Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error "Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts -- the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains "ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
I have a flat file which is loaded into the database on a daily basis. The file contains rows of strings which I load into a table, specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..' and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously I used SQL 2000 DTS to load the files in, and it was just a Column Transformation with the Col001 from the text file loading straight to my table column. After the load, if I select len(col) it gives me 750 for all rows.
Once I started to migrate this to SSIS, I allocated the Control Flow Task and specified the flat file source and the oledb destination, and gave the output column a type of String and output column width of 8000. But when I run the data flow task it copies only 181 or 231 characters out of the 750 required. I feel it stops where it finds the SPACES and skips the rest.
I specified row delimiters or CR, and LF. I checked the file under UltraEdit and there were no special characters in the file that would cause the problem.
Any suggestions how I can get it to load the full data?
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job. When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load." I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically: 1. The Precompile property is already set to True. 2. I have already verified that the script was compiled. Any further suggestions?
This code works in the SQL task in dts packages but not in SQL task in SSIS. It would run the file but the problem is that when there is an error it doesn't raise the error in SQL task in SSIS. Anyone can provide me with a solution would be appreciated.
USE MASTER DECLARE @result int
EXEC @result = xp_cmdshell 'dtexec /f "D:File2.dtsx"' If (@result <> 0 ) BEGIN
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte) DTExec version is 9.00.3042.00 on both servers. HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: {BE86A659-AB44-403A-9C89-3524821879E0} Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010021 Source: Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable". End Error Error: 2007-07-17 12:34:52.98 Code: 0xC0010018 Source: Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint". End Error Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014. Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. Source: Started: 12:33:21 PM Finished: 12:34:53 PM Elapsed: 91.938 seconds
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
I have developed an SSIS package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
I have VS 2013 installed in my machine with SQL server 2012 ,I have installed Microsoft data tools for VS 2013,In the integration service project  i used script component when i try to pen the script task its not opening VSTA projects ,its simple ideally without any action.I am facing this issue for past 2 months i tried fixing this problem but no use.
The script  task editor has "Access VSTA to write script using VS 2012".So i installed VSTA tools for 2012 and 2013 but no issue.
But the script component works for VS 2010.I have installed Microsoft Visual Studio tools for VS 2012,VS2012 AND VS 2013.
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file: username password cd omb asc get STRMASTER quit
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
I have a Job Step defined to execute a SSIS Package. This SSIS package contains a Script Task. The Job fails with the message "Package execution failed. The step failed."
I have a SSIS package that transfers a couple of tables from one database to another database on the same server. It works fine in most of the machines we tested with. However on one of the customer machines, it consistently fails with the error message, The Return value was unknown. The process exit code was -1073741795. The step failed.
This package runs as a scheduled job on the sql agent. When i did a sql profiler to see what is going on, i noticed that the last step before the bulk insert, it gets the collation and the schema id of the 2 tables. My guess is, it compares these values from the source and destination databases and makes sure everything is ok before copying.
On a machine where this works, it goes ahead with the the next step which is the bulk insert itself. Whereas on the machines where it doesn't work, it stops right after this step. i.e. it does not even bother to call the 'bulk insert' api. Which makes me think it is doing some kind of validation with these values and it is getting something that is not expected.
If the collation or the schema was an issue, why throw an 'return value unknown' error? Can the error be more specific? Any other possible reasons for such a behavior? Any clues?
I am trying to execute an SSIS package from a client that contains an Analysis Services Processing Task in the package. The client that does not have SSIS and SSAS installed. We are getting an error
The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It requires a higher level edition. The same package runs from a server that has both SSIS and SSAS installed. Let me know if someone has come across the same problem.
Please... any ideas? Is this a footprint config issue?
TITLE: Microsoft Visual Studio
There was an error displaying the preview.
ADDITIONAL INFORMATION:
Could not load file or assembly 'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
BUTTONS:
OK
===================================
There was an error displaying the preview. (Microsoft Visual Studio)
===================================
Could not load file or assembly 'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.PipelineUtils.ShowDataPreview(String sqlStatement, ConnectionManager connectionManager, Control parentWindow, IServiceProvider serviceProvider, IDTSExternalMetadataColumnCollection90 externalColumns)
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowConnectionPage.previewButton_Click(Object sender, EventArgs e)
This one has set me back many, many hours on this project; it's about got me ready to dump SSIS & just roll a custom .NET solution in C#.
I need to create import packages for quite a few very wide flat files (130 - 180+ columns, not my design). Many of these columns have data > 50 characters long.
I change column widths on the data flow source using the Advanced Editor, via Input and Output Properties ==> Flat File Source Output ==> External Columns.
About 50% of the time, the changes vanish after clicking OK to dismiss the Advanced Editor. There is no warning message or output announcing that the editor failed to persist its changes, or that it set some columns' properties back to the defaults, or why. The column's widths just silently revert back to 50.
If the cause and resolution aren't known, does anyone know of a way to accomplish any of the following workarounds?
Create a data source connection by importing an external text schema defining the flat file's column names, data types and sizes, or Change a property on multiple source columns en-masse, or...
Get at a text version of the file containing the Data Flow Component's definition, so we can edit wide import schemas without racking up thousands of mouse-clicks?Thanks! A virtual cheeseburger to anyone with answers.
I have problem here with sql task editor. i have a stored proceedure with 1 input value and 1 output value which needs to be updated in a variable.
stored proc - exec GetRDate ? , ? output
input value is set in a varaible.
I tried giving 1 input and 1 output in the parameter box and result set as fullresultset 1 value for variable -
" failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Get Retention Date
what should i give in the parameter and result set
This error is pretty persistent. I re-installed VS 2005 and SQL Server 2005 but did not help. Every time I try to open a Script Task editor it gives me the same error regardless of the project or package. DO I NEED TO REBUILD MY SYSTEM ?
===================================
Cannot show the editor for this task. (Microsoft Visual Studio)
===================================
Specified cast is not valid. (Microsoft.VisualBasic.Vsa.DT)
------------------------------ Program Location:
at Microsoft.VisualBasic.Vsa.Dt.VsaIDE.get_ExtensibilityObject() at Microsoft.SqlServer.VSAHosting.DesignTime.get_ExtensibilityObject() at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskUI.Dispose() at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskMainWnd.Dispose(Boolean disposing) at System.ComponentModel.Component.Dispose() at Microsoft.DataTransformationServices.Design.DtrPackageDesigner.DoDefaultActionForTask(TaskHost task)
I am using SSIS 2008 tool for developing ETL package. I get below error whenever I click on script task editor.Cannot show Visual Studio 2008 Tools for Applications editor. (Microsoft Visual Studio).
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
Sometime ago i had to edit a dts package in ssis. To do that i've instaled the sql2005 dts. It worked fine at the time. But now i'm trying to open a dts in ssis after installing sp2 and it doesn't work. Every time i try to open a dts package i got the following error.
Error HRESULT E_FAIL has been returned from a call to a COM component. (Microsoft Visual Studio)
------------------------------ Program Location:
at DTS.CDTSLegacyDesignerClass.ShowDesigner() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.GeneralView.btnEdit_Click(Object sender, EventArgs args)
I dont understand why this is happening. Just one thing i use to have windows server 2003 now i've xp sp2. I don´t know if this can be important but.
Dear Friends, In my controlFlow I have 2 sequence container... Sequence1 goes to Sequence2 if an expression valuate to TRUE. If the expression value is true, than there isn's any problem and sequence2 runs, but if the expression is FALSE the sequence2 container doesn't run.
OK? In the case of expression valueate to FALSE I need to generate an error or an information in order to get it in the eventhandler automatic... I can add a script task to make the package failure... but what I insert in the precedence constraint editor from Sequence1 to the scripttask?
Imagine... the expression from Sequence1 to Sequence2 is a>=b The expression from Sequence1 to ScriotTask os a<b? (How can I define this only to run when the expression (seq1 to Seq2) is false??
I cannot set a breakpoint in a Script task and have it complete successfully. I am running Vista 32-bit and only the workstation tools for SQL Server 2005 SP2. The steps to recreate are:
1) Create a new SSIS project/package. 2) Add a Script Task. 3) Set a breakpoint in the Script Task. 4) Run the package.
When I remove the breakpoint, the script task succeeds. When I put it back the task fails. The execution results say "Error: The script files failed to load." I completely uninstalled all SQL Server 2005-related entries using the Programs and Features control panel, rebooted, reinstalled the Workstation Tools, then applied a freshly-downloaded SQL Server 2005 SP2 and rebooted. If I change "RecompileScriptIntoBinaryCode" to false the script fails whether there's a breakpoint or not. If it's true (the default), the script only fails when a breakpoint is set. I would like to be able to set a breakpoint to assist in debugging the package. For the time being, I can move the package to a different (non-Vista) OS, where it works fine, but I would like to be able to develop and debug on Vista.
MSI (s) (80!8C) [11:25:26:067]: Transforming table Error.
MSI (s) (80!8C) [11:25:26:067]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (80!8C) [11:25:26:067]: Product: Microsoft SQL Server 2005 Tools (64-bit) -- Error 29549. Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified. <EndFunc Name='LaunchFunction' Return='-2147024894' GetLastError='0'> MSI (s) (80:70) [11:25:26:333]: Executing op: Header(Signature=1397708873,Version=301,Timestamp=914840316,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1) MSI (s) (80:70) [11:25:26:333]: Executing op: DialogInfo(Type=0,Argument=1033) MSI (s) (80:70) [11:25:26:333]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005 Tools (64-bit)) MSI (s) (80:70) [11:25:26:333]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1]) MSI (s) (80:70) [11:25:26:333]: Executing op: RegisterBackupFile(File=C:Config.Msi6d67d1.rbf)
I am having a problem in the Business Intelligence Development Studio. When I add and try to edit a Script Task or a Script Component, I click on the Design Script button and get one of two errors. For the Script task I get an error that states:
Cannot show the editor for this task. (Microsoft Visual Studio)
For the Script component I get:
Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio)
For some reason or another it just will not start Visual Studio for Applications. I have uninstalled an re-installed several times. I have also researched and discovered that there is a bug when C# tasks are include in the project. However, this is not the case. Please help!
Hi All, I am trying to restore a DB from my production to Standby server..it gives me a mesage "Msg 3105, Level 16, State 1 Data on dump will not fit into current database. Need 6500 Mbyte database."
The production server DB size is 5000MB and I have increased the size of standby DB to 6500MB but still the same message...
