SSIS Child Package Not Executing.
Feb 26, 2008
I have a parent package that calls a child package. When this is executed on SQL server (the actual server host SSIS services) it executes fine I can see data in the correct tables and I can determine that is ran. But I try to run this from my local pc within the designer (Visual Studios) and the parent package runs a few task that are before the child package task but once it gets to the child package it stops. I have set breakpoint on several task with the parent package and I can step thru them but once it gets to the child it tries to run it then the execute package task object turns red. I can not find any error messages or codes. I even have beak points set up on the child package itself and the process never hits those break points but I'm assuming is cause is puking before I get to the child package.
The child package is stored in SQL server and is in MSDB.
I just want to debug the child packages from BIDS or visual studios?
any one know how to debug child packages from BIDS or Visual Studios?
I can if I run the child package by itself but I need to test from end to end ....so within the parent packages which calls a few child packages..
thanks
View 3 Replies
ADVERTISEMENT
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
Oct 18, 2006
I have installed Office 2007 Beta 2 and SQL Server 2005 at my system.
I made 2 packages (C:Package.dtsx, C:Package1.dtsx). I am executing Package1 inside Package.dtsx using Executing Package Task.
In package1.dtsx there is some configuration that is coming at runtime(For each loop container having some file connections) , so I have put DelayValidation property of this package to True, but that did not work when I called this package from Package1.dtsx, then I found one workaround, I changed the ExecuteOutOfProcess of ExecutePacakge task to True,
Now the problem is that before installing Office 2007 the both were executing fine (it was taking some time in starting the second package because of OutOfProcess execution).
After installing Office 2007 I get the following error while executing the second package from first package.
Error: Error 0x800703E6 while loading package file "C:Package1.dtsx". Invalid access to memory location. .
This problem comes whenever the I execute the package having OutOfProcess property to true.
Is there any workaround for this, or I am wrong somewhere.
Thanks in advance.
Atul
View 3 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Oct 29, 2007
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
View 3 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Dec 21, 2007
Hi All,
I hav a strange problem. I created a SSIS package on my machine with protection level as "EncryptAllWithPassword".
When I deploy this package on a SQL Server on another machine (either in File System or SQL Server)and add it as a job in SQL Server Agent and try to run it through a scheduler or manually the job fails with the following message -
Executed as user:IBM-P4-1976SYSTEM. The package could not be loaded. The step failed.
However if I deploy it on my own machine the job runs successfully.
Also if I run the package using dtexec utility on the another machine it runs successfully.
It is not running as a job on another machine. All the logged in users have administrative rights. My databases are altogether on a different server.
Can any one help me out with this issue...Pleassssseeee...
View 1 Replies
View Related
Feb 4, 2008
Can someone tell me the best way to "automatically" execute a SSIS package. I have approximately 100 computers that I need to execute packages on. Here is the scenario:
I have some text files that are coming from our AS400 to a local computer (the package will NOT be used to bring files from our AS400. I will be using Client Access for that). The text files will be stored in a specified directory on the local computer. I will be importing these text files into a SQL Database on all 100 machines. Once I create the Import Package, what is the best way to execute this package on the devices?
I thought maybe after creating the package, I can put an EXE on the desktop that will execute the SSIS package. This way all I would have to do is click a icon on the desktop. I don't know if this is feasible or not. After building a package, do you make it a EXE or what? Pease advise. Thank in advance.
View 2 Replies
View Related
Mar 24, 2006
Hi again
First I explain my environment:
- SSIS Packages are stored on 64bit Server (Win 2003 64bit, SQL 2005 64bit)
- .NET (C#) application (on Win 2003 32bit Server) which loads and executes the SSIS Packages.
I can execute my SSIS Package localy on the 64bit Server and they work fine.
When I execute the SSIS Package from the Application I get following exeption:
Retrieving the COM class factory for component with CLSID {697AC67E-FDD5-46D1-90D7-F3D0DF1B2A47} failed due to the following error: 80040154. ...
at Microsoft.SqlServer.Dts.Runtime.Package..ctor()
The code looks like:
Microsoft.SqlServer.Dts.Runtime.Package local_Package = new Microsoft.SqlServer.Dts.Runtime.Package();
Microsoft.SqlServer.Dts.Runtime.DTSExecResult local_DTSExecResult = new Microsoft.SqlServer.Dts.Runtime.DTSExecResult();
Microsoft.SqlServer.Dts.Runtime.Application local_Application = new Microsoft.SqlServer.Dts.Runtime.Application();
local_Package = local_Application.LoadFromDtsServer("PackageName", "64bitServer", null);
local_DTSExecResult = local_Package.Execute();
Other question would be: how can I execute a package directly on the server??
I mean without "LoadPackage"?? I guess the problem on top is because on the
32bit Server there is only Framework installed but not Integration Services Tools ...
Would be happy for any comment!
Best regards
Frank Uray
View 5 Replies
View Related
Oct 24, 2007
Hi,
I have created a SSIS package through SSIS Tool. Protection Level is 'EncryptSensitiveWithUserKey'. When I execute , it works fine.
I have written a code to execute SSIS package through .net application. When i try in my local PC. The package works fine.
When I deployed in Webserver, it throws an error,
DTS Package: Package1 failed. Error Details as follows. 1. Source : Execute SQL Task Description : Failed to acquire connection "DatabaseConnection ADO.NET". Connection may not be configured correctly or you may not have the right permissions on this connection.
"DatabaseConnection ADO.NET". is a connection which is specified in the SSIS.
Can any one pls tell me how to solve this issue.
Thanks & Regards,
Ganesan
View 4 Replies
View Related
Feb 7, 2006
Hi
I have having trouble getting my hands around how to retrieve variables from a parent package. I read about the Environment variables and Configuration File at the parent package level and the Parent Package variable at the child level.
Here are my questions:
1. Can you only store/retrieve 1 variable in a config file at a time?
2. Does the child package have to define the variables and if so, do they have to be the same names as the parent package?
This seems so more more complex then the DTS2000 way of passing variables to and from packages.
Any help would be appreciated.
Thanks in advance,
Gordon Radley
View 7 Replies
View Related
Jul 3, 2007
Is it possible to execute an SSIS package from Linux? Before with 2005, we were able to execute a job that would execute the DTS, now we're trying to execute an SSIS package in 2005.
---
"Try not to become a man of success but rather try to become a man of value."
View 3 Replies
View Related
Aug 14, 2007
I migrated the DTS package to SSIS package using the migration wizard...
but when i try to execute it it gives the following error plz help ...
error : Error retrieving file name for a component failed with the error code 0x043A1034
any suggestions ...
View 8 Replies
View Related
Feb 22, 2008
Is it possible to execute a child package from a parent package ashnchronously.
I have a SQL Server table containing a list of packages to execute. I want to create a master package that will query this table, and execute each of the packages asynchronously.
I've tried using the Execute Package task and also executing packages programtically from a Script task, but these only seem to work synchronously.
I have also seen suggestions about executing packages asynchronously from T-SQL by starting a job, however, I'd rather not have to dynamically create jobs for each package I want to execute.
Any ideas would be welcome. Or even an answer of "No this is not possible".
Thanks in advance
View 3 Replies
View Related
Mar 17, 2008
I am trying to execute a ssis package, where a user will be able to excute the package from an ASP page, the user will select a file, this will be the source file for the SSIS package, this will change when ever the package is executed, I was thinking of just using a sqlClient.sqlCommand and editing the command text and excuting it that way, or through a SP, would this be the best solution? Is there a better solution? and if not what would be the SQL command to execute the package, along with editing the variable?
View 4 Replies
View Related
Mar 7, 2008
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain.
Your help will be very helpfull since this is the production issues.
Thanks,
Ashok
View 4 Replies
View Related
Apr 2, 2008
HI,
I am facing a problem in my packages. Whn I execute them in Visual Studio, it works fine but when I execute as standalone i.e by Cmd or by Double clicking on it, it throw PRODUCTLEVELTOERROR and "This component requires higher version of SSIS". I have SSIS running on my system as service and my SQL version is as below:
Microsoft SQL Server 2005 - 9.00.3186.00 (X64) Aug 11 2007 05:31:24 Copyright 1988-2005 Microsoft Corporation Developer Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I went through some sites and they say the issue is SSIS service not running or Standard version of SSIS. But my SSIS version and ssis service are both fine.
I went through http://msdn2.microsoft.com/en-us/library/ms143761.aspx and as per this it should be working on my system. Can anybody explain the reason why I am getting this error. Also, in one of my components, I am using reflection but this should not be an issue.
Thanks in advance.
Regards
View 3 Replies
View Related
Dec 19, 2007
I have a package which reads from a source, does some transformation and then loads into a target table(custom transformation build to handle multiple scenarios for insert/update/delete etc). For couple of packages, I am facing an unusual problem. The package gets stuck after executing for some records. There is no data flow in the buffer. But again, if I stop executing the package and run it again, it runs through fine.
Any idea what could be issue or what particularly I should be looking for in order to debug this issue.
Thanks,
Manish
View 1 Replies
View Related
Aug 23, 2006
I have scheduled an SQL Job to run every 15 mins. This runs an SSIS package. But sometimes my package might execute for more than 15 mins. In this case, a second instance of the package would start. I don't want this to happen. So is there any way I can check whether the package is already running before I continue the execution of the same. Right now I am using a mutex to handle this problem. Are there any problems using the mutex and is there a better way to handle this?
Thanks in advance.
Sumesh
View 11 Replies
View Related
Jun 6, 2007
Hi,
I am using C# exe to run the SSIS packages. I have placed the SSIS packages in a folder. So everytime i try to execute the SSIS through the exe i get the error "
An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user '[UserName]'.".
While creating the SSIS, i have saved the password. But when i open the SSIS to check I just see that the password field is blank.
Is there any other property which i need to set to keep the password saved forever??
Regards,
View 1 Replies
View Related
Oct 10, 2007
I have a SSIS Package that I am executing from a Web service. The SSIS Package is stored as a file. That works fine. In the SSIS package I have one ADO.NET, .Net ProvidersSqlClient Connection. For the Protection Level I have EncryptSensitiveWithUserKey.
My problem comes when I change the Protection Level to EncryptSensitiveWithPassword. Now the SSIS package is throwing an error when trying to connect to the sql database: Login failed for user _ _
I believe my problem is that I don€™t know how to pass the password of the SSIS package from the Web service into the SSIS package.
Below is part of the code for the Web service:
<WebMethod()> _
Public Function LaunchSSISPackage( _
ByVal variableName As String, _
ByVal variableValue As Object) As Integer 'DTSExecResult
Dim packagePath As String
Dim myPackage As Package
Dim integrationServices As New Application
Dim SSISvar As Variable
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
SSISvar = myPackage.Variables.Add(variableName, False, "User", variableValue)
LaunchSSISPackage = myPackage.Execute()
I appreciate your help with this issue I am having. Thank You.
View 4 Replies
View Related
Jun 23, 2006
Hi,
I having a problem getting the child package variable values into a parent package. Here is the scenario;
I have parent package(Master) calling two child packages using execute package task. I have no problem to pass variable values from the parent to child using the parent configuration but not able to get the variable values from the child to parent. I am setting the package status in each child package based on certain conditions and determine the final status in a parent based on child package variable statuses. Does any body have any idea? I will appreciate your thoughts.Thanks..Mako
View 3 Replies
View Related
Oct 22, 2007
How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
Thanks
View 1 Replies
View Related
May 24, 2006
In SQL Server 2005 I need a stored procedure that will execute an SSIS Package for me. There is some earlier stuff on the board but I don't understand it. I don't want to create a Job to do it if I don't have to.
Thanks,
George Cooper
View 3 Replies
View Related
Feb 7, 2007
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
View 4 Replies
View Related
Mar 31, 2006
I have a small SSIS package which:
- drops existing table in Excel,
- creates a new one in Excel,
- copies data from SQL to newly created sheet.
So there are 2 connections: one to a excel file, and second to SQL using sa account. I am working on my account belonging to Administrators group.
SQL Server and Excel file are on my development machine. Everything works ok when I run package from file system using DTExecUI.exe (in context of my user belonging to Administrator group). But when I have created job to execute this package problem with security occured. Even assigning local account on which SQL Server and SQL Server Agent works to Administrator group do not help. I have simulated what can happen when running DTExecUI.exe utility in contex of different user. I have used Administrator (I start it using "Run As..." from context menu in Explorer"). And what occured, SSIS package can not login to SQL Server using sa user!
1. Why running DTExecUI.exe in context of different user impact login to SQL on sa accout? If it were Windows Integrated I could understand it.
2. Especially if the different user is also Administrator!!!
I have found solution for running a task in SQL Agent - SQL Agent has to work on the same account on which SSIS package was created. But this is crazy when I would like to deploy it to a production server.
Please help.
Przemo
View 1 Replies
View Related
Mar 8, 2006
Hey guys,
I've got a problem here. I need to send the query result to a csv file then transfer the file to a website. I thought this is a good candidate for a SSIS package. The package is ready now but I don't know how can I execute it from within a stored procedure.
I thought sp_OA family of extended procedure would be helpfull. After following steps:
EXEC @hr1 = sp_OACreate 'DTS.Package', @oPKG OUT
EXEC @hr1 = sp_OAMethod @oPKG, 'LoadFromSQLServer("foo", ,, 256, , , , "foo1")', NULL
EXEC @hr1 = sp_OAMethod @oPKG, 'exec'
EXEC @hr1 = sp_OADestroy @oPKG
it tells me command execute successfully. But no package actually gets executed and I can see no results
Thanks
View 1 Replies
View Related
Oct 22, 2007
How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
Thanks
View 14 Replies
View Related
Oct 5, 2007
Hi, here is my problem :
I want to run ssis package in sql server 2005 agent.
i've made a new JOB with 3 steps ( 3 ssis package)
But when i run the job, i see only 2 "actions step" in the windows :
Start job .....
Execute job ....
I would like to see at least the execution status of every ssis package and if it's possible,
the execution of every task ( to see quickly if there's some error and what's wrong)
What's the best solution to doing that
Thank for helping
BG.
View 1 Replies
View Related
