Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
Hello,
I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.
The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."
P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential
The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"
I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.
P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.
How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?
Thanks for help.
Lilia
I have one SSIS package that fails on occasion. And I can then run this in the job by itself after it fails and it runs fine. Any ideas? Any ideas on what is causing this. It is not every day but about once a week lately but it just happened again today to this is 2nd time in 4 days this has happened. It is always on this same part in the SSIS that it fails when it does fail. 4 times in last 2 weeks.
This step it is on here has a OLE DB - DB2 source and SQL server as destination. It does a couple data conversion, derived columns and then just copies the data from the db2 table to the sql server table.
Message
Executed as user: PERFORMANCEstacyadmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 6:06:12 AM Error: 2008-05-13 06:09:22.84 Code: 0xC0202071 Source: Copy SalesTender Retail TmpSalesTenderRetail [97] Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-05-13 06:09:23.42 Code: 0xC004701A Source: Copy SalesTender Retail DTS.Pipeline Description: component "TmpSalesTenderRetail" (97) failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:06:12 AM Finished: 6:09:23 AM Elapsed: 191.157 seconds. The package execution failed. The step failed.
Stacy
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
I have a SSIS package which reads an excel file and loads data into a table using script component(C#) as a source. The package runs without any errors when I manually run it on my machine and on the server. But the package fails when run as a SQL Server Agent job.
I tried all the possible fixes I found on the web but still can't get it to work.
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
Hi,
I have a SSIS package that I developed using Business Intelligence Development Studio. I imported it into our SQL Server database and it runs fine (when I connect to Integration Services within SQL Server Management Studio, and run the package). But when I created a SQL Server Agent job comprising 1 step, to run this package, it fails. The failing step attempts to read data from a MS Access 2000 DB into SQL Server 2005.
I added logging to the package, and got the following error logged to the Event Viewer:
"The AcquireConnection method call to the connection manager "CurrentYearPCStats" failed with error code 0xC0202009."
I then created a new Operating System (CmdExec) step, calling DTEXEC with the command line copied from that generated by the SSIS step. The command line is:
"C:Program FilesMicrosoft SQL Server90DTSBinnDTEXEC.EXE" /SQL "AFAReductionAFA Reduction Integration" /SERVER <ourservername> /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
This failed with the same error in the Event Viewer, but for some reason also produced a meaningful error in the SQL Server Agent job's View History:
Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file '\<anotherservername>PCStatsliveCurrData.mdb'. It is already opened exclusively by another user, or you need permission to view its data."
Please note that the SQL Server Agent runs using user id sqlservice, by default, and I have amended this user's Windows account to make it a Domain Admin.
Please let me know why I might get this error, when the package runs OK on its own.
Many thanks,
Keith.
H!
Very critical!!!! some body help..
I am execute paakge correctly from my local machine through Agent and Command line. but when i try to execute in another server it fails. I am invoking and executing as an administrator. when i run through the command prompt or as an individual pacakge in file system it works fine.
I am exceuting the package with Protection level Don'tSaveAsSensitive.
I also want to know a way to fine out what the error is exactly.not just the View History. If i set the logging for the package where do i view them???
Thanks,
Jas
Hello,
View 4 Replies View RelatedI need some help from you on a problem with SQL Server Agent that I believe many of you have experienced. When searching on the web I find some loose answers, but it would not solve my problems. So here is my story.
1. I have created two SSIS packages, package 1 and package 2. Both packages have a Execute SQL Task making a select sql statement to a table, say Customer in AdventureWorks DB. Package1 also makes a Execute Pacakge Task to Package 2. Both packages have protectionlevel property set to EncryptSensitiveWithUserKey
2. Then I created two package configuration files per package, one indirect xml configuration and one xml configuration file. The former I created an environment variable called pack1, which was specifying the path and file name of second config file. Likewise, I did for package2. Maybe I could have reused thie first configuration file, but I am not sure since package1 calls package2.
3. Now I build and deploy my packages. Then I run my manifest file, going through the deployment wizard setting the necceccary properties like server name, user, password, I have also create the same environment variables on the deployment machine. I ensure that the package1 and package2 can be run under integration services (file system). And both package works. So far so good
4. Now I want to create a SQL server agent job that runs package1 and package2. Here I found an article that decribed How to Schedule and Run a SSIS package ( DTS ) Job in SQL Server 2005 http://www.codeproject.com/useritems/Schedule__Run__SSIS__DTS.asp
5. I created a job executor account and then Create SQL proxy account and associate proxy account with job executor account as described. I created a new ssis job, specifying type ssis integration services, run as proxy, setting package source to SSIS package store, naming the server and package name (package2).
6. Now, I try running job1 which runs package2. ANd it works. I was aware if I needed to give file permission on users (read and execute) on my dtsx/dtsconfig/log files. So far so good
7. Now, I try to run job test which runs package1 (which also runs package2). But now the job fails :-(. The job runs for some seconds, but fails. I have to say that I have some script tasks with message boxes inside!!! hope this doesn't matter. I have created all neccessary accounts, proxies, credentials and so on. here is the view history
Date 17.10.2006 00:50:53
Log Job History (test)
Step ID 1
Server ABEO-GEIR
Job Name test
Step Name test
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: abeo-geir
as_jobuser. The package execution failed. The step failed.
Continue: This error is well known for you. It has been mentioned in many postings. Well, how do I go from here. Setting logging on the job results in only this information
PackageStart,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:40,17.10.2006 00:59:40,0,0x,Beginning of package execution.
PackageEnd,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:41,17.10.2006 00:59:41,1,0x,End of package execution.
Well, I read some place that I could run the job as type operating system (cmdexec). Here i could not choose Run as, but had to select SQL SErver agent account. NOw I got this message
Date 17.10.2006 01:05:21
Log Job History (test)
Step ID 0
Server ABEO-GEIR
Job Name test
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (test).
As you see, I can't come any further. I NEED HELP FROM YOU. I AM STUCK. I know many of you have solved this and I hope you can guide me through thise. I don't know how many hours or days I have used on this.
Regards
Geir F
Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.
Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?
I am quite sure as it is something with FTP connection string or security, but can't figure it out.
I have simply added the IP/login/password in the connection manager for upload task.
Any help/ guidance would be great.
Thanks,
Ad
Hi All,
I'm a bit lost on this...
I have an SSIS package which writes to a configured public MSMQ. When run directly through Visual Studio, file system or msdb it works fine (I guess these use me as the user).
However, when I schedule it through an SQL Agent Job it fails with the following:
Failed to write message ... to the queue.
This seems like a permissions thing to me, but I've tried giving full control to everyone in the MSMQ permissions, also explicitly giving full control to the user that the agent job executes as. Neither made a difference.
Any help would be greatly appreciated.
Cheers,
Tony Vaughan.
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
Is there a detailed, step by step manual that explains how to set this up?
I can run the package from SSIS but the process to set this up from the job agent is really murky mostly from a security standpoint of setting up user/proxy etc
So I need a cookbook with nice clear explanations
Does one exist?
Thanks
JPS
I've seen many postings on various forums on how to get SQL agent to execute an SSIS package. I have one that was originally created via the import wizard in SSMS, later modified in VS2005, and then re-imported in SSMS using the Object Explorer interface to load the dtsx file into SQL storage. I've tried several package protection options when importing the package: "Don't save sensitive data" (the package has no passwords in it), server storage and roles, and a specified package password (which I entered as a /DECRYPT command line parameter in the Agent job step). Agent is running using a domain admin account. No matter what I've tried, I still get an error during job execution that it failed to decrypt the password XML node. The package runs just fine when executed manually in the SSIS Object Explorer.
How can I resolve this?
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
Hello,
I'm new here and hope you will be able to help me.
I have created several SSIS packages with Visual Studio 2005.
They all work fine in debug mode.
I have been able to make them work with a ODBC connection by using a ADO.NET connection.
Then I exported them to the file system in my SQL Server 2005 database and created a task in SQLAgent to run them.
All the packages using the ODBC connection fail with the following error :
Login failed for user XXX
Error : 18456; Severity : 14 , State : 8
This error is a password mismatch.
I tried several database users and checked the passwords multiple times.
It looks like SQL Agent is not able to retrieve the password although it is stocked in both the ODBC connection and the SSIS connection.
Can you help me?
Thanks,
Ares
Dear All,
I'm using SSIS package to extract text file, and load into SQL Server. I test the SSIS package import manually, it works. Then I'm using SQL Server Agent to set up schedule. According to the log, the job agent work at the scheduled time, yet job agent throw out the error message.
Message1:
The job failed. The Job was invoked by User sysAdmin. The last step to run was step 1 (Extract Data).
Message2:
Executed as user: SQLSERVERsysAdmin. The package could not be loaded. The step failed.
Now I only have 1 step and set up "on success action" then "quite the reporting success". Any clue? Thanks
will
I found a similar thread posted under the same title as this by dba123. Unfortunately, his solution does not match my problem.
I have a SSIS package that will run fine in debug mode, will run fine when published to the server when I right click and execute it. However, when I run it through a job, either scheduled or running the job manually, the job fails. There is an entry in the servers application log telling me that "login failed for user xxxxx" where xxxxx is the name of SQL login that I am using. I know that the login works (logged in manually to the server via management studio, and it runs fine when I run it manually). Both connection managers are SQL, no flat files or other data source types. All the commands are T-SQL. The SQL Agent has full database access to both servers that the connection manager connects to - and its NOT the profile that is reporting as failing - it is a domain account.
This is totally bizzare - ANY help would be appreciated.
Guys,
Can i schedule a SSIS package by not using SQL AGENT?
Do we have any other options to schedule teh package?
I have worked on other etl tools which have inbuilt options.
please let me know.
Thanks
Hi Everyone:
I would like to find out, if there is something I can implement/or should I need to implement to avoid running two concurrent processes of 1 SSIS Package. I mean by default, I will schedule the SSIS package to run utilizing SQL Server Agent. But How I avoid/prevent it to run concurrently or what do I need to setup where I only allow 1 instance of my package to run. Thanks.
Hi,
I have a problem with an Access db
connection in my package when run by SQL Agent. I have problem running a job with my package so i used the
log and found out that when i change the connection property of the
access connection manager in my package to a local Access file on my
machine, it works just fine but if i change the connection to that of
an Access db on my Y drive (which has been set up on my machine), it
doesnt execute. I checked the security property of the network folder
in which the access db exist and I do have rights. That is to
say, i dont know why it cannot access it then. The funny part is that
when i run the packae in SSIS (VS.NET) or Intergration services in
Managment studio, it runs just fine but when i execute the job through
Sql Server Agent, it generates the following error:
OnError,CYPRESS0927,CYPRESSebuah,CLMH
from ocan
access,{b1f7035e-919c-434b-8a1d-d0f6267a13aa},{6ED748E8-16C0-4E9A-9DBD-882641657572},2/20/2006
6:15:15 PM,2/20/2006 6:15:15 PM,-1071611876,0x,The AcquireConnection
method call to the connection manager "ocan_conn" failed with error
code 0xC0202009.
ocan_conn is the name of my connection object to the access db in my package.
Is there anything Im missing.
Dear All,
My SSIS package is "Extract" data from Oracle and Load into SQL Server.
The SSIS package does not run when I call the SSIS package from a SQL Server Agent job step
I have gone through all the steps in the doc http://support.microsoft.com/kb/918760, but it still doesn't work.
Is it because of connection to "Oracle" database? and SQL Server Agent service could not recognise the Authentication information to Oracle?
Why I am saying this is becuase it works if I change the package to "Extract" data only from SQL Server.
Anyone has experience on this problem?
Many Thanks in Advance
John
Hi,
I've created a new SSIS package and am trying to run it as a sqlagent job. If I 'Run as' the 'SQLSERVER AGENT' account I get 'Executed as user: domainadministrator. The package execution failed. The step failed'. If I change this to 'Run as' 'sql agent service account' I get the following message 'Executed as user: [[servername]SYSTEM. The package execution failed'. The step failed.
I can successfully run the package in visual studio, management studio and via the command prompt.
Presumably it is a permissions problem?? I've tried setting up the logging but nothing was written to the log when I run the job, there is otherwise(via Visual studio). I've also tried the following http://support.microsoft.com/kb/918760, but it made no difference.
Anybody else experienced anything similar?
Thanks,
Paul
My SQL Agent was working fine. Now when I try to run it, it failes when trying to run my SSIS package. I looked in the logs, and job history, no luck in finding any critical errors.
My SSIS package runs fine through VS 2005 in debug mode.
Here are the only errors:
01/04/2006 09:53:48,,Warning,[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
01/04/2006 09:53:48,,Warning,[260] Unable to start mail session (reason: No mail profile defined)
01/04/2006 09:53:48,,Information,[129] SQLSERVERAGENT starting under Windows NT service control
01/04/2006 09:53:48,,Error,[364] The Messenger service has not been started - NetSend notifications will not be sent
01/04/2006 09:53:30,,Information,[432] There are 11 subsystems in the subsystems cache
01/04/2006 09:53:29,,Information,[339] Local computer is BG-SQL2005 running Windows NT 5.2 (3790) Service Pack 1
01/04/2006 09:53:29,,Information,[310] 1 processor(s) and 512 MB RAM detected
01/04/2006 09:53:29,,Information,[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
01/04/2006 09:53:29,,Information,[102] SQL Server ODBC driver version 9.00.1399
01/04/2006 09:53:29,,Information,[101] SQL Server BG-SQL2005 version 9.00.1399 (0 connection limit)
01/04/2006 09:53:29,,Information,[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 1860
Maybe someone else has asked similar question. But I still can't solve my problem after looking some threads in this forum.
The package runs fine through VS 2005. After imported into MSDB, it still does well when I start it in Integration service directly. But the packgae never achieved under SQL Agent.
Acturaly,agent can run the package,but always fail in one task. It's an 'Execute Process Task ', I use 'winrar.exe' to extract file from a mapped drive to the local disk. The Agent service account is a domain user who has the read permission on the mapped drive,also has been grant sysadmin on the SQL istance. So I think the right of the Agent account is enough.
Thanks for your help
It seems there a lot of problems running SSIS packages under the sql agent. I have read the knowledgebase articles regarding permission issues etc but I still can't get my job to run. I can run any package as a job apart from a package that connects to an external database via an odbc connection. Has anyone had any luck with this and can let me in on the secret.
View 14 Replies View RelatedI've been looking everywhere for a hint on how to tackle this, but can't get it to work.
I have an SSIS package that I am trying to run from SQL Server Agent.
I have been able to run it fine from the IDE, and from within the Integration Services system on my database server. However when I try to run the package via SQL Server Agent I get the following error:
"Executed as user: MyDomainSQLServer. The package execution failed. The step failed."
The login name is the SQL Server service account, which is a domain account on our domain. The package is set with EncryptSensitiveWithPassword and the password is supplied on the command line via the /DECRYPT flag.
I am thinking that maybe there is a permissions problem with the service account, but I can't find any detailed information about what actual permissions this account requires. I have tried expanding its permissions, but continue to get this error.
How should the MyDomainSQLServer account be configured?
I have a problem running an SSIS package in a SQL Server job. The package runs fine if I run it from the MSDB location, but if I try to run the job it fails. The job is set to Run as: SQL Agent Service Account. The SQL Service Agent service runs as a domain user SQLExec. I have logged in as this user and run the SSIS package and it runs fine, but if I create a job with only this step it fails. There isn't much information about where there is a problem. Any ideas or ways to troubleshoot this problem would be very much appreciated.
Thanks, john