Our Visual Studio installation suddenly starting producing the error below upon trying to open any .dtsx package; although by "suddenly" I'm sure it was due to some Windows update or other program install, update, or uninstall. I've spent two days uninstalling, reinstalling, and repairing everything that is seemingly related to VS, but no luck. I've searched the forums and could not find this specific error mentioned, although I have tried some of the suggestions to fix possibly related 'class not registered' errors, but again no luck.
===================================
There was an error displaying the layout. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=DDSErrorDeserializeDiagram&LinkId=20476
===================================
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (msddsp)
------------------------------
Program Location:
at MSDDS.IDdsDiagram.CreateShape(String ProgID, Boolean Visible, Int32 X, Int32 Y)
at Microsoft.DataWarehouse.Controls.Interop.AxMSDDS.CreateShape(String progID, Boolean visible, Int32 x, Int32 y)
at Microsoft.DataWarehouse.Design.ComponentDiagram.OnCreateShape(Object logicalObject, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.OnCreateShape(Object component, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataWarehouse.Design.ComponentDiagram.CreateShape(Object logicalObject, Int32 x, Int32 y)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.CreateExecutableShape(DtsContainer dtsContainer, Int32 x, Int32 y, Int32 width, Int32 height)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.RefreshSequenceExecutables(IDTSSequence sequence)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.AfterDeserialize()
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio ------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated. (Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
When I installed SP1 on my SQL Server 2005, the performance of the package designer dropped enormously. I have to wait like 30 seconds after I drag-and-drop a datasource from the toolbox to the design area. Also it takes a very long time to run the very simple package. Not to mention opening some complicated package that was done before applying SP1. The package scheduled in SQL Agent went from 3-4min to 5-6min.
Can anyone address this issue? Maybe there's something I did wrong?
While installing SP1 I ecountered strange behaviour (some messages about file locking, rebooting and stuff), but in the end it said that it was successful
I've got a SQL2008 database with 2008R2 Express loaded.
In VS2012 if I right click a table and select New Query, I get the Visual Designer.
In VS2013, same database, I get a blank page
I've tried a fresh install of 2012 and 2013 onto a fresh Win8.1, same thing. SQL2012 Express, same. If I use an LocalDB option, again no tools. I've tried Ultimate to see if it's something not in Pro.
Also the "code only" query doesn't connect me to the file properly, so even if I accept doing the query by hand, I have to paste a connection string every time.
I'm expecting it to do as per VS2012, and the VS2013 pages in [URL] My database is an attached file from an ASP.NET project App_Data folder.
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute: Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error: Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
I have 3 'separate' but related processes that I am developing in SSIS. Each process shares a few global variables and connection objects. None of the processes depend on inputs or outputs from the other processes. However, there is a sequence order in which they are exectuted.
Should I develop these three process in the same package or 3 separate packages in the same solution?
From the point of view of sharing the same variables and connection objects, maybe just one package? If so, would it be advise to use the toolkit's 'Sequence Container' to ensure the order in which the 3 processes are run? I noticed that 'global variables' are limited to the scope of individual packages so it would appear that a variable can't be shared between packages in the same solution? I was also thinking that in terms of configuration settings, there might be an advantage of keeping everything in the same package. The only disadvantage I can think of in relation to keeping everything in the same package is that the design layout might look a bit cluttered.
I'm tending to think one package here but would welcome comments and suggestions from those that have experience of similar design scenerios.
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
This is more a medium level annoyance than a problem. When I save a package, close it and later re-open it, the precendence constraints end up all over the place making my neatly layed out diagram a shambles.
Call me anally retentive if you like (you wont be the first ), but I find this extremely annoying. Does anybody else have this problem? Does anyone have a solution?
I'm trying to read rows from a SQL Server Table and for each row use a few columns as parameters into a query to be run against oracle which will delete oracle rows.
I add OLDEB connections for Oracle and SQL and then I try to add a "Execute SQL Task". I've also tried a "OLE Command" but I can't get the mapping of the columns to the parameters to work.
There is lots of articles on the web that talk in general around parameterized queries but no clear examples.
I also find the difference between the Control Flow and Data Flow tabs confusing as its not intuitive where to place things. It also appears to force me to re-define things that it should already know (this is no doubt because I'm interpreting what I've done / acheived wrongly).
I have my source and destination on the "Data Flow" tab along with a "Execute SQL Task" object in the middle.
I'm setting its "connection manager" the Oracle (i.e. the destination where I want the deletes to be executed). I don't follow why this also has a "connection property, surely this it set when I drag the output of the SQL Server OLEDB Source to the input of the "Execute SQL Task".
Perhaps I'm expected too much from the wizards / dialogs and I have to create "variables" and "parameters" myself?
Any help or suggestions would be very much appreciated.
Hi, I have installed backward compatimility package and dts designer components on my computer wich run sql server 2005. When i try to open a DTS package in management studio, It tries to install sql server 2000 and ask for sql2000.msi. Does any one know how to fix this so i can edit dts packages in management studio 2005?
after installing the Microsoft SQL Server 2000 DTS Designer Com feature pack and then restarting my management studio, I still cannot see or edit my dts packages. I also tried editing them in the integration services consule but no luck there. I see them under the msdb and have no option to edit them.
We just did an in-place upgrade from sql2000EE to sql2005EE and I installed the SQL Server 2000 DTS Designer componets but I don't see the option to schedule a package.
I created a DTS Package. It worked fine if I execute the DTS from DTS designer. It failed after I right clicked to Schedule Package, and than right clicked on the job to Start Job from Management - SQL Server Agnet - Jobs. When I clicked View Job History, the error was "The job failed. The last step to run was step 1 (DTSPackageName).
Why did it fail from scheduled DTS? Thanks. DanYeung
I am not sure where to ask this question. So I figured here may be ok
I have several DTS 2000 packages and I have SQL 2005 installed on my local machine. However the rest of the company is still using SQL 2000 (for now). So I do not want to convert them to ssis yet. One of the things we just did to the packages is make all flat files use \localhost and any servers point to (local). Now in ssis this works fine but using the DTS 2000 package designer it does not like either of these at all. The reason we wanted to do this is so when we switch out servers there is no changes to our DTS packages.
I am trying to run an update statement. Both these tbls were migrated from 2000 to 2005.. However the upgrade returnes the foll err. Cannot resolve the collation conflict between "SQL_Latin1_General_Pref_CP437_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Update statement is as follows:
Update a Set FIELDNAME='C' From table1 a where ACCT in (select loannum from table2 b where a.ACCT=b.ACCT) and ACCT is not null
Hi... hopefully someone can help me out with resolving this error.
We have a set of DTS tasks that have been migrated in SSIS tasks on an existing SQL 2005 server, all is fine there and the tasks run ok.
We now want to deploy a copy of the same tasks to another SQL 2005 server at another organisation, so obviously we'll need to change things like server names and file paths. The tasks update different tables in a SQL database on the same server taking information from flat files. The SSIS dtsx files contain embedded DTS tasks. I've been able to view these successfully using the tools in Visual Studio 2005.
I have created a deployment utility for the SSIS files and installed them on the new server.
When I try and run the first SSIS task on the new server it fails validation with the error "Package name is not specified". Having looked at the task in Visual Studio everything looks ok.
Does anyone know whats going on here and how to resolve it?
we have developed SSIS package in machine1 .when we copy the SSIS solution from Machine1 to Machine2 .when we open the SSIS solution in machine2 we are getting the following errors what could be the reason .help us pls.
1. Error loading Package_test.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. d:jeganssis prjsfuzzyfuzzyPackage_test.dtsx 2.Validation error. Data Flow Task: Fuzzy Grouping [3131]: The AcquireConnection method call to the connection manager "AIGSSPORTAL.Apex1.g360user" failed with error code 0xC0202009. Package_test.dtsx
[OLE DB Destination [1146]] Error: An OLE DB error has occurred. Error code: 0x80040E23. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E23 Description: "Cursor operation conflict". [DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Destination" (1146) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
have any of u encountered this error?
package is working good on source side but destination is indicated in red with the above error,it was working good yesterday,not sure what happened today all of a sudden.
I designed a report in reporting services 2005. When i look at the view layout for the report everything is aligned correctly but if i go to print preview one matrix is shifted up or down. I have tried to put the matrix inside a rectangle but the issue is still present. Does anyone know why this is happening or any suggestions on what to do to fix it.
I have an ActiveX task containing vbscript that when placed in a DTS package, will set all Connection and DataTransformation (DataPump) information correctly. Additionally, the package appears to work perfectly afterwards.
The Question: Why when I go into the DTS Designer and open a transformation (Black Arrow) between connections - that I get the "Verifying Transformations" dialog with the three radio button options of "Remove Invalid transforamtions", "Change Source/Destination", and "Remove all transformations and redo auto-mapping"?
It appears that the SourceObjectName and SourceSQLStatements are getting correctly updated as well as the DestinationObjectName, etc.
Is there a property that is supposed to be set when I modify the source and destination properties in my code to prevent this dialog?
After fine-tuning my package logging, I built a query against SYSDTSLOG9 that uses the combination of the OnPreExecute events and any subsequent event for each task to build a nice view of a package in progress, including the duration of each event. (Running tasks would have a row with a NULL EndTime.)
When running the package within the Designer, everything works as expected. Events are logged at the task level and everything bubbles-up to the package level.
However, when I run the package from SQL Agent (using the SSIS job step), none of my OnPreExecute or sub-component events are written. That is, I only get package-level OnInformation, OnPostExecute and OnError events.
This means when the job/package is executing, I can't directly see which steps are currently in progress nor can I get a duration for each step once it's completed. This will be very disconcerting for my teammates who will have to help support this at some point.
Any idea how or why there would be a change in behavior between these two execution methods?
Thanks in advance for any help. Until then, banging my head against the wall... Tim
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
I can't import a package from the SSIS to the file system of my SQL Server Management Studio. Every time i've tried the following message appears. What should i do to correct this problem? Any ideas?
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName) at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc, INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID FROM V820PRMF.GSVL01 WHERE (UPPER(SVSGMN) = 'ACCT') ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Hello Everyone, When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date 6/12/2007 4:19:15 PM Log Job History (VistaODSFeed)
Step ID 0 Server 006-DEVSQL2005 Job Name VistaODSFeed Step Name (Job outcome) Duration 00:00:00 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.
But when scheduled through jobs it gives the following error in history
"Execution as user. <user name > The command line parameters are invalid. the step failed"
