SSIS Package In A .NET Application
Feb 28, 2008Hi,
Is it possible to use an SSIS package in a .NET application without install sql server?
Thank you in advance
ADVERTISEMENT
Execute SSIS Package From ASP.net 2 Application?
Jan 26, 2007Hello, is it posssible to execute SSIS packages from ASP.NET ? Which code should I Use?
View 4 Replies View RelatedCannot Execute SSIS Package From Asp.net 2.0 Application
Mar 31, 2008Hi everybody,
I have the following method and it works well on my development workstation ;
Code Snippet
private DataTable ilaclariGetir(string dataReaderDestination) {
string dtexecArgs;
DtsConnection dtsConnection;
DtsCommand dtsCommand;
IDataReader dataReader;
DtsDataParameter dtsParameter;
DataTable dataTable = new DataTable();
dtexecArgs = @"/FILE ""C:TempEczaTakipProjessisPaketleriPackage.dtsx""";
dtsConnection = new DtsConnection();
{
dtsConnection.ConnectionString = dtexecArgs;
dtsConnection.Open();
}
dtsCommand = new DtsCommand(dtsConnection);
dtsCommand.CommandText = dataReaderDestination;
dataReader = dtsCommand.ExecuteReader(CommandBehavior.Default);
// IDataReader 'ın buradaki gerçekleştirimi diğer dataReader 'lardan farklı. Kayıtlar okunurken son kayıt okunmasına rağmen
// read() metodu bir kez daha true dönüyor ve kayıt sayısı + 1 tane okuma yapılıyor. Yapılan son okuma da istisna fırlatıyor.
try
{
dataTable.Load(dataReader);
}
catch (ApplicationException ae)
{
}
dtsCommand.Dispose();
dataReader.Close();
try
{
dtsConnection.Close();
}
catch (Exception ex)
{
}
return dataTable;
}
However it always fails after I publish the asp.net 2.0 application to our Win 2003 Server. I also copied the configuration and dtsx file to proper location on the server.
I can use dtexec to execute the package without any problem on the same location.
But when called from the application, the package fails to validate.
Is it about a user- permission problem ?
Execute SSIS Package From .net Application
Feb 26, 2008Hi..
I have Created an SSIS Package to Backup a database..
I want to execute that SSIS package from a .net application
How can i do this??
Calling A SSIS-Package From A COM+-Application
Oct 3, 2007Hello
I have a SSIS-Package stored in the SQL Server. This package works fine when i execute it from the SQL Server. But if I try to execute the package from a COM+-Application, nothing happens.
Here is my code snipped:
Public Function ExecutePackage €¦
Dim myPackage As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
'----- Execute the package from SQL Server
myPackage = app.LoadFromSqlServer("\PackageName", "ServerInstance", Nothing, Nothing, Nothing)
pkgResults = myPackage.Execute()
€¦
End Function
In a Windows Forms Application I can execute the package with this code snipped succesfully. Therefor I think that the problem is my COM+-Application.
Can anybody help me?
Thank's
Jürgen Paulus
How To Execute A SSIS Dtsx Package From An Asp.net 2.0 Application?
Jul 3, 2007I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application()
'
' Load package from file system
'
Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)
'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig")
'Dim vars As Variables = package.Variables
'vars("MyVariable").Value = "value from c#"
Dim result As DTSExecResult = package.Execute()
lblResult.Text = "Package Execution results: {0} " & result.ToString()
All I get is a message 'Failure'.
Does anyone have an example of how to do this?
Pass Parameters Into SSIS Package From A Web Application
Nov 13, 2007Hi all,
I wish to pass parameter from a dropdownlist in my web application to the SSIS package so as to export the user specified table.
Is using package configuration the right way to do this?
Any advice is appreciated!
Running SSIS Package From Asp.net Application Failed
Aug 11, 2006I have an asp.net web application and a web service (both of them are created in VS 2005 - asp.net 2.0). They are located on the same web server. In both web.config files, I have set <authentication mode="Windows"/> and <identity impersonate="true"/>. Also, configured the IIS settings to use Integrated Windows Authentication and unchecked the Anonymous access (for both). The web service is called from the web app, so I have to pass credentials for authentication to the web service. The web service loads and executes a SSIS package. The package and all the other sql objects are located in the sql server 2005 (windows server 2003 - the same server as the web server).
When run the web service from develop environment (vs. 2005), I get whatever I expected. When call it from web application, however, the package failed (no error message).
In the SSIS package, there are three connection managers €“
· A: Microsoft OLE DB Provider for Analysis Services 9.0 Ã connectionType=OleDbConnection
· B: .Net Providers SqlClient Data Provider à connection type=SqlConnection
· C: Native OLE DB Microsoft OLE DB Provider for SQL Server à connectionType=OLEDB
After ran the web application and check the sql database, I can tell that the package was reached and when through the first two steps (clear some records in table_1 and extract some records from table_2 ) which relate to the connection manager B €“ ADO.Net connection. The remaining steps failed which are related to the connection managers A & C.
From SSIS package log file, found that the user credentials (domain and username) were correctly passed from web service to sql server 2005 at the first two events, but the credentials (or operator) changed from domainABCuser123 to NT AUTHORITYNETWORK SERVICE after packageStart. Then, it complains €¦ either the user, domainABCserverName$, does not have access to the database, or the database does not exist.
I think the credentials are passed ok but some setting related to the Analysis services are not correct - complaining start from there. Any clues?
Please help and thank you all!
Trouble Running Application In SSIS Package
May 16, 2007Hello,
Hopefully someone can help. I am not new to SQL Server, but am new to SSIS packages. As one step of my package I need to open and run a windows application. No problem there right? But, my problem is that I cannot get the "focus" returned back to the SSIS package. It doesnt move on to the next step until I close the windows application. It is like the package is the parent object waiting for a "finished" message from the child object, and it doesn't receive that message until the child object is closed. I've tried using a batch file to run the app and calling the batch file from an Execute Process Task, but that doesn't move onto the next step until the dos command prompt window closes and I can find a way to automatically close it from XP. I also can't find a way to kick off this windows app from a script task using command line. Not sure if I would run into the same problem going that route or not. If anyone can help, i would appreciate it.
Thanks
JK
SSIS Package Execution Failed Within ASP.NET Web Application
Aug 11, 2006Hello All,
I have a SSIS package which run well when stand-alone. However
it was failed when executed from .NET web application. It just simply return Failure. Code snip below:
Dim packagekgResults As DTSExecResult
.........
packagekgResults = package.Execute()
Environment: Windows 2003 Shared Server, IIS 6.0
Any idea?
Thanks in advance!
Tina
SSIS Package Permissions (Windows Application Log) Question
Jul 20, 2007Hello all,
I have an issue where the DBAs have informed my group that they need to get to a model where an SSIS package which presently needs Admin perms on a box in order to write to the Windows Application Log, no longer needs those perms to write to the log.
I am new to SSIS packages, though familiar with DTS packages (and ETL), so I'm wondering if their concerns (1) can be verified; and (2) if so, is there a better way to allow the package to write to the log without Admin perms (on the box). At the moment, the preference would be to do so without using .Net, in an effort to keep the implementation simple.
Scenario: A single package is scheduled to run at a predetermined time. Once complete it writes to the Windows Application Log.
Thanks in advance,
Henry
Integration Services :: Getting Error While Execute SSIS Package From Console Application
Apr 23, 2015SSIS package working fine directly.I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]" in the connection manager collection of "OLE DB Destination".
Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B. One or more component failed validation. There were errors during task validation.
Code :Â
  public static string RunDTSPackage()
    {
      Package pkg;
      Application app;
      DTSExecResult pkgResults;
      Variables vars;
      app = new Application();
      pkg = app.LoadPackage(@"D:WORKPackage.dtsx", null);
   Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
}
I have recreate the application with again new connection in SSIS. Still not working.
DB : SQL Server 2008 R2
Job Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine
Aug 30, 2006Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Error While Executing SSIS Package From Other SSIS Package
Jan 10, 2007Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Trigger DTS Package Thr' Asp.net Application
Jun 17, 2005I am newbie to DTS stuff. Is there anyway I can trigger DTS package thr' asp.net applicationPlease help
View 1 Replies View RelatedDTS Package :MMC.exe - Application Error
Feb 13, 2007Hi when i open my DTS package on DTS design , and when i go through different connection and test connection it successfully , when i cancell the step properties i got the error below and thw whole enteprise manager closes, i do not have ant problem with other dts packages except two of them which keep giving me the error below any suggestions
MMC.exe - Application Error
'The instruction @ "0x10001919" referenced memory @ "0x00000004." The memory could not be "read
How To Save DTS Package As An Application
Sep 29, 2005Hi,I want create stand alone application from DTS package. I remember Idid one time ago, I couldnt recall how I did it.Thanks.
View 4 Replies View RelatedDACfx Application - Could Not Load Package From Dacpac
Jul 21, 2015UPDATE: Using Visual Studio 2012 and SSDT 11.1.50512.0
I am using this code to load a dacpac and get the version number from it:
using (DacPackage dacpac = DacPackage.Load(ADacpacFile))
{
retVal = dacpac.Version.ToString();
}
After I install the application on a test machine, this code executes properly and returns the version number on the first run of the application. I can execute the code multiple times while running and retrieve the version number.Â
Once I exit the application and then reload it, the above code fails with the non-descript error message "Could not load package from 'filename.dacpac'. Stack trace shows: at Microsoft.SqlServer.Dac.DacPackage.Load(String filename, DacSchemaModelStorageType modelStorageType, FileAccess packageAccess).
I have tried rebooting. I have tried manually copying over the dacpac files from the install source. I get the same error every time. The only thing that works is uninstalling the application and reinstalling it. Then it works for the first execution and fails again afterwards.Â
On my development box, it works every time without error. Only when I deploy the application via install does this happen. I have tried two different boxes (both Win7 64bit) with the same result. The dll's that are being installed with the application are:
Microsoft.Data.Tools.Schema.Sql.dll
Microsoft.Data.Tools.Utilities.dll
Microsoft.SqlServer.Dac.dll
Microsoft.SqlServer.TransactSql.dll
Microsoft.SqlServer.TransactSql.ScriptDom.dll
How To Get Application Path In Integration Services Package?
Apr 13, 2007We have a main package which is calling multiple other packages. The the child packages uses parent package variables and which we are configuring using configuration file while installation of the package. Here we need to set each path while installation because there are many variables using the same path with the different file names(Different files stored in same Folder).
We want to get the main path and then if we use relative path in other variables then we need not to assign all the variable paths while installation.
How to we can get the Application path in Integration Services Package(Script Task)?
Thanks in Advance!
Passing Execute DTS Package Result (success/failure) To Calling SSIS Package
Mar 6, 2008I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Error Stating Package Failure While Executing SSIS Package In Standard Edition
Feb 2, 2007Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.
May 2, 2008Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
Is It Possible To Change Or Replace The Default Package Template Named New SSIS Package?
Feb 21, 2008I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedSQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing
Jun 3, 2014I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedProblem When Running A SSIS Master-package-child Package On Non Default Sql-server Instance
Dec 6, 2007Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
Passing Value From A Child Package To The Parent Package That Calls It In Ssis
May 21, 2007hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Report With SSIS Package Having Indirect Package Configuration Setup
Sep 10, 2007Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
How To Compose The Connection String Of A SSIS Package That Execute Another Package?
Jul 6, 2006Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
How To Make Application.LoadPackage() And Package.Execute() To Run Asynchroniously?
Aug 10, 2006Hi,
I am trying to execute a SSIS package programmatically. When a user drops a file in a shared folder, we execute the package based on that file. I am using SqlServer.DTs.Runtime.Application.LoadPackage() and SqlServer.DTs.Runtime.Package.Execute() functions each time to do this.
The problem is, when, say two people drop a file, the second one will not execute untill the first one is completed. I also tried only calling LoadPackage() a single time, and then storing the instance and calling Execute() in a different thread on each file drop; although the blocking still occurs. I assume the Package object is the one doing the blocking then behind the scenes.
Is there any built in functionality to make these functions (Application.LoadPackage() and Package.Execute()) run async? If not, has anyone had much success sticking these calls into a thread? I tried sticking these calls into a thread using System.Threading.ThreadPool.QueueUserWorkItem(), and this appears to work, however it randomly crashes the program when I drop multiple files one after the other. The exception also isn't too helpfull (pasted below):
"The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails."
So, is what I am trying to do possible? I know it must be, because when I was using .NET 1.X, I was just calling dtexec via the command line, and dtexec was able to execute many packages simultaneously....
Thanks for any help,
Drew
SSIS Parent Package Can Not Find The Child Package
Oct 13, 2007I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View RelatedSchedule A SSIS Package Which Execute DTS 2000 Package
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Problem Setting Package Variables In SSIS Package
Sep 8, 2006Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
SSIS Package Failing As A Job, But Getting Successful When Run As Package
Nov 6, 2007when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest