Hello,
I am testing my SSIS pakage, but I got a space disk issue (the C disk is over 100 GB):
Error: Date Time
Code: 0xC004704A
Source: xxxxDTS.Pipeline
Description: The buffer manager cannot extend the file "C:DTSxxxF.tmp" to length xxxxxx. There was insufficient disk space.
End Error
Error: Date Time
Code: 0x80070070
Source: xxxxDTS.Pipeline
Description: There is not enough space on the disk.
etc....
How can I solve the problem?
Is there any way to use different path for .tmp file?
I'm trying to save a dts package and it keeps coming back with insufficient disk space. I noiticed that db MSDB was full so I manually increased the size. It was set to manually grow at 1 mb increments. But for some reason it didn't look like it was doing that so I manually increased it. Right now this is about 355 MB free so that should be plenty to save a package. But its still coming back with the same error insufficient disk space to complete operation. Any ideas on why or why it didn't grow on its own? Please help I can't seem to save any packages.
has anyone met with this before?the setting is SQL2K with SP3 on a 2 node active-active W2K3 cluster.on one of the machine, it occasionally prompts for the following error:"The log file for database "tempdb" is full. Back up the transactionlog for the database to free up some log space."the problem is, at the time of error, the tempdb tx log is only 200MBand there are over 50G disk space available.settings of tempdb:-- 10% autogrow, unlimited max size-- auto shrink off-- data file around 1GThanks.
-- Initialize Control Mechanism DECLARE@Drive TINYINT, @SQL VARCHAR(100)
SET@Drive = 97
-- Setup Staging Area DECLARE@Drives TABLE ( Drive CHAR(1), Info VARCHAR(80) )
WHILE @Drive <= 122 BEGIN SET@SQL = 'EXEC XP_CMDSHELL ''fsutil volume diskfree ' + CHAR(@Drive) + ':'''
INSERT@Drives ( Info ) EXEC(@SQL)
UPDATE@Drives SETDrive = CHAR(@Drive) WHEREDrive IS NULL
SET@Drive = @Drive + 1 END
-- Show the expected output SELECTDrive, SUM(CASE WHEN Info LIKE 'Total # of bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS TotalBytes, SUM(CASE WHEN Info LIKE 'Total # of free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS FreeBytes, SUM(CASE WHEN Info LIKE 'Total # of avail free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS AvailFreeBytes FROM( SELECTDrive, Info FROM@Drives WHEREInfo LIKE 'Total # of %' ) AS d GROUP BYDrive ORDER BYDrive
How do i see what SSIS i have? Threads seem to point that SSIS needs to be installed to fix the following error:
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Error)
Messages
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Destination - DataID" (34). (SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (55). (SQL Server Import and Export Wizard)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Success)
- Copying to `DataID` (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
But when i choose Help-> About i get Microsoft SQL Server Management Studio 9.00.1399.00 Microsoft Analysis Services Client Tools 2005.090.1399.00 Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158) Microsoft MSXML 2.6 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 7.0.5730.11 Microsoft .NET Framework 2.0.50727.832 Operating System 5.1.2600
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio) ------------------------------ Program Location: at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter) at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream) at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value) at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize() at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful) at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush() at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie) =================================== Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS) ------------------------------ Program Location: at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events) at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
while executing the package following error message is received as :
Error: 2006-07-28 15:12:36.60 Code: 0xC00470FE Source: Data Flow Task DTS.Pipeline Description: The product level is insufficient for component "Data Conversion" (202). End Error
and at the end as :
DTExec: The package execution returned DTSER_FAILURE (1).
Same error appers while executed from Integration Services - ->stored packages - - >name of the package -> mouse right button, run package.
But the same executes perfectly from visual studio, where it is developed.
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Msg 234, Level 16, State 2 There is insufficient result space to convert MONEY value to CHAR.
hi, I have one procedure that insert data into a table, I called the procedure 3 times ,and run it in one step, then got the above erorr message. what can I do to avoid this error message? and why I am getting it... thanks for your help regards
Hi, I get folllwing error while SSIS package is executing and uploading Data from Flat Files to SQL Server 2005. This Error goes away when I change my SSIS Package Connection Manager to read UNICODE data files. Is there any smart way to figure out which flat files have UniCode Data in the and which is not a Unicode data file.
Thanks, Vinod
Information: 0x402090DC at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has started. Information: 0x4004300C at Upload EP Data, DTS.Pipeline: Execute phase is beginning. Error: 0xC020209C at Upload EP Data, DAT File Reader [1]: The column data for column "SYSTEM_LOCKED" overflowed the disk I/O buffer. Error: 0xC0202091 at Upload EP Data, DAT File Reader [1]: An error occurred while skipping data rows. Error: 0xC0047038 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DAT File Reader" (1) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047039 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. Information: 0x40043008 at Upload EP Data, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has ended.
Hello I need to setup a compaq sever with 300 MB database, and will be adding around 600 records on a daily basis. Can someone help with how much disk space i should have on sqlserver, providing i have c: and d: setup.
I have a server and it has C: D: F: I: Drives and all the system files are on C:Drive and and all the .MDF's and .LDF's(model,temp,master) are on the F: Drive and now I am running out of space on both(C: and F: Drives)
1. Can we add space to the C: and F: drives on the fly?. 2. Can I move the System databases ( MDF's and LDF's to some other drive)and if so, how do I do it?( Moving the databases ) and this is on the production database so when I have to do this.Will there be any impact.
I noticed something strange today. I was running a query using query analyzer on a large database (8.8 million records) and the disk space on the c: drive was dropping and eventually went to 0. Availalbe space on the c: drive is 10GB. The query did complete. SQL server and all the databases are on the d: drive. After closing the query results in query analyzer the disk space returned. Is this a concern and is there a way to change it to use the d: for whatever it is doing?
This is my first attempt using SQL 2000 and DTS. I am importing an Access database using the DTS wizard. The process fails with a "Not enough space on temporary disk" error. There is definitely enough space on the physical disk. I don't have any limits on any folder sizes either. What "disk" is the error talking about, and how do I give it enough space. The database is relatively small, about 10MB. I believe the database was created using Access 97. Please help.
We recently moved from v6.5 to v7.0. Now I have the databases and logs set to "autogrow". How can I monitor the disk space to ensure I do not run out of room (or is that preset as to how large it can grow ?). Can't find anything in the books online. Do I do this through the NT admin tool or through the SQL*Server Enterprise Manager and more importantly - how ??? Thanks so much for any help... Nancy
Our database -SQL Server 7.0 sp1 (NT 4.0 sp5)- is growing at a very fast rate despite the fact that we are deleting old record. It doesn't seem to be recovering disk space for the deleted records. Please let me know if there is a specific setting that can help us recover disk space. )
Hi, I'm new to these forums (and to SQL Server), so please be gentle with me.
I am developing a process to obtain information on all our remote servers/databases, and store it in a single local database. I'm after things like db size, last backup date, free drive space etc...the usual weekly statistics.
I've linked the remote servers to my local one, and have written a few simple procedures (which exist on the local server) to grab backup and file size information from the remote tables. The output is stored locally in tables which we can then query as necessary.
I am having difficulty obtaining the free drive space details. I'm using :- 'exec <remote_server>.master.dbo.xp_fixeddrives' to get the info, but I cannot store the output in a table on the local server. (remote_server_name, date, drive_letter, space_mb)
I wish to avoid creating any objects on the remote servers if at all possible. I really want to pass the remote server name into the procedure, and the output to be inserted into the table.
I have 600 instances on my network .... I need to monitor the Disk Space ... how should I do that I mean the best way for this would be ???
By Disk Space I mean the SQL Instance should atleat have 10% of free disk space ... If it is less , maybe an alert can be sent or something of that sort .
Now it would be a pain configuring alerts on each machine.
I think i know the answer to this one already, but would like to check before going back to my management.
Background. In the past 2 weeks, a number of our databases have shot up in size, and are now at 100% utilisation of allocated disk space. My management have asked me to look into what is causing these to fill up so quickly.
Unfortunatly there were no snap shots or information relating to the databases / tables so i can not determine which tables have grown and are causing the problems.
I have also looked through the sql logs and the event viewer logs to see if there is anything out of the ordinary, but again apart from log / database backups there is nothing of note in there.
I am going to be implementing a solution that I got off another thread which will give me some database / table history to help me in the future, but for now is there anything else i can do? or is it a case of me getting back to the application guys and getting them to reduce data (as there is no more disk space to give them).
Any thoughts or advice you can give me would be greatfully received.
Okay, so i have a Dual Xeon SQL2k5 Server set up. it's got 4 10k RPM Raptor Drivers (160gb) on it all stripped together. my question is this, i was just doing all kinds of index tuning, and my server didnt have enough disk space to create 2two of the recommended adjustments. i'm curious, if i should just have those two indexes stored on the 1TB Backup array i have? (two 500gb 7200RPM drives)
or should i backup the database, and expand the Raptor Array and then restore the database and create the indexes?
i'm not really worried about down time as long as it doesnt exceed 2 days.
I first ran indexdefrag on a table with 1.5 billion rows. logical fragmentation was at 95%. logical frag went down to 3% with no real effect on disk.
DBCC reindex had previously been bombing undetected.
Now I've run a reindex on this table: Reindex Job with Fillfactor =100 Ran in 3:05 Free Disk went from ~150GB before operation to 49GB File4 went from 347GB to 504GB
Why has so much free disk been consumed by this operation and not released ??????????
one user database ldf file is growing like it reached 50GB and total D: drive space is 70GB. No SAN drives for D:. I tried to shrink the file but it not shrinking. Even I tried take to Tlog backup but it is throwing the below error 'not enough disk space'
This is production server. Please let me know how to resolve this issue?
one user database ldf file is growing like it reached 50GB and total D: drive space is 70GB. No SAN drives for D:. I tried to shrink the file but it not shrinking. Even I tried take to Tlog backup but it is throwing the below error 'not enough disk space'
This is production server. Please let me know how to resolve this issue?
