://msdn2.microsoft.com/en-us/library/ms139805.aspx article

View 6 Replies View Related

SSIS (Integration Services) Transfer SQL Server Objects Task: This Task Can Not Participate In A Transaction

Feb 1, 2007

In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?

In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.

I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.

Here€™s the error info€¦

SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).

View 9 Replies View Related

FTP Task In A SQL Server Agent Scheduled Job - Corrupts Excel File?

May 8, 2006

We are not certain if this has happened due to the SSIS FTP Task, but incidently the Excel file that is being copied from the FTP site using an SSIS FTP Task got corrupted a couple hours after the package was scheduled as a SQL Server Agent Job on SQL Server 2005.

I had a SQL Server 2000 DTS package doing the same thing, but it was never an issue then. I was using the FTP Task there along with an Excel Data source in that and has been working for a couple years atleast with never any corruption related issues.

In the SSIS SQL Server 2005 package I am using an FTP Task with an Excel Connection Manager and Excel source and the Excel file got corrupted within a couple hours of the package being scheduled as a SQL Server Agent job.

Has anyone experienced this issue? Any inputs will be appreciated.

Just as an fyi, the excel file has a lot of vlookups.

Thanks,

MShah

View 1 Replies View Related

The SSIS Package Does Not Run Using SQL Server Agent Job

Apr 10, 2007

Dear All,


I'm using SSIS package to extract text file, and load into SQL Server. I test the SSIS package import manually, it works. Then I'm using SQL Server Agent to set up schedule. According to the log, the job agent work at the scheduled time, yet job agent throw out the error message.

Message1:
The job failed. The Job was invoked by User sysAdmin. The last step to run was step 1 (Extract Data).

Message2:
Executed as user: SQLSERVERsysAdmin. The package could not be loaded. The step failed.

Now I only have 1 step and set up "on success action" then "quite the reporting success". Any clue? Thanks


will

View 11 Replies View Related

SSIS Package - SQL Server Agent

Apr 9, 2007

Hi Everyone:

I would like to find out, if there is something I can implement/or should I need to implement to avoid running two concurrent processes of 1 SSIS Package. I mean by default, I will schedule the SSIS package to run utilizing SQL Server Agent. But How I avoid/prevent it to run concurrently or what do I need to setup where I only allow 1 instance of my package to run. Thanks.



View 10 Replies View Related

The SSIS Package Does Not Run Using SQL Server Agent Job

Apr 5, 2007

Dear All,





My SSIS package is "Extract" data from Oracle and Load into SQL Server.

The SSIS package does not run when I call the SSIS package from a SQL Server Agent job step

I have gone through all the steps in the doc http://support.microsoft.com/kb/918760, but it still doesn't work.


Is it because of connection to "Oracle" database? and SQL Server Agent service could not recognise the Authentication information to Oracle?

Why I am saying this is becuase it works if I change the package to "Extract" data only from SQL Server.

Anyone has experience on this problem?

Many Thanks in Advance



John

View 11 Replies View Related

SSIS Execution Failed By SQL Server Agent

May 28, 2007

I have various ssis packages which need to schadule through SQL server agent, I manage to schadule those packages but every time SQL server agent execute those packages automaticlly they failed ... I went to package log and it gives error that Step one failed, on the other hand if i execute those packages through "Execute Package Utility", they run without any error ...

Please Help...

View 4 Replies View Related

No Permissions To Run SSIS Package From SQL Server Agent?

Sep 6, 2007

I've been looking everywhere for a hint on how to tackle this, but can't get it to work.

I have an SSIS package that I am trying to run from SQL Server Agent.

I have been able to run it fine from the IDE, and from within the Integration Services system on my database server. However when I try to run the package via SQL Server Agent I get the following error:
"Executed as user: MyDomainSQLServer. The package execution failed. The step failed."

The login name is the SQL Server service account, which is a domain account on our domain. The package is set with EncryptSensitiveWithPassword and the password is supplied on the command line via the /DECRYPT flag.

I am thinking that maybe there is a permissions problem with the service account, but I can't find any detailed information about what actual permissions this account requires. I have tried expanding its permissions, but continue to get this error.

How should the MyDomainSQLServer account be configured?

View 4 Replies View Related

SSIS Package Works, But Not In SQL Server Agent Job

Feb 1, 2007

I have a problem running an SSIS package in a SQL Server job. The package runs fine if I run it from the MSDB location, but if I try to run the job it fails. The job is set to Run as: SQL Agent Service Account. The SQL Service Agent service runs as a domain user SQLExec. I have logged in as this user and run the SSIS package and it runs fine, but if I create a job with only this step it fails. There isn't much information about where there is a problem. Any ideas or ways to troubleshoot this problem would be very much appreciated.

Thanks, john

View 3 Replies View Related

Execute SSIS Package Using SQl Server Agent

May 29, 2007

Hi

I hv created a new Job for my SSIS Package... but when i start the job manually it gives me this error below:

"Executed as User:localhost/SYSTEM. THe package could not be loaded.the Step Failed".

i have my package deployed in Storage Packages[MSDB]...

Could you help me on this....

THanks!

Karthik

View 1 Replies View Related

Calling SQL Server Agent JOB From A SSIS Package

Feb 9, 2007

Hello

do ne one know how to call a SQL SERVER agent job from a SSIS package?

regards,

Anas

View 1 Replies View Related

SSIS Package Failed To Run In SQL Server Agent

May 13, 2008



I created a SSIS package using VS2005 with the "ProtectionLevel" set to "DontSaveSensitive" . I executed the package and it completed without an error. I then built the package and deployed it to the SSIS inside the folder "MSDB". I run the pakage in SSIS and it worked perfectly. Then I created a job in SQL Server Agent and have it run in a per-set schedule. It failed to run withthe following error:

Message
Executed as user: SRVSOUDB01SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:11:02 PM Error: 2008-05-12 22:11:03.17 Code: 0xC001401E Source: STDM Connection manager "Target_AS_STDM.abf" Description: The file name "\Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf" specified in the connection was not valid. End Error Error: 2008-05-12 22:11:03.17 Code: 0xC001401D Source: STDM Description: Connection "Target_AS_STDM.abf" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:11:02 PM Finished: 10:11:03 PM Elapsed: 0.422 seconds. The package execution failed. The step failed.

The error mentioned the step in SSIS Package that requires to copy the backup of the OLAP database file "AS_STDM.abf" from the Source Server location (local processing server SRVSPOYDB01) to the Targer Server location (remote production server SVMPPODB01) "Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf". This step worked in the SSIS(SRVSOUDB01) when executing there. Why it is not working in Sql Server Agent(SRVSOUDB01). It also works in VS 2005.

Thanks.

View 3 Replies View Related

Problems Running SSIS Job From SQL Server Agent

May 6, 2008


Hi, I was wondering if anybody would be able to help me and realise by looking round that is a reasonably common problem, but it€™s starting to drive me mad now!!

I€™ve got an SSIS package which takes data from an excel spreadsheet and using a stored procedure updates a table in a database, before moving the spreadsheet to another folder once it finishes. This works fine when in the Business Intelligence Design Studio, but when I try to set it up to run from the SQL Server Agent I get nothing but problems. I€™ve had a look around various forums and seen that many people have had this problem and I€™ve followed advice that other people have given, but try as I might nothing will work for me.

Currently I€™m trying to go down the package configurations route. I€™ve enabled the use of package configurations in the development studio and specified the configuration to pick up the destinations, usernames and passwords of everything that I have in the Connection Managers. I then go to the SQL agent and as a step tell it to execute the SSIS package using the package configuration xml file that it has created. Both the SSIS package and the package configuration file are saved and been asked to run from the sql server I will be using. I then go to run the package and it thinks about it for a minute or so before falling over. The history then says the below:

Message
Executed as user: UKWACALORsql2k5svc. ....00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:35:31 Progress: 2008-05-06 11:36:32.10 Source: Data Flow Task 1 Validating: 0% complete End Progress Error: 2008-05-06 11:36:32.15 Code: 0xC0202009 Source: WiReCAPSLoad1 Connection manager "DestinationConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.". End Error Error: 2008-05-06 11:36:32.15 Code: 0xC020801C Source: Data Flow Task 1 Destination - cstCAPSLoad1 [32] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionOLEDB" failed with error code 0xC0202009. ... The package execution fa... The step failed.

The DestinationConnectionOLEDB is pointing at a database on the same server as where I have the SSIS package and configuration file stored. I€™ve gone into the xml file and noticed that the passwords aren€™t saved so I€™ve added the passwords manually into the file after everytime it says username=sa but this hasn€™t made a difference. I€™ve also made sure that the package is saved to dontsaveencrypted.

I€™ve gone through the following article:

http://support.microsoft.com/kb/918760

and tried to use things such as credentials but these haven€™t helped either.

I€™m really not sure why its giving me such hassle, I have the SSIS package on the sql server, I have its package configuration on the same server, I have the databases it wants to access on the same server, I€™m using the sa account wherever I can to make sure I have no access / rights issues, so I really have no idea why this won€™t work. All I can think of is that the sql2k5svc account that the sql agent job then runs under doesn€™t have authority to get to the database or the package configuration file, but I€™ve added that account to have full control on the database that it will accessing, but again no joy. How do I change it so that another account can be used to run this, one that I know has all the authority required to access everything it should?? And why would the login for sa be failing when it€™s the highest level account??

I€™ve read so many different articles on this problem and tried to follow so many different resolutions that I really don€™t know how any of this is meant to work anymore!!

Any help would be gratefully received!!

Thanks

Brad

View 16 Replies View Related

SSIS Package Vs SQL Server Agent Jobs

Mar 12, 2007

Hello All,
My database application has certain stored procedures which are scheduled to run at certain predefined interval (say once everyday). Now to implement this logic I have two options with me, first being to use the EXECUTE SQL TASK of the SSIS package and schedule it using the windows scheduler and the other is to use the SQL Server Agent Jobs and schedule it there itself. Now the current implementation is using the SSIS packages and I even know that the second approach of using the SQL Server Agents Job is better.
The only thing I want to know is whether it makes sense to invest time in converting my SSIS packages (20 in all) to SQL Server Agent jobs or not. Can somebody briefly explain or give some pointers regarding the performance benefits of Agent Jobs over the SSIS packages.

Thanks in Advance
Mitesh

View 5 Replies View Related

Ssis Package Can't Connect To Pop Server Over The Internet From Sql Server Agent

Dec 20, 2007

Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere

View 3 Replies View Related

Problem Running SSIS Package In SQL Server Agent

Mar 3, 2008

Hi

I have setup a step in SQL Server Agent to run a SSIS package that I have created. However the step fails straight away and refers me to the history log, which doesnt seem to show what the problem is.

I've tried running the package manually through dtexec.exe and it runs through fine. Does anyone know what the problem could be?

Thanks

View 9 Replies View Related

SQL Server Agent Fails SSIS Package Execution At The End.

Oct 1, 2007

I have an SSIS ETL Package that runs perfectly in debugger.

It is saved to the local SQL Server using "rely on server security".

The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.

The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.

I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.

Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!

View 2 Replies View Related

Scheduled SQL Server Agent SSIS Package Job Problem

May 9, 2006

HELP! I have been banging my head against a brick wall on this one all this morning AAAAAAGGGHHH!

1. I have an SSIS package that runs a simple SQL script and then updates a few tables by downloading some XML of the web. It runs fine when I kick it off manually under SSMS.

2. I created a SQL Server Agent job to run it every day. This always fails. The error information in the log is useless ("Executed as user: domainuser. The package execution failed. The step failed." - I had already figured that out!). It fails almost straight away, and when I enable logging for the SSIS package, no info is ever logged (text file, windows event log, whatever).

3. Out of desperation I have changed Agent to run under the same domain user account that I created the package with. No use.

My questions:

1. How can I get more detailed logging from SQL Server Agent?

2 Any ideas about why it's failing in the first place.

Many thanks in advance.

Ben

View 17 Replies View Related

Executing SSIS Package Through SQL Server Agent Fails

Nov 28, 2007

Hello,

I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.

The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."

P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential

The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"


I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.

P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.

How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?

Thanks for help.

Lilia

View 18 Replies View Related

Scheduling SSIS Package From SQL Server Agent Job Fails.

Feb 21, 2008



HI,

I am having a strange error coming in SQL server 2005.

I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.

Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:

Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.

Not sure why is this happening.

Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.

Please help me out how to rectify whith this.

Thanks.. in advance

Regards,
Ashok

View 3 Replies View Related

SSIS Server Agent Open The Step Problem

Apr 19, 2006



I created jobs in SQL Server Agent. Inthe jobs I created steps which name is bankdata.But I am having a problem open the step , Following is the error am getting

"Index was outside the bounds of the array. (SqlManagerUI)

------------------------------
Program Location:

at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.PopulateGrid(JobStepsData steps)
at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.Microsoft.SqlServer.Management.SqlMgmt.IPanelForm.OnInitialization()
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.OnBeforeSelection(Object sender, TreeViewCancelEventArgs e)"

On the other hand I didn't execute the jobs.Jobs was failed when it start.

Any ideas?

Thanks for your efforts,gul007






View 1 Replies View Related

Integration Services :: SSIS Printing With Server Agent

Oct 5, 2015

SQL 2012.  VS2013..I have created a SSIS package that generated a pdf report and a script task that prints the pdf reportScript task
  
  Public Sub Main()     '
        Dim pdfFileName As String = Dts.Variables("User::CUR_ADDACSReport").Value.ToString
        Dim PrintPDF As New ProcessStartInfo
        PrintPDF.UseShellExecute = True
        PrintPDF.Verb = "print"
        PrintPDF.WindowStyle = ProcessWindowStyle.Hidden
        PrintPDF.FileName = pdfFileName
        Process.Start(PrintPDF)
        '
        Dts.TaskResult = ScriptResults.Success
    End Sub

When I run the SSIS package from VS2013 it executes and the report is printed, however when I deploy it to the SQL server as an agent job, the package executes, but the report is not pronted.

View 3 Replies View Related

SSIS Package Runs OK Manually But Not From SQL Server Agent...Permissions?

Dec 19, 2007

I have a problem where I have an SSIS package (SQL Server 2005) that won't run properly from SQL Server Agent, but it runs fine when kicked off manually from Integration Services -> Run Package or when run in debug from Visual Studio.

The first step in the package checks for the existance of a file via a script task. The script looks like this...





Code Block
Public Sub Main()

Dim TaskResult As Integer
Dim ImportFile As String = CStr(Dts.Variables("BaseDirectory").Value) + CStr(Dts.Variables("ImportDirectory").Value) + CStr(Dts.Variables("ImportFile").Value)

If Dir(ImportFile) = "" Then
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If

Return

End Sub






This script runs fine and the file is seen as expected when I run the package manually. But as a step in a SQL Server Agent job, it doesn't see the file.

The SQL Server Agent service is set to start up / log on as a Local System Account. I've also tried setting up a credential / proxy (using an account that I know can see and even move / rename the file) to run the job as but that didn't seem to help.

The package is being run from SQL Server (stored in MSDB) and is set to rely on SQL Server for sensitive information, so I don't think that's an issue; other packages are set up like this in terms of sensitive data and run fine.

Any ideas why my script can't "see" the file I'm looking at when it's kicked off by SQL Server agent? I've looked and looked...I can't seem to figure this out. I would really appreciate any help you might be able to offer up.

View 12 Replies View Related

Data Warehousing :: Running SSIS Package As Server Agent

Nov 23, 2010

My package is connecting to an external data provider using an OLEDB driver . The package runs fine in debug mode.When i tried to run the same from SQL server agent it failed  to aquire the connection. The OLEDB provider does not contain too much of information , ( connection string, initial catalog, blank user name and password).The same package executes successfully if i run using dtexec in BAT file.But if i use the dtexec in sql server job step as operating system command and try to run, the job will fail reporting " can not aquire the connection".

View 2 Replies View Related

Creating SSIS Package SQL Server Agent Job Without Sysadmin Rights

Mar 12, 2008

Hi

I have a problem i receive the following error message when i try to add an new step into a SQL Server Agent job :

Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)


This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"

I have made the following configurations:

The user group (windows group) that the user belongs has the following roles in msdb :

db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole

i have made a proxy to sql server agent which has the following subsystems :

"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.

Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.

Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.

Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.

View 1 Replies View Related

SQL Server Agent SSIS Job: Set Values Drops Leading Quote

Jul 19, 2006

We are using BCP in a Process task. The value for the path to BCP's error log requires double quotes around it. We initially put this value in a configuration file, and that worked fine. Yesterday, we eliminated the config file and tried to use the "Set Values" tab of the SSIS SQL Server Agent job to pass in this value.

The package variable was assigned the value of the path -- all except for the leading double quote. The closing quotation mark was included in the value.

We tried adding a second double quote at the beginning of the value, but that caused the job to fail immediately.

For now we will work around this problem by putting the quotes around the value in a Script task inside the package.

Has anyone else encountered this problem?

Thanks,

Ron

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved