SSIS Package Fails To Load With Error Loading Value &&<DTS:PropertyExpression ...

Jul 17, 2007

Good day all,



I am having an interesting SSIS problem where the package fails to load with the following error message:

Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".


This very same package runs on our test server, but fails to even load on UAT server.

SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.

This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).



Any help is greatly appreciated.



Thanks,

Alex



Here is the compete output from DTExec:




Code Snippet

D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds







View 7 Replies


ADVERTISEMENT

Load A SSIS Package Via Web Service: The Package Failed To Load Due To Error 0xC0011008 Error Loading From XML.WHAT IS THAT?

May 19, 2006

Hello,

I have a big problem and i'm not able to find any hint on the Network.

I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)

I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.

I imported the dtsx file inside my "Stored Packages".

I would like to load and run the package programmatically on a Remote Scenario using the web services.

I created a solution with web service and web page that invoke the web service.

When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)

I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.

The error message doesn't help so much and there is nothing on the www to give me and advice....

Is it a SSIS problem???

Thank you for any help!!

Marina B.



View 10 Replies View Related

Error Loading SSIS Package - CPackage::LoadFromXML Fails

Feb 19, 2007

When I try to load an SSIS package via C# code I get the following error message:-

"The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
"

The code is pretty straightforward:-

Application app = new Application();

PackageEvents evts = new PackageEvents();

Package pkg = new Package();



Package pkg = app.LoadPackage("C:\Documents and Settings\dominic_s\My Documents\Visual Studio 2005\Projects\SSIS_Util\bin\Debug\DTS\Cleanup_Staging.dtsx",evts,true);

return pkg;

What's interesting is this error message only appear's when I Start Debugging (F5 in VS 2005). If I Start without Debuggging (CTRL+F5) I dont get this error message. I've tried almost everthing suggested by other posts in this forum related to the same issue but nothing seems to work.

Any help will be greatly appreciate...thanks!!!

View 4 Replies View Related

SSIS Job Fails For Package Containing Script Task With Error The Script Files Failed To Load.

Apr 10, 2006

I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine.  The PrecompileScriptIntoBinaryCode property is set to True.  After I build the package, the .dtsx file includes a <BinaryItem> element for that Task.  Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio.  However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case.  Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?

View 1 Replies View Related

Error When Loading SSIS Package

Dec 6, 2007

Hi all,

I have problem with SSIS. When I open my packages, I always get an error message which says like this:
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.

And, in error list, I get this error message:
Error loading DIM_BUSINESS_TYPES.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'user'.".

But the package itself seems doesnt have any errors at all. When I try to run the package, it runs fine.
Btw, I use package configuration which is stored in sql server table, including the password for connectionstring.

So, what's actually wrong with my package?

Thanks

View 10 Replies View Related

Job Fails For Package Containing Script Task With Error The Script Files Failed To Load.

Apr 7, 2006

I have developed an SSIS package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.

When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."

I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:

1. The Precompile property is already set to True.

2. I have already verified that the script was compiled.

Any further suggestions?

View 7 Replies View Related

SSIS Package Failing During Bulk Load - Without Useful Error Code

May 4, 2007

I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -





[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.





How can I debug this further to see what's going wrong?

View 1 Replies View Related

SSIS Script Task Fails To Load

May 9, 2007

Hey,

I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.


If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."


on one of the package's scripts --
the given links advises to install SP2... what a useless hint.



And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)

-- whatever that might mean...

Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.

Those effects are occuring since we put SP2 onto the server...

Any comments on this topic? Similar experiences? Maybe yet some solutions too?

Regards, Frank

View 4 Replies View Related

SSIS Script Task Editor Fails To Load

Jul 26, 2007

Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!

View 3 Replies View Related

Long Time SSIS Package Loading

Sep 7, 2006

I load SSIS package using following code:

Application app = new Application();
Package pac = app.LoadFromSqlServer(packageName, serverName, null, null, null);

For simple package containing 2 tasks this code executes about 20 seconds.
If I load old version (SQL2K) package from SQL2000 then it takes 5 seconds.

Is any way to increase loading speed for SSIS packages?

View 9 Replies View Related

SSIS Data Flow Task Fails To Load All Text From Flat File

Jan 2, 2007

Hi Guys,

I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.

The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.

Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.

Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.

I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.

Any suggestions how I can get it to load the full data?

Thanks

View 26 Replies View Related

Execute Package Task: Error 0x80070005 While Preparing To Load The Package. Access Is Denied.

Jun 8, 2007

I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.

The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.

I have the Execute Package Task configured as follows:

Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)

I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.

I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):

450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.

I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?

View 6 Replies View Related

Integration Services :: SSIS Fails To Load Files From Network When Executed Via Agent (2008 R2 SP2)

Aug 5, 2014

I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.

When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.

The error says "cannot open the datafile", while the datafile location is valid.

Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?

View 4 Replies View Related

Assertion Failed Message Loading SSIS Package In Vb.net

Sep 21, 2007

I have SSIS packages created to import .xls files into sql tables. I now have vb.net code within which I am trying to execute individual packages whenever my code notices the .xls files being deposited within a network folder. When I try to run my code I get the error message:

Assertion Failed:Abort=Quit, Retry=Debug, Ignore=Continue
at STrace.ReadTraceValues()
at STrace..cctor()
at STrace.Trace(String strComponentName, String strLine)
at ManagedHelper.GetNextManagedInfo(DTS_Managed_INFO&nextManagedInfo)

here is my code:


Sub RunPackage(ByVal pkgCMD As String)

'

Dim app As New Application

Dim pkg As New Package

Dim pkgResults As DTSExecResult

'Dim pkgevents As IDTSEvents

'

pkg = app.LoadPackage(pkgCMD, Nothing)

pkgResults = pkg.Execute()


The error occurs during the pkg=app.LoadPackage(pkgCMD, Nothing) statement. Any idea of how I determine why the SSIS package will not load thru my vb app? It runs fine if I load the SSIS package in SSBIDS.
Thanks for any help or guidance.

View 6 Replies View Related

Problem Loading And Executing An SSIS Package With Too Many Lookups In BIDS

Nov 29, 2007

I have an SSIS package with around 25 lookups. Developing the package itself was slow. Now, everytime I try to load the package it takes forever and whenever I execute it I get an error.

Here are my questions:

1. Is there a way I can optimize the package?
2. Is it abnormal to have so many lookups? I am loading a dimension table with many fields and I need to look up on 25 tables to get the keys. I know one alternative is to use left joins in the source query and get the keys in the Source itself but we can have more visibility of what's happenning with Lookups. I would like to know other possibilities with lookups.

Thanks,
Srini


View 6 Replies View Related

Exec Pkg Task: Error 0xC0202009 While Preparing To Load The Package. An OLE DB Error Has Occurred. Error Code: 0x%1!8.8X!.

Feb 21, 2007

I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says

Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.



Any clue ?


Thanks,
Fahad

View 1 Replies View Related

Can't Load SSIS Dtsx Package

Apr 4, 2007

hi there,

when i start SQL Server business intelligence developer and create new Integration Service project, i will see following error:



Error loading 'Package.dtsx' : Object reference not set to an instance of an object.. C:SairiMy DocumentsVisual Studio 2005ProjectsIntegration Services Project12Integration Services Project12Package.dtsx



this error occures just on my PC and i reinstalled VS2005 and SQL2005 again and unfotunately the problem existes.


please someone helps me (just don't tell me to format my PC!!!)



tnx

View 10 Replies View Related

Error Loading Package

Dec 20, 2006

Hi there all...

We've just started using SSIS packages, and everything seems to be going ok.

I've recently set up a couple of jobs which just run an SSIS package every 5 minutes to collect data.
These run fine 90% of the time, but intermittantly produce an error.

When using a SSIS task in the job it simply reported
"Could not load Package."

I have changed these to use DTExec as I heard it gave more verbose execution results, and now I get an error like
"Executed as user: NZSQLAdmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:25:00 a.m. Could not load package "MSDBRadiusBillingGet_RADIUS_AuthLog" because of error 0x80040E37. Description: Table/view either does not exist or contains errors. Source: Microsoft SQL Native Client Started: 8:25:00 a.m. Finished: 8:25:00 a.m. Elapsed: 0.047 seconds. Process Exit Code 5. The step failed."

So far I have not been able to find anyone else with similar errors.
Whenever the package executes it seems to run fine, so this seems to be an error just getting the package to execute in the first place, and as I said it only happens internittantly.

The packages talk to a SQL2005 server using windows authentication (which I assume is inherited from the SQLAgent service user), as well as a MySQL server through an ODBC connection.
The package is saved in the MSDB SSIS Package Store and uses the "Rely on Server for Security" option

Does anyone know why this is happening and how I can fix it?

View 11 Replies View Related

Error When Loading Package

Mar 28, 2007

Hi all,
I've finished an SSIS Package on my computer and want to move the project into production server. I was just copied the whole files and when I load the package from production server there was an error occured, the description is below :

Error 1 Error loading 'SC2DC_Regular.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . e:dw workplacesc2dc_serverSC2DC_Regular.dtsx 1 1

What's the problem with my Package, I never met this error before with the same behaviour of moving SSIS project from one computer to another.
Thanks in advance

View 5 Replies View Related

Error Loading Package

Aug 10, 2006

Could some one please help me with this problem... After working with the Rational Guide To Scripting SSIS Beta Preview (Donald Farmer), chapter 6 Adv uses of the Script Task.. For some reason I cannot open or create any packages now... Here's a sample of the error message:

"There were errors while the package was being loaded. The package might be corrupted. Se the error-list for details" This came with an OK-button.

Error 1 - Error loading DataTransfer.dtsx: Unable to instantiate XML DOM document, please verify that MSML binaries are properly installed and registered.

Error 2 - Error loading DataTransfer.dtsx: Unable to load from XML

The Error-list has 6 errors and 2 warnings...

regards maggi

View 1 Replies View Related

Scheduling SSIS Data Load Package

Feb 14, 2008

I have created a package that loads data . I need advice on a quik way to schedule this baby .

Regards to ALL

View 1 Replies View Related

Error Message: Error 0x800706BE While Loading Package File D:PackagesToradSales.dtsx. The Remote Procedure Call Failed.

Dec 20, 2006

Hello,

I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,

Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.

I´m running the SSIS packages in an 64-bit environment.

Thankful for help with this!

//Patrick

View 3 Replies View Related

Error Loading Package.dtsx

Apr 9, 2008

I had encountered an error on SSIS its not allowing me to create any new packages. Below is the error message. Please do help be out.
This problem had occurred on my server machine

Error 1 Error loading Package.dtsx: Error loading value "<DTSroperty xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="CreationDate"
DTSataType="7">08.04.2008 4:39:55 PM</DTSroperty>" from node "DTSroperty".

c:documents and settingssrmohammedmy documentsvisual studio 2005projectsdictaphone_synchronizationdictaphone_synchronizationPackage.dtsx

View 3 Replies View Related

SQL Server 2008 :: SSIS Package Loading More Than 25000 Rows Using Excel ACE 12 Driver

Jun 1, 2015

I have a SSIS package running well in production however sometimes the package will fail when the excel file contains more than 25000+ rows.

The SSIS package is run by SQL Server Agent and is set to run in 32bit mode.

I checked the data by loading in batches and all data loaded successfully. But the funny thing is when I run the same package on my local development PC using BIDS and the same data file. The package loads all 25000+ rows successfully.

Is there some setting that is preventing all rows loading in the server environment.

View 4 Replies View Related

Error 0x80070003 While Loading Package File

Jul 23, 2007

Hello,
I deployed an SSIS project to my SQL Server. The project I deployed contained two packages. One called the other. After deployment I notice that both packages are indeed in the SQL Server. However when I try to run it I get the error below. This error happens during the "Execute Package Task" and the path the error is pointing at is my local development path, not the one it was deployed to. Is there any way to fix the path? And how can I get it to deploy both packages so it knows where they are when I run it from the server?

Error 0x80070003 while loading package file "C:VS ProjectsTestingRun Codes to DBRun Codes to DBSofAid_DBRefresh.dtsx". The system cannot find the path specified.




Thank You
Jaime

View 6 Replies View Related

SSIS Package Fails When Run As Job

Jan 25, 2008

I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:

SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).

I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.

View 9 Replies View Related

SQL Server 2008 :: How To Load SSIS Package For Any Specific Date

May 18, 2015

I have a ssis package which runs daily. This ssis package has couple of execute sql tasks which load data for yesterday's transaction. Ex.

INSERT INTO Shipped (Div_Code, shipment_value, ship_l_id, shipped_qty, shipped_date, whse_code,

ord_id, ship_id, ship_l_ord_l_id, Created_date) select ord.DIV_CODE as div_code, ship.SHIPMENT_VALUE as shipment_value, ship_l.SHIP_L_ID as ship_l_id, ship_l.SHIPPED_QTY as shipped_qty, ship.SHIPPED_DATE as shipped_date, ship.WHSE_CODE as whse_code, ord.ORD_ID as ord_id, ship.SHIP_ID as ship_id, ship_l.ord_l_id as ship_l_ord_l_id, Getdate() as Created_date from SHIP ship, ORD ord, SHIP_L ship_l where ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))) and ship.WHSE_CODE='WPP' and ord.ORD_ID=ship.ORD_ID and ship.SHIP_ID=ship_l.SHIP_ID

All execute sql task has query like above query. and in some query we have date filter which loads data for yesterday. Ex. one query has ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). some other query has ord.trans_date=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). this package runs daily through sql server job, so It loads data for yesterday. Now If i want to run for any particular date, How could we achieve from ssis?

View 3 Replies View Related

Transact SQL :: How To Load Data From Excel To Database Without Using SSIS Package

May 26, 2015

I have 5 tables in Academy database. Like

Academy details tables, Academy Students table, Academy Student Parents table, Academy class Section Table, Academy Staff table.

I have created the tables and data into the database. And Now I need to prepare a Excel sheet to upload data into the these tables. How to prepare the Xlsx sheet and how to upload into database without using SSIS package.

View 15 Replies View Related

SSIS Package Fails From SQL Agent Job

Mar 12, 2008

Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed

Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx

Error i got when i execute the job.

Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.


I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?

Thanks,
KD

View 13 Replies View Related

SSIS Package Fails In SQL Agent

Sep 27, 2006

Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?

Thanks.

View 5 Replies View Related

SSIS Package Fails As Scheduled Job

Apr 17, 2007

I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.

When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.



Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True



What am I missing??



Thanks

Mike Allen

View 7 Replies View Related

Execute SSIS Package Job Fails

Jun 20, 2006

Hey Folks,

I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?

I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*



Thanks and greez

Karsten

View 1 Replies View Related

SSIS Package Fails While Executing

Mar 7, 2008



While executiing an SSIS package i get the follwoing error:

Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.


The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.


I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.

I installed that also but still the same error.

I have done all but all in vain.
Your help will be very helpfull since this is the production issues.

Thanks,
Ashok

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved