Hi!
When I add a Data Flow Task to a package, save it and then close. When I open it again, I get 3 errors and the detail of the Data Flow Task is empty.
I had try to uninstall and install my SQL Server 2005, but the problem continues.
Can some one help me on this?
Sérgio Cardoso
I get the following error when trying to import (have tried flat files, Excel & Access). I've searched but have not found a resolution. Any help is appreciated.
Jeff
Validating (Error)
Messages
Error 0xc00470b6: Data Flow Task: The LocaleID 0 is not installed on this system.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Source - Test1" (1)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I was working all day making changes to my 3MB package. I was adding a large number of transforms that were copied-and-pasted from elsewhere in the same data flow task.
All was going well. I even took the time to have SSIS lay out the task again (1/2 hour). Suddenly I started receiving some strange errors:
After the layout, I noticed two stray components 'way off in the upper right corner. I found that one of them had a duplicate name to a component which had been added hours ago. Even after deleting it, I got "duplicate name" errors.
I copied three components in one selection, and when I tried to paste them, got the error "can't initialize component on paste". I tried them one at a time, but got the same error.
I got errors about COM failures due to marshalling to another thread
I then exited Visual Studio and started it again. To my great surprise, the data flow task I was working on was still there, but was completely empty.
Comparing what I'm left with to my last version in source control, I find that the entire pipeline element is missing from the DTS: ObjectData element!
I'm developing a real love/hate relationship with SSIS. It varies from one day to the next. Guess what kind of day this is!
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Hi, there,
I am having some problems with the loading of tab delimited text file (source) to a SQL Server table (destination) using the SSIS data flow task. Package has been executed successfully with no error msg. The number of rows in the text file also matches the number of rows in the SQL table. But, when I check the content of the table, I noticed some of the columns contain NULL which supposed to have value. This happens not to all the rows but only to some rows. I did some testing by removing some rows from the beginning, middle and end of the text file and re-run the package but the result is quite inconsistent. Sometimes, the field got filled, but sometimes, it just contains NULL where it supposed to have value.
What will be the possible causes to this?
Thanks in advance.
Regards,
Yong Hwee
Hi,
I am experiencing an error where the ssis data flow task would freeze and stop data export from a oledb source to a text file. It doesn't generate any errors the ssis package would just hang. This only happens when I run it in 64 bit mode. When I change the mode to 32 bit the ssis never freezes and runs fine. Has anyone experience this? Is there a fix so I can run my jobs in 64 bit mode?
Thanks,
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a package that loads staging tables from an Oracle source DB. In the data flow tab I have 30+ read table/write table task combinations. When I run the package 3-4 of the read/write combos execute at a time. What I'm trying to control is the priority order of the combo execution. My goal is to minimize to total load time by having the larger table transfers run first and the smaller table transfers fill in until they are all complete. Currently, the largest table (16 million) transfers last (because it was the last combo that I created?).
Thanks,
Dave
I am creating a staging database in which I am loading required tables from 2 different sources.
I have 30 different tables to load from source 1 and 10 different tables from source 2.
This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task
has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data.
So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination.
I wanted to find out if this is the efficient way to do, or if there is any other way to do this.
And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps
as for Source 1 tables.
Please advice.
Thanks,
I have just installed Service Pack 2 on my SQL 2005 Standard Edition.
However, now all my SSIS packages will not allow me to open my Data FLow Tasks. I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Cannot show the editor for this task.
------------------------------
ADDITIONAL INFORMATION:
The task returned an unsupported control editor type. (Microsoft.DataTransformationServices.Design)
If I try to create a new Data Flow task I get:
TITLE: Microsoft Visual Studio
------------------------------
Failed to create the task.
------------------------------
ADDITIONAL INFORMATION:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
I have tried to install the latest hotfixes after this but they had no effect.
Can anybody help me???? Please?
I need to extract data to send to an external agency in their supplied format. The data is normalised in our system in a one to many relationship. The external agency needs it denormalised.
In our system, the parent p has p_id, p_attribute_1, p_attribute_2, p_attribute_3 and the child has c_id, c_attribute_a, c_attribute_b, c_parent_id_fk
The external agency can only use a delimited file looking like
p_id, p_attribute_1, p_attribute_2, p_attribute_3, c1_attribute_a, c1_attribute_b, c2_attribute_a, c2_attribute_b, ...., cn_attribute_a, cn_attribute_b
where n is the number of children a parent may have. Each parent can have 0 or more children - typically between 1 and 20.
How can I achieve this using SSIS? In the past I have used custom built VB apps with the ADO SHAPE command but this is not ideal as I have to rebuild each time to alter the selection criteria and and VB is not a good SQL tool.
Hi all,
I met a problem when trying to pass values to a SQL statement through parameters. It's a data flow task. I used the OLE DB connection. My statement is like the statement below(the real statement is little complex):
Select * from myTable where mydate>? and mydate<?
I used the "set query parameter" dialogbox to bulid two parameters varStartTime and varEndTime, the values for the two parameters were set to "1/1/2005" and "12/30/2006" respectively. But when I click the "Parse query" button, I got errors
Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command.
I have referred to the posts, but the problem still exists. Any help will be highly appreciated. Thanks a lot!
Hi All,
I have a requirement here to import data from XML file to SQL Database. The XML schema contains of various elements and one of the element is recursive ie. Parameter node contains parameter node within it and it can have n number of iterations. I have given the sample schema below:
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
<xs:element minOccurs="0" name="Parameter">
<xs:complexType>
<xs: sequence>
<xs:element minOccurs="0" name="ID" type="xs: string" />
<xs:element minOccurs="0" name="Description" type="xs: string" />
<xs:element minOccurs="0" name="Type" type="xs: string" />
</xs: sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Parameter">
...............
</xs: sequence>
</xs:complexType>
</xs:element>
</xs: sequence>
</xs:complexType>
</xs:element>
But all the nodes contain the data which has to be imported to a single table dbo.Parameters. I cannot use Union ALL since i dont know how many iterations I will have in the file. Is there any way to do this operation in Data Flow Task using XML Source? Can anyone help me on this?
Thanks,
Dhileep
I have an SSIS Package which is designed to import log files. Basically, it loops through a directory, parses text from the log files, and dumps it to the database. The issue I'm having is not with the package reading the files, but when it attempts to write the information to the db. What I'm seeing is that it will hit a file, read 3000 some lines, convert them (using the Data Conversion component), and then "hang" when it tries to write it to the db.
I've run the SQL Server Profiler, and had originally thought that the issue had to do with the collation. I was seeing every char column with the word "collate" next to it. On the other hand, while looking at the Windows performance monitor, I see that the disk queue is maxed at 100% for about a minute after importing just one log file.
I'm not sure if this is due to the size of the db, and having to update a clustered index, or not.
The machine where this is all taking place has 2 arrays- both RAID 10. Each array is 600 GB, and consists of 8 disks. The SSIS package is being executed locally using BIDS.
Your help is appreciated!
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
Hi all, I am getting the following when trying to import text coloums from execl to SQL server 2005. Any ideas?
Error at Data Flow Task [Destination] Coloums "blar" and "Blar_name" cannot convert between unicode and non-unicode sting types.
Any help would be great.
Thanks
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
Hi,
I have SQL Server 2005 Express edition on my machine. On an SSIS project in BIDS, when i drag a "Data Flow Task" to the package it returns the following error:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
Does this has anything to do with the fact that i don't have SSIS installed on my machine?
I thought that SSIS was only needed (on my machine) for the runtime, just to run the packages. To create and edit the pachages i need to install SSIS on my machine too? this doesn't makes sense, maybe it's another problem.
Can anyone help me on this?
Thank you,
Rafael Augusto
I am having problems with the Data Flow task. It does not even show up in the list of items to drop into the SSIS project.
If I go to the Data Flow tab and hit create, I get the follow error. I have tried repairing and reinstalling, but nothing seems to clear up the error. Without rebuilding my machine, is there anyone who knows how to get the Data Flow Task reinstalled properly?
Thanks
Wayne
TITLE: Microsoft Visual Studio------------------------------Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer. ------------------------------ADDITIONAL INFORMATION:TaskHost "{C3BF9DC1-4715-4694-936F-D3CFDA9E42C5}"' is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskHostNotInstalled&LinkId=20476------------------------------BUTTONS:OK------------------------------
HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT´S THE THING: I´M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT. I´VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.
Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.
Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.
Task failed: Extrae SAZ_GranoO_New
Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.
THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS???
PLASE SOMEONE !!!!
THANKS!!!!!!!
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
Hi all,
We are running SQL Server 2005 Standard edition on a Vista Business machine. Whenever we try to use DTS to import or export data we get this message:
The SSIS Data Flow Task could not be created. Verify that DTSPipeline.dll is available and registered.
Of course we have explicitly registered this dll and others.
Also we reinstalled SQL Server (and did it again. And did it again).
And we did the same for Visual Studio Standard (and again).
Any ideas in this elaborate group?
Thanks,
Tjerk
I am trying to transfer data from one table to the other using a Data Flow Task of SSIS (SQL Server Integration Services)
I am using an OLE DB Source and an OLE DB Destination.
Source Table TABLE1
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), null
Destination Table TABLE2
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), not null
There are 10 rows in TABLE1 of which 2 have null value in EmployeeName column.
If I try to populate all TABLE1 row values into TABLE2 the data flow will fail as TABLE2.EmployeeName will not accept null value.
So I have inserted a FlatFileDestination into the DataFlow and the OLE DB Destination ErrorOutput is set as input to the FlatFile. In the OLE DB Destination Editor the ErrorOutput€™s error property is set to Redirect Row.
When I do this the 8 correct data from TABLE1 will be inserted into TABLE2 and the two rows with null value will be inserted into the FlatFile.
My requirement is this:
I don€™t want any data to be inserted into TABLE2 but I want the two erroneous records to be written into the FlatFile.
Please suggest.
I am trying to execute a Data Flow Task. There is only one task in the data flow task so far, and that is a Flat File Source task. I also set up a Connection Manager for the file, myfile.txt.
When I try to run the Data Flow Task, I get these errors:
The first problem seems to be with the connection, on the first line. What connection element is missing here? The others seem to be truncation errors. I don't know why that is. I changed the column sizes to match the sizes of database columns. They ARE surrounded by double-quotes, but I have {"} specified as a Text Qualifier in my Connection Manager.
Please, need help!
Error: 0xC001000E at : The connection "{F6513CB9-29E2-4D88-A86B-0EF9DFABE9D6}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2168]: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at Data Flow Task, Flat File Source [2168]: The "output column "Column 0" (2185)" failed because truncation occurred, and the truncation row disposition on "output column "Column 0" (2185)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2168]: An error occurred while processing file "D:myfile.txt" on data row 1.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2168) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
I am using the Visual Studio for Integration Services. and creating a database.I am trying to download data from a Cube table (SALES_HISTORY), using a Microsoft OLE DB provider for Analsysis services 10.0. in this table, it has visible 2 fields (SALE_TRANSACTION_ID) and (TRANSACTION DATE) but have many hidden fields, such CUSTOMER, PART_NUMBER, etc . when I try to create a query in the OLE DB source editor, I can see all the fields, and be able to create the SQL command.
However when I want to preview it or parse the query, I have the following message: 
Exception from HRESULT: 0x0C0202009 error at data flow task [OLE DB Source [1]]: SSIS Error code DTS_E_OLEDBERROR. an OLE DB error has occurred. Error Code 0x80004005.
an OLE DB record is available. Source: " Microsoft OLE DB Provider for Analysis Services 2008". Hresult:0x80004005 description: Query (1,15) error from the SQL query module the 'Customer' column cannot be found in the 'SALES_HISTORY' table...how to extract the data from the visible and also hidden fields (in excel, are called properties).
Hi Guys,
I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.
Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.
I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.
Any suggestions how I can get it to load the full data?
Thanks
Hi All,
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
The SQL datable fileds are
i) ID - Int
ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)
While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
Please do help me out.
thanks
Sanra
Dear all,
I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database.
When I execute it, it prompts the following error message and 1 warning
The excel file has three colums, Week, Item and Value
Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E37 Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0
Warning
Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection. The column "TCH_AVAIL" needs to be added to the external metadata column collection. The column "PDROP" needs to be added to the external metadata column collection. The column "P_HR" needs to be added to the external metadata column collection. The column "SFAIL" needs to be added to the external metadata column collection. The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection. The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0
Could someone give me a hand here.
Regards,
Ronald
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
View 3 Replies View RelatedHi, this is my first post and I'm relatively new to SSIS so please go easy on me.
Without going into too much detail about it, I've set up a simple SSIS package which does this in a nutshell:
Foreach loop picks up all *.xls files in a given folder
1 - Puts the name of the current spreadsheet into a variable
2 - File System Task copies the current spreadsheet ("abc.xls") to a file called "work.xls"
3 - Data Flow task performs data extraction on "work.xls" and puts it into a SQL server database
4 - File System Task moves "abc.xls" into a "success" folder
Continues with loop - move onto next spreadsheet
This works fine, so long as the spreadsheets all have the same number of columns.
As soon as one of them has a column missing (believe me, this will happen - we're dealing with users here) the package falls over at step 3.
When the package comes across an erroneous spreadsheet, what I'd like to do is move the offending file to a failure folder (making step 4 either a success or failure file move) and carry on with the next one.
I know that you can have an error path (the red line) from any step within the dataflow task, but this doesn't help me because the error lies in the structure of the spreadsheet and not the contents.
I've already come up with a work around whereby each file is moved into the failures folder just after step 2, then moved from the failures folder into the success folder at step 4.
This almost gives me what I want, although of course the package still falls over whenever it encounters a dodgy looking spreadsheet.
Is there any way that I can get the package to do what I'm after?
Many thanks,
Simon
I am having a problem getting error rows to redirect between an OLE DB Source and an OLE DB Destination when using transactions. Each time I turn on the transaction control I get an error stating:
"[OLE DB Destination [48]] Error: The input "OLE DB Destination Input" (61) cannot be set to redirect on error using a connection in a transaction."
I get the above Error when using MSDTC. I have the data flow inside of a Sequence Container with the transaction option set to REQUIRED and the Isolation Level set to Serializable. I have tried all the Isolation levels.
I have the error rows piped off to a seperate OLE DB Destination. I have also tried using native SQL transactions with Execute SQL tasks to BEGIN, COMMIT or ROLLBACK the transaction. This does not work either. It looks like it works properly when the data flow is successful but using profiler I can see SSIS opens up a seperate process for the BEGIN and then another one with the Data Flow task. When I intentionally fail the Data Flow the Rollback always fails. I made sure I had RetainSameConnection turned on for the Connection I was using.
I am speculating that the Data Flow does not know what to Rollback the actual rows that succeeded or the error rows that are getting piped off.
I am fairly stumped on this one so any help is appreciated.
Thanks
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.