I'm getting an error message (see below ) using the SSIS Import and Export Wizard to read in IBM DB2 databases on a XP 64 machine. I'm trying to import the DB2 (8.2.8) tables from IBM/AIX to SQL Server 2005. I have the IBM Client V8 with Fixpak 14 installed on the computer.
Using IBM OLE DB Provider for DB2 ( testing connection is fine ) for Data Source
Using Microsoft OLE DB Provider for SQL Server for Destination to SQL 2005 database (also tried SQL native Client )
During the next screen "Copy data from one or more tables or views" I get the following error and no tables show up.
CLI0102E Invalid Conversion. SQLSTATE=07006
Additional Information
CLI0102E Invalid Conversion. SQLSTATE=07006 ( IBM OLE DB Provider for DB2)
I've checked on BLOBs and CLOBs in the tables on the DB2 side and none of the tables I have access to have them (but there are tables with BLOBs and CLOBs in them). I haven't checked on decimal conversion but I've seen DB2 Decimal (30,15) columns in some tables.
If someone could tell me the steps and tables that the Wizard uses to build the table list from, I'll go into DB2 Command Center and run a few queries.
I've also tried the MS OLE DB for DB2 Provider but I get an error message on the authentication method not being supported.
I need to re-write some SQL 2000 DTS packages in SSIS to pull data from our db2 system into SQL. I would like to use Microsoft's DB2 OLE DB driver. I'm new to SSIS and the db2 provider, so it may just simply be that I'm setting things up incorrectly.
What I've done: - created the udl via the Data Access Tool that comes as part of the DB2 provider - connection tests successfully - created the data source in the SSIS package explorer - connection tests successfully - added a connection in the connection manager in the SSIS package - connection tests successfully
When I try to set up a data flow, I pull in an ODBC source and edit the source to use the db2 connection. I can get so far as to select the desired table from the drop-down list and then when I try to view columns or just click the okay button, receive the following error :
Error at Package [Connection manager "UDLFilename.catalog.username"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80070057. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80070057 Description: "The parameter is incorrect.".
Error at Data Flow Task [OLE DB Souce [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ULDFilename.catalog.username" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Additional information: Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
I've been working on this for a week and just can't seem to make any headway or find any existing help on the internet. Can anyone give me any idea what parameter the error is referring to or any clue as to what to try next? I only have two weeks left before we implement... Thanks much for your help!!!! Laura
Hi. I need to import excel file in database. i first need to do an unpivot task. the column names are dates and SSIS seems to be unable to pick up the column name as it is replaced by F2 F3 F4etc Can you advise of a solution. thanks ken
Hi, in SSIS I read data from a DB2 database on AS400 using the Client Access ODBC Driver for DB2 from IBM and write it to a SQL Server database. Since it does not work using the odbc driver as data source directly, I use a data reader component with .net providersodbc. Some special characters were not translated correctly when read from DB2. They show up as ? in the SQL Server target table.
I tried to change the client locale in the ODBC connection properties but it did not help me. I tried changing all other settings in odbc but it still does not work.
In dts I could source all the data without this problems and good speed using the same nodbc driver.
The OLEDB Providers delivered with SSIS do not work in SSIS or I am too stupid to configure them correctly. They are even too slow as I explained above.
I cannot use the MS OLEDB Provider for DB2, because it works only in Enterprize Edition and we only have the Standard Edition.
Thus, only using Client Access ODBC Driver for DB2 with net providersodbc (as bridge) is performant enough and works on Itanium. But how to work around the problem with the special characters?
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below. [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
I have a SSIS package running well in production however sometimes the package will fail when the excel file contains more than 25000+ rows.
The SSIS package is run by SQL Server Agent and is set to run in 32bit mode.
I checked the data by loading in batches and all data loaded successfully. But the funny thing is when I run the same package on my local development PC using BIDS and the same data file. The package loads all 25000+ rows successfully.
Is there some setting that is preventing all rows loading in the server environment.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.51650
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.50938
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
In MS Excel, the ability exists to run a "web query." This functionis accessed via the data menu's import external data option. The webquery wizard accepts a URL address, and then is able to import thedata from that address into an excel worksheet.What I would like to do is use SSIS to import data from the same website. In other words, I now use Excel's web query functionality toimport data from a website with a url of xyz.asp. I save the excelworkbook, and then run a DTS package to import the data into SQLServer. I would like to entirely bypass Excel, instead of using it asan intermediary to bring data from the asp site into SQL Server.However, I can't figure out how to set up the connection from SQLServer. I am using SQL Server 2005, SSIS. Is there a way to haveSSIS open the asp website, extract the data and import it into a SQLServer table?For the record, this is not XML data.Thanks.
I am trying to import either .csv or excel files using the SSIS import/export tool in Visual Studio and/or managment studio. the data does import in but I am loosing some data in the files, most often date fields.
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
I need to import data into my SQL Server 2005 from an E-mail datasource. It means that when a mail is send to a particular address I must retrieve the mail content or the attached file (in XML) and then I must import these data in my SQL Server 2005.
I am new in SSIS and I don't know if I can perform the import task with SSIS (with a POP3 or IMAP connector) or only with SQL Server 2005 (stored procedures) or can I manage it with C# .Net.
An excel spreadsheet has to be open on Machine B on the network to pull data from a third party tool. I have to refresh several columns in this spreadsheet every minute with new data. Every time there is a new data into the columns i.e. columns 7 and 10, the spreadsheet pulls data from the third party tool automatically and populates other columns i.e. columns 12-15. Then I will have to retrieve the new data from the spreadsheet into sql server 2005.
So first I wrote a query to use to populate the spreadsheet each time with the result using Import Wizard. It gives an error: 0xc0202009 And I am not sure if my approach for this project is correct?
Im trying to create a DTS package to import an Excel spreadsheet in to SQL Server 2005 and them Export to a text file. I have successfully imported the data using the import/export wizard, but I am unsure how to add the step that exports the data into a text file. Any ideas or links to a resource that may help me?
I am new to SQL Server and am trying to import rows from Excel using SSIS and am getting the following error.
Does anyone have any ideas on how to resolve??
SSIS package "Package.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Warning: 0x80047076 at Data Flow Task, DTS.Pipeline: The output column "SupplierID" (161) on output "Excel Source Output" (9) and component "Excel Source" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Information: 0x402090DF at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has started. Error: 0xC0202009 at Data Flow Task, OLE DB Destination [583]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert the value NULL into column 'SupplierID', table 'Northwind.dbo.Suppliers'; column does not allow nulls. INSERT fails.". Information: 0x402090E0 at Data Flow Task, OLE DB Destination [583]: The final commit for the data insertion has ended. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (583) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (583)" wrote 1 rows. Task failed: Data Flow Task Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "Package.dtsx" finished: Failure.
I need to import data from another server using Express edition every minute. So I ran the import wizard, and I saved the packaged on the hard drive. Then when I try to make a new job and new schedule for scheduling, I can't seem to find SQL server integration service option for the Type.
does anybody have any idea why I can't see SSIS there or had the same problem?? Or is there another way of importing data every minuite other than this?
I created a package using the import utility and have it opened in Business Intelligence Development Studio. Can someone explain to me how I can run this import from here?
In SQL Server 2000 DTS there is an Extended Connection properties window that you can set the IMEX property for importing Excel spreadsheets into a SQL Server table. Does anyone know where this is in SQL Server 2005 SSIS?
An excel spreadsheet has to be open on Machine B on the network to pull data from a third party tool. I have to refresh several columns in this spreadsheet every minute with new data. Every time there is a new data into the columns i.e. columns 7 and 10, the spreadsheet pulls data from the third party tool automatically and populates other columns i.e. columns 12-15. Then I will have to retrieve the new data from the spreadsheet into sql server 2005. So first I wrote a query to use to populate the spreadsheet each time with the result using Import Wizard. It gives an error: 0xc0202009 And I am not sure if my approach for this project is correct? What do you think? Thanks
I have Sql Server 2005 Developer Edition and Sql Server Management Studio.I'm trying to import data but there are no options available under "Projects" in SSMS.Do I need to download an update or anything to use this functionality? Thanks
have tried to import data from a big (257Mb, I has about 1.000.000) flat file into a table, inside SSIS. The process doesn’t work correctly. It stops in the same register (about 179.000). I have reviewed the process and have opened the file making it shorter (about 150.000 lines, including the line that before seems to break the process), and it works. Making the file longer it breaks the process again.
The error showed by the program:
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2820]: Data conversion failed. The data conversion for column "debe" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Flat File Source [2820]: The "output column "debe" (4066)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "debe" (4066)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2820]: An error occurred while processing file "Z:PROYECTOS ITSoluciones de negocioProyectosSANDOProyecto 5. CodificaciónETLcapun00108.unl" on data row 36804.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2820) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Anybody knows what could be happening?
Any help would be very appreciated
Thanks
PD: I mean that it´s not a date format problem (I have reviewed some post talking about it)
I am trying to import a flat file into SQL Server 2005 using SSIS. I have never used it before and I am getting confused by the error I am receiving.
I have a link to a flat file, that gets sent through a Derived Column flow where dates in YYYYMMDD are changed to MM/DD/YYYY format. Then the string MM/DD/YYYY is converted to a date in a Data Conversion flow. And finally the data is put into a SQL Server table (currently with no rows).
The problem I am having is with a text field with the email address in it. The error I am getting is:
[Import Allstate Auto Club [1]] Error: Data conversion failed. The data conversion for column "email_source" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The problem is I can't see where in the flow the problem is. The field length is 20 wherever I look and the codepage is 1252 wherever I look. Does anyone have an insight? Keep in mind, I have never used SSIS before and I consider myself an amateur with SQL Server. It could easily be a data type conflict or something easy. Any help will be appreciated.
I am new to SQL Server 2005. I have installed Developer edition. I want to transfer data through DTS which is now SSIS - Sql Server Integration Service I believe.
One question though how do I access SSIS, I am doing normal imports and exports using the wizards. Is there any other interface to access the SSIS??
Hi all,New to SQL Server - trying to create an SSIS package that will look forand import a series of Visual Foxpro tables (.DBFs) when they appear ina folder.The tables are/can be all different fields, field widths, etc. Withquite a bit of overlap though.The end result should be table "ABC.DBF" is pulled into SQL Server astable "ABC"Using: SQL Server 2005 Enterprise, SSIS, *latest* version of VFPOLEDBdownloaded from MSI have set up a package and tested it with several different tables andit works great - but I have to redo the data source and destinationeach time...I need to get this to be a somewhat automated process, pulling in all..DBFs no matter what they contain.Can I do this with SSIS alone (and variable substitution) or do I needto write a bunch of code...Thanks very much for your time and thoughts...
I have a fixed width flat file I'm trying to insert into an SQL 2005 table using SSIS -- it's a recurring task. One of the columns in the flat file has to go to a column of type Numeric. No matter what I try : a data conversion, defining the field as DT_NUMERIC in the connection,... I always get "The conversion returned status value 2 and status text :The value could not be converted because of a potential loss of data". It is driving me bonkers, up to the point that I find myself wishing for the 'good old' DTS days of SQL 2000. And I dread to think what will happen when I try to port some serious, much more complex DTS packages on my SQL 2000 to SQL 2005.
The data in question represents longitudes and latitudes so quite often there is a leading white space in the data : ex. : " 95.15". Surely that cannot be the cause ?
I've spent hours doing the RTFM-thing and searching the newsgroups, fora...you name it. Apart from ending up running in circles in the MS documentation, the only thing I've really learned so far is that I'm aparently not the only one driven to dispair by the new SSIS thing.
I can think of a number of ways to hack my way around this thing, but that's not the kind of 'progress' I had in mind when I started the move to SQL 2005.
HI I'm still in the middle of this 2000 to 2005 64 bit migration!! I have managed to create an oledb connection to my informix db. Within the data flow I wanted to create a simple data pump from my infdormix db to S2K5 db.
Now in the OLEDB source I have done a select froma table to which I can view. I also set the always use default code page to true.
On the error box I get
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Error 1 Validation error. Reason code: OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Cerptransfer.dtsx 0 0
Also when I try to execute it I get
Package Validation Error ------------------------------ ADDITIONAL INFORMATION: Error at Reason code [OLE DB Source [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Error at Reason code [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. Error at Reason code [DTS.Pipeline]: One or more component failed validation. Error at Reason code: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration)
I'd like to import a big table (about 13 millions rows) from oracle to sql server 2005.
2 ways are possible: SiSS and Import Wizard.
I'd prefere to use SSiS, but I'm unable to pass data from oracle because, for some strange reason, debugging the package it hangs on the origin block (painting it red) altought another identical package wit another table works perfectly (and that's another strange question...). Also, SiSS forces me to create a convert block to cast from unicode to ansi
Using Import Wizard in sql2005 instead, the package works perfectly and, importing it in SiSS, it also don't contains the convert block...
I want to start the SSIS wizard to import data from a flat file, but I right click the DB > select Task and the Import and Export options are not there. Is there something I have to enable before the options show up
