SSIS And E-mail Import
Jun 15, 2007
Hi all,
I need to import data into my SQL Server 2005 from an E-mail datasource. It means that when a mail is send to a particular address I must retrieve the mail content or the attached file (in XML) and then I must import these data in my SQL Server 2005.
I am new in SSIS and I don't know if I can perform the import task with SSIS (with a POP3 or IMAP connector) or only with SQL Server 2005 (stored procedures) or can I manage it with C# .Net.
Thanks for your help.
Regards,
Michelle
View 1 Replies
ADVERTISEMENT
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Apr 26, 2008
Hi. I need to import excel file in database. i first need to do an unpivot task. the column names are dates and SSIS seems to be unable to pick up the column name as it is replaced by F2 F3 F4etc Can you advise of a solution. thanks ken
View 1 Replies
View Related
Sep 8, 2006
Please help me i am new to ssis ....I am trying to send an email using mail task and I am sure that ISP works fine with smtp. I am entering all the correct information in the task but it takes a long time to run the task and then comes back with a failure error. can someone help me find an easy way to send an email to group of emails...I even tried to send it to 1 email and it is still not working.
View 10 Replies
View Related
Oct 31, 2007
I am right now looking at the new functionality in SSIS to cover some of the ways we can streamline proceses in the company. I know that SSIS has SendMail tasks, however I was wondering if there is any functionality for going out and receiving mail and parsing those messages in? Would this have to be done as custom code within SSIS and if so can anyone direct me to what would be needed to do so? Thanks.
View 4 Replies
View Related
Apr 18, 2007
I have a bunch of SQL 2000 DTS packages that use ActiveX Script tasks to search for, move and process emails via the Outlook COM object that I need to migrate to SQL Server 2005. Since COM references can't be used with the SSIS script task how would I go about accomplishing this? Thanks.
View 2 Replies
View Related
May 25, 2007
Hi All,
When I am execute the SSIS packages in my machine, it is working fine,
The SSIS package contains Send Mail task, but if the same application is executed by my colleague,
he is getting the error "Failure Sending mail", but he was able to execute the same application successfully previouly. but he can able to send the mail from his outlook.
Any suggestions appreciated.
Regards,
Nathan
View 2 Replies
View Related
Mar 20, 2008
I'm having some trouble with a new SQL 2005 Server. Database mail is configured/enabled. I've used SSIS to create a package that exports data to an Excel spreadsheet and e-mails the file to a user (currently, me).
The Send Mail Task will send a message with the file attached from SSIS while debugging the package but once the package is compiled (no errors compiling) and executed from a job, I don't get the mail message. SQL Server Agent reports successful completion of the job.
I decided to add the Send Mail step as an Execute SQL Task which calls the sp_send_dbmail proc. I can send mail with the attached file from Query Analyzer using sp_send_dbmail. It sends the message successfully in debug mode within SSIS as well. However, once compiled and deployed, it fails to send the message when called from a job. Again, SQL Server Agent reports successful completion of the job but the e-mail never comes.
MSSQL and SQL Server Agent are running under a domain account that is a local admin and member of the sysadmin role.
sp_send_dbmail is using a public profile in Database Mail.
Any ideas?
Thanks!
View 5 Replies
View Related
Nov 14, 2007
I'm trying to create a SSIS package that will send me a email when the package runs successfully and when it fails. My entire package runs successfully until it get to the Send Mail Task, where it always fails. Do I have to configure something on the database end or what? Thank you in advance.
Using SQL Server 2005
Using sample database AdventureWorks
View 4 Replies
View Related
Dec 10, 2007
Hi
I had a DTS package on sql2000 which i migrated succesfully to Sql2005 and im able to open the package and execute the package.Now i want to add a new database mail component on this package to send emails to recepients.In short i dont want to use SQL Mail component of Sql2000 which required outlook components,instead i want to use the new features of SSIS to my package which was designed on sql2000.
Is it possible to use the SSIS new features to be incorporated on my old DTS package?
Thanks in advance
Regards
Arvind
View 1 Replies
View Related
Dec 10, 2007
Hi
I am trying send email using my pop3 account in SSIS. No field found give password. Please help to how to configure my pop3 to send mails in SSIS.
Thanks and Regards
Balasubramani
View 1 Replies
View Related
Sep 13, 2006
SSIS dynamic SMTP mail server
Hi All,
I'm trying to make my SEND MAIL TASK in SSIS dynamic, by retrieving SMTP Server name (amongst other email message information) from a table.
I've got an SP that is getting the information into package variable's, and when I don't try and have a dynamic server name (i.e. I use a specified SMTP server in my SMPT Server connection), then the email get sent off.
I'm trying to use an expression to build alter the send mail to use the server name I have in a user variable.
I've tried using the expression for the property:
SmtpConnection set to: RTRIM( @[User::MailServer])
I also tried without the RTRIM - I only added it because the error messages seem to include a full 'string' length, and there doesn't seem to be a 'varchar' data type for SSIS variables.
so:
a> Is SMTPConnection the property I need to be setting? None of the others seem correct
b> If SMTPConnection IS the property I need, does the value give the SMTP Server Name, or just the Name of the connection from the Connection Manager's?
Thanks
Part-Answer to:
b> The SMPTConnection property sets the name of the CONNECTION to be used. That Connection needs to set the name of the server. So n ow, the question becomes, how do I configure that from SQL (I know how to use package configurations from XML files).
View 1 Replies
View Related
Jun 6, 2006
Hi,
I have got the problem connected with Send Mail Task in SSIS.
The general idea was: sending email alert to different email users. I tried to use Foreach Loop task which loops through dataset (where the emails are stored) and assign different email addresses to SSIS package variable.
When I try to use this task inside Foreach Loop task I receive this error message: "Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "The parameter 'address' cannot be an empty string."
The SSIS package has variable (string) which is binded with ToLine - property of Send Mail task (it was set up in Expressions tab of Send Mail task). This ToLine property should assign different emails during every loop of Foreach Loop task.
But unfortunately is seems to be not true, because Send Mail task does not allow to assign different values to ToLine property while is in Run-Time.
Have you discovered this quite bizzare Send Mail task behaviour before ??
I appreciate every help and suggestions.
Thanks,Marek
View 25 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Oct 2, 2007
If this is a duplicate post I apologise in advance as my search yielded many results about mail alerts but none like this.
The scenario is my SSIS package is scheduled to read data from a remote FoxPro source. If for any reason it fails I have set up an email task to alert internal users and an external helpdesk.
My problem is that if I am running it via Management Studio i.e. SQL Server Agent/Jobs/Start Job and I 'force a failure' by unplugging the network cable it successfully sends an email alert to all recipients (internal and external). If I let the job execute according to the schedule (still with the network cable unplugged) the job fails (as expected) but no email alerts are sent.
I log onto the server with a valid domain user account who has administrative rights to the server as well as dbo rights on the SQL instance. I deploy my package as the domain user and have checked that the domain user is also the 'owner' of the scheduled job.
I suspect it has something to do with ownership or which user is 'truly executing the scheduled job'. Any ideas would be welcome.
Thanks in advance, Craig
View 1 Replies
View Related
Aug 31, 2006
Hey there all,
i am having a weird problem with the send mail task in SSIS. I have tried to different things, and i end up with two different errors:
Firstly, i have setup a data dump to excel, and the send mail taks emails this to specific email addresses.
In the Send mail task i have validated to SMTP server, and its correct.
I have manually entered all the information in the Send mail task, and i am sending to multiple email addresses. These are all seperated by a semi colan. I run the task and it fails on the send mail task with the follwoing error:
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Unable to send to all recipients.".
Task failed: Send Mail Task
I have validated all the email address and they are correct. I did some searching and someone suggested to replace the semi colan with a comma. I do this and i get the follwoing error"
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Mailbox unavailable. The server response was: 5.7.1 Unable to relay for rpwallis@bigpond.com.au".
I have checked that the IP for the SQL server is on the list of allowed relays on our exchange server. Does it make a difference if i am running this from Visual studio on my laptop?? by this, does it pick up the ip of my laptop when i test this or does it use the ip address of the server?? This would explain the relay message error if so..
Could someone please explain if i should use comma's or semi colans to seperate email addresses? and also lead me in the right direction in relatio to my problems..
Many thanks in advance
Scott Lancaster
View 3 Replies
View Related
Mar 3, 2008
HI !
I need help to fix SSIS Send Mail Task Error.
I have a
Data Flow
Read from Sql Data base and then put the query result into excel file
(OLE DB Source --> Excel Destination)
Send Mail Task
Email excel file from the data flow
Control Flow :
Data Flow --> Send Mail Task
The package throws an error below. I tried to disable my antivirus because i thought it's throwing an error because of the antivirus.
But, it's still throwing the same error. If i tried to send email without attachment, it works just fine.
Is there anybody know how to fix this?
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
View 3 Replies
View Related
May 19, 2008
Hi,
i created a ssis task "send mail" and everything works fine. I uses parameter to pass recipient-email-address, mail-subject and mail-body.
Now I like to use linebreaks in the mail-body but I don't know how. I tried:
'my mail text ' + char(13) + char(10) + ' next line for my mail'
I also tried: 'my mail text next line for my mail' and 'my mail text \n next line for my mail'
I created a procedure to run the dts-package with the following code:
Code Snippet
@toAddress VARCHAR(255),
@subject VARCHAR(255),
@mailBody VARCHAR(max),
@exitcode INT = 0 OUTPUT
AS
SET NOCOUNT ON
--lokale Variablen
DECLARE @String VARCHAR(1024)
BEGIN TRY
-- next line just for testing linebreak
SET @mailBody = 'line one in mail ' + char(13) + char(10) + 'next line in mail'
SET @String='dtexec /Ser <myServerName> /SQ DELELPLGDB01/DTS-Pakete/pkt_sendMail /Set Package ask_sendMail.Variables[Benutzer::toAddress].Value;"'+@toAddress+'" /Set Package ask_sendMail.Variables[Benutzer::subject].Value;"'+@subject+'" /Set Package ask_sendMail.Variables[Benutzer::mailBody].Value;"'+@mailBody+'"'
EXEC @exitcode = master.dbo.XP_CMDSHELL @String
select @exitcode as exitcode
END TRY
Thanks for your Help.
MatDie
View 11 Replies
View Related
Jun 1, 2015
I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:
"E:ReportingDelivered_ReportsExcelName_"+
((DT_WSTR,4)Year(@[System::StartTime]))+
RIGHT("0"+((DT_WSTR,2)Month(@[System::StartTime])),2)+
RIGHT("0"+((DT_WSTR,2)Day(@[System::StartTime])),2)+".xls"
I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.
View 7 Replies
View Related
Feb 10, 2007
In MS Excel, the ability exists to run a "web query." This functionis accessed via the data menu's import external data option. The webquery wizard accepts a URL address, and then is able to import thedata from that address into an excel worksheet.What I would like to do is use SSIS to import data from the same website. In other words, I now use Excel's web query functionality toimport data from a website with a url of xyz.asp. I save the excelworkbook, and then run a DTS package to import the data into SQLServer. I would like to entirely bypass Excel, instead of using it asan intermediary to bring data from the asp site into SQL Server.However, I can't figure out how to set up the connection from SQLServer. I am using SQL Server 2005, SSIS. Is there a way to haveSSIS open the asp website, extract the data and import it into a SQLServer table?For the record, this is not XML data.Thanks.
View 1 Replies
View Related
Nov 15, 2007
I am trying to import either .csv or excel files using the SSIS import/export tool in Visual Studio and/or managment studio. the data does import in but I am loosing some data in the files, most often date fields.
View 1 Replies
View Related
Feb 4, 2008
An excel spreadsheet has to be open on Machine B on the network to pull data from a third party tool.
I have to refresh several columns in this spreadsheet every minute with new data.
Every time there is a new data into the columns i.e. columns 7 and 10, the spreadsheet pulls data from the third party tool automatically and populates other columns i.e. columns 12-15.
Then I will have to retrieve the new data from the spreadsheet into sql server 2005.
So first I wrote a query to use to populate the spreadsheet each time with the result using Import Wizard.
It gives an error: 0xc0202009
And I am not sure if my approach for this project is correct?
What do you think?
Thanks
View 1 Replies
View Related
Mar 12, 2008
Im trying to create a DTS package to import an Excel spreadsheet in to SQL Server 2005 and them Export to a text file. I have successfully imported the data using the import/export wizard, but I am unsure how to add the step that exports the data into a text file. Any ideas or links to a resource that may help me?
Thanks in advance!
View 6 Replies
View Related
Mar 16, 2008
I am new to SQL Server and am trying to import rows from Excel using SSIS and am getting the following error.
Does anyone have any ideas on how to resolve??
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has started.
Error: 0xC0202009 at Data Flow Task, OLE DB Destination [583]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert the value NULL into column 'SupplierID', table 'Northwind.dbo.Suppliers'; column does not allow nulls. INSERT fails.".
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has ended.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (583) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (583)" wrote 1 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
View 1 Replies
View Related
Sep 4, 2007
I am trying to take the national weather service XML snaphot and import into a SQL 2005 DB
http://www.weather.gov/data/current_obs/KHOT.xml
in theory this looks like it should work, but I get no data every time it runs
here is a sample of myXML source
<?xml version="1.0" encoding="ISO-8859-1"?>
<current_observation version="1.0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.weather.gov/data/current_obs/current_observation.xsd">
<credit>NOAA's National Weather Service</credit>
<credit_URL>http://weather.gov/</credit_URL>
<image>
<url>http://weather.gov/images/xml_logo.gif</url>
<title>NOAA's National Weather Service</title>
<link>http://weather.gov</link>
</image>
<suggested_pickup>15 minutes after the hour</suggested_pickup>
<suggested_pickup_period>60</suggested_pickup_period>
<location>Hot Springs, Memorial Field Airport, AR</location>
<station_id>KHOT</station_id>
<latitude>34.480</latitude>
<longitude>-93.100</longitude>
<observation_time>Last Updated on Sep 4, 12:53 pm CDT</observation_time>
<observation_time_rfc822>Tue, 4 Sep 2007 12:53:00 -0500 CDT</observation_time_rfc822>
<weather>Overcast</weather>
<temperature_string>81 F (27 C)</temperature_string>
<temp_f>81</temp_f>
<temp_c>27</temp_c>
<relative_humidity>74</relative_humidity>
<wind_string>From the South at 5 MPH</wind_string>
<wind_dir>South</wind_dir>
<wind_degrees>180</wind_degrees>
<wind_mph>4.6</wind_mph>
<wind_gust_mph>NA</wind_gust_mph>
<pressure_string>30.04" (1016.6 mb)</pressure_string>
<pressure_mb>1016.6</pressure_mb>
<pressure_in>30.04</pressure_in>
<dewpoint_string>72 F (22 C)</dewpoint_string>
<dewpoint_f>72</dewpoint_f>
<dewpoint_c>22</dewpoint_c>
<heat_index_string>85 F (29 C)</heat_index_string>
<heat_index_f>85</heat_index_f>
<heat_index_c>29</heat_index_c>
<windchill_string>NA</windchill_string>
<windchill_f>NA</windchill_f>
<windchill_c>NA</windchill_c>
<visibility_mi>10.00</visibility_mi>
<icon_url_base>http://weather.gov/weather/images/fcicons/</icon_url_base>
<icon_url_name>ovc.jpg</icon_url_name>
<two_day_history_url>http://www.weather.gov/data/obhistory/KHOT.html</two_day_history_url>
<ob_url>http://www.nws.noaa.gov/data/METAR/KHOT.1.txt</ob_url>
<disclaimer_url>http://weather.gov/disclaimer.html</disclaimer_url>
<copyright_url>http://weather.gov/disclaimer.html</copyright_url>
<privacy_policy_url>http://weather.gov/notice.html</privacy_policy_url>
</current_observation>
View 14 Replies
View Related
Sep 27, 2007
Hi msdn forum members,
I need to import data from another server using Express edition every minute.
So I ran the import wizard, and I saved the packaged on the hard drive.
Then when I try to make a new job and new schedule for scheduling, I can't seem to find SQL server integration service option for the Type.
does anybody have any idea why I can't see SSIS there or had the same problem??
Or is there another way of importing data every minuite other than this?
BTW my server is 2005 standard edition.
Thanks in advance,
Mike Kim
View 10 Replies
View Related
Aug 31, 2006
I created a package using the import utility and have it opened in Business Intelligence Development Studio. Can someone explain to me how I can run this import from here?
Thanks
Scott
View 1 Replies
View Related
Oct 30, 2007
I'm getting an error message (see below ) using the SSIS Import and Export Wizard to read in IBM DB2 databases on a XP 64 machine. I'm trying to import the DB2 (8.2.8) tables from IBM/AIX to SQL Server 2005. I have the IBM Client V8 with Fixpak 14 installed on the computer.
Using IBM OLE DB Provider for DB2 ( testing connection is fine ) for Data Source
Using Microsoft OLE DB Provider for SQL Server for Destination to SQL 2005 database (also tried SQL native Client )
During the next screen "Copy data from one or more tables or views" I get the following error and no tables show up.
CLI0102E Invalid Conversion. SQLSTATE=07006
Additional Information
CLI0102E Invalid Conversion. SQLSTATE=07006 ( IBM OLE DB Provider for DB2)
I've checked on BLOBs and CLOBs in the tables on the DB2 side and none of the tables I have access to have them (but there are tables with BLOBs and CLOBs in them). I haven't checked on decimal conversion but I've seen DB2 Decimal (30,15) columns in some tables.
If someone could tell me the steps and tables that the Wizard uses to build the table list from, I'll go into DB2 Command Center and run a few queries.
I've also tried the MS OLE DB for DB2 Provider but I get an error message on the authentication method not being supported.
Thanks
View 4 Replies
View Related
Jul 20, 2006
In SQL Server 2000 DTS there is an Extended Connection properties
window that you can set the IMEX property for importing Excel
spreadsheets into a SQL Server table. Does anyone know where this is
in SQL Server 2005 SSIS?
Thanks,
View 5 Replies
View Related
Feb 4, 2008
An excel spreadsheet has to be open on Machine B on the network to pull data from a third party tool.
I have to refresh several columns in this spreadsheet every minute with new data.
Every time there is a new data into the columns i.e. columns 7 and 10, the spreadsheet pulls data from the third party tool automatically and populates other columns i.e. columns 12-15.
Then I will have to retrieve the new data from the spreadsheet into sql server 2005.
So first I wrote a query to use to populate the spreadsheet each time with the result using Import Wizard.
It gives an error: 0xc0202009
And I am not sure if my approach for this project is correct?
What do you think?
Thanks
View 2 Replies
View Related
Feb 18, 2007
Getting started.
Hello All
First time setting up A SSIS
Trying to import a excel that creates a new table called lockbox.
Does not import any records from Columns-Contract Id, Owner ID,
that have a null value.
Then in the Site Id -that is a number value- change to a text value
and update it to it text value.
for example: Site Id Column
2 = Ell
3 = CSI
12 = Ell2
Can someone get me started in the right direction?
Thanks for your time and help
JK
View 1 Replies
View Related
Aug 7, 2007
I have Sql Server 2005 Developer Edition and Sql Server Management Studio.I'm trying to import data but there are no options available under "Projects" in SSMS.Do I need to download an update or anything to use this functionality?
Thanks
View 2 Replies
View Related
