SSIS Job Cannot Find File....
Jan 31, 2006
I'm getting an error when running my SSIS package in a SQLAgent job....
Message
Executed as user: DOITLHHQSQLT01SYSTEM. The process could not be created for step 1 of job 0x35D6B42101FB6646B20036599D407110 (reason: The system cannot find the file specified). The step failed.
This is the command line executing the SSIS package....
/SQL "ES PackagesES DEDUCTIONS" /SERVER DOITLHHQSQLT01 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";DestinationConnectionOLEDB
I'm assuming the file it cannot find is the SSIS package..."ES PackagesES DEDUCTIONS".
The step is running under the SQL Agent Service Account.
Anyone have any hints for me? The file is there when I look in integration services.
PS. I looked at the Configuration Manager and Integration Services in running under the Network Service account while the SQL Agent service is running under the Local System account. Could this make a difference? Should all the services be running under the same account? (I don't install this stuff so excuse my ignorance.)
View 3 Replies
ADVERTISEMENT
Apr 14, 2014
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
View 4 Replies
View Related
Jan 31, 2007
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
View 1 Replies
View Related
Jun 7, 2007
Hey all
I tried to use the SQL Server 2005 setup file to try and locate the Integrated Services but it's not on there. Where else can I find SSIS?? Help!!!
Many thanks,
Rupa
View 9 Replies
View Related
May 21, 2006
I have VS2005 and have been using SQL 2000. I installed SQL 2005 Developer but I can't find SSIS anywhere. It is hard to start even the first tutorial if I can't find the program. Was it supposed to be installed with 2005 Developer? Help!
Thanks in advance.
Chuck
View 3 Replies
View Related
Feb 26, 2007
SQL 2005 running on 2003 Server:
When trying to connect to Integration Services from Management Studio, I retrieve the following error:
***
TITLE: Connect to Server
------------------------------
Cannot connect to DAVINCI.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "DAVINCI" failed:
The specified service does not exist as an installed service.
***
I see a ton of people having the same problem, but as for now I still haven't found a solution.
We have SP1 installed and have installed cumulative fix from http://support.microsoft.com/kb/918644, and been by the DCOM settings regarding local/remote access.
The SSIS service is not running. It is not shown in the list of services.
Any ideas before a total re-install?
Regards /Snedker
View 3 Replies
View Related
Mar 15, 2007
Sorry to ask such a basic question on this forum.
I have installed SQL Server 2005 and the SSIS service is running. However I cannot find the package to use it.
I am evaluating SQL Server 2005 so I currently have a trial copy - is this the problem? I want to recommend a purchase but I do not want to end up with the same issue with the organisation having bought a copy.
View 4 Replies
View Related
Jul 5, 2007
I am using the SSIS Import & Export Wizard to make packages importing data from Access 2003 into SQL Server2005.
In the Access database I am using, there are about 100 tables and 4 select queries.
When I ran the SSIS wizard, it found the first query fine, and the package was made successfully.
Now, I need to make a package to import data using one of the other select queries (it has two subqueries.)
When I run the wizard, the "Select Source Tables and Views" dialog opens and shows all 100 tables, plus only two of the queries, not all 4. Two are missing, including the one I need to do the import.
I cannot see why these two queries would be excluded. One is a compound query (the one I need) the other is not. Is there a limit to the number of objects the dialog can show?
If anybody has had this problem please let me know. For now it's a real show stopper.
Many thanks
Mike Thomas
View 7 Replies
View Related
Feb 14, 2007
I bought a new HP server with Windows 2003 SBS Premium.
I also was told buy the company how installed the server, that they installed all the components of SQL.
When another company came to install a new business software for us, they told me that the Integration services is not installed.
We tried together to install the SSIS with no luck.
When we run the Setup(or used Add/Remove software) we couldn't find the Integration services check box in the list of the setup.
I also asked assistans from the company that i bought the server fromk, and they also couldn't understand where is it.
We have an HP Proliant server, Windows server 2003 small business preminum SP1, SQL server 2005.
I was told that without the SSIS we can't start working with our new software, so this is very urgent for us.
View 11 Replies
View Related
Nov 15, 2001
When I try to open a DTS package I get the message above. These packages were written by other developers.
Other packages on this server state that the Parameter is incorrect when I try to open them.
Any ideas?
Jim
View 2 Replies
View Related
Feb 18, 2006
hi
i'm trying to install sql server 2005 standard reporting services, the sql part is installed sucessfuly, i am stuck with the reporting services part, when i enter the URL for both the reporting service, and the report manager, i get the error :
the system cannot find the file specified. (Exception from HRESULT: 0x80070002) (rsRPCError)
does this sound familiar to anyone, let me know if i need to post more detail.
thanks
Ben.
View 6 Replies
View Related
Oct 23, 2007
I have both VSTS 2005 for Developers and VSTS 2005 for Database Professionals installed on my PC. I can't find any BI or SSIS projects in File->New Projects. The only database-related projects are to write Stored Procedures, Views, etc. Where is it? Did they break it when they added the Database version on top of the Developers version?
View 12 Replies
View Related
Nov 21, 2007
I remember reading one year ago that SSIS came with Advanced Services, or SP1 for SqlServer Express.
I have the file SQLEXPR_ADV which i presume is Advanced Services , installed it, no sign of SSIS !?
Can someone point me in the right direction, half hour Googling, Foruming, MSDN still no results of where to get it .
View 5 Replies
View Related
Mar 24, 2008
We have a sql job type SSIS package that is not populating a database table as expected and I'm trying to figure what why not but I'm not sure where the "code" is. The person that created it said they copied a legacy package (sql 2000) and made modifications to it, then migrated it to the new version. When a legacy package is migrated is there a SSIS solution built? I see you can edit SSIS packages only in BI Development Studio but I'm not sure where to find package.
This post may answer my question but if you have any additional or updated information I'd like to hear it.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=393634&SiteID=1
So, to view or edit the package you have to export it?
Package location
Select the type of storage location to export the package to. The following options are available:
SQL Server
File System
SSIS Package Storage
So do you pick "File System" in order to view it in BI?
Thanks for your help.
View 6 Replies
View Related
Mar 12, 2008
what table/column can we query to determine if ssis package is running ?
How do we kill package that is running ?
View 4 Replies
View Related
May 7, 2002
I need to find out when the data file and transaction log file is full. Is there any stored procedure that will let how much space left. We don't want to set Autogrow for the files.
Thanks,
Rau
View 2 Replies
View Related
Feb 28, 2007
I created an assembly to access my SSRS web service in a Script task. The package runs fine on my machine but gets the following error from the production box.....
The script threw an exception: Could not load file or assembly 'Microsoft.SqlServer.ReportingServices2005, Version=0.0.0.0, Culture=neutral, PublicKeyToken=3bd4760abc5efbcb' or one of its dependencies. The system cannot find the file specified.
I followed the exact same procedures for creating the .dll on the production box as I did developing on my machine...strong name, load to gac etc....but it still cannot find it.
My production SQL Server is 64 bit so perhaps there is another step I need to take? Anyone have a clue as to what I may be missing?
TIA
View 1 Replies
View Related
Oct 31, 2007
Hello,
I have a package that copies data FROM an MS Access database table to a SQL Server 2005 table. 'Run64BitRunTime' has been set to 'False'. The package has been saved to SQL Server. I have a Job that runs the package using an operating system command. The following is the command syntax:
€œC:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe€? /SQL "RebatesRebates_TotalSecurity" /SERVER bwdbfin1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I created the package on a machine other than bwdbfin1. I can run the package from Visual Studio. I can run the package from Integration Services. I have sysAdmin rights on bwdbfin1. I've tried running the job using two different proxy accounts and the sql agent account. I have the location of the Access database. No matter what I do, the Job fails with the following error:
The process could not be created for step 1 of job 0xD947EF76ACD96340B12279FEDDC580CE (reason: The system cannot find the file specified). The step failed.
I have an identical package that copies data TO an Access database. The database addressed in that package and this package are in the same location. The 'CreatorName' of both packages is the same. I have logging enabled for every category, but nothing is written to the sysdtslog90 table when the Job runs. I set up error output in the DataFlow task, and have also tried to 'ignore' errors. I have searched the forum, done a web search, and I can't find a reason for the failure.
Is dtexec the file that is not found? If that were the case, then why can a Job run my other package?
Any ideas?
Thank you for your help!
cdun2
View 4 Replies
View Related
Jan 29, 2007
I may have one or several files in a folder that act as source files.
How do I loop through the folder, picking the oldest dated file according to its 'Date Modifield' attribute.
Do I have to use a Script Task or similar as I can't seem to find a way to do it with normal tasks.
If so, does anyone have example code.
Thanks
P R W.
View 1 Replies
View Related
Nov 9, 2007
I'm following these instructions: http://technet.microsoft.com/en-us/library/ms156421.aspx
I run this restore letting it create the database. It works fine:
RESTORE DATABASE ReportServer
FROM DISK='\MYMACHINEe$BackupsReportingServicesReportServerData.bak'
WITH NORECOVERY,
MOVE 'ReportServer' TO
'G:DataReportServer.mdf',
MOVE 'ReportServer_log' TO
'J:LogsReportServer_Log.ldf';
GO
I run this command and get this result set, with the fileIDs in red.
Restore filelistonly from disk = '\MYMACHINEe$BackupsReportingServicesReportServerLog.bak'
ReportServer2005
d:Program FilesMicrosoft SQL ServerMSSQLdataReportServer2005.mdf D
PRIMARY 3407872 35184372080640 1 0 0 9A65122E-36B7-4D93-A0FB-F1A894641A09 0 0 0 512 1 NULL 62000000029300037 D49504CB-7E10-4BA3-B737-F2F9F2070F39 0 1
ReportServer2005_log
d:Program FilesMicrosoft SQL ServerMSSQLdataReportServer2005_log.LDF L NULL 3211264 2199023255552 2 0 0 0D6FE3C7-C5CC-49FB-A66C-43272EB47763 0 0 0 512 0 NULL 0 00000000-0000-0000-0000-000000000000 0 1
then I run this LOG restore:
RESTORE LOG ReportServer
FROM DISK='\MYMACHINEe$BackupsReportingServicesReportServerLog.bak'
WITH NORECOVERY, FILE=2,
MOVE 'ReportServer2005' TO
'G:DataReportServer.mdf',
MOVE 'ReportServer2005_log' TO
'J:LogsReportServer_Log.ldf';
GO
Msg 4038, Level 16, State 1, Line 1
Cannot find file ID 2 on device '\MYMACHINEe$BackupsReportingServicesReportServerLog.bak'.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
I see file ID 2 identifying the log file. I've never done a restore like this - using copy_only and backing the database and log into separate .bak files, so maybe I'm misunderstanding something here.
Thanks for any help
Sam
View 2 Replies
View Related
May 13, 2008
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
View 10 Replies
View Related
May 2, 2007
I want to enumerate all *.xls and *.csv file. How to fill the Files box? I tried
*.xls, *.csv
*.xls *.csv
*.(xls|cvs)
all doesn't work
View 4 Replies
View Related
Oct 24, 2007
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
View 5 Replies
View Related
Jun 26, 2014
I have three databases and 40 tables within each database on my server, for each of the tables I want to know which SSIS package generates that table. Is there a script that can do this?
If the SSIS package does not create or populate a table on the server I then want to check if there is a stored procedure that populates this.
View 6 Replies
View Related
Jun 19, 2015
Historically I've always written a VB script to copy a file from a sharepoint library. I don't like this method because I have to input a username & password in the script and maintain a config file.
Yesterday I was playing around with using a file system task. The sharepoint file has a UNC path so why not? I created a simple test package with a single file system task that copies the sharepoint file (addressed via UNC) to another network location. Package runs fine locally.
I try running on our utility server but am getting a "The file name [SHAREPOINT UNC PATH] specified in the connection was not valid" error. Package is running with a proxy on the server and the proxy account has the same permissions to the sharepoint site (so far as I can tell) as me.
View 0 Replies
View Related
Dec 4, 2014
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies
View Related
Dec 19, 2006
can anyone help me with this error message
Server Error in '/' Application.
The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Configuration.Provider.ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.]
System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2546149
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.112; ASP.NET Version:2.0.50727.112
View 3 Replies
View Related
Mar 14, 1999
I found a a SQL Link file (support SQL7) on Borland site. But now I know the zip file which I download is bad. But I can't find it now because Borland have closed the entry to /,,,,/SQL7beta. I want to get it next time. But I can't find it. Can you help me?
View 1 Replies
View Related
Apr 28, 2004
We are using SQL Server with logshipping.
I noticed in the last two days the presence of 2 bigs journal files
(about 2Go each, transfered from primary to secondary ).
I want to know if there is a way to see what was the operation that lead to have this to big 2 log files
(sql statement or transaction... : with Oracle for instance, if we have chance, we can find this kind of info in
a dynamic views by the name of : v$sqlarea...)...
Thanks in advance
View 1 Replies
View Related
Oct 11, 2006
Say I have 3 .bak files named:jamesB.bak, jamesG.bak, jamesW.bakIs there a clever way to find out which is the most recent of thesebackup files?? Using sql query analyzer preferably...
View 4 Replies
View Related
Sep 6, 2007
In the FLAT FILE source, I have to find the duplicate rows based on the two fields say, "bill number" & "invoice date".
The rows within flat file has like "bill number" which is duplicated on the same "invoice date".
If duplicate rows found then move the duplicate rows into another Flat File.
If not found then move the rows into Sql Server Table.
Pls provide the solution. Thank you
View 9 Replies
View Related
Jan 19, 2008
Hello peopleI have an issue with the Bulk Copy Program-utility.When I execute the BCP in the commandline, it will create a CSV-file.Code in commandline:
Code Block
bcp.exe PCVO.dbo.tblOpleidingen out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -Sservername
Code in stored procedure:
Code Block
USE [PCVO]
GO
/****** Object: StoredProcedure [dbo].[sp_ExportAccessToCSV] Script Date: 01/19/2008 16:36:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_ExportAccessToCSV]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @sql varchar(8000)
SET @sql = 'bcp.exe PCVO.dbo.tblOpleidingen
out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -S' + @@servername
EXEC xp_cmdshell @sql
END
Code in C#-application:
Code Block
String connectionString = "Data Source=THUIS-LENNY\SQLEXPRESS;Initial Catalog=PCVO; Integrated Security=True";
System.Data.SqlClient.SqlConnection con = new System.Data.SqlClient.SqlConnection(connectionString);
con.Open();
System.Data.SqlClient.SqlCommand da = new System.Data.SqlClient.SqlCommand("sp_ExportAccessToCSV", con);
da.CommandType = CommandType.StoredProcedure;
da.ExecuteNonQuery();
When I use the BCP-utility inside a stored procedure (called in a C#-application),using the xp-cmdshell, I can't find the created file. I even don't get an error or warning message.Can somebody help me?Thanks in advance,G VossiusNB: I'm using SQL Server 2005, Visual Studio 2008 C# EE
View 1 Replies
View Related
Dec 17, 2007
I am getting a backup file in default directory by using this script
Code Block
BACKUP DATABASE CPHONE
TO DISK = 'CPHONE.Bak' -- send to default pathaway
WITH FORMAT,
NAME = 'Full Backup of CPHONE'
Is there any way to find where is the default path of the SQL server, in order to show to the user from a VB program in which pathway the database back up is stored
View 4 Replies
View Related
