I am working on a SSIS solution that has 4 packages. All 4 have run before and I have not modified any of them, however I keep getting the error message and it keeps locking up on one of my packages. Does anyone have any advice or a remedy for this?
Any help is appreciated!
I keep getting this balloon message along with 'please contact microsoft if you continue to get this message' when using SSIS
Here's the news: I continually get the message so here I am 'contact MS'
There is no link in the balloon indicating quite how I should contact MS.
Any one else have this problem?
I get this message in a balloon that pops up frequently when I am trying to work in the SSIS designer. For example, I get it when working in a DataFlow task, trying to open editors for the OleDb Source and Destination. Is anyone else getting this? What could be the cause, it seems to get sluggish. Thanks.
View 33 Replies View RelatedI have three very simliar packages that I edited. I added an Exec SQL Task to truncate a table. These packages are not large or complex. When I simply try to open two out of the three packages, Visual Studio hangs and I get the balloon saying it's busy. I see in the bottom left hand corner, "Validating Load Phase". This never changes. My question is how can I get into this package? I hadn't yet checked it into SourceSafe If I even attempt to single click on any step in the package, it will hang. I've also had a co-worker attempt to open the packages on his computer, and he gets the same thing, so it's definitely the SSIS package. Any help would be appreciated!
View 9 Replies View RelatedI'm now getting this with great regularity. Dell PWS390,2gig,Big HD,experienced user C++...Refactor recently installed although I do not use it.
CLEARLY, the hang comes when one highlites a line and then cursors down to highlight additional lines...I believe this invokes refactoring --- while pre-refactoring install would get a hang occasionally, I now get one frequently. I am uninstalling refactor....
What does this mean? I am building a package with a datareader task, derived column task, data conversion task, ans several ole db destinations.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{5A78E6D8-6AE0-4D2B-81C1-4B990840B717}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
I am having a problem developing a SSIS package in Visual Studio and SQL Server 2005 Enterprise Edition.
Validation is happening after I have set ValidateExternalMetadata = FALSE causing and error
My package writes to a SQL Server table with a handfull of rows and columns using OLE DB destination.
One of the columns in the table is a 'NOT NULL' data type.
I have a trigger on the table handling any null condition. (see below)
(I know the trigger works because I have tested it by inserting rows manualy within SQL Server Mgnt Studio)
When I €œExecute Package€? (DEBUG) my data flows through till the OLE DB destination, which turns red, errors out, and does not attempt to write the data !!! !!!
Ideas, suggestions ??
My next step is to develop a work around so that Visual Studio and SQL Server 2005 Enterprise Edition SSIS will write the data and not error out.
Thanks
Trigger:
CREATE TRIGGER [dbo].[dim_ins]
ON [dbo].[rollup_dim]
AFTER INSERT
AS
BEGIN
update rollup_dim
set str_link_id = str_id
where str_link_id is null;
END
I have a personal project that performances analytics on a SQL Server (express) Db thru SSMS. I connect via an ODBC to SQL Server and create Access 2013 queries and reports of web traffic to my Web portal. The source data is from Google Analytics of various webpages, which I import to SQL Server and link to the Access Db.
I wanted to automate some of the manual extractions thru SSIS with a package that would pull in the Xcel sheets from SQL Server (or even Access). I started SQL Data Tools (SSDT) and here is my problem. When I attempt to open Package.dtsx I have an error that indicates SSDT must be installed on one of several SQL Server installation. Mine is Evaluation which I have and SSDT is installed in it.
I used SSDT to open Visual Studio 2010 and then it indicates I must have SSDT in SQL Server 2012.
Apparently I have to run SQL Server Setup and install SSDT in it. But, I don't have a setup of this type. Or at least I have not found it by searching my Windows 8.1 machine. This seems like a very elementary problem that can be fixed by a MSDN download or some pointer to where I need to go to install SSDT within SQL Server 2012.
I have recently installed Visual Studio 2008 Beta 2 on a development machine that was running SQL Server 2005 SP2a without any issues. Not I find that I can no longer run any of my SSIS packages and I keep getting the following error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154
Per other posts, I have reinstalled MSXML 3.0 to no avail and I have looked for every SQL Server patch I can find - I appear to have all of the latest patches for SQL Server.
Can somebody please help?
I installed Visual Studio 2008 Beta 2 Professional yesterday and now none of my SSIS packages will function. Each time I attempt to run the transform, I obtain the folloiwing error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154.
I have tried to apply every patch I can find for SQL Server 2005 - inclduing both the SP2 and SP2a patches. I have tried reinstalling MSXML 3.0 - nothing seems to work.
Can somebody please help?
Thank you!
I can't open solutions created in Visual Studio 2005 in Visual Studio 2008
---------------------------
Microsoft Visual Studio
---------------------------
'TransformFoxData.dtproj' cannot be opened because its project type (.dtproj) is not supported by this version of Visual Studio.
To open it, please use a version that supports this type of project.
---------------------------
OK Help
---------------------------
Does that mean it is a requirement to have SQL Server 2008 installed ( which I don't want ) to make it work in Visual Studion 2008.
I just uninstalled VS 2005.
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedWhen I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
How to execute SSIS package inside of Visual Studio?
I have opened the file, but do not see any way to execute it. Please advise. Thanks
When opening an package (.dtsx) the toolbox no longer shows the Toolbox groups and items as before...
how do I reset the groups and items?
Have tried reinstalling SQL Server, and are able to manually add groups and items, but I'm looking for the correct procedure to get them back.
.LP
I have created one Custom Task in SSIS. Basically I have one solution and 2 class library project one for Task and one for UserInterface
when i try to drag new task from tool box it says following errror
===================================
Failed to create the task. (Microsoft Visual Studio)
===================================
The task editor of the type 'CustomErrorControl.CustomControlnew,CustomErrorControl,Version=1.0.0.0,Culture=Neutral,PublicKeyToken= 0c2b681d5171851e' is not installed correctly. (Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskEditorNotProperlyInstalled&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.InitializeTaskUI()
at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.OnNewTaskAdded()
at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.CreateExecutable(String moniker, IDTSSequence container, String name)
CustomErrorControl is my name space and CustomControlNew is my class name.
does it TypeName should appear like what i have?
I have unstalled it and try to reinstall it. change the stong name key and they try again but somehow same error..
Please help..
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
My home machine has sql 2005 and Visual Studio 2005 installed. I uninstalled VS 2005 (RTM) and installed VS 2008 (RTM) in its place. I then found that the SSIS templates were missing. Lesson: don't uninstall VS 2005 if you want to use SSIS 2005!
1. Is there any "workaround" to this issue?
2. (If the answer to 1 is "No") I will install VS 2008 side-by-side with VS 2005 on the same box. When the SSIS issue is finally resolved, can I uninstall VS 2005 without doing damage to the VS 2008 install?
TIA,
Barkingdog
I created an ODBC to Lotus notes server and database. Â This ODBC connection works, however, when I put the ODBC into SSIS and test the connection my visual studio 2010 crashes and has to restart. Â Is there a fix I am missing on my VS2010? Â Or am I doing something wrong in my SSIS project?
View 2 Replies View RelatedWe have found that it is common for Visual Studio 2005 to crash when editing or running SSIS packages -- from CTP versions through beta versions and including the release version.
Of course we kept hoping that newer releases would become more stable, or at least more robust -- and now I'm hoping there will be a service pack, which might make it more robust?
Hi,I've had my VS 2003 installation for several months and have been working on an application for about as long without any problems. My app connects to an SQL Server 2000 database on my local machine. Lately, when I run my application as I develop and test it, which immediately opens a connection to the database, it runs fine for about 2 or 3 runs, then I get this error:=====================Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.=====================I can run it two or three times without making any changes to the code or the database or anything at all, and on the third or forth time, boom! I get the above error.Can anyone please help me find a solution to this problem?Thank you!
View 1 Replies View RelatedHello
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file.
Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows.
SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio.
I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
Did someone try this already?
Thanks!
Mop
Hi,
I started getting a delay when I try to connect to a SQL Server 2005 server from Management Studio. I get a little pop-up from the quick launch telling me : Is Busy. SQL Server Management is waiting for an internal operation to complete. If you encounter this problem... report it to Microsoft.
Has anybody experienced anything similar? If so, have you been able to fix it and how?
Thanks in advance
Farid
I've used the Balanced Data Distributor with Visual Studio 2010 and SQL Server 2012 successfully. I've now installed BIDS 2013 and I'm trying to get the Balanced Data Distributor to appear again in the SSIS Toolbox.
I've installed the x86 and x64 version and it won't appear. I've tried the new version which is supposed to have a fix for some SQL Server 2008 issues but I get the message:
The installation is not successful. Check the following prerequisites: 1. Either Integration Services or BIDS has to be installed. 2. The version of these components has to be either SQL Server 2008 SP2 (or future SPs) or SQL Server 2008 R2 (or future SPs).
That seems this version only works for SQL Server 2008.
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
Basically i'm trying to create an SSIS workflow to download Sharepoint List data to SQL Server on a schedule of some kind.do we actually have to use the GAC install approach in order to get the Sharepoint List Destination and Sharepoint List Source entries to appear on the SSIS Project workflow entities?
View 4 Replies View RelatedHello,
I have made one application in asp.net using C#. It is running perfect in my visual studio 2005 and also on localhost.
Currently i have installed visual studio 2005 in new PC. Now that application is running fine under Localhost. But it is giving me error when i run
it through visual studio in New PC and the error is
" Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed. "
One more point is that i have used DSN and so i checked the DSN also and it is also correct.
Second thing is I have two directory admin and user. If I run the pages of admin directory then it is running fine. But if i run the page of user directory then it is showing
me the above eror. I have also made different config files for both directory and one general config file for whole directory.
I have also search on google for this problem and they asked me to delete SQLEXPRESS directory from C drive but it is not get deleted and it shows the error that
"it is being used by some other program please try again."
So you might have understood my problem. Please help me to get out of this problem. Thanks a lot for reading my problem.
Regards,
Hardik B.
I'm in a SSIS Package Design tab working on a data flow. It was working fine up to now, but all of a sudden I keep getting this error that says, "Microsoft Visual Studio has encountered a problem and needs to close." And it has that "Send Error Report" and "Don't Send" button at the bottom. This started happening when I tried to add a Data Viewer on a Data Flow Path. And now every time I do this to try to debug my data flow, it gives me this message and closes my project.
However, the package executes without any package errors, but I as I described above, I can't add a Data Viewer because it keeps giving me this message and closing my package.
Hi guys
I seem to be having a bit of trouble deploying my reports from my Reporting Services Project in Visual Studio to my Sharpoint server.
Both the reporting server and sharepoint are installed on the same server.
The settings within my reporting server are as follows (where report is the site name):
TrargetDataSourceFolder - https://server/Report/Shared Documents/DataSources
TrargetReportFolder - https://server/Report/Shared Documents
TrargetServerURL - https://server/Report
I have not yet changed over all my reports to use fully qualified urls yet. As we have multiple domains in which the reports need to go through before they hit the production server and i haven't yet decided how i am going to handle the issues of the reports requiring fully qualified addresses (if someone has a way i would love to know).
I was getting the following error when i tried to deploy the projects but i delete all extensions from the blocked file types and that error went away. I can only guess that there was a file type it didn't like.
Error - "The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators."
When i deleted all the file extensions i now get the following error.
Error - "File Not Found."
Just wondering if anyone has had any success with visual studio and sharepoint deployment or run into this problem.
Thanks
Anthony
Greetings,
I am using Visual Studio 2005 SP1, SQL Server Developers Edition, Both installed recently and updated completely on an XP SP2 workstation (again all updates installed, the necessary ones at least) The issue I am having is when I try to load a solution for Integration services an error message box appears with the following:
An error prevented the view from loading. (Microsoft Visual Studio)
===================================
The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)
This issue was of course occurring before the reinstall of both Visual Studio and SQL Server DE. The issue also extends to creating new projects, in which I am not able to...so the frustration is a little high at the moment, any help would be great...
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
I receive the following error when trying to add a local database to my project.
"The data provider required to connect to the local data file could not found. The file will be added to the project but the typed DataSet associated with the file will not be generated."
I've reinstalled VS2k8, SQL Compact 3.1 and SQL Compact 3.5 on my machine and still receive the error.
Does anyone have any suggestions? I saw another similar thread about this in the VB2k8Express forum, but there were no helpful answers there. (for the curious: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2769854&SiteID=1)
I haven't used the SSCE before and so it's possible I've mistakenly omitted some required items.
Any help is greatly appreciated.
Hello:
I have a framework 2.0 winforms application that uses the data mining viewer controls. I upgraded the project to visual studio 2008 and compiled it under framework 2.0. It compiles fine, but when the form with the TimeSeriesViewer control loads, the application throws the following exception:
System.Reflection.TargetInvocationException was unhandled by user code
Message="Unable to get the window handle for the 'AxChartSpace' control. Windowless ActiveX controls are not supported."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.AxHost.InPlaceActivate()
at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state)
at System.Windows.Forms.AxHost.CreateHandle()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.AxHost.EndInit()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeComponent()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer..ctor()
at RMS2.UI.DecisionSupport.ShowModel(String modelName, Int32 tabIndex) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 72
at RMS2.UI.DecisionSupport.DecisionSupport_Load(Object sender, EventArgs e) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 42
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.AccessViolationException
Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.UnsafeNativeMethods.IOleObject.DoVerb(Int32 iVerb, IntPtr lpmsg, IOleClientSite pActiveSite, Int32 lindex, IntPtr hwndParent, COMRECT lprcPosRect)
at System.Windows.Forms.AxHost.DoVerb(Int32 verb)
at System.Windows.Forms.AxHost.InPlaceActivate()
InnerException:
The control is being added programatically, as in the wiinforms samples. Can anyone suggest a workaround? Thank you in advance.
- doug