SSIS Job Success But Package Didn't Run
Mar 16, 2007
I created a SSIS package that imports a file then moves the file to a folder called processed.
I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
View 6 Replies
ADVERTISEMENT
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Mar 26, 2008
I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
Any ideas?
View 3 Replies
View Related
Apr 10, 2007
I have an SSIS Package that executes a stored procedure. It turns out my stored procedure was missing.
However, the SQL Job Scheduler reported that step as success.
Can anyone tell me why?
`Le
View 8 Replies
View Related
Sep 4, 2007
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
View 3 Replies
View Related
May 6, 2006
Dear all,
I have built an SSIS package by using the BI Dev Studio and enabled its configuration xml file.
The package have a variable called TranDate and I want to put it dynamically from a Calendar on my website (just like assigning a variable).
I have successfully change the value of that variable in the configuration files (affected to the xml file).
Then I loaded the package and executed it (through my web). It's still get the old value (which I have assigned while creating the package).
I didn't understand that where else can the package get the value of that variable so it still get the old value (that value have never appeared in the xml configuration file anymore when I changed it).
Thanks for reading this, and I am looking forward to seeing any helps from you guys.
View 3 Replies
View Related
Apr 29, 2008
Hello again to everyone,
Because of aleatory problems some of our Analysis Services Tasks fails and sometimes success with not know reasons. You run the task and it fails, the next time it fails, the next time is success, and so on aleatorily.
The solution of this is to put those tasks in a loop (ore someting similar) that only ends if all of the Analysis Services Tasks succeeds. If not, those tasks starts again. Do you know what I mean? How can I build this? I have investigated with checkpoints, with For Loops ... but still I dont find the way to do it.
Does anybody can help me? I suppose it's not so difficult, but I'm stuck in finding the solution...
Thankx once again.
JohnSSIS
View 3 Replies
View Related
Jan 25, 2006
Hi
I am writing a package that i want to have email me on two possible success scenarios.
essentially, this is the conditions:
IF @result = 0
BEGIN
EXEC master..xp_cmdshell @copyfile, NO_OUTPUT
PRINT 'Operation Successful'
END
ELSE
BEGIN
RAISERROR ('This operation failed. Error Code:01. The source and destination files are identical.', 0, 1)
END
If the first condition is met, I want to fire off an email stating success.
If the second condition is met (the RAISERROR) then i want to fire off a different email.
Now, the problem is, I am not sure how to flow it. Both conditions are successful, thus it always fires off the success email if i use an "On Success" flow.
How do i capture the RAISERROR before the email to tell it which email to send?
Does this make sense?
View 1 Replies
View Related
May 22, 2008
I have an ssis package with three tasks. I want to force the execution result of the package to success all the time. I execute the package from a .net application. I tried to place my tasks in the package inside a sequence container and created a new script task which would execute when the any of the tasks in the container failed. I am setting the result of the package to success in this script task. This is not correctly working for me. Even if one task in the package failed and the last script task went to success, the .net app is receiving a failure status. Is there any way to handle this in the ssis package than in the .net app. There might be an easy way, but I am unable to find it.
Thanks in advance!!
View 4 Replies
View Related
Aug 27, 2007
Dear all,
I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value.
This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ?
Here is the capture of my package, since I didn't know how to attach the picture in this forum.
Thanks in advance.
Best regards,
Hery
View 12 Replies
View Related
Nov 8, 2006
Hi
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
Any help welcome.
View 4 Replies
View Related
Jun 23, 2006
hi!
i am trying to execute through command line the following:
dtexecui /SQL "ArchiveMain" /SERVER "SE413695AASQL2005" /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
I am actaully creating an archiving package.
1. All it does is get some data from the Table.
2. creating directory and set usedirectoryifexist = true
shows some warning when i run that directory already exists cos i don't want to create new one i want to use the existing one.
3. actual archiving to get call to another package for archiving - warning while running the package that parent variable is missing
The pacakge seems to run while i execute it thorugh command prompt but i get this message
DTExec: The package execution returned DTSER_SUCCESS (0) but had warnings, with
warnings being treated as errors!
Thanks,
Jas
View 1 Replies
View Related
Feb 19, 2015
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination
|
update SQL table Flag column<---------------------------------|
View 9 Replies
View Related
Mar 11, 2008
I have an SSIS package that executes a stored procedure. In that stored procedure is a try/catch block. If the try isn't successful, it goes to the catch block which does a rollback. So when I execute the SSIS package, it tells me that the stored procedure was ran successfully because there essentianlly were no errors and everything ran fine, but in reality, everytime it goes into the catch block and does a rollback, I want the SSIS package to fail as well. How would I send back a failure to the SSIS package from the stored procedure?
View 13 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
Oct 29, 2007
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
View 3 Replies
View Related
Feb 4, 2007
So any help? I tried the stuff in the FAQ
View 3 Replies
View Related
Jun 8, 2007
First latest Identity column is 5 I try to insert value to table which have Identity column by ExecuteNonQuery() method. There was some error and rollback this transaction.and then I modified code for completely saving after that I try to insert value again by running program although this transaction completely But value in identity is 7 ( It seems value 6 didn't rollback when not completely saveing ) Please advise me How can I rollback Identity column value ?
View 1 Replies
View Related
