SSIS Service Not Available On A/P Failover Server
Dec 17, 2007
Greetings,
Ever since our sql2005 A/P failover cluster failed over to the 'B-passive node', I have a failing SSIS scheduled job with a 'missing component' error. While verifying services in computer management and sql surface area config, It appears that the SSIS service is not available because its not listed therefore cant be started. I have examined both nodes and the primary "A-active node' shows the SSIS service but the passive node unlisted. The server has failed over before during normal scheduled updates and sevice pack installs however this is the first occation we have not failed back to the primary node for normal operation. Any ideas or clues would be appreciated.
View 6 Replies
ADVERTISEMENT
Nov 26, 2007
Hello all,
I am intsalling SQL 2005 in an activepassive cluster. The OS is Windows 2003 with SP1. Everything installs OK but the sql server service cannot start afterwards. There are many access errors in the Security Event log - see example below - and numerous "SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. " errors in both the SQL and Application event logs. I have tried installing SQL in both mixed mode and under Windows Authentication and get the same errors. I can install SQL 2005 outside of the cluster on both nodes. Other items of note: This was a SQL 2000 cluster. I uninstalled SQL 2K, the virtual name was changed (IP remained the same) and the DNS entry was updated to reflect the new name. Early in the installation process - 3 or 4 days ago - I got a few errors about the Server Principal Name had to be updated but when I do a setspn -l the both nodes are listed and the entries look fine, though there are no entries for the sql service (MSSQLSvc). Not sure if there should be entries for the virtual name, but there aren't any for either the old or new name. Does the new virtual name need to be added to AD? Here is the security error - Event ID is 560 and it looks like there's a problem with Remote Access and is generated when trying to access either node:
Category: Object Access
Type: Failure Audit
Event_ID: 560
User: NT AuthorityNetwork Service
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: RemoteAccess
Handle ID: -
Operation ID: {0,134558507}
Process ID: 1516
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: CM-OHCO-DS006B$
Primary Domain: SWNA
Primary Logon ID: (0x0,0x3E7)
Client User Name: NETWORK SERVICE
Client Domain: NT AUTHORITY
Client Logon ID: (0x0,0x3E4)
Accesses: Query status of service
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x4
One other informational message that may be of use - looks like there's a problem with dll's for remote access, though this isn't pertaining to SQL:
The description for Event ID ( 0 ) in Source ( srmservice ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: srmservice error: 0, Started the agent (srmagent.exe)..
View 5 Replies
View Related
Sep 4, 2007
We have a Prinicipal, a Mirror and a Witness server. We have automatic failover configured between the Prinicipal and Mirrored server. When we stop MMSQL service on Prinicipal, not all the databases failover to the Mirrored instance.
Any suggestions would be welcomed as we have a tight deadline to get this in Production.
View 5 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
May 9, 2015
I want to install service pack 3 to my SQL Server 2012 Enterprise running on windows server 2008 R2 Enterprise fail over cluster, I read about the SP installation in technet, its mentioned that the passive node should be patched first and to do this the passive node should be removed from the cluster, I need to know whether I should completely remove the node from windows cluster or remove the node by using SQL Server installer and install the service pack and then add it back to the cluster, Can I do this by pausing the node in cluster and perform the service pack installation ?
View 3 Replies
View Related
Jun 26, 2007
I have recently installed SQL Server SP2 on a Windows 2003 x64 server SP 1 and now I cannot open existing packages on that machine. The packages work fine on other machines. Also, when I create a new package and then attempt to add a data flow component, I get an error that the designer could not be initialized. It does add the component, but when I try to delete it, I get an error that the collection cannot be null (parameter: c). I have read some posts that point to registry permssions, and have ran the sample c# code, but I do not see any problems. Anyone have a suggestion?
View 5 Replies
View Related
Mar 3, 2007
We have set up Mirroring with a witness server and everything works fine when we failover from the SQL Management console.
However, if we failover when our Maccola client is connected, the client blows up - clearly because it can no longer connect to the database.
The ODBC DSN used by the Maccola client shows a checkbox for the 'select a failover server' but the checkbox is grayed out.
Also the summary of settings for the DSN at the end of the wizard reveals that the failover to server (y/N) option is set to N.
The default setting for this DSN is 'populate the remaining values by querying the server' but it doesn't appear to be getting the settings for failover from the server or any other interactive DSN settings either. The server is clearly set for mirroring.
Another suspicious item is that the DSN cannot connect to the server with SA permissions, even though the server is set to mixed security and we use the correct authentication.
Is it possible that the client MACHINE is not authenticating with the domain or sql server properly. We are logged into the client with the domain account that is the SQL admin account on the sql server box.
We should be able to interact with the sql server settings through the ODBC DSN on the client shoulnd't we?
Are we missing a service pack on the client?
Thanks,
Kimball
View 1 Replies
View Related
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Jun 5, 2007
Hi,
I have an SSIS package which calls a web service and returns a Dataset object in the form of an xml file (it does this successfully - and stores it successfully).
The Data Flow then picks up the file using an xml source task (in which use inline schema is specified) , and passes it to an SQL Server Destination task - for bulk load.
I've checked the mappings and everything seems to be ok, the package gives no warnings or errors when run.
The destination table is created on the SQL Server without problem, but at that stage the task finishes "successfully", without actually loading any table rows into the destination table.
Also in the SQL Server Destination task - when I select "preview" in the connection manager section - I can see the column definitions, but again - no rows of data.
Thanks to Simon Sabin for pointing me here - I did post on the managed msdn newsgroups in sql server programming but have had no replies as yet.
Below is the beginning of the xml Dataset object which is output as an xml file for information. If you need any more information just let me know.
Not quite sure where i'm going wrong here - thanks in advance
Crispin.
Code Snippet
<?xml version="1.0" encoding="utf-16"?>
<DataSet>
<xs:schema id="callStatisticsDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchemahttp://www.w3.org/2001/XMLSchema">http://www.w3.org/2001/XMLSchema</A< A>>" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="callStatisticsDataSet" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="Table">
<xs:complexType>
<xs:sequence>
<xs:element name="date" type="xs:dateTime" minOccurs="0" />
<xs:element name="callID" type="xs:int" minOccurs="0" />
<xs:element name="cli" type="xs:string" minOccurs="0" />
<xs:element name="itemClosed" type="xs:string" minOccurs="0" />
<xs:element name="custProdId" type="xs:string" minOccurs="0" />
<xs:element name="itemSaleId" type="xs:string" minOccurs="0" />
<xs:element name="phoneNumber" type="xs:string" minOccurs="0" />
<xs:element name="lastXml" type="xs:string" minOccurs="0" />
<xs:element name="followedPath" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
<callStatisticsDataSet>
<Table diffgr:id="Table1" msdata:rowOrder="0">
<date>2007-06-04T08:03:10.02+01:00</date>
<callID>85560695</callID>
<cli>648477292</cli>
<itemClosed />
<custProdId>-1</custProdId>
<itemSaleId />
<phoneNumber />
<lastXml />
<followedPath>Initialize #waitList;|tvShop.CallInitiated;|Is not closed?;|No item on sale;|Store Items;</followedPath>
</Table>
View 4 Replies
View Related
Apr 12, 2008
if we installed ssis on the same server much later than the engine itself, could it have been installed successfully at an earlier service pack than the engine? I did a select @@version on the engine and got
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
I cant see a way from the client to get a service pack on ssis itself. I'd like to be sure about a suggestion from one of your contributors before approaching our technical guys about their failure to install sp 2 of something.
View 3 Replies
View Related
Aug 7, 2015
i m not able to start the SSIS service on my laptop . IT gives error saying SQL server integretion service 11.0 service on local computer started and then stopped . some services stop automatically if they are not in use by other services or program
i am not able to start SSDT . it gives error
microsoft visual studio is unabble to load this document to desigen integration service package in ssdt , ssdt has to be installed by one of these edition of sql server ; std enterprise,dev,or evloution
i hav installed sql 2012 evolution verison on my local desktop.
View 1 Replies
View Related
Aug 5, 2006
I have done a full Sql Server install on a server and the SSIS service is not available. Normally when I load Sql Server I get €œSQL Server Integration Services" as a service that I can start. On this machine it is not listed after the install. I don't get any errors through out the install.
Please Help!
Steve
View 1 Replies
View Related
Jan 16, 2008
I need to read in general web pages (not a web service) from a typical web site using SSIS and make it available for other SSIS transformations (Script Component). I tried using the XMLSource data source but this appears to require well formed XML, and will not accept HTML which is what I am likely to be getting from the web pages.
I tried a HTTP Connection Manager with a DataReader Source, but seems to only accomodate web services.
Can this be done? If someone has an example (tutorial) of how to accomplish this I would greatly appreciate a copy.
James
View 1 Replies
View Related
Apr 27, 2006
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
View 4 Replies
View Related
Jan 22, 2007
I have to figure out a way to handle a failover in SQL Server 2005. I was reading a few articles about it.
1. Do I need to do anything in application layer to let a failover occur in SQL Server 2005
2. I have a web site that connects to a production server, the connection string is defined in web.config. If I implement Mirroring in SQL Server 2005, and when failover occurs, shouldn’t I change the connection string to point the application to the new server?
View 2 Replies
View Related
Jan 23, 2007
I have to figure out a way to handle a failover in SQL Server 2005. I was reading a few articles about it.
1. Do I need to do anything in application layer to let a failover occur in SQL Server 2005
2. I have a web site that connects to a production server, the connection string is defined in web.config. If I implement Mirroring in SQL Server 2005, and when failover occurs, shouldn€™t I change the connection string to point the application to the new server?
View 1 Replies
View Related
Jul 12, 2007
I have an almost virgin install of SQLExpres running on a WIN2K Pro system.
Have been able to create and connect db to Access 2000 without problem.
Now I wish to extend to remote connections. Using Surface Area Configuration tool, I changed Remote Connections to Local and Remote.
Whenever this setting contains TCP/IP and I try to restart the service I receive the following errors:
System Log:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 10013.
Application Log:
Server TCP provider failed to listen on [ 'any' <ipv4> 0]. Tcp port is already in use.
TDSSNIClient initialization failed with error 0x271d, status code 0xa.
TDSSNIClient initialization failed with error 0x271d, status code 0x1.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
If I change back to Local Connections Only or Local and Remote using named pipes only, the service starts up again without a problem.
After five days of investigating, researching, reinstalling and waiting I have to ask for help.
Any suggestions or leads?
Thank You in advance.
View 14 Replies
View Related
May 18, 2007
Hello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
View 1 Replies
View Related
Sep 24, 2002
Hi all,
We are the studying the possibilty of implementing SQL - Clustering for
Failover server.
Are there any third party tools readily available.
Any suggestion or checklist ??
Any suggestions or comments will be appreciated.
Thanks and have a great day.
View 1 Replies
View Related
Sep 24, 2015
I'm looking at a setup where they have server1 and server2 in a mirroring relationship with automatic failover.Â
Server1 is the principalThey are using transactional replication to replicate asingle databse to server3 is AWS.Distribution database is on Server1All Agents (log reader, snapshot, distributor) run on Server1Server2 has not been set up for replication...My understanding is that in this set up you would normallly place the distribution database on a separate server and enable publication on the mirror, Server2.
What happens if they failover? Replication would stop, and presumably records added while the mirror is the active database would not be marked for replication?How would they recover? Failback and reinintialize
View 3 Replies
View Related
Jul 23, 2015
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
View 9 Replies
View Related
Sep 18, 2006
We have a mirror setup, with a third server that needs to be linked to this mirrored setup. The link server setup only allows you to specify the primary server. How will the linked server setup know what the secondary server is? Thanks
View 1 Replies
View Related
Sep 18, 2006
We have a mirrored db setup, with a third server that needs to be linked to this mirrored setup as a linked server. The link server setup only allows you to specify the primary server. How will the linked server setup know what the secondary server is? Thanks
View 1 Replies
View Related
Aug 7, 2006
Hi,
Here is my testing environment:
Database server: SQL Server 2005 Developer Edition with SP1
Application: An application developed by Visual Studio 2005 using C# (.Net framework 2.0) and ADO .Net 2.0.
Principal server: computerA
Mirror server: computerB
Witness server: computerC
Mirroring mode: High availability with auto failover
Connection String:
Data Source=computerA;Failover Partner=computerB;Initial Catalog=test_mirroring;Persist Security Info=True;User ID=sa;
Code used for failover:
while (true)
{
thisDataSet = new DataSet();
try
{
thisConnection = new SqlConnection(connectionString);
thisAdapter = new SqlDataAdapter(SQL, thisConnection);
thisAdapter.Fill(thisDataSet, name);
break;
}
catch (SqlException e)
{
thisConnection = null;
thisAdapter = null;
thisDataSet = null;
}
}
Test Case:
(Part A) At the beginning of the test, computerA was in principal role. I started my testing application and connected to computerA without any problem. Then I disconnected the connection of computerA to the network by unplugging the network cable of computerA. The failover of database from computerA to computerB was carried out without problem. computerB was in principal role at that time. The application was pending for about 45 seconds and running again without problem. Then I re-connected computerA to network and it became the mirror server. computerB was still in principal role. Up to this point, all works fine, but the problem was coming next. (Part B) I disconnected computerB from network, database failover occurred, computerA became principal again. But my application cannot switch the database connection to computerA and then kept pending. Then, I re-connected computerB to network. It was surprised that the application switched the database connection to computerA successfully at that point.
My questions:
1. I think Part B is abnormal, isn€™t it? The application should be able to failover from computerB to computerA, because it works fine when failover from computerA to computerB.
2. Is there anything wrong in my code leads to the abnormal behavior of the application in Part B.
3. How can I achieve Part B? Any suggestion or idea?
Thanks for your attention.
View 6 Replies
View Related
Mar 14, 2008
I have 2 Windows 2003 r2 servers with a SQL failover cluster installed across the 2 node. Generally I have been running off node1 with node2 as the failover partner. I have purchased the correct licensing for noe1 and from the following I do not need to purchase a license for node2:
Failover clustering is a process where the operating system and SQL Server 2005 work together to provide availability in the event of an application failure, hardware failure, or operating-system error. Failover clustering provides hardware redundancy through a configuration in which critical resources are transferred automatically from a failing machine to an equally configured server to help ensure continuity of service.
When doing failover support, a server is designated as the passive server. The purpose of the passive server is to absorb the data and information held in another server that fails. A passive server does not need a license if the number of processors in the passive server is equal to or less than the number of processors in the active server. The passive server can take the duties of the active server for 30 days. Afterwards, it must be licensed accordingly
http://www.microsoft.com/sql/howtobuy/activepassive.mspx
My questions are:
1) If I switch my cluster instace to point to node2 for testing node2 in case of a failover, would I need to purchase another licence ? This means I am not doing the repointing because of an 'event of an application failure, hardware failure, or operating-system error' ? Can you please provide information from MS ?
2) How are SQL Licences bound to the windows install in a SQL Server failover cluster configuration ? For instance if node1 legitimately fails due to an 'event of an application failure, hardware failure, or operating-system error' and you failover to node2. Then you think, stuff (forget about) node1 as I have 1 set of licences for SQL Enterprise already and therefore can run with a legitimate licence on node2. Can you please clarify ?
3) I have heard that only one server needs a license in a failover cluster. Then how does this fit in with any of the questions from above:
'The passive server can take the duties of the active server for 30 days. Afterwards, it must be licensed accordingly' ?
In the event of a legitimate failure, node2 would be running off the license purchased. So why are MS restricting the use of it for 30 days ?
View 5 Replies
View Related
Dec 12, 2006
We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
View 3 Replies
View Related
Feb 22, 2007
Hi all,
The following query that uses a linked server is giving me the error message below after I initiate a failover (ALTER DATABASE Northwind SET PARTNER FAILOVER). I have SQL Server 2005 SP2. I think that without the service pack there is another error too.
The query is run from a database other than northwind of course.
select * from DualLink.northwind.dbo.Test1
Please note that:
without a failover it works perfectly
it always work if I try to run it a second time - only the first time it fails.
it fails the first time for each of the open connections. A new connection that was open after the failover will work fine.
A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
The linked server is defined as
EXEC master.
dbo.sp_addlinkedserver
@server = N'DualLink',
@srvproduct=N'',
@provider=N'SQLOLEDB',
@catalog=N'northwind',
@provstr=N'Server=(local);FailoverPartner=MyIPAddr;'
EXEC master.dbo.sp_addlinkedsrvlogin
@rmtsrvname = 'DualLink',
@useself = false,
@locallogin = 'sa',
@rmtuser = 'sa',
@rmtpassword = 'MyPwd'
Thanks,
Avi
View 1 Replies
View Related
Jul 30, 2007
Hi all,
I do understand that it is highly recomended to have aserprate user (perfered a domain user account) for each of the SQL Server service and SQL Agent service.
What is the reason behind that? (Someone told me to not run the service with an account that has a powerul privilegs! - I don't undrstanmd this point can you explain it please?)
What is the diffrent between: 1- Local System account 2 -Network Service account
Thanks in advanced!
CS4Ever
View 4 Replies
View Related
Jan 18, 2015
I have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies
View Related
Sep 13, 2006
I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
View 1 Replies
View Related
Jul 20, 2005
We have a clustered sql server 2000 installation on windows 2000. Werecently lost the select into/bulkcopy option from a database. Themost likely candidate appears to be a failover just before - afterthis happened the setting disappeared. Any ideas?ThanksTom
View 1 Replies
View Related
Apr 16, 2008
Hi all,
I need some help to known more about basics of SQL Server 2005 failover cluster . pls provide me link to
known the concept.
Thanks,
Nav
View 6 Replies
View Related
Mar 15, 2006
Hi there.
I´m running some tests in a database with Mirroring and without Mirroring. As expected there is a performance hit using Database mirroring.
The tests i´m running are just simple functions inserting and updating the database, and then counting the number of sucedeed inserts and updates in a time interval.
My question here is: What if i use Sql Server failover mechanism?
I know that failover time will increase and management is more complex, but what can i expect in terms of performance ?
View 8 Replies
View Related
