I'm trying to make my SEND MAIL TASK in SSIS dynamic, by retrieving SMTP Server name (amongst other email message information) from a table.
I've got an SP that is getting the information into package variable's, and when I don't try and have a dynamic server name (i.e. I use a specified SMTP server in my SMPT Server connection), then the email get sent off.
I'm trying to use an expression to build alter the send mail to use the server name I have in a user variable.
I've tried using the expression for the property:
SmtpConnection set to: RTRIM( @[User::MailServer])
I also tried without the RTRIM - I only added it because the error messages seem to include a full 'string' length, and there doesn't seem to be a 'varchar' data type for SSIS variables.
so:
a> Is SMTPConnection the property I need to be setting? None of the others seem correct
b> If SMTPConnection IS the property I need, does the value give the SMTP Server Name, or just the Name of the connection from the Connection Manager's?
Thanks
Part-Answer to:
b> The SMPTConnection property sets the name of the CONNECTION to be used. That Connection needs to set the name of the server. So n ow, the question becomes, how do I configure that from SQL (I know how to use package configurations from XML files).
Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
Hello,Does anyone know how I can set SQL Server up so that after it hascompleted a backup sucessfully it will send the completion report toan e-mail address via SMTP.Unfortunatly we cannot install MS OUTLOOK Express or similar.Is this possible?Many thanks in advance,Allan Martin
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I'm having trouble in configuring Yahoo's SMTP for Database Mail. Here is my current settings:
Email Address: xxx@yahoo.com Server Name: smtp.mail.yahoo.com Port Number: 465 This server requires a secure connection (SSL) - check Basic Authentication Username: xxx@yahoo.com Password: xxx
When I tried sending a test email, it didn't work. But when I changed my SMTP to use Gmail, it worked!
Hi all,At this moment I'm trying to get database mail working. According tosome people it should be easy. Well...that is not the case for me.I'm having the following error:The mail could not be sent to the recipients because of the mail serverfailure. (Sending Mail using Account 2 (2006-11-24T08:48:15). ExceptionMessage: Cannot send mails to mail server. (Command not implemented.The server response was: Command not Supported).)SQL Server 2005 is installed on a separate server and the SMTP Serveris Lotus Notes. connecting with port 25.Start and stopping the SQL Server and SQL Server agent i tried already.i tried sysmail_stop_sp and sysmail_start_sp.Sometimes when starting or stopping the Mail with the followingcommands :exec sysmail_stop_spGOexec sysmail_start_spGOI will get the following error:Msg 233, Level 20, State 0, Line 0A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - No process is onthe other end of the pipe.)So any help would be appreciated.Hennie
Does anyone have any step by step instructions for how to send smtp mail from SQL? I guess I can use xp_cmdshell to run a vb script or something but I have no clue besides that as to what's involved.
Has anyone ever set up sql mail through smtp. I am trying to automate my server and not having to much success as i cannot use exchange for company reasons. I understand that i am able to set this up through outlook and not outlook express. this is what i have tried to do: 1. Remove any MAPI application (Full Outlook or Microsoft Messaging from control panel). It is important that there are no mapi profiles on the server. 2. Logon to the SQL server using the SQLService account 3. Check that Outlook Express is the default Mail client (done from IE/tools/Internet Options/Programs) 4. Check that there is a mail account configured, pointing to an SMTP server, say aklexch1 (just put bogus stuff in for the POP server) 5. test that you can send a message (ignoring the receive errors) from Outlook Express to your @advantagegroup.co.nz address
Only after step 5 is working should you start testing from SQL
6. In SQL Mail config you will not see any profiles in the list but just type 'Default' 7. Create an SQL Operator with an @advantagegroup.co.nz address and click the test button
I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService. My main issue is that no mapi profile can be located on the server and sql server agent is recieving login failed attempts when I a attempt to start it! any ideas
------------ Damien Harris at 1/25/01 7:29:49 PM
Can anyone adivise me with setting up mail in SQL 7. Unfortunatly I am unable to use the usual mail client for security reasons, thus I am attempting to use a mail account through express specifying a smtp address. I keep recieving Mapi and logon errors when starting mail and service manager. Can anyone help! thanks
Has anyone got deatils on how to go about setting up sql through an smtp client. I am unable to configure the automation service through outlook express as I understand that it is not supported. I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService (service account) and an exchange account. My main issue is that no mapi profile can be located in SQL mail and sql server agent is recieving login failed attempts when I attempt to start it! Can anyone adivise me with setting up mail in SQL 7
I keep recieving Mapi and logon errors when starting mail and service manager. I have also tried using a internet mail account which has not worked either. I have been told that sql mail should have a default mail client that I have specified as the SQL service account. Any feedback or advise in this area would be extremley helpful as I am stumped at the moment.
Hi, I have RS 2000 running on windows 2003 server. I want user to subscribe to reports and receive reports via email. Initially SMTP was not installed for IIS 6.0, so I installed it and the right way (I had done it on different machine before and was succefull in that) but on this particular machines ...I don't see "Default SMTP Virtual Server" node when I open IIS manager. This is the third day I am working on this issue ..please help me out guys, prashant
I am new to the SSIS package and was trying to figure out how to use SMTP authetication with a 'Send Mail Task' Our company's server requries SMTP authentication for mail. The Send Mail task only allows for Windows authentication.
What can I do to get the SMTP authentication to work for the Send Mail Task? Regards, James Robb
my package requires a send mail task and i must use a secure non-windows smtp server. can someone please tell me how to configure the smtp connection manager so i can do this? thanks.
We have an SSIS job that runs once a day and sends emails. For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
Hello dear i am using windows 2003 server where i have installed smtp server now i want to configure with remote stmp so i can send an email to any domain.
I am running a SSIS package under a trusted account and I am running into a problem when I am executing a email task. The error is an operation timeout which was reported in the log. I am using windows authentication on the connection manager. Other email task configured the exact same way run correctly in the same run. Also when I execute task from BIDS the email is sent. Is there a bug in SSIS which would cause this behavior or some kind of exchange server configuration issue? Any help would be appreciated. Thanks, Greg
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:
I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.
I wish to send e-mail from my SQL Server, however, I do NOT want to use Exchange or MS Mail. I am looking for a very simple SMTP component that I can call from SQL.
Just trying out xp_smtp_sendmail for the first time.I get the error:Error: connecting to server smarthostOK, so I don't have the server parameter for SMTP server set upcorrectly.I don't even know what an SMTP Server is! Is this an e-mail providerthat provides SMTP functionality, or an application I need to install?
Help with query: I currently cannot be alerted by SQL Mail so I would like to take the script that was generated by SQL server and using the store procedure sp_sqlsmtpmail to generate a email using smtp server to alert me. The store procedure does work. I would like to know if this is possible.
Thanks
Lystra
-- Script generated on 1/21/2005 10:04 AM -- By: MAMSIsa -- Server: (local)
IF (EXISTS (SELECT name FROM msdb.dbo.sysalerts WHERE name = N'Demo: Full tempdb')) ---- Delete the alert with the same name. EXECUTE msdb.dbo.sp_delete_alert @name = N'Demo: Full tempdb' BEGIN EXECUTE msdb.dbo.sp_add_alert @name = N'Demo: Full tempdb', @message_id = 9002, @severity = 0, @enabled = 1, @delay_between_responses = 10, @include_event_description_in = 5, @database_name = N'tempdb', @category_name = N'[Uncategorized]'
Then
Exec sp_sqlsmtpmail @vcTo = 'lwilliams@Huc.com', @vcBody ='Check out problem Immediataly.', @vcSubject ='DOCSITE01FDK - Full Tempdb Log'
I am trying to create standard subscriptions using local SMTP server. When i create a subscription with no parameters, the reports and delivered via email. If I try to subscibe to a report with parameters and setting the parameter values , the subscription fails. The Data Source credentials are stored., The same report without parameters is delivered.
Here is the log.
ReportingServicesService!library!10!10/17/2007-12:10:07:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties. ReportingServicesService!emailextension!10!10/17/2007-12:10:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'DS1'. ---> System.InvalidOperationException: ExecuteReader: CommandText property has not been initialized at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.ReportingServices.DataExtensions.SqlCommandWrapperExtension.ExecuteReader(CommandBehavior behavior) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RuntimeDataSetNode.RunDataSetQuery()
Hi, When i try to send an email from SQL 2000 reporting services, i get error "The underlying connection was closed: Unable to connect to the remote server" . In a different environment the same settings is working. The only difference is that in first case, SMTP server and SQL 2000 reporting server are in different domain. But i have tested SMTP server connectivity from the reportserver using DOS command. It works good. Please help me
Hello Everyone, I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'... Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem. I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
I have a scenario, need to create SQL server Tables dynamically.
I Have multiple xml data file on a particular location, and want to load those XML data into sql server tables, but he metadata of each xml data files are not same.
Hence the approach is that,
1. Pick first file from that location 2. Create a table according to that xml data file metada 3. load data on newly created table. 4. Pickup the next xml data files. 5. loop through, till the XML data files are exists on that location.
